Page 1
OPERATING INSTRUCTIONS
OAKTON 03316-70, -72, and -80
Wall-Mount
Barometers
Printed in the U.S.A. 4/00
Page 2
32
Table of Contents
1. Introduction..............................................................................3
2. Installation
............................................................................4-5
3. Operation
...............................................................................6-9
3.1 Setting the reference needle..............................................................6
3.2 Sea level correction ...............................................................................7
3.3 Temperature readings...........................................................................8
3.4 °F/°C scale selection (03316-80 only) ...............................................9
4. Precautions .............................................................................10
5. Specifications
.................................................................11-13
6. Accessories
..............................................................................14
7. Warranty
..................................................................................15
8. Return of Goods
..................................................................15
1. Introduction
Thank you for purchasing an OAKTON Barometer. You have one
of three models. All models are ideal for monitoring impending
weather changes and temperature. They are intended for indoor
use only.
Aneroid barometers 03316-70 and -72 feature a built-in bimetallic
element (which provides temperature compensation for the
aneroid capsule) and a glass thermometer.
Barometer 03316-80 features a °F/°C selectable digital display.
Aneroid barometer with inches Hg scale
(model number 03316-70)
Aneroid barometer with mm Hg scale
(model number 03316-72)
Barometer with digital thermometer
(model number 03316-80)
Page 3
54
2. Installation
Models 03316-70, -72
To wall mount your instrument, place a nail or screw through
each of the three mounting holes along the outside of the
instrument.
2.1
Hook for
installing instrument
Bracket
Hole for wall
mounting or
mounting bracket
Hole for wall
mounting or
mounting bracket
Hook for
installing instrument
Model 03316-80, cont.
Mounting with the bracket:
Model 03316-80 includes a wall mounting
bracket for more permanent mounting.
1. Mount the bracket on a wall with the
screws (see diagram below).
2. Slide the holes on the back of the instrument over the
bracket hooks (see diagram below).
5
/
8"
7
/
16"
15
/
32"
Model 03316-80
Mounting without the bracket:
Simply hang up the barometer from the hole on the top back of
your instrument.
2.2
2.2
Instrument
measures 73⁄8"dia
Mounting holes
are 1⁄8" dia,
1
⁄8" away from
product edges
PULL OPEN
Page 4
6 7
3. Operation
Barometric pressure readings require no external power.
Note: “High pressure” and “low pressure” are relative terms.
There is no distinct point on the scale that clearly defines where
low pressure and high pressure begins, and vice versa.
Setting the reference needle
Your barometer features a reference needle (gold) and an
indicator needle.
• The reference needle shows where the barometric pressure
started.
• The indicator needle shows the current barometric pressure.
Sea level corrections
Since air pressure changes with altitude, you must compensate
your barometer accordingly. The higher you are above sea level,
the lower (to the left) the indicator needle will move on the
barometer.
Example: At at an altitude of 100 meters (330 feet), the barometer
will drop about 12 millibar (mb). To compensate for that altitude,
simply add back the 12 mb. Therefore, a reading of 1000 mb at
sea level becomes 1012 mb at 100 meters altitude (see the sea
level conversion chart below).
To adjust the barometer to your altitude, turn the adjusting
screw on the back center of the instrument to adjust the indicator
needle.
We recommend that you adjust your barometer after unpacking,
and again about once a year.
3.2
3.1
Reference needle (gold)
Indicator needle
Adjusting knob
Lower pressure
Higher pressure
Use the adjusting knob on
the front center of the unit
to align the gold reference
needle on top of the indicator needle. After several
hours, the indicator needle
will move upward move
downward, or remain still.
• Upward movement
means improved
weather
• Downward movement
means deteriorating
weather (rain or snow).
• No movement means no
weather change
sea level conversion chart
m =
600
70
60
40
50
30
100200300400500
20 10
0
meters above
sea level
mb =
sea level
correction
0
Page 5
8 9
Temperature readings
Models 03316-70, -72
These models feature a glass thermometer;
no external power or temperature
adjustments are required.
Model 03316-70 has both °F and °C scales.
Model 03316-72 has a °C scale only.
Note that these models feature a bimetallic
element for temperature compensated barometric pressure
readings.
Model 03316-80
Although the barometric pressure scale
requires no batteries or external power
to operate, this model requires one
1.5 V AA battery to operate the
digital thermometer. Battery life is
approximately one year.
To change the battery, open the lid on the back of the
barometer and insert the AAbattery (see diagram on page 9).
The positive (+) and negative (–) poles are shown at
the bottom of the battery compartment.
3.3
°F/°C scale selection
(
Model 03316-80 only
)
This instrument is factory set to read
temperature in °C. To change to °F,
locate the switch under the vents on
the back panel (fourth opening from the
left). Move the switch to the left with a
screwdriver. To return to °C, set the
screwdriver into the third opening from
the left and move the switch to the right.
See diagram below.
C/ F
slide switch
PULL OPEN
battery compartment
3.4
Page 6
10 11
4. Precautions
1. Handle with care. Your instrument uses a precise mechanism
to expand and contract the pressure chamber. Rough treatment can damage the mechanism.
2. Avoid direct contact with water and high levels of
condensation. This instrument is not waterproof, and its
vents are intended only for air circulation.
3. Because the thermometer is also made with precision parts,
the instrument must not be stored in extreme temperatures.
Avoid rapid temperature changes and strong physical shocks.
The instrument must not be placed near heating units or in
direct sunlight.
4. For accurate barometric pressure readings, keep the
instrument in a vertical position.
5. Dismantling the instrument can affect its accuracy.
6. Remove stains with a soft cloth and mild detergent.
7. Never use in environments that contain solvents like acetone,
benzene, alcohol, or acids and bases.
Model number 03316-70
Barometric pressure
Range 930 to 1070 mbar / 27.5" to 31.6 "Hg
Resolution 1 mbar / 0.1 "Hg
Accuracy ±1 mbar / ±0.03 "Hg
Temperature
Range –5 to 55°C / –22 to 132°F
Resolution 1°C / 2°F
Accuracy ±1°C / ±1.8°F
Sensor kerosene filled glass thermometer
Altitude use between sea level and 2000 feet
Power none required
Case brass
Dimensions 71⁄8" dia x 21⁄8" D
Shpg wt. 3 lbs
Specifications, cont.
Page 7
12 13
Specifications, cont.
Model number 03316-72
Barometric pressure
Range 930 to 1070 mbar / 698 to 802 mm Hg
Resolution 1 mbar / 0.1 "Hg
Accuracy ±1 mbar / ±0.03 "Hg
Temperature
Range –5 to 55°C
Resolution 1°C
Accuracy ±1°C
Sensor kerosene filled glass thermometer
Altitude use between sea level and 2000 feet
Power none required
Case brass
Dimensions 71⁄8" dia x 21⁄8" D
Shpg wt. 3 lbs
Specifications, cont.
Model number 03316-80
Barometric pressure
Range 945 to 1045 mbar / 27.9" to 30.9 "Hg
Resolution 0.5 mbar / 0.1 "Hg
Accuracy ±1 mbar between 970 to 1030 mbar;
±2 mbar beyond this range
Temperature
Range –20 to 60°C / –4 to 140°F
Resolution 0.1°C or °F
Accuracy ±1°C / ±1.8°F
Sensor thermistor (display is digital LCD)
Power One 1.5 V AA battery (included)
battery life approx. one year
Case ABS plastic
Dimensions
Body 51⁄4" dia x 11⁄4"D
Flange 63⁄8" OD x 1⁄8" D
Shpg wt. 2 lbs
Page 8
14 15
6. Additional models
WD-03316-70 Aneroid barometer with inches Hg scale
WD-03316-72 Aneroid barometer with mm Hg scale
WD-03316-80 Barometer with digital thermometer
To order additional barometers, contact your
OAKTON distributor.
7. Warranty
Oakton Instruments warrants this product to be free from
significant deviations in material and workmanship for a period
of six months from the date of purchase. If repair is necessary
and has not been the result of abuse or misuse within the
warranty period, please return by freight pre-paid and amendment will be made without charge. The Customer Service
Department will determine if the product problem is due to
deviations or customer abuse. Out of warranty products will be
repaired on a charge basis.
8. Return of Goods
Authorization must be obtained from our Customer Service
Department before returning items for any reason. When
applying for authorization, please include data regarding the
reason the items are to be returned. For your protection, items
must be carefully packed to prevent damage in shipment
and insured against possible damage or loss. We will not be
responsible for damage resulting from careless or insufficient
packing. A restocking charge will be made on all unauthorized
returns. NOTE: We reserve the right to make improvements in
design, construction, and appearance of products without notice.
Loading...