ComAp InteliCharger 500 Reference Manual
Copyright © 2011 ComAp s.r.o.
ComAp, spol. s r.o.
Kundratka 17, 180 00 Praha 8, Czech Republic
Tel: +420 246 012 111, Fax: +420 266 316 647
E-mail: info@comap.cz,
www.comap.cz
Reference Guide
TABLE OF CONTENTS
1 Document information ...................................................................................................................... 2
2 EQUIPMENT RATING ..................................................................................................................... 3
3 ENVIRONMENT ............................................................................................................................... 3
4 PROTECTION .................................................................................................................................. 3
5 INSTRUMENTATION ....................................................................................................................... 4
6 CHARGING PROFILE...................................................................................................................... 4
7 COOLING ......................................................................................................................................... 4
8 TERMINATION ................................................................................................................................. 4
9 CONNECTION ................................................................................................................................. 5
10 APPENDIX A - Automatic Calibration Routine ........................................................................... 5
11 APPENDIX B - Manual Calibration Routine ............................................................................... 6
12 APPENDIX C - DEFAULT FACTORY ........................................................................................ 6
InteliCharger
InteliCharger 500
24V 20A Intelligent Automatic Battery
Charger
September 2012
InteliCharger 500, ©ComAp –June 2012 2
ICHG-500 - Reference Guide.pdf
1 Document information
INTELICHARGER 500 - REFERENCE GUIDE
WRITTEN BY: ALES PETRIK
©2012 COMAP LTD.
KUNDRATKA 17, PRAHA 8, CZECH REPUBLIC
PHONE: +420246012111, FAX: +420266316647
WEB: HTTP://WWW.COMAP.CZ, E-MAIL: INFO@COMAP.CZ
DOCUMENT HISTORY
REVISION NUMBER
RELATED SW. VERSION
DATE
r1 - 1.9.2012
InteliCharger 500, ©ComAp –June 2012 3
ICHG-500 - Reference Guide.pdf
2 EQUIPMENT RATING
Input Voltage Switchable 90-132 Vac or 180-264Vac 1 Ph. 47-63 Hz.
Inrush Current 45A worst case.
Maximum Input Current 8A @ 115Vac 3.2A @ 230Vac.
Output Voltage 24Vdc Nominal
Works preset to 27.5V float / 28.8V boost.
Output voltage can be adjusted but a re-calibration MUST be
performed (see section 9 of this specification).
Output Current 20A works preset.
Recommended Flooded Lead Acid.
Battery Types Sealed AGM (Sealed Lead Acid).
Gel.
Ni-Cad.
Please contact us for other battery types.
Fault Contact 1A 30V DC
3 ENVIRONMENT
Working Temp. Range -20 to +50 C.
Storage Temp. Range -40 to +85 C.
Working Humidity 20-90% non-condensing RH.
4 PROTECTION
AC Input Internal fast blow fuse.
Upstream input fuse should be fitted.
DC Output ATO blade type fuse 25A 32Vdc.
Short Circuit / Overload Constant current limiting with automatic recovery.
Over Temperature Unit will shut-down if internal temperatures are
exceeded. Automatically switches back on once the unit has cooled.
Over Voltage Output voltage shut-down. Recycle AC input power to reset.
Reverse Battery Internal diode (will blow DC output fuse).
Loading...