Comcast M1067A User Manual

OVERVIEW

The Comcast Custom DVR 3-Device universal remote will control up to three home entertainment devices, including a Digital Video Recorder enabled Cable Box (used by Comcast Systems).

The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference.

INSTALLING BATTERIES

1. Pull back the remote control’s battery cover and remove it.

2. Insert the two (2) supplied AA

batteries according to the + and

marks in the battery case.

3. Push the battery cover back into place.

4. Test the unit by pressing any mode key (i.e.,

AUX, TV

, or

Cable

). If batteries are inserted correctly, the selected mode key will light.

NOTE: When the batteries need to be replaced, the remote control will stop working. Replace the old batteries and the unit will be restored to its full functionality, complete with your favorite settings.

FEATURES AND FUNCTIONS

Use the remote control’s mode keys (i.e.,

AUX, TV

, or

Cable

) to control a specific device. When pressed, the selected mode key will light, confirming your choice. Use the other keys to perform desired actions (see the following key chart).

NOTE: The selected mode will remain active until you press another mode key.

Press

AUX, TV

, or

Cable

once to select and control a device.

Press

Power

once to turn on or off the selected home entertainment device.

Use

Setup

for all programming sequences.

Press

All On

once to turn on or off all programmed devices in this order:

Cable

, and

AUX

. After all

devices are on,

Cable

is the active mode.

Press ON DEMAND once to access Comcast’s ON DEMAND menu (not available in all areas).

In the

AUX

mode, use the transport keys to control a VCR, PVR, or DVD player. To record a program on a VCR, press

REC

twice.

In the

Cable

mode, use the keys to control ON DEMAND programs.

Press

REPLAY

to replay the previous few seconds of a program.

Press

My DVR

to show a list of programs that have been recorded.

Press

LIVE

to return to

watching live TV.

Use

A, B

, or Cto access interactive program guide functions on your Scientific Atlanta Explorer, Pioneer Voy ager, o r PAC E cable box.

Use

Page+

(or

Page–

) to page up (or down) through menu screens and the interactive program guide.

Use

Guide

to display the interactive program guide.

Use these keys to move the cursor in the interactive program guide and menu screens.

Use

OK (Select)

to select

menu options, PPV

events, and programs from the interactive program guide.

Use

Info

to display current channel and program information.

Use

to display the Quick Menu (on a Motorola, GI, or Jerrold Cable Box), or to access settings (on a Scientific Atlanta Explorer, Pioneer Voy ager, o r PAC E cable box).

Use

Exit

to exit the

menu or guide.

Use

Help

to access

digital cable help.

Use

Last

to recall the last channel or go back one screen in the menu.

Use

VOL+

(or

VOL-)

to raise (or lower) the sound volume. Also see

Changing Volume

Lock

Press

Mute

once to

turn sound off or on.

In the Cable mode, press

FAV

once to display programmed favorite cable channels.

Use

CH+

(or

CH-) to

select the next higher (or lower) channel.

When controlling a DVD player, use

CH+

(or

CH-) to skip for-

ward (or skip reverse) through video.

Use the keypad (

0~ 9

) to directly select the channels (e.g., 09 or

031).

In the TVmode, use this key to switch the TV’s input to view TV or video programs.

In the

AUX

mode, use this key to switch the VCR, PVR (or DVR), or DVD player to view TV or video. For an audio device, use it to switch to an input source.

Use

Enter

to enter channels on some TV models or information on menu screens.

Press

PIP On-Off

to display the PIP Wind ow.

>Use

PIP Swap

to switch the images and sound between the main and window pictures.

Use

PIP Move

to move the picture to different positions in the main picture.

Use

PIP CH +

(or

CH -

) to select the next higher or lower PIP channel.

PROGRAMMING DEVICE CONTROL

The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the

AUX

mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section:

Turn on a device (e.g., VCR or DVD Player) and, if applicable, insert media, (e.g., video cassette or disc).

NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.

2. On the remote control, press a device key once (i.e.,

AUX

or TV).

NOTE: Use the

AUX

key to program control of an Audio Amplifier or Receiver, a DVD Player, a HomeTheater-In-A-Box Device, a PVR (or DVR), or a VCR.

3. Press and hold

Setup

until the selected mode key blinks twice, then release

Setup

4. Locate the code for your device in Manufacturer’s Codes

on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.

5. Enter the first four-digit code for your device. If you perform this procedure correctly, the selected mode key will blink twice.

NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.

6. Aim the remote control at your device and press

Power

once. The device should turn off. If it does not respond, repeat steps 2 to 6, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.

NOTE: If the device does not have a

Power

key, press the (

Play

) key.

7. For future reference, write your device code in the appropriate boxes below:

AUX Code

Device Type:______________

TV Code

8. Repeat steps 1 to 7 for another device you want to control.

SEARCHING FOR YOUR CODE

If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then:

1. Turn on your TV.

2. On the remote control, press

once. Then press and hold

Setup

until the TVkey blinks twice, then release

Setup

3. Enter

9- 9- 1

. The TVkey will

blink twice.

4. Aim the remote control at the the TV and slowly alternate between pressing

Power

and TV.

Stop when the TV turns off. A working code has been found.

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

5. Press

Setup

once to lock in the

code.The TVkey will blink twice.

6. To search for the codes of another device, repeat steps 1 to 5, but substitute the

AUX

key for the aux-

iliary device you are searching for.

CHECKING THE CODES

If you have set up the remote control using the

Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. Perform the following steps after setting up your devices to find out which four-digit code operates your equipment. For example, to find out which code is operating your TV:

1. Turn on your TV.

2. On the remote control, press

once. Then press and hold

Setup

until the TVkey blinks twice, then release

Setup

3. Enter

9- 9- 0

. The TVkey will

blink twice.

4. To view the code for the first digit,

press

once. Wait 3 seconds and count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box (at end of this section).

NOTE: If a code digit is “0”, the selected mode key will not blink.

5. Repeat step 4 three more times for the remaining digits. Use 2for the

second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes (at end of this section).

6. To check another device code, repeat steps 1 to 5, but substitute the

AUX

key for the auxiliary device you are checking. Write down the codes in the appropriate boxes below:

AUX Code

Device Type:______________

TV Code

CHANGING VOLUME LOCK

The Comcast Custom 3-Device universal remote control

is set at the factory to

control the TV volume in all modes.

However, you may change the Volume Lock setting to Individual Volume Unlock to unlock a specific device’s volume controls for independent operation in its own mode (e.g., Audio Receiver volume controls in the AUX mode).

Or, if desired, you can perform Global Volume Unloc k so that the volume controls of all devices can be independently operated in their own modes.

Unlocking Volume Control For A Single Device (Individual Volume Unlock):

1. Press a desired mode key where you want volume to be unlocked (e.g.,

AUX

) and controlled within

its own mode.

2. Press and hold

Setup

until the selected mode key blinks twice, then release

Setup

3. Enter

9- 9- 3

and then press

VOL-

once. The mode key will blink four times confirming unlock.

4. If desired, repeat steps 1 to 3 (of this section) for each device that you want volume to be unlocked.

5. Now, after you select a device that has volume unlocked (e.g.,

AUX

pressing

VOL+, VOL-

, or

Mute

, will control the device’s volume only in its own mode.

Unlocking All Volume Controls (Global Volume Unlock):

1. Press and hold

Setup

until the selected mode key blinks twice, then release

Setup

2. Enter

9- 9- 3

and then press

VOL+

once. The mode key will blink four times confirming unlock.

3. Now, volume controls for all devices can be independently controlled in their own modes.

Locking Volume Control To TV or AUX Mode:

1. Press and hold

SETUP

until the Red light flashes twice, then release

SETUP

2. Enter

9- 9- 3

(Red light will flash

twice).

3. Press and release either TV or AUX

(Red light for selected device will flash twice).

REASSIGNING DEVICE KEYS

The Comcast Custom 3-Device universal remote control can be set up to control a second device.

For example, to have the unit control a TV, a Cable Box, and second TV, you will need to reassign the unused

AUX

key to operate the second TV as follows:

1. On the remote control, press

AUX

once. Then press and hold

Setup

until the

AUX

key blinks twice,

then release

Setup

2. Enter

9- 9- 2

. The

AUX

key will

blink twice.

3. Press

once, then press

AUX

once. The

AUX

key will blink

twice.

4. The

AUX

key is now ready to be programmed for your second TV. See

Programming Device Contro

for instructions.

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are locked to the Cable Box. The affected keys are

0 ~ 9

CH+, CH-, Enter

, and

Last

This will guarantee that you do not inadvertently change a channel while in the TV mode. However, you can turn off this feature to allow full access to these keys in the

and

Cable

modes.

NOTE: This feature does not affect the

AUX

mode.

De-Activating Channel Control Lock

1. On the remote control, press

Cable

once. Then press and hold

Setup

until the

Cable

key blinks

twice, then release

Setup

2. Enter

9- 7- 3

. Press

CH-

once.

The

Cable

key will blink four

times.

3. Now, the remote control will provide TV or cable channel control capabilities while in the

Cable

mode.

Re-Activating Channel Control Lock

1. On the remote control, press

Cable

once. Then press and hold

Setup

until the

Cable

key blinks

twice, then release

Setup

2. Enter

9- 7- 3

. Press

CH+

once.

The

Cable

key will blink twice.

3. Now, regardless if you select the

Cable

mode, only the channel control capability of your cable box will be accessible.

TROUBLESHOOTING

PROBLEM:

A mode key does not blink when you press a key.

SOLUTION: Replace the batteries with

two (2) new AA batteries.

PROBLEM: During programming, a

mode key displays one long blink.

SOLUTION: An invalid entry has

occurred. Check the key to be entered and try programming again.

PROBLEM: A mode key blinks when

you press a key, but home entertainment component does not respond.

SOLUTION: Make sure the remote

control is aimed at your home entertainment device and is not farther than 15 feet away.

PROBLEM: The remote control does

not control home entertainment devices or the commands are not working properly.

SOLUTION: Try all listed codes for

the device brands being set up. Make sure they can be operated with an infrared remote control.

PROBLEM:

CH+, CH-, and Last do not work for your RCA TV.

SOLUTION: Due to RCA design

(1983–1987), only the original remote control will operate these functions.

PROBLEM: Changing channels does

not work properly.

SOLUTION: If original remote control

required pressing

Enter

to change channels, also press

Enter

on this remote control after entering the channel number.

Comcast Custom DVR 3-Device

Universal Remote Control

User Guide

MANUFACTURER’S CODES

Setup Codes For Audio Amplifiers

Carver 0269 GE 0078 JVC 0331 Linn 0269 Luxman 0165 Magnavox 0269 Marantz 0321, 0269 Nakamichi 0321 Philips 0269 Polk Audio 0269 Sansui 0321 Soundesign 0078 Victor 0331 Wards 0078 Yamaha 0354

Setup Codes For Audio Receivers

ADC 0531 Aiwa 0158, 0189, 0405 Bose 1229 Capetronic 0531 Carver 0189 Denon 1360, 1104 Harman/Kardon 0110, 0189 Integra 0135 JBL 0110 JVC 0074 Kenwood 1313, 1570, 0027, 1027 Linn 0189 Magnavox 0189, 0531 Marantz 0189

Marantz 1039

MCS 1039 Onkyo 0135, 0842 Optimus 1023, 0531 Panasonic 1518 Panasonic 1039 Philips 0189, 1266 Pioneer 1023, 0014, 1384, 0531 Polk Audio 0189 Proscan 1254

Quasar 1039 RCA 1023, 1254, 0531 Sansui 0189 Sony 1759, 0158, 1758 Stereophonics 1023 Sunfire 1313 Technics 1308, 1518

Technics 1039 Victor 0074 Wards 0158, 0189, 0014 Yamaha 0176, 1176

Setup Codes For Cable Boxes

ABC 0003, 0008, 0017 Director 0476 General Instrument 0476, 0276, 0003 GoldStar 0144 Hamlin 0009 Jerrold 0476, 0276, 0003, 0012 Memorex 0000 Motorola 0476, 0276, 1376 MultiVision 0012 Pace 1877 Panasonic 0000 Paragon 0000 Pioneer 0877, 1877, 0144, 0533 Pulsar 0000 Quasar 0000 Runco 0000 Samsung 0144 Scientific Atlanta 0877, 1877, 0477, 0008, 0017 Starcom 0003

Supercable 0276 Tocom 0012 Torx 0003 Toshiba 0000 Zenith 0000

Setup Codes For Digital Video Disks

Anam 1913 Apex Digital 0672, 0717, 0794, 1915, 0755,

0797, 0796 Blaupunkt 0717 Blue Parade 0571 Broksonic 0695 Denon 0490, 0634 DVD2000 0521 Emerson 0591, 0821, 0675 Enterprise 0591 Fisher 0670 Funai 0675 GE 0522, 0717 Go Video 0783, 0715 Greenhill 0717 Harman/Kardon 0582 Hitach 0573, 0664 Hiteker 0672 Initial 0717 JVC 0558, 0623, 0867 Kenwood 0490, 0534, 0682 KLH 0717 Koss 0651 Lasonic 0798 Magnavox 0503, 0821, 0675, 1914 Marantz 0539 Memorex 0695 Microsoft 0522 Mintek 0717 Mitsubishi 0521 Nesa 0717 Onkyo 0503 Oritron 0651 Panasonic 0490, 1490, 0632, 1907 Philips 0503, 0539, 0854, 1914 Pioneer 0525, 0571, 0632 Polk Audio 0539 Proscan 0522 Qwestar 0651 RCA 0522, 0571, 0717, 1022, 0822,

1913, 1132 Rotel 0623 Sampo 0698 Samsung 0490, 0573, 0820, 1932 Sansui 0695 Sanyo 0670, 0695 Sharp 0630 Shinsonic 0533 Sony 0533, 0864, 1903, 1904 Superscan 0821 Sylvania 0821, 0675 Symphonic 0675 Technics 0490 Theta Digital 0571 Toshiba 0503, 1045, 0695 Urban Concepts 0503 Xbox 0522 Yamaha 0490, 0539, 0545 Zenith 0503, 0591

--- HTiB (Y) --Anam 1913 Apex Digital 1915 Koss 0651 Oritron 0651 Panasonic 1907 Philips 1914 Polk Audio 0539 RCA 1913 Samsung 1932 Sony 1904, 1903

Setup Codes For DVD Players

Anam 1913 Apex Digital 0672, 0717, 0755, 0794, 0796,

0797, 1915 Blaupunkt 0717 Blue Parade 0571 Broksonic 0695 DVD2000 0521 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522, 0717 Go Video 0715, 0783 Gradiente 0651 Greenhill 0717 Harman/Kardon 0582 Hitachi 0573, 0664 Hiteker 0672 IRT 0783 JVC 0558, 0623, 0867 KLH 0717 Kenwood 0490, 0534, 0682 Koss 0651 Lasonic 0798 Magnavox 0503, 0675, 1914 Marantz 0539 Microsoft 0522 Mintek 0717 Mitsubishi 0521 Nesa 0717 Onkyo 0503 Oritron 0651 Panasonic 0490, 0632, 1490, 1907 Philips 0503, 0539, 0854, 1914 Pioneer 0525, 0571, 0632 Polk Audio 0539 Proscan 0522 Qwestar 0651 RCA 0522, 0571, 0717, 0822, 1022,

1913 Rotel 0623 Sampo 0698 Samsung 0573, 0820, 1932 Sansui 0695 Sanyo 0670, 0695 Sharp 0630 Shinsonic 0533 Sony 0533, 0864, 1903, 1904 Sylvania 0675, 0821 Technics 0490 Theta Digital 0571 Toshiba 0503, 0695, 1045 Urban Concepts 0503 XBox 0522 Yamaha 0490, 0539, 0545 Zenith 0503, 0591

Setup Codes For Home-TheaterIn-A-Box Devices

Anam 1913 Apex Digital 1915 Panasonic 1907 Philips 1914 RCA 1913 Samsung 1932 Sony 1903, 1904

Setup Codes For PVRs (or DVRs)

Panasonic 0616 Philips 0618 ReplayTV 0616 Sonic Blue 0616 Sony 0636 Tivo 0618, 0636

Setup Codes For TVs

A-Mark 0003 Admiral 0093, 0463 Advent 0761, 1933, 0842 Adventura 0046 Aiko 0092 Aiwa 0701 Akai 0702, 0030 Alaron 0179 Albatron 0843 Ambassador 0177 America Action 0180 Ampro 0751 Anam 0180 AOC 0030, 0003 Apex Digital 0748, 0765, 0879 Archer 0003 Audiovox 0451, 0180, 0092, 0003 Bell & Howell 0154, 0016 Bradford 0180 Broksonic 0236, 0463, 0003 Candle 0030, 0046, 0186, 0056 Carnivale 0030 Carver 0054 Celebrity 0000 Celera 0765 Changhong 0765 Citizen 0060, 0030, 0056, 0186, 0046,

0092, 0280 Clarion 0180 Concerto 0056 Contec 0180 Craig 0180 Crosley 0054 Crown 0180 Curtis Mathes 0047, 0054, 0154, 0451, 0093,

0060, 0702, 0030, 0145, 0166, 0466, 0056, 0016 CXC 0180 Daewoo 0451, 0092 Denon 0145 Dumont 0017 Durabrand 0180, 0178, 0003 Dwin 0720, 0774 Electroband 0000 Elektra 0017 Emerson 0154, 0236, 0463, 0180, 0178,

0171, 0282, 0179, 0280, 0038, 0177 Envision 0030 Fisher 0154 Fujitsu 0809, 0683, 0179 Funai 0180, 0171, 0179 Futuretech 0180 Gateway 1756, 1755 GE 0047, 0051, 0451, 0178, 0282,

0027, 0021 Gibralter 0017, 0030 GoldStar 0030, 0178, 0001 Grunpy 0180, 0179 Hallmark 0178 Harley Davidson 0179 Harman/Kardon 0054 Harvard 0180 Havermy 0093 Hello Kitty 0451 Himitsu 0180 Hisense 0748 Hitachi 0145, 0016, 0056, 0038, 0151 Infinity 0054 Inteq 0017 Janeil 0046 JBL 0054 JCB 0000 Jensen 0761, 1933 JVC 0053 KEC 0180 Kenwood 0030 KLH 0765 Kloss 0046 Konka 0707

KTV 0180, 0030, 0280 Logik 0016 Luxman 0056 LXI 0047, 0054, 0154, 0156, 0178 Magnavox 0054, 0030, 0706, 0186, 0179 Majestic 0016 Marantz 0054, 0030 Matsushita 0250 Megatron 0178, 0145, 0003 Memorex 0154, 0463, 0150, 0178, 0179,

0016 MGA 0150, 0030, 0178 Midland 0047, 0017, 0051 Minutz 0021 Mitsubishi 0093, 0150, 0178 Monivision 0843 Motorola 0093 MTC 0060, 0030, 0056 Multitech 0180 NAD 0156, 0178 NEC 0030, 0497, 0056 Nikko 0030, 0178, 0092 Norcent 0748 NTC 0092 Onwa 0180 Optimus 0154, 0250, 0166 Optonica 0093, 0165 Orion 0236, 0463, 0179 Panasonic 0250, 0051 Penney 0047, 0156, 0051, 0060, 0030,

0178, 0003, 0027, 0021 Philco 0054, 0030 Philips 0054, 0690 Pilot 0030 Pioneer 0166, 0038 Portland 0092 Prima 0761, 1933 Prism 0051 Proscan 0047 Proton 0178, 0003, 0466 Pulsar 0017 Quasar 0250, 0051, 0165 RadioShack 0047, 0154, 0180, 0030, 0178,

0165, 0056 RCA 0047, 0038, 0090 Realistic 0154, 0180, 0030, 0178, 0165,

0056 Runco 0017, 0030, 0603, 0497 Sampo 0030, 1755 Samsung 0060, 0702, 0030, 0178, 0056 Sansui 0463 Sanyo 0154 Scotch 0178 Scott 0236, 0180, 0178, 0179 Sears 0047, 0054, 0154, 0156, 0178,

0171, 0056, 0179 Sharp 0093, 0165 Sheng Chia 0093 Signature 0016 Simpson 0186 Sony 0000, 0111 Soundesign 0180, 0178, 0186, 0179 Spectricon 0003 Squareview 0171 SSS 0180 Starlite 0180 Studio Experience 0843 Supre-Macy 0046 Supreme 0000 SVA 0748, 0865 Sylvania 0054, 0030, 0171 Symphonic 0180, 0171 Tandy 0093 Tatung 0003, 1756 Technics 0250, 0051 Technol Ace 0179 Techwood 0051, 0003, 0056 Teknika 0054, 0180, 0150, 0060, 0056,

0186, 0092, 0016, 0179 Telefunken 0702, 0056

TMK 0178, 0056, 0177 TNCi 0017 Toshiba 0154, 0156, 0060 TVS 0463 Universal 0027 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0178 Viewsonic 1755 Viking 0046 Wards 0054, 0030, 0178, 0021, 0165,

0016, 0111, 0179, 0027, 0056 Waycon 0156 White Westinghouse 0463 Yamaha 0030 Zenith 0017, 0463, 0178, 0016, 0092 Zonda 0003

Setup Codes For VCRs And TV/VCR Combos

Admiral 0048, 0209 Adventura 0000 Aiwa 0037, 0000 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0209, 1479 Calix 0037 Canon 0035 Carver 0081 Citizen 0037, 1278 Craig 0037, 0047, 0240 Curtis Mathes 0060, 0035, 0162, 1035 Cybernex 0240 Daewoo 0045, 1278 Denon 0042 Durabrand 0039 Dynatech 0000 Electrohome 0037 Electrophonic 0037 Emerex 0032 Emerson 0037, 0184, 0000, 0043, 0209,

1479, 1278 Fisher 0047, 0104 Fuji 0035 Funai 0000 Garrard 0000 GE 0060, 0035, 0240, 0807, 1060,

1035 GoldStar 0037, 1237 Gradiente 0000 Harley Davidson 0000 Harman/Kardon 0081 HI-Q 0047 Hitachi 0000, 0042 Hughes Network Systems 0042 JVC 0067 KEC 0037 Kenwood 0067 Kodak 0035, 0037 Lloyd's 0000 LXI 0037 Magnasonic 1278 Magnavox 0035, 0039, 0081, 0000, 1781 Magnin 0240 Marantz 0035, 0081 Marta 0037 Matsushita 0035, 0162 MEI 0035 Memorex 0035, 0162, 0037, 0048, 0039,

0047, 0240, 0000, 0104, 0209, 1237 MGA 0240, 0043 MGN Technology 0240 Minolta 0042 Mitsubishi 0067, 0043, 0807 Motorola 0035, 0048

MTC 0240, 0000 Multitech 0000 NEC 0104, 0067 Nikko 0037 Noblex 0240 Olympus 0035 Optimus 0162, 0037, 0048, 0104 Orion 0184, 0209, 1479 Panasonic 0035, 0162, 1035, 0616, 0225 Penney 0035, 0037, 0240, 0042, 1237,

1035 Pentax 0042 Philco 0035 Philips 0035, 0081, 0618 Pilot 0037 Pioneer 0067 Polk Audio 0081 Profitronic 0240 Proscan 0060, 1060 Pulsar 0039 Quasar 0035, 0162, 1035 RadioShack 0000 Radix 0037 Randex 0037 RCA 0060, 0240, 0042, 1035, 0807,

1060 Realistic 0035, 0037, 0048, 0047, 0000,

0104 ReplayTV 0616 Runco 0039 Samsung 0240, 0045 Sanky 0048, 0039 Sansui 0000, 0067, 0209, 1479 Sanyo 0047, 0240, 0104 Scott 0184, 0045, 0043 Sears 0035, 0037, 0047, 0000, 0042,

0104, 1237 Sharp 0048, 0807 Shogun 0240 Sonic Blue 0616 Sony 0035, 0032, 0000, 0636, 1232 STS 0042 Sylvania 0035, 0081, 0000, 0043, 1781 Symphonic 0000 Teac 0000 Technics 0035, 0162 Teknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 TMK 0240 Toshiba 0045, 0043 Totevision 0037, 0240 Unitech 0240 Vector 0045 Video Concepts 0045 Videomagic 0037 Videosonic 0240 Villain 0000 Wards 0060, 0035, 0048, 0047, 0081,

0240, 0000, 0042 White Westinghouse 0209 XR-1000 0035, 0000 Zenith 0039, 0000, 0209, 1479

ADDITIONAL INFORMATION

The Comcast Custom 3-Device remote control does not have any user serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your remote control.

No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Comcast, Inc.

The stylized Comcast logo is a registered trademark in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Copyright Comcast, Inc., 2003.

M1067A 11/04

Comcast M1067A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual