Cole-Parmer TT-2102.C, TT-10102.C, TT-363.C, TT-363, TT-2102 Cole-Parmer Symmetry TA & TT Balance Series Start-up Guide
...
Start up Guide
TA and TT
Balance Series
1. CONTENT
Models: TA-225.C | TA-64
Balance
x 1
Models: TA-164.C | TA-224.C | TA-314.C | TA-164 | TA-224 | TA-314
Balance
x 1
Models: TT-363.C | TT-603.C | TT-1003.C | TT-363 | TT-603 | TT-1003
Balance
x 1
Weighing pan
x 1
Weighing pan
x 1
Weighing pan
x 1
Draft shield
x 1
Draft shield
x 1
Draft shield
x 1
Centring ring
x 1
Bottom insert
x 1
Grounding foot
x 1
Bottom insert
x 1
Power adapter
x 1
Foot
x 3
Power adapter
x 1
Power adapter
x 1
Models: TT-2102.C | TT-4502.C | TT-2102 | TT-4502 | TT-6001 | TT-10001
Balance
x 1
Models: TT-6002.C | TT-6002
Balance
x 1
Models: TT-10102.C
Weighing pan
x 1
Weighing pan
x 1
Grounding foot
x 1
Draft shield
x 1
Foot
x 3
Grounding foot
x 1
Power adapter
x 1
Foot
x 1
Power adapter
x 1
Balance
1
×
Weighing pan ×1
Draft shield
1
1
×
Power adapter
x 1
2. WORKROOM AND BASIC OPERATION GUIDELINES
o
C
+40
+104oF
o
+10
C
o
F
+50
Place the balance away from heat
sources. Avoid exposing the balance
to the sunlight.
Operate the device in a room where the temperature ranges between 10–40 °C
(50–104 °F) and where the relative humidity is below 80%.
Place the balance on a solid surface to ensure stability. To obtain stable and
repeatable weighing results, an anti-vibration table is recommended.
Avoid exposing the balance to a
magnetic field. Do not weigh
magnetic substances.
Do not place the balance in a hazardous
area. Do not weigh explosive materials.
Avoid air drafts and air movements
at the workstation.
Make sure that the balance is placed
on an even surface.
Do not place the balance on an unstable
ground exposed to shocks and vibrations.
3. UNPACKING
1 2 3
TOP
Keep the packaging should a warranty
claim or service be required.
4. ACTIVITIES TO BE DONE PRIOR TO OPERATION
4.1. Remove transport lock
Models: TA-225.C | TA-164.C | TA-224.C | TA-314.C | TA-64 | TA-164 | TA-224 | TA-314
1
Models: TT-363.C | TT-603.C | TT-1003.C | TT-2102.C | TT-4502.C | TT-6002.C | TT-363 | TT-603 | TT-1003 |
TT-2102 | TT-4502 | TT-6001 | TT-10001
2
Keep the transport
lock should a
warranty claim or
service be required.
1 2
Keep the transport
lock should a
warranty claim or
service be required.
4.2. Grounding spring check
Models: TA-225.C | TA-164.C | TA-224.C | TA-314.C | TA-64 | TA-164 | TA-224 | TA-314
Check the grounding spring.
Make sure that the grounding
spring juts slightly out of the
hole.
Models: TT-363.C | TT-603.C | TT-1003.C | TT-2102.C | TT-4502.C | TT-6002.C | TT-363 | TT-603 |
TT-1003 | TT-2102 | TT-4502 | TT-6001 | TT-10001
Check the grounding spring.
Make sure that the grounding
spring juts slightly out of the
hole.
Grounding foot
5. COMPONENTS ASSEMBLY
Models: TA-225.C | TA-64
1
Models: TA-164.C | TA-224.C | TA-314.C | TA-164 | TA-224 | TA-314
2
3
1 2 3
Models: TT-363.C | TT-603.C | TT-1003.C | TT-363 | TT-603 | TT-1003
4
1 2 3
Install the
grounding foot
in a freely
selected
opening.
Models: TT-2102.C | TT-4502.C | TT-2102 | TT-4502 | TT-6001 | TT-10001
1 2
Models: TT-6002.C | TT-6002
1 2 3
Install the
grounding foot
in a freely
selected
opening.
Install the
grounding foot
in a freely
selected
opening.
Models: TT-10102.C
1
2
Loading...