Color imagination SI-056 User Manual

Download

180

180 W

W Moving

Moving

Moving Head

Head

Head Beam

Beam

SI-05

SI-05 6

User

User Manual

Manual

KEEP

KEEP THIS

THIS

THIS MANUAL

MANUAL

MANUAL FOR

FOR

FOR FUTURE

FUTURE

FUTURE NEEDS

NEEDS

1. Un

Un packing

packing

Thank you for Color Imagination’s 18 0W Moving Head Beam . For your own safety, please read

this manual before installing the device. This manual covers the important information on

installation and a pplications. Please install and o perate the fixture with following instructions.

Meanwhile, please keep this manual well for future needs.

Color Imagination’s 18 0W Moving Head Beam is made of a new ty pe of high temperature

strength of engineering plastics and cast aluminum casing with nice outlook. The fixture is designed

and manufactured strictly following CE standards, complying with in ternational standard DMX512

protocol. It’s available independently co ntrolled and linkable with each other for operation. And it is

applicable for large-scale live performances, theater, studio, n ightclubs and discos.

SI-05 6 adopts powerful Osram SIRIUS HRI 180W lamp with revolutionary technology which

features high b rightness and st ability. Please carefully un pack it when you receive the fixture and

check whether it is damaged during the transportation. And please check whether the following

items are included inside the box:

Moving Head---- -----one Signal Cable----one

Omega Clamp------ -T wo User Manual----one

Safety Chain---------One

1 3

3 .

. Maintenance

Maintenance

Maintenance and

and

and Cleaning

Cleaning

The following p oints have to be considered d uring the inspection:

1) All screws for installing the devices or parts of the device have to be tightly connected and must not

be corroded.

2) There must not be any deformations on the housing, color lenses, fixations and installation spots

(ceiling, suspension, trussing).

3 ） Mechanically moved parts must not show any traces of wearing and must n ot rotate with

unbalances.

4 ） The electric power supply cables must not show any damage, material fatigue or sediments.

Further instructions depending on the installation spot a nd usage have to be a dhered by a skilled

installer and any safety problems have to be removed.

In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to

the lights.

1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to

accumulation of dust.

2) Clean the fan each week.

3) A detailed electric check by approved electrical engineer each three month, make sure that the

circuit contacts are in good condition, prevent th e poor contact of circuit from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use

alcohol or solvents.

There a re no serviceable parts inside the device. Please refer to the instructions under “ Installation

instructions ” .

Should y ou need any spare parts, please order genuine parts from y our local d ealer.

11.

11. Product

Product

Product Dimensions

Dimensions

12.

12. Product

Product

Product Overviews

Overviews

2. S

S afety

afety

afety I

I nstructions

nstructions

This device has left the factory in perfect co ndition. In order to maintain this condition and to ensure a

safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this user manual.

If the device has been exposed to temperature changes due to environmental changes, do not switch

it on immediately. The arising condensation could d amage the device. Leave the device switched off

until it has reached room temperature.

This device falls under protection-class I. Therefore it is essential that the device be earthed.

The electric connection must carry out by qualified person.

The device shall only be used with rate voltage and frequency.

Make sure that the a vailable voltage is not higher than stated at the end of this manual.

Make sure the power cord is never crimped or d amaged by sharp e dges. If this would be the case,

replacement of the cable must be done by an authorized dealer.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle t he

power cord by the plug. Never pull out the plug by tugging the power cord.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that t he device is defective, it should decrease gradually.

Please don't project the beam onto combustible substances.

Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for

smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.

If the external flexible cable or cord of this luminaire is damaged, it shall b e exclusively replaced by the

manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3. Operation

Operation

Operation Instructions

Instructions

-The moving head is for b eam effect for onsite decoration purpose .

-Don ’ t tu rn on the fixture if it’s been through severe temperature difference like after

transportation because it might damage the light due to the environment changes. So make su re

to operate the fixture u ntil it is in normal temperature .

- This light should be keep away from strong shaking during any transportation or movement.

-Don ’ t pull up the light by only the hea d, or it might cause damages to the mechanical parts.

- Don ’ t expose the fixture in overhea t, moisture or environment with too much dust when installing

it. And don ’ t lay any power cables on the floor. Or it might cause e lectronic shock to the people.

- Make sure the installation place is in good safety condition before installing the fixture.

-Make sure to put the safety chain and check whether the screws are screwed properly when

installing the fixture.

- Make sure the lens are in good condition. It’s recommended to replace the units if there are any

damages or severe scratch.

- Make sure the fixture is operated by qualified personnel who knows the fixture b efore using.

- Keep the original packages if any second shipment is needed.

- Don ’ t try to change the fixtures without a ny instruction by the manufacturer or the appointed

repairing agencies.

-It is not in warranty range if there are any malfunctions from not following the user manual to

operate o r any illegal operation, like shock short circuit, electronic shock, lamp b roke, e tc.

4. Mounting

Mounting

Mounting and

and

and Installation

Installation

Cautions:

Cautions: For added protection mount the fixtures in areas outside walking paths, seating areas,

or in areas were the fixture might be reached by unauthorized person nel .

Before mounting the fixture to any surface, make sure that the installation area can hold a

minimum point load of 10 times the device’s weight.

Fixture installation must always be secured with a secondary safety attachment, such as an

appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fixture.

Other DMX modes available

Customizable DMX channel assignment

DMX, stand-alone, master/slave, sound activated mode

DMX recorder and edit function integrated

Software update

3-pin or 5-Pin XLR serial input/output

Fan cooling system

Constant temperature readout / management function

DB rating @ 1M = 54,18db

2 x 1/4 turn fastening Omega Clamps

Electronic ballast and power supply

10.

10. Technical

Technical

Technical Specifications

Specifications

Input Voltage: AC 100V ~ 240V 50/60Hz

Light Source : 1* Osram SIRIUS HRI 180W lamp

Control S ignal: DMX512, master-slave and sound activated or auto operation

Control Ch annel: 1 4 DMX Channels

Power Consumption: 342 W

Dimensions: 315 x 359 x 514 mm

Packing Dimensions: 620*430*415mm

Net Weight: 15kg

Gross Weight: 18kg

9. Key

Key

Key Features

Features

2000 hour rated lamp source

Osram SIRIUS HRI 180W lamp ( 8400lumen, 7500 ° K, 2000h) included

5 9320 Lux @ 2,5m

2,5 ° beam angle

No need for adjustment o f reflector or lamp

Anti-reflection lenses

1 color wheel with total 13 colors plus open

Variable direction rainbow effect with speed adjustable

1 rotatable gobo wheels with 12 rot atable, indexable a nd interchangeable gobos plus open

Variable speed gobo scrolling in both directions

12.0mm outside, 8mm image diameter (Gobo Size )

1 rotatable and indexable 8 -facet prism with speed adjustable and variable direction

Macro-function for rotat able gobo/prism combinations

Variable Frost Filter (Hybrid effect for Wash)

Dual flag mechanical dimming sy stem

Variable speed strobe effect

Preset variable/random strobe and dimming pulse effects

Motor driven focus from near to far

540 ° /630 ° P AN and 2 65 ° TIL T movement

Automatic Pan / Tilt position correction

16 bit smooth and precise resolution for PAN/TILT movement

Motors for fast and accurate Pan / T ilt positioning

Vector Mode with blackout MIB function

Blue LCD Display

1 4 DMX channels USITT DMX-512 (16-bit resolution)

from a ceiling, or set on a f lat level surface (see illustration below). Be sure this fixture is kept at

least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).

Always use and install the supplied safety cable as a safety measure to prevent accidental damage

and/or injury in the event the clamp fails.

Mounting

Mounting points

points

points :

: Overhead mounting requires extensive experience, including amongst others

calculating working load limits, a fine knowledge of the installation material being used, and

periodic safety inspection of all installation material and the fixture. If you lack these qualifications,

do not attempt the installation yourself. Improper installation can result in bodily injury.

Be sure to complete all rigging and installation procedures before connecting the main power

cord to the appropriate wall outlet.

Clamp

Clamp Mounting

Mounting

Mounting :

: The Beam provides two unique mounting bracket assembly s that integrates

the bottom of th e base, th e included “ Omega Bracket, ” and the safety cable rigging p oint in one

unit (see the illustration below). When mounting this fixture to truss be sure to secure an

appropriately rated clamp to the included omega bracket using a M1 0 screw fitted through the

center h ole of the “ omega bracket”. As an added safety measure be sure to attached at least one

properly rated safety cable to the fixture using on of the safety cable rigging point integrated in

the base assembly .

Regardless of the rigging option you choose for your BEAM , always be sure to secure your fixture with a

safety cable. The fixture provides a built-in rigging point for a safety cable on t he hanging bracket as

illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a

safety cable t o a carrying h andle.

5. DMX-512

DMX-512

DMX-512 control

control

control connections

connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the

male 3-pin XLR input of the moving head. Y ou can chain multiple m oving head together through serial

linking. The cable needed should be two core, screened cable with XLR input a nd output connectors.

Please refer to the diagram below.

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,

such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption

of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω

resistor connected between pins 2 and 3 ,which is then plugged into the output XLR socket of the last

fixture in the chain. Please see illustrations below.

PIN 3

PIN 3 PIN 2

PIN 2

120

224-255 Shutter open

9 7 2 Dimmer 0-255 0-100% Linear dimmer

10 8 6 Focus 0-255 In(near) to out(far)

11 9 7

Rrotating

prism,

Prism ,

Gobo

macros

0-005 OFF

006-127 ON

128-189 Forwards rotation from fast to slow

190-193 Prism rotation stop

194-255 Backwards rotation from slow to fast

12 10 8 Frost

0-099 Frost of f

100-255 Frost on

13 11 11

Speed

P an/ Ti l t

0-225 M ax to min speed

226-235 B lackout by movement

236-245 B lackout by all wheel changing

246-255 N o function

14 12 12 Special

0-019 No function

020-029 No function

030-039 No function

040-059 Lamp on

060-079 Lamp switch off

080-099 Motor reset

100-119 Internal p rogram 1

120-139 Internal p rogram 2

140-159 Internal p rogram 3

160-179 Internal p rogram 4

180-199 Internal p rogram 5

200-219 Internal p rogram 6

220-239 Internal p rogram 7

240-255 Internal p rogram 8

6 4 4 Gobo 1

048-055 Gobo 6

056-063 Gobo 7

064-071 Gobo 8

072-079 Gobo 9

080-087 Gobo 10

088-095 Gobo 11

096-103 Gobo 12

104-111 Gobo 1 shake from slow to fast

112-119 Gobo 2 shake from slow to fast

120-127 Gobo 3 shake from slow to fast

128-135 Gobo 4 shake from slow to fast

136-143 Gobo 5 shake from slow to fast

144-151 Gobo 6 shake from slow to fast

152-159 Gobo 7 shake from slow to fast

160-167 Gobo 8 shake from slow to fast

168-175 Gobo 9 shake from slow to fast

176-183 Gobo 10 shake from slow to fast

184-191 Gobo 1 1 shake from slow to fast

192-199 Gobo 1 2 shake from slow to fast

200-255 Rot. gobo wheel cont. rotation from slow to fast

7 5 5

Gobo 1

rotation

0-003 Gobo rotation stop

004-127 Forwards gobo rotation from fast to slow

128-131 Gobo rotation stop

132-255 Backwards gobo rotation from slow to fast

8 6 1

Shutter ,

Strobe

0-031 Shutter closed

032-063 S hutter open

064-095 Stro be effect slow to fast

096-127 S hutter open

128-159 Pulse strobe effect in sequences from slow to fast

160-191 S hutter open

192-223 Random s trobe effect from slow to fast

6. Menu

Menu Operations

Operations

Function Mode DMX Address A 001~AXXX

Set to slave

Auto Run Internal Program1~8 Master/Alone

Music Co ntrol Internal Program1~8 Master/Alone

Reset O n/Off

Reverse Pan On/Off

Reverse Tilt On/Off

Mic sensitivity 0~99% Sensitivity of mic

Special Reset Default On/Off

Calibration Code （ Password ： 088 ）

PAN,

TILT,

Color Wheel, Gobo Wheel

1, Gobo Wheel 2, Focus

Temperature XXX ℃ / ℉

Manual Control Lamp On/Off

Channel

PAN=XXX ……

Signal Set Wire DMX

Wireless DMX

Act WDMX & Out

Edit Program Program1

…

Program8

Steps(1..48)

Scenes 01

…

Scenes XX

Pan=XXX …

…

Time=xx.xS

Mode of channel Mode Set 16Bit Mode

8Bit Mode

Design Mode

Design

Mode Set

Max Ch annel = XX

PAN = 001

…

Information Lamp Hours XXXX(Hours)

Clear Lamp

Time

On/Off

Software

Version

V1.0~V9.9

7. Photometric

Photometric

Photometric Data

Data

8.DMX

8.DMX Channels

Channels

Mode/Channel

Mode/Channel Function

Function

Function Values

Values

Values Description

Description

16B 8B DE

1 1 9 Pan 0-255 PA N Movement

2 Pan Fine 0-255 Fine control of Pan movement

3 2 10 Tilt 0-255 Tilt Movement

4 Tilt Fine 0-255 Fine control of T ilt movement

5 3 3 Color

0-008 Open/White

009-017 Color 1

018-026 Color 2

027-035 Color 3

036-044 Color 4

045-052 Color 5

053-061 Color 6

062-070 Color 7

071-079 Color 8

080-088 Color 9

089-096 Color 10

097-105 Color 11

106-114 Color 12

115-127 Color 13

128-189 Forwards rainbow effect from fast to slow

190-193 Color ro tation stop

194-255 Backwards rainbow e ffect from slow to fast

0-007 Open

008-015 Gobo 1

016-023 Gobo 2

024-031 Gobo 3

032-039 Gobo 4

040-047 Gobo 5

Color imagination SI-056 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual