Cole-Parmer 03405-40, 03405-45, 03407-40, 03407-45 Instruction Manual
StableTemp
®
Digital Hotplates,
Stirrers and
Stirring Hotplates
OPERATION MANUAL
AND PARTS LIST
Hotplates:
Catalog # Size Voltage Top Plate Material
03405-40 7x7 120 Ceramic
03405-45 7x7 230 Ceramic
Stirring Hotplates:
Catalog # Size Voltage Top Plate Material
03407-40 7x7 120 Ceramic
03407-45 7x7 230 Ceramic
LT1912X1 • 3/26/07
Safety Information ..............................................................................................................................................3
Alert Boxes ..................................................................................................................................................3
Warnings ......................................................................................................................................................3
General Specifications ........................................................................................................................................5
Heating Specifications ..................................................................................................................................5
Stirring Speed Specifications........................................................................................................................5
Overall Dimensions ......................................................................................................................................5
Top Plate Dimensions ..................................................................................................................................5
Weight ..........................................................................................................................................................5
Environmental Conditions ............................................................................................................................6
Declaration of Conformity ............................................................................................................................6
Unpacking and Installation ..................................................................................................................................7
General Usage..............................................................................................................................................7
Unpacking ....................................................................................................................................................7
Installation ....................................................................................................................................................7
Operation ..........................................................................................................................................................8
Powering the Unit ........................................................................................................................................8
Setting the Stirring Speed ............................................................................................................................8
Setting the Temperature ..............................................................................................................................8
Controlling Solution Temperature with an External Probe............................................................................9
Over Temperature Protection Setpoint ........................................................................................................9
Heating Metal Vessels and Sand Baths ......................................................................................................9
Setting the Timer ..........................................................................................................................................9
Service and Calibration ....................................................................................................................................10
Service Menu..............................................................................................................................................10
Oil Bath Method of Calibration....................................................................................................................11
System Method of Calibration ....................................................................................................................12
Timer Shutdown - End ................................................................................................................................13
Probe Temperature Limit - PL ....................................................................................................................14
Probe Response - Pr ..................................................................................................................................15
Error Disable - Err ......................................................................................................................................16
Factory Defaults - deF ................................................................................................................................17
General Cleaning Instructions ....................................................................................................................17
Troubleshooting ................................................................................................................................................18
Error Codes ................................................................................................................................................18
Replacement Parts List ....................................................................................................................................20
Warranty ........................................................................................................................................................21
2
Table of Contents
Your Cole-Parmer StableTemp Hotplate, Stirrer or Stirring
Hotplate has been designed with function, reliability, and
safety in mind. It is your responsibility to install it in conformance with local electrical codes. For safe operation,
please pay attention to the alert signals throughout the
manual.
This manual contains important operating and safety
information. The user must carefully read and understand
the contents of this manual prior to the use of this equipment.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current handling capacity.
2. Disconnect from the power supply prior to maintenance and servicing.
To avoid personal injury:
1. Do not use in the presence of flammable or
combustible materials — fire or explosion may
result. This device contains components which
may ignite such materials. Not rated for use in
hazardous atmospheres.
2. Use caution when heating volatile materials; top
surface and element can reach the “Flash Point
Te mperature” of many chemicals. These stirring
hotplates are not explosion proof. Fire or explosion may result. Unit contains components
which may ignite such materials.
3. Keep top surface clean. Use a non-abrasive
cleaner. Alkali spills, hydrofluoric acid spills or
phosphoric acid spills may damage top and lead
to thermal failure. Unplug unit and remove spills
promptly. Do not immerse unit for cleaning.
4. Replace the top immediately if damaged by
etching, scratching or chipping. A damaged top
can break in use.
3
Safety Information
Warning
Warnings alert you to a possibility of personal injury.
Caution
Cautions alert you to a possibility of
damage to the equipment.
Hot Surface
Hot surfaces alert you to a possibility of
personal injury if you come in contact
with a surface during use or for a period
of time after use.
Alert Signals
Warning
Refer servicing to qualified personnel.
5. Do not use metal foil on hotplate which may
block air flow. Overheating will result.
6. Do not remove or modify grounded power plug.
Use only properly grounded outlets to avoid
shock hazard.
7. Use appropriate hand and eye protection when
handling hazardous chemicals.
8. Gross weight of items placed on top of stirrers
should not exceed 25 lbs. (11.3 kg).
9. The top plate of the unit can remain hot for
some time after use. A “CAUTION - HOT TOP”
light will remain on until top plate temperature
cools to below 50°C.
10. Do not leave an active probe out of the fluid.
This may cause uncontrolled heating of the fluid
on the hotplate and unintentional boiling or an
explosion could occur.
11. Note that the exterior housing will be hot during
and for a period of time after use.
12. Refer servicing to qualified personnel.
4
SAFETY INFORMATION
5
General Specifications
Heating Specifications
Accuracy of the temperature display vs. the actual average temperature ± 10.0°C
of a 2” diameter of setting area at the center of the top plate (setpoint 100°C unloaded).
Stirring Speed Specifications
Accuracy of the stirring setpoint (600 ml of water in a 100 ml glass flask above 200 rpm): ± 2.0%
Overall Dimensions - W x H x D
All Models: 8.2 x 8.2 x 8.2” (20.8 x 20.8 x 20.8 cm)
Top Plate Dimensions - W x H x D
All Models: 7.25 x 7.25 x 7.25” (18.4 x 18.4 x 18.4 cm)
Weight
All Models: 11 lbs. (5.0 kg)
* These digital plates do not cool. The minimum temperature is 1°C if used in a cold room below 1°C.
Electrical Temperature Speed Top Plate
Catalog # (Volts/Amps/Watts/Freq./Phase) Range Range Capacity
Hotplates:
03405-40 120/8.8/1060/60/1 1-540°C N/A 4L flask - 25 lbs.
03405-45 220-240/4.8/1150/50-60/1 1-540°C N/A 4L flask - 25 lbs.
Stirring Hotplates:
03407-40 120/8.9/1070/60/1 1-540°C 60-1200 4L flask - 25 lbs.
03407-45 220-240/4.9/1170/50-60/1 1-540°C 60-1200 4L flask - 25 lbs.
6
Environmental Conditions
Operating: 17°C to 27°C; 20% to 80% relative humidity, non-condensing. Installation category II
(overvoltage) in accordance with IEC 664. Pollution degree 2 in accordance with IEC 664.
Altitude Limit: 2,000 meters.
Storage: -25°C to 65°C
10% to 85% relative humidity
Declaration of Conformity
(for 230 volt)
We hereby declare under our sole responsibility that this product conforms with the technical requirements of
the following standards:
EMC: EN 61000-3-2 Limits for harmonic current emissions
EN 61000-3-3 Limits for voltage fluctuations and flicker
EN 61326-1 Electrical equipment for measurement, control, and laboratory use;
Part l: General Requirements
Safety: EN 61010-1 Safety requirements for electrical equipment for measurement,
control, and laboratory use; Part I: General Requirements
EN 61010-2-010 Part II: Particular requirements for laboratory equipment for the
heating of materials (Hotplates and Stirring Hotplates)
EN 61010-2-051 Part II: Particular requirements for laboratory equipment for mixing
and stirring (Stirrers and Stirring Hotplates)
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Thermo Fisher Scientific
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
GENERAL SPECIFICATIONS
7
General Usage
Do not use this product for anything other than its intended usage.
Unpacking
Remove your hotplate, stirrer or stirring hotplate from the
carton. Inspect to ensure that the unit has not been damaged during shipment. If the unit appears to have sustained shipping damage contact Cole-Parmer Customer
Service at 800-323-4340.
The following items are included in the shipment:
Hotplate, Stirrer or Stirring Hotplate
Stir Bar (Stirring models only)
Temperature Probe (Heating models only)
Knob
Operator’s Manual
Rod (Heating models only)
Clamps (Heating models only)
If any of these items are missing from the carton, contact
Cole-Parmer Instrument Company.
Installation
Set the unit on a flat stable surface at least 12" away from
combustible materials, and plug the cordset into a properly grounded electrical outlet of correct voltage and current
handling capacity.
Run the stirrer at maximum speed for 10 minutes prior to
using the product.
Unpacking and Installation
Warning
Use a properly grounded electrical
outlet of correct voltage and current
handling capacity.
Do not remove or modify grounded
power plug. Use only properly grounded outlets to avoid shock hazard. Not
rated for use in hazardous atmospheres.
Loading...