Comcast Conference System, Skype on XFINITY Getting Started Manual

Page 1
Open Me First
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR Power
Ethernet Camera Audio
Back
Front Top
WPS
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care sta at
877-704-7713 for assistance.
On/O Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is o.
Clip
Adjust for
placement.
Microphones Microphones
ADAPTOR BOX DETAILS CAMERA DETAILS
Skype™ on XFINITY
Getting Started Guide
Page 2
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Remote
1
CHECK THE BOX
Page 3
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
TV
A/V Receiver
OFF
Turn o TV, XFINITY set-top box and A/V receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
During setup, you’ll connect to the Internet and create a Skype on XFINITY profile. Save time and have the following handy before you begin:
+
- Comcast ID
- Comcast Password
Your Comcast ID is the username for your @comcast.net email address. Visit https://customer.comcast.com if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account? Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
Page 4
Connect the power cable to the adaptor box and plug in to an electrical outlet.
THIS ADAPTOR BOX DOES NOT HAVE AN ON/OFF BUTTON. PLUGGING IT IN (AND OUT) IS HOW YOU WILL TURN THE SYSTEM ON AND OFF.
Camera USB IRAudio
Reset
Power
HDMI
TV Out
HDMI
Back of Adaptor Box
Network Messages Power
SD Card
Adaptor Box
Camera with Clip
Power Cable HDMI Cable (2x)
Note: You may not need both HDMI cables if you already have one in use.
Power Adaptor USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
TV
A/V Receiver
OFF
Turn o TV, XFINITY set-top box and A/V receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
During setup, you’ll connect to the Internet and create a Skype on XFINITY profile. Save time and have the following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet cable not provided
Camera USB
IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet cable (not provided) into the Ethernet port on the adaptor box then plug the other end into your modem/router.
OR
Wireless: Skip this step and follow the instructions during TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username for your @comcast.net email address. Visit https://customer.comcast.com if you dont know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Dont have a Skype account? Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your Network Name (SSID) and Password (Key).
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
4
PLUG IN POWER CABLE
Page 5
Connect an HDMI cable from your TV to your adaptor box.
Use a second HDMI cable to connect the adaptor box to your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from your TV to the adaptor box.
Use another HDMI cable to connect the adaptor box to your A/V receiver.
Connect a third HDMI cable from your A/V receiver to your XFINITY set-top box.
If you don’t have an A/V receiver, use the HDMI cable to connect your adaptor box directly to your XFINITY set-top box.
If using SPDIF (optical digital audio) cable
Disconnect this cable from your XFINITY set-top box and plug it into the Audio port on the adaptor box.
For optimal performance, use both HDMI and SPDIF cables to connect the adaptor box to your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
REMOTE DETAILS
Front Back
Visit xfinity.com/remotes to use your remote to control your TV and A/V receiver.
Navigate Home
Accept incoming calls and access contacts
Go back to previous screen
6
CONNECT TO YOUR TV
8
Need assistance with a more advanced setup? Call 1-800-XFINITY.
Page 6
Flat SurfaceTV Top
Back of TV
OR
Pivot to Position
Back of Adaptor Box
Camera
Camera
USB IRAudio
Ethernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
If needed, use the USB extension cable (provided) during placement, then plug the camera cable into the adaptor box. The camera should not be used near strong magnetic fields.
Important Note for Wall-Mounted TVs
Ensure that the combined weight of the camera (8.81 oz.) and TV do not exceed your wall mount’s maximum rating. The camera clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.
Important Note for Fireplace-Mounted TVs
The camera is not intended for use in high-temperature locations, such as above fireplaces.
Connect an HDMI cable from your TV to your adaptor box.
Use a second HDMI cable to connect the adaptor box to your XFINITY set-top box.
XFINITY
Set-Top Box
Back of Adaptor Box
TV
Messages
Power
XFINITY
Set-Top Box
A/V Receiver
Connect an HDMI cable from your TV to the adaptor box.
Use another HDMI cable to connect the adaptor box to your A/V receiver.
Connect a third HDMI cable from your A/V receiver to your XFINITY set-top box.
If you dont have an A/V receiver, use the HDMI cable to connect your adaptor box directly to your XFINITY set-top box.
If using SPDIF (optical digital audio) cable
Disconnect this cable from your XFINITY set-top box and plug it into the Audio port on the adaptor box.
For optimal performance, use both HDMI and SPDIF cables to connect the adaptor box to your A/V receiver.
Back of Adaptor Box
XFINITY
Set-Top Box
Adaptor Box
A/V Receiver
Camera
HDMI
HDMIHDMI
SPDIF OPTICAL DIGITAL AUDIO
HDMI
CAMERA USB
Messages
Power
TV
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
Without an A/V Receiver With an A/V Receiver
Network Messages Power
SD Card
Messages
Power
Camera USB IRAudioEthernet
Reset
PowerHDMI HDMI
Cable In
HDMI
TV Out
HDMI
6
CONNECT TO YOUR TV
7
POSITION AND CONNECT CAMERA
Need assistance with a more advanced setup? Call 1-800-XFINITY.
Page 7
Activate
• Turn on your TV, A/V r eceiver (if using) and XFINITY set-top box, then select the HDMI input for adaptor box.
• Wait for Welcome screen. This may take up 20 minutes.
• If no progress after 20 minutes, unplug/re-plug device or call 1-800-XFINITY.
Onscreen Setup
• Remove tab from remote’s battery compartment.
• Check that keyboard is unlocked.
• Skype on XFINITY profile = Comcast Account + Skype Account
Connect
• Already have contacts: Click Contacts to select someone to call or message.
• Don't have contacts: Click Contacts to add someone. Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
ON
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Page 8
Activate
Turn on your TV, A/ V receiver (if using) and XFINITY set-top box, then select the HDMI input for adaptor box.
Wait for Welcome screen. This may take up 20 minutes.
If no progress after 20 minutes, unplug/re-plug device or call 1-800-XFINITY.
Onscreen Setup
Remove tab from remotes battery compartment.
Check that keyboard is unlocked.
Skype on XFINITY profile = Comcast Account + Skype Account
Connect
Already have contacts: Click Contacts to select someone to call or message.
Don't have contacts: Click Contacts to add someone. Once a contact request is accepted, select to call or message.
Welcome
Setup Hi you!
Contacts
Reset
Power
ON
REMOTE DETAILS
Front Back
Key Lock
Press to prevent accidental typing while using the front of the remote.
If your remote keyboard is not working, it might be locked. Press the Key Lock button to unlock it. When you’re typing, the LED to the left of the Key Lock button will flash green with each keystroke. If the remote is locked the Key Lock button will flash red with each keystroke.
Battery compartment
CAPS
Press then release ALT for characters in blue. You will need to press/release CAPS for each character.
ALT
Press then release ALT blue. You will need to press/release ALT for each character.
Remove tab from battery compartment before use.
Share Rewind/Play/ Pause/Forward
Not available at this time.
Setup
Use to pair remote. If remote becomes unpaired, press and hold Setup, then press Call to pair again. Also use to program other functions such as controlling TV.
Note:
You can use this remote to turn on your TV and A/V receiver and adjust volume. Visit xfinity.com/remotes to access the XR3 Remote Control User Guide for more information.
Visit xfinity.com/remotes to use your remote to control your TV and A/V receiver.
Navigate Home
Close and return to TV
Switch profiles
End call and ignore incoming call
Zoom self-view
Turn your video camera on/off
Change screen layout
Place call on hold, mute mic and pause camera
Mute your microphone
Accept incoming calls and access contacts
Go back to previous screen
Navigate and select current option
Mute call
8
ACTIVATE THEN CONNECT WITH FAMILY AND FRIENDS
Page 9
Open Me First
Camera USB IRAudioEthernet
Reset
Power
HDMI HDMI
Cable In
HDMI
TV Out
HDMI
Network Messages Power
SD Card
WPS
Use for wireless setup with WPS capable routers. (Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates new messages.
Network Indicator
Glowing LED indicates connection to home network.
Power
Glowing LED indicates adaptor is on.
HDMI Cable In
HDMI TV Out
USB/IR
Power
Ethernet Camera Audio
Back
Front Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3 Printed in China
Reset
Insert a thin object to hold the internal Reset button for desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for online support.
Call our customer care sta at
877-704-7713 for assistance.
On/O Indicator
Glowing LED indicates camera is on.
Lens with Shutter
Shutter closes when camera is o.
Clip
Adjust for placement.
Microphones Microphones
IRAudio
Reset
Power
ADAPTOR BOX DETAILS CAMERA DETAILS
Loading...