Combi Hero High Chair 9850 Owner's Manual

Hero

®

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE
REFERENCE. Record the following information for quick reference.

Attach copy of sales receipt.

Instruction Manual

Note: Illustrations are only representative and not actual.

Date Purchased: _______________________________ Model Number: _______ - _______ Color ____________________________________________________

Located under the seat cushion on the seating surface.

Parts List

Make sure you have all the parts listed below before using your high chair. If any parts are miss­ing, call Consumer Affairs at 1-800-992-6624.

Seat Back Seat Base

Upper Legs

(x2)

Stabilizer Bar

Assembly (x2)

Frame

8 Snack Tray

9 Parent Tray

Combi USA, Inc. • 1962 HWY 160 W, Suite 100 • Fort Mill, SC 29708 • www.combi-intl.com

Consumer Affairs 1-800-992-6624

Tray

Towel

1 Booster Seat

2 Tray

3 Towel

4 Footrest

5 Upper Legs

6 Stabilizer Bar Assembly

7 Wheels

/!\ WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS
COULD RESULT IN SERIOUS INJURY OR DEATH.

Adult assembly required. Please follow assembly instructions carefully. Check this product
for damaged hardware, loose joints, missing parts, or sharp edges before assembly and peri­odically during use. Ensure all parts are securely locked in place before use. DO NOT use if
any parts are missing, damaged or broken. Contact Combi at 1-800-992-6624 for replacement
parts and instructions if needed. Never substitute parts.

The child should be secured in the high chair at all times by the restraining system, either
in the reclining or upright position. The tray is not designed to hold the child in the chair. It is
recommended that the high chair be used in the upright position only by children capable of
sitting upright unassisted.

/!\ Prevent serious injury or death from falls
or sliding out. Always secure child in
restraint system.

/!\ Adjust the 5-point harness according to
the size of your child. Adjust for every
recline position.

/!\ Do not adjust the height while occupied.

/!\ Never leave child unattended. Always keep
your child in view.

/!\ Never lift or carry, high chair, booster or
toddler chair while occupied.

/!\ STRANGULATION HAZARD: Do not
place product in any location where there are
cords, such as window blind cords, phone
cords, etc.

/!\ Do not force tray against child. Use only
the three adjustment positions. Always ensure
both sides of tray are locked in place.

/!\ Until child is able to get in and out of the
booster seat without help (about 2 ½ years old),
the child should be secured in the booster seat at
all times by the restraining system. The tray is not
designed to hold the child in the chair.

/!\ Prevent serious injury or death. Do not use in
motor vehicles.

/!\ It is recommended that the booster seat be used
in the upright position only by children capable of
sitting upright unassisted.

/!\ Ensure all booster seat straps are stowed and
away from seat base attachment area. Carefully
check that the booster seat is attached properly
to the seat base. Placing a child in the booster
seat with seat base that is not properly attached
could possibly cause serious injury.

High Chair: Designed for use by children up to 3 years of age. Total maximum
weight of child MUST not exceed 40 lbs. (18 kg).

Booster: Total maximum weight of child MUST not exceed 50 lbs. (23 kg).
Toddler Chair: Total maximum weight of child MUST not exceed 40 lbs. (18 kg).
Parent Tray: Total maximum weight capacity MUST not exceed 1 lb. (0.5 kg).

All products specifications are subject to change without notice. Sizes and weights are intended as guides and are approximations.
Combi® reserves the right to modify the products in its line during the course of the year. Non contractual media. Colors are as accurate as the media in which they appear allows.

©Combi USA, Inc. 2004

- 2 -

Assembly of High Chair

1. Place the seat base upright on the floor. Insert the upper legs into the seat base as
shown in figure 1a and 1b. Note the folding buttons face outward on the upper legs.

2. Press in the height adjustment levers on the seat base and slide it to the top position
on the upper legs as shown in figure 2.

figure 1a

3. Attach the stabilizer bar assembly to the upper legs by holding down the release/
locking pins, slide the stabilizer bar assembly onto the upper legs until the release/
locking pins snap into place as shown in figure 3a and 3b. (Note: The stabilizer bar
assembly will only fit into the upper legs one way.) The stabilizer bar assembly,
with the wheels, attaches at the front of the high chair.

figure 3a figure 3b

4. Align the seat back to the seat base as shown in figure 4a. Press
the sides of the seat back in slightly so the seat back will lock
into the slots on the seat base as shown in figure 4b.

figure 1b figure 2

figure 4a

5. Pull the seat back up while pulling up on the release lever until
the seat back locks into one of the recline positions as shown in
figures 5a-c.

- 3 -

figure 5a figure 5b figure 5c

figure 4b