
LED RGBW
(PLUG & PLAY)
Wiring instructions / Instructions de câblage / Installationsanleitung
FROM POWER REPEATER OUTPUT/
CÂBLE RELIÉ À LA SORTIE DU RÉPÉTEUR DE PUISSANCE/
ABGANG VOM POWER REPEATER
INPUT CABLE/
CÂBLE D’ENTRÉE/
ZULEITUNG
LED RGBW UNIT/
LUMINAIRE LED RGBW/
LED-RGBW-LEUCHTE
NB:
LED RGBW units are designed for colour change. They
should not be left for long periods with all four colours (red,
green, blue and white) on full power. This could eventually
lead to reduced light output.
NB:
Les luminaires LED RGBW sont conçus pour le
changement de couleur. Ils ne doivent pas être allumés
pour de longues périodes avec les 4 couleurs (rouge,
vert, bleu et blanc) en pleine puissance. Cela pourrait
éventuellement réduire l’intensité lumineuse du produit.
LED RGBW UNIT/
LUMINAIRE LED RGBW/
LED-RGBW-LEUCHTE
OUTPUT CABLE/
CÂBLE DE SORTIE/
ABGANGSKABEL
INPUT CABLE/
CÂBLE D’ENTRÉE/
ZULEITUNG
OUTPUT CABLE/
CÂBLE DE SORTIE/
ABGANGSKABEL
Connect output cable to input cable for
any remaining units/
Connectez le câble d’entrée au câble de
sortie pour tous les produits suivants/
Verbinden Sie die Abgangskabel mit
den Zuleitungen für alle verbleibenden
Leuchten
HINWEIS:
LED-RGBW-Leuchten sind für den Farbwechsel konzipiert.
Sie sollten nicht über einen längeren Zeitraum bei voller
Leistung mit allen vier Farben (Rot, Grün, Blau, Weiß)
betrieben werden.
t +44 (0) 1604 495 151 f +44 (0) 1604 495 095
EN
e sales@collingwoodgroup.com w collingwoodlighting.com
t +33 (0) 4 816 816 10 f +33 (0) 4 816 816 11
FR
e ventes@collingwoodgroup.com w collingwoodlighting.com
t +49 (0)89 411123 777 f +49 (0)89 411123 778
DE
e verkauf@collingwoodgroup.com w collingwoodlighting.com
On the last output cable, plug in the
terminator to complete the circuit/
Fermez le circuit en connectant le shunt sur
le dernier câble de sortie/
Schließen Sie den Stromkreis, indem Sie
beim letzten Abgangskabel die fünf Drähte
kurzschließen
CWW 6076 V1