Coleman TH4B1821S, TH4B3521S, TH4B4221H, TH4B4821S, TH4B6021S Technical Manual
...
®
5005749-CTG-A-0216
DESCRIPTION
The TH4 models are the newest offering in our successful LX
Series split system heat pump lineup. These outdoor units are
optimized for the new 14 SEER / 8.2 HSPF Minimum Efficiency
in all US Regions, and are specifically designed to be matched
with Coleman indoor coils, furnaces, and air handlers to provide
a complete system solution.
TECHNICAL GUIDE
LX
SERIES
FOR INSTALLATION IN ALL US REGIONS AND CANADA
SPLIT SYSTEM
HEAT PUMPS
Installation Allowed
14 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: TH4B18 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-year limited parts warranty.
Standard 10-year limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FEATURES
• Easier Installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
power and control wiring access. Options are provided for
indoor piston or TXV. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing
and charging the system. The small base dimension and
reduced unit size make for easier retrofits.
• Accessible Information - QR code on unit provides quick
access to technical documents and warranty information.
• Durable Finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust
creep. Titanium colored powdercoat paint further protects
external panels.
• Rugged Coil Protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design.
• Quality Coils - Enhanced aluminum fins are mechanically
bonded to copper tubing.
• Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high and low pressure
switches. The liquid line filter-drier is factory installed to protect the compressor against moisture and debris.
• Reliable Operation - Ball bearing fan motors provide superior performance in extreme temperatures. Factory installed
accumulator ensures proper functioning across a wide range
of conditions.
• Environmentally Friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.
• Top Discharge - Air is blown up, away from the structure
and any landscaping and allows compact location on multiunit applications.
• Low Operating Sound Levels - Developed using CFD and
FEA tools, the sturdy cabinet and top design provides sound
performance of 75 dBA or lower. Compatible accessories for
further sound reduction are also available.
• Better Service Access - Diagonal base valves with open
access for low-loss fittings, single panel access to the electrical controls, full corner access, and removable fan guard
allow easy access for unit maintenance.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
5005749-CTG-A-0216
LIST OF SECTIONS
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
NOMENCLATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
PHYSICAL AND ELECTRICAL DATA . . . . . . . . . . . . . . . . . . . . . . . 3
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS . . . . . . .4
SYSTEM CAPACITY - Single Piece and Modular Air Handlers . . 5
SYSTEM CAPACITY - Upflow, Downflow & Horizontal
Furnaces and Coils (Coil Only Ratings) . . . . . . . . . . . . . . . . . . . . . 8
SYSTEM CAPACITY - With High Efficiency Motor Furnaces . . . . 9
APPLICATION & ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . 30
SOUND POWER RATINGS - COOLING . . . . . . . . . . . . . . . . . . . . . 30
SOUND POWER RATINGS - HEATING . . . . . . . . . . . . . . . . . . . . . 31
MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 31
TYPICAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TYPICAL FIELD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
ALTERNATIVE INSTALLATION CLEARANCES . . . . . . . . . . . . . .33
PERFORMANCE DATA - 1.5 TON . . . . . . . . . . . . . . . . . . . . . . . . .34
PERFORMANCE DATA - 2 TON . . . . . . . . . . . . . . . . . . . . . . . . . .38
PERFORMANCE DATA - 2.5 TON . . . . . . . . . . . . . . . . . . . . . . . . .43
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . .49
PERFORMANCE DATA - 3 TON . . . . . . . . . . . . . . . . . . . . . . . . . .54
PERFORMANCE DATA - 3.5 TON . . . . . . . . . . . . . . . . . . . . . . . . .58
PERFORMANCE DATA - 4 TON . . . . . . . . . . . . . . . . . . . . . . . . . .64
PERFORMANCE DATA - 5 TON . . . . . . . . . . . . . . . . . . . . . . . . . .68
NOMENCLATURE
BRAND
PRODUCT TYPE
NOMINAL
SERIES EFFICIENCY
AND STAGING
REFRIGERANT
NOMINAL
UNIT CAPACITY
(MBH)
VOLTAGE
(Voltage-Phase-Hertz)
GENERATION
(MAJOR REVISION)
FACTORY OPTION
STYLE LETTER
(Minor Revision)
Not Used for Ordering
T
T = Factory Branded
C = Air Conditioner (US Northern or
Southeast Region)
H = Heat Pump
H
F = Fin & Tube Air Conditioner
W = High EER US Southwest Region
Air Conditioner
3 = 13 SEER / 1-Stage (US Northern
Region)
4
4 = 14 SEER / 1-Stage (US Southeast
or Southwest Region)
B
B = R-410A
18 = 1.5 Ton 36 = 3 Ton
24 = 2 Ton 42 = 3.5 Ton
36
30 = 2.5 Ton 48 = 4 Ton
35 = 3 Ton 60 = 5 Ton
2
2 = 208/230-1-60
1 = 1st Gen
1
2 = 2nd Gen
etc
S = Standard (No Options)
S
H = Hard Start Kit
A = Style A
A
B = Style B
2 Johnson Controls Unitary Products
5005749-CTG-A-0216
PHYSICAL AND ELECTRICAL DATA
MODEL TH4B1821S TH4B2421S TH4B3021S TH4B3521S TH4B3621H TH4B4221H TH4B4821S TH4B6021S
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range
1
Minimum Circuit Ampacity 12.0 15.4 18.1 20.5 19.7 25.5 30.8 31.7
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps
2
3
20 25 30 35 30 40 50 50
15 20 20 25 20 30 35 35
Compressor Type Scroll Scroll Scroll Scroll Recip Recip Scroll Scroll
Compressor
Amps
Rated Load 9.0 11.7 13.4 15.4 14.7 19.4 23.6 24.3
Locked Rotor 56.3 61.6 72.5 83.9 78.0 88.0 130.0 144.2
Crankcase Heater No No No No Yes Yes No No
Factory External Discharge Muffler Yes Yes Yes Yes Yes Yes Yes Yes
HS Kit Required with TXV
4
No No No No Yes* Yes* No No
Fan Diameter Inches 22 22 24 24 24 24 26 26
Rated HP 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4
Fan Motor
Rated Load Amps 0.80 0.80 1.30 1.30 1.30 1.30 1.30 1.30
Nominal RPM 1075 1075 850 850 850 850 850 850
Nominal CFM 2850 2850 2995 2995 3715 3715 4000 4100
Face Area Sq. Ft. 14.35 17.94 23.82 23.82 46.92 46.92 52.08 56.82
Coil
Rows Deep 11112222
Fins / Inch 22 22 22 22 18 18 18 18
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8
5
Vapor Line Set OD (Field Installed)
Unit Charge (Lbs. - Oz.)
6
3/4 3/4 3/4 3/4 3/4 7/8 7/8
5 - 11 6 - 7 7 - 15 8 - 1 12 - 4 12 - 7 15 - 4 14 - 10
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.62 0.67 0.67 0.75
Operating Weight Lbs. 120 131 176 176 230 230 235 256
* Models with "H" on the end of the model number are shipped with a Hard Start Kit installed at the factory.
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. For applications with non-standard vapor line sizes, see the “Applications & Accessories” section of this Technical Guide.
6. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in actual lineset length (not the equivalent length) multiplied by the per foot value.
187 to 252
1-1/8
‡
Unit
C
Model
TH4B1821S
TH4B2421S
TH4B3021S
TH4B3521S
A
TH4B3621H
TH4B4221H
TH4B4821S
Dimensions
(Inches)
A B C Liquid Vapor
33-1/4 29-1/4 29-1/4
36-1/4 29-1/4 29-1/4
39-1/2 35-1/4 31-3/4
39-1/2 35-1/4 31-3/4
39-1/2 35-1/4 31-3/4
39-1/2 35-1/4 31-3/4
39-1/2 38 31-3/4
TH4B6021S 42-3/4 38 34-1/4
‡ Adapter fitting must be field installed for the required 1-1/8” line set.
B
A0339-001
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
Refrigerant Connection
Service Valve Size
3/4
3/8
7/8
‡
7/8
Johnson Controls Unitary Products 3
5005749-CTG-A-0216
SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS
Outdoor Unit TH4B1821S TH4B2421S TH4B3021S TH4B3521S TH4B3621H TH4B4221H TH4B4821S TH4B6021S
Required TXV
1,2
Defrost Jumper Pin Setting 22233242
Indoor Unit
3,4,5
AP18B 0 – – –––––
AP24B 7 0 – –––––
AP30B – – 0 –––––
AP36B – – 0 –––––
AP36C – – 3 –––––
AP37C – – – –8–––
AP42C – – – –––––
AP48(C,D) – – – –––––
AP60(C,D) – – – –––––
AE18B 0 – – –––––
AE24B 7 0 – –––––
AE30B – 9 – –––––
AE36(B,C) – – 0 –––––
AE42C – – – 780––
AE48(C,D) – – – –800–
AE60C – – – ––18–
AE60D – – – ––––2
AVC18B 0 – – –––––
AVC24B 7 0 – –––––
AVC30B – 9 0 –––––
AVC36(B,C) – – 0 0––––
AVC42C – – – 780––
AVC48(C,D) – – – –800–
AVC60C – – – ––18–
AVC60D – – – ––––2
CF/CM/CU18(A,B) 0 – – –––––
CF/CM/CU24(A,B) 7 0 – –––––
CF/CM/CU30(A,B,C) – 9 – –––––
CF/CM/CU36(A,B,C) – – 0 0––––
CF/CM/CU42(B,C,D) – – 3 8––––
CF/CM/CU48(C,D) – – – 7800–
CF/CM/CU60(C,D) – – – ––18–
CF/CM64D – – – ––––2
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV, use S1-1TVM*** series kit.
2. A TXV kit must be used with these indoor units to obtain system performance.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. CF coils cannot be used in horizontal applications.
5. Charge adders shown above do not indicate that coils are rated for every application. Refer to Performance Data Tables for actual performance for specified
system matches. Obtain certified system ratings from
CHARGING PROCEDURES:
1. Check the Factory Unit Charge listed on the unit nameplate to verify the refrigerant charge for the outdoor unit, the smallest matched indoor unit, and the 15 feet of
interconnecting lineset.
2. Verify the indoor metering device and additional charge required for the specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting lineset greater than 15 feet at the rate specified in the Physical and Electrical Table.
4. For installations requiring additional charge, weigh in refrigerant for the specific matching indoor unit and actual lineset length.
5. Once the charge adders for matched indoor unit and for lineset have been weighed in, verify the system operation against the temperatures and pressures in the
Charging Chart for the outdoor unit. Locate Charging Charts on the outdoor unit and also in the Service Data Application Guide on
Subcool or the Superheat charging procedure in the Installation Manual according to the type of indoor metering device in the system, and allow ten minutes after
each charge adjustment for the system operation to stabilize. Record the charge adjustment made to match the Charging Chart.
6. Permanently stamp the unit data plate with the TOTAL SYSTEM CHARGE defined as follows: TOTAL SYSTEM CHARGE = Base Charge (as shipped) + charge
adder for matched indoor unit + charge adder for actual lineset length + charge adjustments to match the Charging Chart.
BA1 BA1 BB1 or BE1 BE1 BF1 BF1 BC1 BG1
Additional Charge, oz
www.ahridirectory.org.
www.upgnet.com. Follow the
4 Johnson Controls Unitary Products
5005749-CTG-A-0216
Johnson Controls Unitary Products 5
SYSTEM CAPACITY - Single Piece and Modular Air Handlers
UNIT
MODEL
AIR HANDLER
COIL
MODEL
3
RATED
CFM
COOLING
1
HEATING
2
TVA COOLING
MODEL WIDTH
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
TH4B1821S AE18BX21 17.5 – 600 18.0 12.8 15.25 12.75 17.6 11.7 8.75 3.78 2.56 16.2 14.3
TH4B1821S AE24BX21 17.5 – 600 18.0 12.9 15.25 12.75 17.5 11.7 9.00 3.82 2.58 16.2 14.4
TH4B1821S AP18BX21 17.5 – 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B1821S AVC18BX21 17.5 – 600 18.0 12.8 15.25 12.75 17.3 11.7 8.75 3.78 2.54 16.2 14.3
TH4B1821S AVC24BX21 17.5 – 600 18.0 12.9 15.25 12.75 17.5 11.7 9.00 3.82 2.58 16.2 14.4
TH4B1821S ME08BN21 17.5 CF/CM18B 600 18.0 12.8 15.00 12.75 17.3 11.7 9.00 3.80 2.56 16.2 14.3
TH4B1821S ME08BN21 17.5 CF/CM24B 600 18.0 12.8 15.25 12.75 17.5 11.7 9.00 3.84 2.60 16.2 14.3
TH4B1821S ME12BN21 17.5 CF/CM18B 600 17.8 12.8 14.00 12.00 17.5 12.0 8.25 3.56 2.40 16.2 14.4
TH4B1821S ME12BN21 17.5 CF/CM24B 600 17.8 12.6 14.00 12.00 17.5 12.0 8.50 3.60 2.44 16.2 14.2
TH4B2421S AE24BX21 17.5 – 800 24.0 17.3 15.50 12.75 23.4 14.9 8.50 3.72 2.46 21.8 19.5
TH4B2421S AE30BX21 17.5 – 800 24.0 17.6 16.00 13.00 24.0 15.4 8.50 3.96 2.66 21.8 19.9
TH4B2421S AP24BX21 17.5 – 800 23.8 17.1 14.00 11.75 24.0 15.4 8.50 3.50 2.32 21.6 19.3
TH4B2421S AP30BX21 17.5 – 800 24.0 17.3 15.25 12.25 24.0 15.6 8.50 3.80 2.54 21.8 19.6
TH4B2421S AVC24BX21 17.5 – 750 24.0 16.8 15.25 12.75 23.4 15.0 8.50 3.64 2.44 22.0 19.6
TH4B2421S AVC30BX21 17.5 – 775 24.0 17.3 16.00 13.00 23.8 15.3 8.50 3.94 2.66 21.9 19.9
TH4B2421S ME08BN21 17.5 CF/CM24B 800 24.0 17.2 15.50 12.75 23.4 14.9 8.50 3.72 2.46 21.8 19.4
TH4B2421S ME08BN21 17.5 CF/CM30B 800 24.0 17.3 16.00 13.00 23.8 15.3 8.50 3.98 2.68 21.8 19.5
TH4B2421S ME12BN21 17.5 CF/CM24B 800 24.0 17.2 15.50 12.75 23.4 14.9 8.50 3.70 2.44 21.8 19.4
TH4B2421S ME12BN21 17.5 CF/CM30B 800 24.0 17.4 16.00 13.00 24.0 15.4 8.50 3.96 2.66 21.8 19.7
TH4B2421S ME14DN21 24.5 CF/CM30D 800 24.0 17.4 15.75 12.75 24.0 15.5 8.50 3.88 2.60 21.8 19.7
TH4B2421S ME16CN21 21.0 CF/CM24C 875 24.0 17.9 14.25 12.00 24.0 15.3 8.25 3.62 2.36 21.5 19.3
TH4B3021S AE36BX21 17.5 – 1000 29.4 21.8 15.50 13.00 29.0 19.5 9.00 3.96 2.76 26.8 24.0
TH4B3021S AE36CX21 21.0 – 1000 29.4 22.0 15.75 13.00 29.0 19.4 9.00 4.00 2.80 26.8 24.3
TH4B3021S AE42CX21 21.0 – 1000 29.6 22.2 16.00 13.00 28.6 19.4 9.00 4.06 2.84 27.2 24.5
TH4B3021S AP30BX21 17.5 – 1000 28.8 21.2 14.00 12.00 29.6 20.0 8.50 3.74 2.62 26.1 23.2
TH4B3021S AP36BX21 17.5 – 1000 28.8 21.4 14.00 12.00 29.6 20.0 8.50 3.76 2.64 26.3 23.6
TH4B3021S AVC36BX21 17.5 – 975 29.4 21.8 15.50 13.00 29.0 19.4 9.00 3.98 2.78 26.9 24.3
TH4B3021S AVC36CX21 21.0 – 975 29.6 21.8 16.00 13.00 28.8 19.3 9.00 4.04 2.82 27.1 24.3
TH4B3021S AVC42CX21 21.0 – 975 29.2 21.8 15.75 13.00 28.6 19.3 9.00 4.04 2.84 26.7 24.3
TH4B3021S ME12BN21 17.5 CF/CM36B 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S ME12BN21 17.5 CF42B 975 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.3 24.6
TH4B3021S ME14DN21 24.5 CF/CM36D 1000 29.4 22.0 16.00 13.00 29.0 19.3 9.00 4.02 2.80 26.8 24.3
TH4B3021S ME14DN21 24.5 CF/CM42D 1000 29.8 22.2 16.00 13.00 28.4 18.9 9.00 4.04 2.78 27.2 24.3
TH4B3021S ME16CN21 21.0 CF/CM36C 1000 29.2 21.6 14.75 12.25 29.2 19.7 9.00 3.86 2.70 26.7 23.8
TH4B3021S ME16CN21 21.0 CF/CM42C 1000 29.4 21.8 15.00 12.50 28.8 19.2 9.00 3.88 2.68 27.0 24.0
For Notes See Page 7.
5005749-CTG-A-0216
6 Johnson Controls Unitary Products
TH4B3521S AE36BX21 17.5 – 1000 34.4 23.6 14.25 12.00 33.4 21.4 8.50 3.46 2.42 34.2 28.3
TH4B3521S AE36CX21 21.0 – 1230 35.2 26.2 14.50 12.00 34.0 21.6 8.50 3.64 2.48 33.7 28.2
TH4B3521S AE42CX21 21.0 – 1200 35.6 26.8 14.50 12.25 33.8 20.4 8.75 3.74 2.42 34.6 29.3
TH4B3521S AVC36CX21 21.0 – 1125 34.8 25.2 14.25 12.00 33.6 21.6 8.50 3.58 2.46 34.1 28.5
TH4B3521S AVC42CX21 21.0 – 1100 35.4 25.6 14.25 12.25 33.6 18.6 8.75 3.72 2.24 34.8 29.3
TH4B3521S ME12BN21 17.5 CF42B 1150 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.44 34.2 28.8
TH4B3521S ME14DN21 24.5 CF/CM36D 1225 35.2 25.6 14.25 12.25 33.6 21.6 8.50 3.62 2.48 34.1 27.7
TH4B3521S ME14DN21 24.5 CF/CM42D 1200 35.4 26.0 14.75 12.25 33.6 21.2 8.75 3.72 2.50 34.4 28.5
TH4B3521S ME16CN21 21.0 CF/CM36C 1225 35.2 25.6 14.25 12.00 33.6 21.6 8.50 3.60 2.48 34.1 27.7
TH4B3521S ME16CN21 21.0 CF/CM42C 1225 35.8 27.0 14.50 12.50 33.6 21.4 8.75 3.76 2.52 34.5 29.3
TH4B3621H AE42CX21 21.0 – 1175 34.2 24.4 15.25 12.50 33.4 19.5 8.50 3.66 2.62 34.5 27.0
TH4B3621H AE48CX21 21.0 – 1175 34.2 24.4 15.25 12.50 33.4 19.5 8.50 3.66 2.62 34.5 27.0
TH4B3621H AE48DX21 24.5 – 1175 34.4 24.4 15.50 12.75 33.4 19.4 8.50 3.68 2.64 34.7 27.0
TH4B3621H AP37CX21 21.0 – 1170 34.0 24.0 14.00 11.75 34.0 20.0 8.20 3.48 2.48 34.1 26.4
TH4B3621H AVC42CX21 21.0 – 1150 34.4 24.2 15.50 12.75 33.4 19.4 8.50 3.66 2.64 34.8 27.1
TH4B3621H AVC48CX21 21.0 – 1150 34.4 24.2 15.50 12.75 33.4 19.4 8.50 3.66 2.64 34.8 27.1
TH4B3621H AVC48DX21 24.5 – 1150 34.6 24.4 16.00 13.00 33.2 19.3 8.50 3.72 2.68 35.0 27.3
TH4B3621H ME14DN21 24.5 CF/CM48D 1175 34.4 24.4 15.50 12.75 33.4 19.4 8.50 3.70 2.64 34.7 27.0
TH4B3621H ME16CN21 21.0 CF/CM48C 1175 34.4 24.4 15.50 12.75 33.4 19.4 8.50 3.68 2.64 34.7 27.0
TH4B4221H AE42CX21 21.0 – 1275 41.5 28.4 14.00 12.00 40.5 24.0 8.50 3.62 2.68 37.6 29.3
TH4B4221H AE48CX21 21.0 – 1225 42.0 28.0 14.75 12.50 40.0 24.2 8.75 3.64 2.70 37.6 28.7
TH4B4221H AE48DX21 24.5 – 1225 42.0 28.0 15.00 12.75 40.0 24.0 9.00 3.66 2.72 37.6 28.7
TH4B4221H AE60CX21 21.0 – 1275 42.0 27.8 14.25 12.25 41.0 24.6 8.50 3.56 2.62 37.2 28.0
TH4B4221H AVC42CX21 21.0 – 1250 42.0 27.8 14.50 12.25 40.5 24.4 8.50 3.60 2.68 37.4 28.3
TH4B4221H AVC48CX21 21.0 – 1275 42.0 28.4 14.50 12.50 40.5 24.4 8.50 3.64 2.68 37.2 28.7
TH4B4221H AVC48DX21 24.5 – 1300 42.0 28.6 14.75 12.75 40.5 24.2 9.00 3.68 2.72 37.0 28.6
TH4B4221H AVC60CX21 21.0 – 1275 42.0 27.8 15.00 13.00 40.5 24.2 9.00 3.68 2.70 37.2 28.1
TH4B4221H ME14DN21 24.5 CF/CM48D 1175 42.0 27.8 14.75 12.75 40.0 24.0 8.75 3.64 2.72 38.1 29.1
TH4B4221H ME14DN21 24.5 CF/CM60D 1225 42.0 28.0 15.00 13.00 40.0 24.0 9.00 3.70 2.74 37.6 28.7
TH4B4221H ME16CN21 21.0 CF/CM48C 1225 42.0 28.6 15.00 12.75 40.5 24.2 9.00 3.70 2.74 37.6 29.4
TH4B4221H ME16CN21 21.0 CF/CM60C 1225 42.0 28.0 15.00 13.00 40.0 24.2 9.00 3.68 2.72 37.6 28.7
TH4B4221H ME20DN21 24.5 CF/CM48D 1425 42.0 29.8 14.75 12.50 41.0 24.6 8.75 3.72 2.70 35.9 28.4
TH4B4221H ME20DN21 24.5 CF/CM60D 1450 42.0 29.6 15.00 12.75 41.0 24.6 8.75 3.72 2.70 35.7 28.1
TH4B4821S AE48CX21 21.0 – 1,400 46.0 31.8 14.25 12.00 47.5 31.4 9.00 3.58 2.64 41.5 33.4
TH4B4821S AE48DX21 24.5 – 1,400 46.5 32.0 14.50 12.25 47.5 31.4 9.00 3.62 2.66 42.0 33.7
TH4B4821S AE60CX21 21.0 – 1,520 47.0 33.3 15.00 12.50 47.5 31.4 9.00 3.66 2.66 42.4 34.1
For Notes See Page 7.
SYSTEM CAPACITY - Single Piece and Modular Air Handlers
UNIT
MODEL
AIR HANDLER
COIL
MODEL
3
RATED
CFM
COOLING
1
HEATING
2
TVA COOLING
MODEL WIDTH
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 7
— = Not applicable.
* Notates “Hot Heat Pump” performance. These ratings are not AHRI listed.
MP Modular Air Handlers use Coil Only Ratings.
3. CM coils available with a factory installed horizontal drain pan. See price pages for specific model number.
TH4B4821S AVC48CX21 21.0 – 1,375 46.0 31.6 14.25 12.00 47.5 31.4 9.00 3.56 2.62 41.5 31.0
TH4B4821S AVC48DX21 24.5 – 1,400 46.5 31.6 14.75 12.25 47.5 31.2 9.00 3.60 2.66 42.0 33.4
TH4B4821S AVC60CX21 21.0 – 1,350 46.5 31.6 15.00 12.50 47.5 31.2 9.00 3.56 2.62 42.0 30.7
TH4B4821S ME14DN21 24.5 CF/CM48D 1,400 46.5 32.0 14.50 12.25 47.5 31.4 9.00 3.60 2.66 42.0 33.7
TH4B4821S ME14DN21 24.5 CF/CM60D 1,400 46.5 32.0 14.25 12.00 48.0 31.4 9.00 3.54 2.60 42.0 33.7
TH4B4821S ME16CN21 21.0 CF/CM48C 1,400 46.0 31.8 14.50 12.00 47.5 31.4 9.00 3.58 2.64 41.5 33.4
TH4B4821S ME16CN21 21.0 CF/CM60C 1,400 47.0 32.2 14.50 12.25 47.5 31.2 9.00 3.58 2.62 42.4 34.1
TH4B4821S ME20DN21 24.5 CF/CM48D 1,400 46.5 31.8 14.50 12.00 47.5 31.4 9.00 3.60 2.66 42.0 33.4
TH4B4821S ME20DN21 24.5 CF/CM60D 1,400 47.0 32.2 14.75 12.25 47.5 31.2 9.00 3.58 2.64 42.4 34.1
TH4B6021S AE60DX21 24.5 – 1640 55.5 38.5 14.25 12.00 57.0 37.8 9.00 3.88 2.82 51.9 41.0
TH4B6021S AVC60DX21 24.5 – 1550 55.5 38.5 14.25 12.00 57.0 37.8 9.00 3.88 2.82 51.9 41.0
TH4B6021S ME20DN21 24.5 CF/CM64D 1600 55.0 38.0 14.25 12.00 57.0 37.6 9.25 3.88 2.82 51.6 40.9
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
1. Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period.
2. Heating MBH based on AHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period.
COP (Coefficient of Performance) equals Heating MBH output divided by (total KW input x 3.412).
SYSTEM CAPACITY - Single Piece and Modular Air Handlers
UNIT
MODEL
AIR HANDLER
COIL
MODEL
3
RATED
CFM
COOLING
1
HEATING
2
TVA COOLING
MODEL WIDTH
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
8 Johnson Controls Unitary Products
— = Not Applicable.
MP Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
SYSTEM CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL
CFM RANGE
(MIN.-MAX.)
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER 1EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
TH4B1821S CF/CM/CU18A 14.5 450 - 750 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B1821S CF/CM/CU18B 17.5 450 - 750 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B1821S CF/CM/CU24A 21.0 450 - 750 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B1821S CF/CM/CU24B 14.5 450 - 750 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B1821S CF/CM/CU24C 17.5 450 - 750 600 17.8 12.7 14.00 12.00 17.5 12.1 8.50 3.52 2.38 16.1 14.1
TH4B2421S CF/CM/CU24A 14.5 600 - 1000 800 23.6 16.9 14.00 11.50 24.0 15.4 8.25 3.50 2.32 21.8 19.4
TH4B2421S CF/CM/CU24B 17.5 600 - 1000 800 23.6 16.9 14.00 11.50 24.0 15.4 8.25 3.50 2.32 21.8 19.4
TH4B2421S CF/CM/CU24C 21.0 600 - 1000 800 23.6 16.9 14.00 11.50 24.0 15.4 8.25 3.50 2.32 21.8 19.4
TH4B2421S CF/CM/CU30B 17.5 600 - 1000 800 24.0 17.4 14.50 12.00 24.0 15.9 8.25 3.70 2.50 21.8 19.7
TH4B2421S CF/CM/CU30C 21.0 600 - 1000 800 24.0 17.4 14.50 12.00 24.0 15.9 8.25 3.70 2.50 21.8 19.7
TH4B2421S CF/CM/CU30D 24.5 600 - 1000 800 24.0 17.4 14.50 12.00 24.0 15.9 8.25 3.70 2.50 21.8 19.7
TH4B3021S CF/CM/CU36B 17.5 800 - 1200 1000 28.8 21.2 14.00 12.00 29.6 20.0 8.50 3.74 2.62 26.1 23.4
TH4B3021S CF/CM/CU36C 21.0 800 - 1200 1000 28.8 21.2 14.00 12.00 29.6 20.0 8.50 3.74 2.62 26.3 23.4
TH4B3021S CF/CM/CU36D 24.5 800 - 1200 1000 28.8 21.2 14.00 12.00 29.6 20.0 8.50 3.74 2.62 26.3 23.4
TH4B3021S CF/CM/CU42C 21.0 800 - 1200 1000 29.2 21.6 14.00 12.00 29.2 19.6 8.50 3.74 2.60 26.3 23.4
TH4B3021S CF/CM/CU42D 24.5 800 - 1200 1000 29.2 21.6 14.00 12.00 29.2 19.6 8.50 3.74 2.60 26.7 23.8
TH4B3021S CF/CM36A 14.5 800 - 1200 900 28.4 20.2 14.00 12.00 29.4 20.0 8.50 3.68 2.62 26.7 23.8
TH4B3621H CF/CM/CU48C 21.0 1000 - 1400 1175 33.6 23.8 14.00 11.75 34.0 20.0 8.20 3.48 2.48 33.9 26.3
TH4B3621H CF/CM/CU48D 24.5 1000 - 1400 1175 33.6 23.8 14.00 11.75 34.0 20.0 8.20 3.48 2.48 33.9 26.3
TH4B4821S CF/CM/CU60C 21.0 1400 - 1600 1,600 47.0 33.8 14.00 11.75 47.5 32.0 8.20 3.54 2.50 42.4 33.4
TH4B4821S CF/CM/CU60D 24.5 1400 - 1600 1,600 47.0 33.8 14.0 11.8 47.5 32.0 8.20 3.54 2.50 42.4 33.4
For rated condition information, see the footnotes below the System Capacity - Single Piece and Modular Air Handlers table.
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
5005749-CTG-A-0216
Johnson Controls Unitary Products 9
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
TH4B1821S TM8V060A12MP11 14.5 CF/CM/CU18A 525 17.6 12.0 14.25 12.25 17.3 11.8 8.50 3.56 2.46 16.4 14.5
TH4B1821S TM8V080B12MP11 17.5 CF/CM/CU24B 675 18.0 13.5 14.75 12.50 17.5 11.8 8.50 3.82 2.54 16.1 14.3
TH4B1821S TM8X060A12MP11 14.5 CF/CM/CU18A 600 17.9 12.8 14.25 12.25 17.5 11.9 8.50 3.64 2.46 16.2 14.4
TH4B1821S TM8X060A12MP11 14.5 CF/CM/CU24A 600 17.9 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.3
TH4B1821S TM8X080B12MP11 17.5 CF/CM/CU18B 600 17.9 12.8 14.50 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.4
TH4B1821S TM8X080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.2
TH4B1821S TM8X080C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TM8X100C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TM8Y060A12MP11 14.5 CF/CM/CU18A 600 17.9 12.8 14.25 12.25 17.5 11.9 8.50 3.64 2.46 16.2 14.4
TH4B1821S TM8Y060A12MP11 14.5 CF/CM/CU24A 600 17.9 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.3
TH4B1821S TM8Y080B12MP11 17.5 CF/CM/CU18B 600 17.9 12.8 14.50 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.4
TH4B1821S TM8Y080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.2
TH4B1821S TM8Y080C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TM8Y100C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TM9E040A10MP11 14.5 CF/CM/CU18A 600 17.9 12.8 14.50 12.50 17.5 11.9 8.50 3.68 2.48 16.2 14.4
TH4B1821S TM9E040A10MP11 14.5 CF/CM/CU24A 575 18.0 12.8 14.50 12.50 17.5 11.8 8.50 3.72 2.52 16.3 14.6
TH4B1821S TM9E060B12MP11 17.5 CF/CM/CU24B 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.3
TH4B1821S TM9E080B12MP11 17.5 CF/CM/CU24B 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.3
TH4B1821S TM9E080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.8 14.75 12.50 17.5 11.8 8.75 3.76 2.54 16.2 14.3
TH4B1821S TM9E100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.8 14.75 12.50 17.5 11.8 8.75 3.76 2.54 16.2 14.3
TH4B1821S TM9V060B12MP11 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
TH4B1821S TM9V080B12MP11 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
TH4B1821S TM9Y040A10MP11 14.5 CF/CM/CU18A 600 17.9 12.8 14.50 12.50 17.5 11.9 8.50 3.68 2.48 16.2 14.4
TH4B1821S TM9Y040A10MP11 14.5 CF/CM/CU24A 575 18.0 12.8 14.50 12.50 17.5 11.8 8.50 3.72 2.52 16.3 14.6
TH4B1821S TM9Y060B12MP11 17.5 CF/CM/CU24B 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.3
TH4B1821S TM9Y080B12MP11 17.5 CF/CM/CU24B 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.3
TH4B1821S TM9Y080C16MP11 21.0 CF/CM/CU24C 600 18.0 12.8 14.75 12.50 17.5 11.8 8.75 3.76 2.54 16.2 14.3
TH4B1821S TM9Y100C16MP11 21.0 CF/CM/CU24C 600 18.0 12.8 14.75 12.50 17.5 11.8 8.75 3.76 2.54 16.2 14.3
TH4B1821S TMLV060A12MP11 14.5 CF/CM/CU18A 525 17.6 12.0 14.25 12.25 17.3 11.8 8.50 3.56 2.46 16.4 14.5
TH4B1821S TMLV080B12MP11 17.5 CF/CM/CU24B 675 18.0 13.5 14.75 12.50 17.5 11.8 8.50 3.82 2.54 16.1 14.3
TH4B1821S TMLX060A12MP11 14.5 CF/CM/CU18A 600 17.9 12.8 14.25 12.25 17.5 11.9 8.50 3.64 2.46 16.2 14.4
TH4B1821S TMLX060A12MP11 14.5 CF/CM/CU24A 600 17.9 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.3
TH4B1821S TMLX080B12MP11 17.5 CF/CM/CU18B 600 17.9 12.8 14.50 12.25 17.5 11.9 8.50 3.66 2.48 16.2 14.4
TH4B1821S TMLX080B12MP11 17.5 CF/CM/CU24B 600 18.0 12.7 14.50 12.25 17.5 11.8 8.50 3.70 2.50 16.2 14.2
TH4B1821S TMLX080C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TMLX100C16MP11 21.0 CF/CM/CU24C 600 17.9 12.7 14.25 12.25 17.5 11.9 8.50 3.68 2.48 16.2 14.3
TH4B1821S TP9C060B12MP12 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
For Notes See Page 29.
5005749-CTG-A-0216
10 Johnson Controls Unitary Products
TH4B1821S TP9C080B12MP12 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
TH4B1821S TPLC060A12MP12 14.5 CF/CM/CU18A 525 17.6 12.0 14.25 12.25 17.3 11.8 8.50 3.56 2.46 16.4 14.5
TH4B1821S TPLC080B12MP12 17.5 CF/CM/CU24B 675 18.0 13.5 14.75 12.50 17.5 11.8 8.50 3.82 2.54 16.1 14.3
TH4B1821S CP9C060B12MP12 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
TH4B1821S CP9C080B12MP12 17.5 CF/CM/CU24B 575 18.0 12.7 15.00 12.75 17.5 11.7 8.75 3.80 2.56 16.3 14.5
TH4B1821S CPLC060A12MP12 14.5 CF/CM/CU18A 525 17.6 12.0 14.25 12.25 17.3 11.8 8.50 3.56 2.46 16.4 14.5
TH4B1821S CPLC080B12MP12 17.5 CF/CM/CU24B 675 18.0 13.5 14.75 12.50 17.5 11.8 8.50 3.82 2.54 16.1 14.3
TH4B2421S TM8V060A12MP11 14.5 CF/CM/CU24A 725 23.6 16.4 14.75 12.25 23.4 15.1 8.25 3.54 2.40 22.1 19.8
TH4B2421S TM8V060A12MP11 14.5 CF/CM/CU30A 725 24.0 16.9 15.75 12.75 23.8 15.5 8.50 3.78 2.58 22.1 20.0
TH4B2421S TM8V080B12MP11 17.5 CF/CM/CU24B 675 23.6 15.9 15.00 12.50 23.2 15.0 8.25 3.52 2.40 22.3 19.9
TH4B2421S TM8V080B12MP11 17.5 CF/CM/CU30B 800 24.0 17.4 15.75 13.00 24.0 15.5 8.50 3.88 2.60 21.8 19.7
TH4B2421S TM8X060A12MP11 14.5 CF/CM/CU24A 800 24.0 17.1 15.25 12.75 23.6 15.0 8.50 3.70 2.44 21.8 19.3
TH4B2421S TM8X060A12MP11 14.5 CF/CM/CU30A 700 24.0 16.6 16.00 13.00 23.6 15.3 8.50 3.82 2.62 22.2 20.1
TH4B2421S TM8X080B12MP11 17.5 CF/CM/CU24B 725 23.6 16.5 15.50 12.75 23.2 14.9 8.50 3.62 2.46 22.1 19.9
TH4B2421S TM8X080B12MP11 17.5 CF/CM/CU30B 725 24.0 16.9 16.00 13.00 23.6 15.3 8.50 3.88 2.64 22.1 20.1
TH4B2421S TM8X080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.4
TH4B2421S TM8X080C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TM8X080C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TM8X100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.5
TH4B2421S TM8X100C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TM8X100C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TM8X100C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8X100C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8X120C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8X120C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8Y060A12MP11 14.5 CF/CM/CU24A 800 24.0 17.1 15.25 12.75 23.6 15.0 8.50 3.70 2.44 21.8 19.3
TH4B2421S TM8Y060A12MP11 14.5 CF/CM/CU30A 700 24.0 16.6 16.00 13.00 23.6 15.3 8.50 3.82 2.62 22.2 20.1
TH4B2421S TM8Y080B12MP11 17.5 CF/CM/CU24B 725 23.6 16.5 15.50 12.75 23.2 14.9 8.50 3.62 2.46 22.1 19.9
TH4B2421S TM8Y080B12MP11 17.5 CF/CM/CU30B 725 24.0 16.9 16.00 13.00 23.6 15.3 8.50 3.88 2.64 22.1 20.1
TH4B2421S TM8Y080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.4
TH4B2421S TM8Y080C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TM8Y080C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TM8Y100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.5
TH4B2421S TM8Y100C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TM8Y100C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TM8Y100C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8Y100C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 11
TH4B2421S TM8Y120C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM8Y120C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TM9E040A10MP11 14.5 CF/CM/CU24A 750 23.8 16.6 14.50 12.00 23.6 15.2 8.25 3.54 2.40 22.0 19.6
TH4B2421S TM9E040A10MP11 14.5 CF/CM/CU30A 775 24.0 17.3 15.75 12.75 24.0 15.6 8.50 3.84 2.58 21.9 19.9
TH4B2421S TM9E060B12MP11 17.5 CF/CM/CU24B 750 24.0 16.8 15.50 12.75 23.4 15.0 8.50 3.66 2.46 22.0 19.6
TH4B2421S TM9E060B12MP11 17.5 CF/CM/CU30B 750 24.0 17.1 16.00 13.00 23.8 15.3 8.50 3.90 2.64 22.0 19.9
TH4B2421S TM9E080B12MP11 17.5 CF/CM/CU24B 750 24.0 16.8 15.50 12.75 23.4 15.0 8.50 3.66 2.46 22.0 19.6
TH4B2421S TM9E080B12MP11 17.5 CF/CM/CU30B 750 24.0 17.1 16.00 13.00 23.8 15.3 8.50 3.90 2.64 22.0 19.9
TH4B2421S TM9E080C16MP11 21.0 CF/CM/CU24C 750 24.0 16.9 15.50 12.75 23.4 14.9 8.50 3.68 2.48 22.0 19.7
TH4B2421S TM9E080C16MP11 21.0 CF/CM/CU30C 750 24.0 17.2 16.00 13.00 23.8 15.3 8.50 3.94 2.66 22.0 20.0
TH4B2421S TM9E100C16MP11 21.0 CF/CM/CU24C 750 24.0 16.9 15.50 12.75 23.4 14.9 8.50 3.68 2.48 22.0 19.7
TH4B2421S TM9E100C16MP11 21.0 CF/CM/CU30C 750 24.0 17.2 16.00 13.00 23.8 15.3 8.50 3.94 2.66 22.0 20.0
TH4B2421S TM9E100C20MP11 21.0 CF/CM/CU24C 800 24.0 17.1 15.00 12.25 23.6 15.1 8.50 3.64 2.40 21.8 19.3
TH4B2421S TM9E100C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.75 12.75 24.0 15.5 8.50 3.86 2.60 21.8 19.6
TH4B2421S TM9E100C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.75 12.75 24.0 15.5 8.50 3.86 2.60 21.8 19.6
TH4B2421S TM9E120D20MP11 24.5 CF/CM/CU30D 800 24.0 17.3 16.00 13.00 24.0 15.5 8.50 3.90 2.62 21.8 19.5
TH4B2421S TM9V040A10MP11 14.5 CF/CM/CU24A 675 23.2 15.6 14.00 11.75 23.6 15.3 8.25 3.42 2.34 21.9 19.5
TH4B2421S TM9V040A10MP11 14.5 CF/CM/CU30A 700 24.0 16.6 15.00 12.25 24.0 15.6 8.25 3.68 2.52 22.2 20.1
TH4B2421S TM9V060B12MP11 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.8 19.4
TH4B2421S TM9V060B12MP11 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.4 20.3
TH4B2421S TM9V080B12MP11 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.8 19.4
TH4B2421S TM9V080B12MP11 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.4 20.3
TH4B2421S TM9Y040A10MP11 14.5 CF/CM/CU24A 750 23.8 16.6 14.50 12.00 23.6 15.2 8.25 3.54 2.40 22.0 19.6
TH4B2421S TM9Y040A10MP11 14.5 CF/CM/CU30A 775 24.0 17.3 15.75 12.75 24.0 15.6 8.50 3.84 2.58 21.9 19.9
TH4B2421S TM9Y060B12MP11 17.5 CF/CM/CU24B 750 24.0 16.8 15.50 12.75 23.4 15.0 8.50 3.66 2.46 22.0 19.6
TH4B2421S TM9Y060B12MP11 17.5 CF/CM/CU30B 750 24.0 17.1 16.00 13.00 23.8 15.3 8.50 3.90 2.64 22.0 19.9
TH4B2421S TM9Y080B12MP11 17.5 CF/CM/CU24B 750 24.0 16.8 15.50 12.75 23.4 15.0 8.50 3.66 2.46 22.0 19.6
TH4B2421S TM9Y080B12MP11 17.5 CF/CM/CU30B 750 24.0 17.1 16.00 13.00 23.8 15.3 8.50 3.90 2.64 22.0 19.9
TH4B2421S TM9Y080C16MP11 21.0 CF/CM/CU24C 750 24.0 16.9 15.50 12.75 23.4 14.9 8.50 3.68 2.48 22.0 19.7
TH4B2421S TM9Y080C16MP11 21.0 CF/CM/CU30C 750 24.0 17.2 16.00 13.00 23.8 15.3 8.50 3.94 2.66 22.0 20.0
TH4B2421S TM9Y100C16MP11 21.0 CF/CM/CU24C 750 24.0 16.9 15.50 12.75 23.4 14.9 8.50 3.68 2.48 22.0 19.7
TH4B2421S TM9Y100C16MP11 21.0 CF/CM/CU30C 750 24.0 17.2 16.00 13.00 23.8 15.3 8.50 3.94 2.66 22.0 20.0
TH4B2421S TM9Y100C20MP11 21.0 CF/CM/CU24C 800 24.0 17.1 15.00 12.25 23.6 15.1 8.50 3.64 2.40 21.8 19.3
TH4B2421S TM9Y100C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.75 12.75 24.0 15.5 8.50 3.86 2.60 21.8 19.6
TH4B2421S TM9Y100C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.75 12.75 24.0 15.5 8.50 3.86 2.60 21.8 19.6
TH4B2421S TM9Y120D20MP11 24.5 CF/CM/CU30D 800 24.0 17.3 16.00 13.00 24.0 15.5 8.50 3.90 2.62 21.8 19.5
TH4B2421S TMLV060A12MP11 14.5 CF/CM/CU24A 725 23.6 16.4 14.75 12.25 23.4 15.1 8.25 3.54 2.40 22.1 19.8
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
12 Johnson Controls Unitary Products
TH4B2421S TMLV060A12MP11 14.5 CF/CM/CU30A 725 24.0 16.9 15.75 12.75 23.8 15.5 8.50 3.78 2.58 22.1 20.0
TH4B2421S TMLV080B12MP11 17.5 CF/CM/CU24B 675 23.6 15.9 15.00 12.50 23.2 15.0 8.25 3.52 2.40 22.3 19.9
TH4B2421S TMLV080B12MP11 17.5 CF/CM/CU30B 800 24.0 17.4 15.75 13.00 24.0 15.5 8.50 3.88 2.60 21.8 19.7
TH4B2421S TMLX060A12MP11 14.5 CF/CM/CU24A 800 24.0 17.1 15.25 12.75 23.6 15.0 8.50 3.70 2.44 21.8 19.3
TH4B2421S TMLX060A12MP11 14.5 CF/CM/CU30A 700 24.0 16.6 16.00 13.00 23.6 15.3 8.50 3.82 2.62 22.2 20.1
TH4B2421S TMLX080B12MP11 17.5 CF/CM/CU24B 725 23.6 16.5 15.50 12.75 23.2 14.9 8.50 3.62 2.46 22.1 19.9
TH4B2421S TMLX080B12MP11 17.5 CF/CM/CU30B 725 24.0 16.9 16.00 13.00 23.6 15.3 8.50 3.88 2.64 22.1 20.1
TH4B2421S TMLX080C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.4
TH4B2421S TMLX080C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TMLX080C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.6
TH4B2421S TMLX100C16MP11 21.0 CF/CM/CU24C 800 24.0 17.2 15.75 13.00 23.4 14.9 8.50 3.74 2.46 21.8 19.5
TH4B2421S TMLX100C16MP11 21.0 CF/CM/CU30C 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TMLX100C16MP11 21.0 CF/CM/CU30D 800 24.0 17.4 16.00 13.00 23.8 15.3 8.50 4.00 2.68 21.8 19.5
TH4B2421S TMLX100C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TMLX100C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TMLX120C20MP11 21.0 CF/CM/CU30C 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TMLX120C20MP11 21.0 CF/CM/CU30D 800 24.0 17.3 15.25 12.50 24.0 15.7 8.50 3.80 2.56 21.8 19.5
TH4B2421S TP9C060B12MP12 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.9 19.5
TH4B2421S TP9C060B12MP12 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.2 20.1
TH4B2421S TP9C080B12MP12 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.8 19.4
TH4B2421S TP9C080B12MP12 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.4 20.3
TH4B2421S TPLC060A12MP12 14.5 CF/CM/CU24A 725 23.6 16.4 14.75 12.25 23.4 15.1 8.25 3.54 2.40 21.8 19.4
TH4B2421S TPLC060A12MP12 14.5 CF/CM/CU30A 725 24.0 16.9 15.75 12.75 23.8 15.5 8.50 3.78 2.58 22.4 20.3
TH4B2421S TPLC080B12MP12 17.5 CF/CM/CU24B 675 23.6 15.9 15.00 12.50 23.2 15.0 8.25 3.52 2.40 22.3 19.9
TH4B2421S TPLC080B12MP12 17.5 CF/CM/CU30B 800 24.0 17.4 15.75 13.00 24.0 15.5 8.50 3.88 2.60 21.8 19.7
TH4B2421S CP9C060B12MP12 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.9 19.5
TH4B2421S CP9C060B12MP12 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.2 20.1
TH4B2421S CP9C080B12MP12 17.5 CF/CM/CU24B 800 24.0 17.2 15.75 13.00 23.4 14.8 8.50 3.76 2.48 21.8 19.4
TH4B2421S CP9C080B12MP12 17.5 CF/CM/CU30B 650 24.0 16.2 15.75 13.00 23.6 15.3 8.50 3.70 2.56 22.4 20.3
TH4B2421S CPLC060A12MP12 14.5 CF/CM/CU24A 725 23.6 16.4 14.75 12.25 23.4 15.1 8.25 3.54 2.40 21.8 19.4
TH4B2421S CPLC060A12MP12 14.5 CF/CM/CU30A 725 24.0 16.9 15.75 12.75 23.8 15.5 8.50 3.78 2.58 22.4 20.3
TH4B2421S CPLC080B12MP12 17.5 CF/CM/CU24B 675 23.6 15.9 15.00 12.50 23.2 15.0 8.25 3.52 2.40 22.3 19.9
TH4B2421S CPLC080B12MP12 17.5 CF/CM/CU30B 800 24.0 17.4 15.75 13.00 24.0 15.5 8.50 3.88 2.60 21.8 19.7
TH4B3021S TM8V060A12MP11 14.5 CF/CM36A 975 28.8 21.2 14.25 12.00 29.4 19.8 8.75 3.80 2.66 26.3 23.7
TH4B3021S TM8V080B12MP11 17.5 CF/CM/CU36B 1025 29.2 21.8 14.75 12.50 29.4 19.7 8.75 3.86 2.70 26.6 23.8
TH4B3021S TM8V080B12MP11 17.5 CF42B 1000 29.4 21.8 15.00 12.50 29.0 19.3 8.75 3.86 2.66 27.0 24.0
TH4B3021S TM8V080C16MP11 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 13
TH4B3021S TM8V080C16MP11 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S TM8V100C16MP11 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S TM8V100C16MP11 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S TM8X060A12MP11 14.5 CF/CM36A 975 29.0 21.2 15.00 12.50 29.2 19.6 8.75 3.86 2.72 26.5 23.7
TH4B3021S TM8X080B12MP11 17.5 CF/CM/CU36B 1000 29.2 21.8 15.25 12.75 29.2 19.6 9.00 3.92 2.74 26.7 24.0
TH4B3021S TM8X080B12MP11 17.5 CF42B 1000 29.4 22.0 15.25 12.50 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM8X080C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8X080C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8X080C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8X080C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8X100C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8X100C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8X100C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8X100C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8X100C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8X100C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8X100C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8X100C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8X120C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8X120C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8X120C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8X120C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8Y060A12MP11 14.5 CF/CM36A 975 29.0 21.2 15.00 12.50 29.2 19.6 8.75 3.86 2.72 26.5 23.7
TH4B3021S TM8Y080B12MP11 17.5 CF/CM/CU36B 1000 29.2 21.8 15.25 12.75 29.2 19.6 9.00 3.92 2.74 26.7 24.0
TH4B3021S TM8Y080B12MP11 17.5 CF42B 1000 29.4 22.0 15.25 12.50 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM8Y080C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8Y080C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8Y080C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8Y080C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8Y100C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8Y100C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8Y100C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8Y100C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM8Y100C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8Y100C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8Y100C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8Y100C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
14 Johnson Controls Unitary Products
TH4B3021S TM8Y120C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TM8Y120C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TM8Y120C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TM8Y120C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TM9E040A10MP11 14.5 CF/CM36A 875 28.6 20.2 14.50 12.00 29.2 19.8 8.75 3.74 2.66 26.3 23.7
TH4B3021S TM9E060B12MP11 17.5 CF/CM/CU36B 900 28.8 20.4 15.25 12.50 29.0 19.5 9.00 3.86 2.74 26.5 23.6
TH4B3021S TM9E060B12MP11 17.5 CF42B 900 29.6 21.0 15.50 13.00 28.4 19.0 8.75 3.86 2.70 27.4 24.3
TH4B3021S TM9E080B12MP11 17.5 CF/CM/CU36B 900 28.8 20.4 15.25 12.50 29.0 19.5 9.00 3.86 2.74 26.5 23.6
TH4B3021S TM9E080B12MP11 17.5 CF42B 900 29.6 21.0 15.50 13.00 28.4 19.0 8.75 3.86 2.70 27.4 24.3
TH4B3021S TM9E080C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.6 15.00 12.50 29.2 19.6 8.75 3.90 2.72 26.7 23.8
TH4B3021S TM9E080C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.00 12.50 29.2 19.6 8.75 3.90 2.74 26.7 24.0
TH4B3021S TM9E080C16MP11 21.0 CF/CM/CU42C 1000 29.4 22.0 15.25 12.50 28.8 19.2 8.75 3.90 2.70 27.0 24.3
TH4B3021S TM9E080C16MP11 21.0 CF/CM/CU42D 1000 29.4 22.0 15.25 12.75 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM9E100C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.6 15.00 12.50 29.2 19.6 8.75 3.90 2.72 26.7 23.8
TH4B3021S TM9E100C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.00 12.50 29.2 19.6 8.75 3.90 2.74 26.7 24.0
TH4B3021S TM9E100C16MP11 21.0 CF/CM/CU42C 1000 29.4 22.0 15.25 12.50 28.8 19.2 8.75 3.90 2.70 27.0 24.3
TH4B3021S TM9E100C16MP11 21.0 CF/CM/CU42D 1000 29.4 22.0 15.25 12.75 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM9E100C20MP11 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 12.75 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TM9E100C20MP11 21.0 CF/CM/CU36D 975 29.2 21.6 15.75 13.00 29.0 19.4 9.00 3.98 2.78 26.7 24.1
TH4B3021S TM9E100C20MP11 21.0 CF/CM/CU42C 975 29.6 22.2 16.00 13.00 28.6 18.9 9.00 4.00 2.76 27.3 24.8
TH4B3021S TM9E100C20MP11 21.0 CF/CM/CU42D 975 29.6 22.2 16.00 13.00 28.6 18.9 9.00 4.02 2.76 27.3 24.8
TH4B3021S TM9E120D20MP11 24.5 CF/CM/CU36D 975 29.2 21.6 16.00 13.00 28.8 19.3 9.00 4.00 2.80 26.9 24.1
TH4B3021S TM9E120D20MP11 24.5 CF/CM/CU42D 975 29.8 22.2 16.00 13.00 28.4 18.9 9.00 4.04 2.78 27.3 24.6
TH4B3021S TM9V060B12MP11 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S TM9V060B12MP11 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S TM9V080B12MP11 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S TM9V080B12MP11 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S TM9V080C16MP11 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TM9V080C16MP11 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S TM9V100C16MP11 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TM9V100C16MP11 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S TM9V100C20MP11 21.0 CF/CM/CU36C 1075 29.0 22.4 15.00 12.50 29.2 19.6 8.75 3.96 2.74 26.3 23.9
TH4B3021S TM9V120D20MP11 24.5 CF/CM/CU36D 1125 29.8 23.2 16.00 13.00 29.0 19.3 9.25 4.12 2.84 27.0 24.2
TH4B3021S TM9V120D20MP11 24.5 CF/CM/CU42D 1125 29.8 23.2 15.50 13.00 29.0 19.7 9.00 4.04 2.80 27.0 24.1
TH4B3021S TM9Y040A10MP11 14.5 CF/CM36A 875 28.6 20.2 14.50 12.00 29.2 19.8 8.75 3.74 2.66 26.3 23.7
TH4B3021S TM9Y060B12MP11 17.5 CF/CM/CU36B 900 28.8 20.4 15.25 12.50 29.0 19.5 9.00 3.86 2.74 26.5 23.6
TH4B3021S TM9Y060B12MP11 17.5 CF42B 900 29.6 21.0 15.50 13.00 28.4 19.0 8.75 3.86 2.70 27.4 24.3
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 15
TH4B3021S TM9Y080B12MP11 17.5 CF/CM/CU36B 900 28.8 20.4 15.25 12.50 29.0 19.5 9.00 3.86 2.74 26.5 23.6
TH4B3021S TM9Y080B12MP11 17.5 CF42B 900 29.6 21.0 15.50 13.00 28.4 19.0 8.75 3.86 2.70 27.4 24.3
TH4B3021S TM9Y080C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.6 15.00 12.50 29.2 19.6 8.75 3.90 2.72 26.7 23.8
TH4B3021S TM9Y080C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.00 12.50 29.2 19.6 8.75 3.90 2.74 26.7 24.0
TH4B3021S TM9Y080C16MP11 21.0 CF/CM/CU42C 1000 29.4 22.0 15.25 12.50 28.8 19.2 8.75 3.90 2.70 27.0 24.3
TH4B3021S TM9Y080C16MP11 21.0 CF/CM/CU42D 1000 29.4 22.0 15.25 12.75 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM9Y100C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.6 15.00 12.50 29.2 19.6 8.75 3.90 2.72 26.7 23.8
TH4B3021S TM9Y100C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.00 12.50 29.2 19.6 8.75 3.90 2.74 26.7 24.0
TH4B3021S TM9Y100C16MP11 21.0 CF/CM/CU42C 1000 29.4 22.0 15.25 12.50 28.8 19.2 8.75 3.90 2.70 27.0 24.3
TH4B3021S TM9Y100C16MP11 21.0 CF/CM/CU42D 1000 29.4 22.0 15.25 12.75 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TM9Y100C20MP11 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 12.75 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TM9Y100C20MP11 21.0 CF/CM/CU36D 975 29.2 21.6 15.75 13.00 29.0 19.4 9.00 3.98 2.78 26.7 24.1
TH4B3021S TM9Y100C20MP11 21.0 CF/CM/CU42C 975 29.6 22.2 16.00 13.00 28.6 18.9 9.00 4.00 2.76 27.3 24.8
TH4B3021S TM9Y100C20MP11 21.0 CF/CM/CU42D 975 29.6 22.2 16.00 13.00 28.6 18.9 9.00 4.02 2.76 27.3 24.8
TH4B3021S TM9Y120D20MP11 24.5 CF/CM/CU36D 975 29.2 21.6 16.00 13.00 28.8 19.3 9.00 4.00 2.80 26.9 24.1
TH4B3021S TM9Y120D20MP11 24.5 CF/CM/CU42D 975 29.8 22.2 16.00 13.00 28.4 18.9 9.00 4.04 2.78 27.3 24.6
TH4B3021S TMLV060A12MP11 14.5 CF/CM36A 975 28.8 21.2 14.25 12.00 29.4 19.8 8.75 3.80 2.66 26.3 23.7
TH4B3021S TMLV080B12MP11 17.5 CF/CM/CU36B 1025 29.2 21.8 14.75 12.50 29.4 19.7 8.75 3.86 2.70 26.6 23.8
TH4B3021S TMLV080B12MP11 17.5 CF42B 1000 29.4 21.8 15.00 12.50 29.0 19.3 8.75 3.86 2.66 27.0 24.0
TH4B3021S TMLV080C16MP11 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S TMLV080C16MP11 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S TMLV100C16MP11 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S TMLV100C16MP11 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S TMLX060A12MP11 14.5 CF/CM36A 975 29.0 21.2 15.00 12.50 29.2 19.6 8.75 3.86 2.72 26.5 23.7
TH4B3021S TMLX080B12MP11 17.5 CF/CM/CU36B 1000 29.2 21.8 15.25 12.75 29.2 19.6 9.00 3.92 2.74 26.7 24.0
TH4B3021S TMLX080B12MP11 17.5 CF42B 1000 29.4 22.0 15.25 12.50 28.8 19.1 9.00 3.92 2.70 27.0 24.3
TH4B3021S TMLX080C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TMLX080C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TMLX080C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TMLX080C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TMLX100C16MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TMLX100C16MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TMLX100C16MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TMLX100C16MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TMLX100C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TMLX100C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TMLX100C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
16 Johnson Controls Unitary Products
TH4B3021S TMLX100C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TMLX120C20MP11 21.0 CF/CM/CU36C 1000 29.2 21.8 15.25 12.75 29.0 19.5 9.00 3.94 2.76 26.7 24.0
TH4B3021S TMLX120C20MP11 21.0 CF/CM/CU36D 1000 29.2 21.8 15.50 12.75 29.0 19.5 9.00 3.94 2.76 26.8 24.0
TH4B3021S TMLX120C20MP11 21.0 CF/CM/CU42C 1000 29.6 22.0 15.50 13.00 28.6 19.1 9.00 3.96 2.72 27.2 24.3
TH4B3021S TMLX120C20MP11 21.0 CF/CM/CU42D 1000 29.6 22.0 15.50 12.75 28.6 19.0 9.00 3.96 2.74 27.2 24.3
TH4B3021S TP9C060B12MP12 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S TP9C060B12MP12 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S TP9C080B12MP12 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S TP9C080B12MP12 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S TP9C080C16MP12 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TP9C080C16MP12 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S TP9C100C16MP12 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S TP9C100C16MP12 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S TP9C100C20MP12 21.0 CF/CM/CU36C 1075 29.0 22.4 15.00 12.50 29.2 19.6 8.75 3.96 2.74 26.3 23.9
TH4B3021S TP9C120D20MP12 24.5 CF/CM/CU36D 1125 29.8 23.2 16.00 13.00 29.0 19.3 9.25 4.12 2.84 27.0 24.2
TH4B3021S TP9C120D20MP12 24.5 CF/CM/CU42D 1125 29.8 23.2 15.50 13.00 29.0 19.7 9.00 4.04 2.80 27.0 24.1
TH4B3021S TPLC060A12MP12 14.5 CF/CM36A 975 28.8 21.2 14.25 12.00 29.4 19.8 8.75 3.80 2.66 26.3 23.7
TH4B3021S TPLC080B12MP12 17.5 CF/CM/CU36B 1025 29.2 21.8 14.75 12.50 29.4 19.7 8.75 3.86 2.70 26.6 23.8
TH4B3021S TPLC080B12MP12 17.5 CF42B 1000 29.4 21.8 15.00 12.50 29.0 19.3 8.75 3.86 2.66 27.0 24.0
TH4B3021S TPLC080C16MP12 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S TPLC080C16MP12 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S TPLC100C16MP12 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S TPLC100C16MP12 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S CP9C060B12MP12 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S CP9C060B12MP12 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S CP9C080B12MP12 17.5 CF/CM/CU36B 950 29.0 21.2 15.00 12.50 29.0 19.6 9.00 3.88 2.72 26.6 24.0
TH4B3021S CP9C080B12MP12 17.5 CF42B 925 29.8 21.4 15.50 13.00 28.6 19.0 9.00 3.90 2.70 27.3 24.3
TH4B3021S CP9C080C16MP12 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S CP9C080C16MP12 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S CP9C100C16MP12 21.0 CF/CM/CU36C 975 29.2 21.6 15.50 13.00 29.0 19.4 9.00 3.96 2.78 26.7 24.1
TH4B3021S CP9C100C16MP12 21.0 CF/CM/CU42C 975 29.6 22.0 15.75 13.00 28.6 19.0 9.00 3.98 2.74 27.3 24.6
TH4B3021S CP9C100C20MP12 21.0 CF/CM/CU36C 1075 29.0 22.4 15.00 12.50 29.2 19.6 8.75 3.96 2.74 26.3 23.9
TH4B3021S CP9C120D20MP12 24.5 CF/CM/CU36D 1125 29.8 23.2 16.00 13.00 29.0 19.3 9.25 4.12 2.84 27.0 24.2
TH4B3021S CP9C120D20MP12 24.5 CF/CM/CU42D 1125 29.8 23.2 15.50 13.00 29.0 19.7 9.00 4.04 2.80 27.0 24.1
TH4B3021S CPLC060A12MP12 14.5 CF/CM36A 975 28.8 21.2 14.25 12.00 29.4 19.8 8.75 3.80 2.66 26.3 23.7
TH4B3021S CPLC080B12MP12 17.5 CF/CM/CU36B 1025 29.2 21.8 14.75 12.50 29.4 19.7 8.75 3.86 2.70 26.6 23.8
TH4B3021S CPLC080B12MP12 17.5 CF42B 1000 29.4 21.8 15.00 12.50 29.0 19.3 8.75 3.86 2.66 27.0 24.0
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 17
TH4B3021S CPLC080C16MP12 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S CPLC080C16MP12 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3021S CPLC100C16MP12 21.0 CF/CM/CU36C 925 28.8 20.6 15.25 12.75 28.8 19.5 9.00 3.88 2.76 26.4 23.5
TH4B3021S CPLC100C16MP12 21.0 CF/CM/CU42C 925 29.8 21.4 15.75 13.00 28.4 19.0 9.00 3.92 2.72 27.3 24.4
TH4B3521S TM8V080B12MP11 17.5 CF42B 1000 34.4 24.0 14.00 11.75 33.6 21.4 8.50 3.50 2.40 34.2 28.7
TH4B3521S TM8V080C16MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TM8V080C16MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TM8V100C16MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TM8V100C16MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TM8V100C20MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TM8V100C20MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S TM8V120C20MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TM8V120C20MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S TM8X080B12MP11 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TM8X080C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM8X080C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
TH4B3521S TM8X080C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TM8X080C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8X100C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM8X100C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
TH4B3521S TM8X100C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TM8X100C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8X100C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TM8X100C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TM8X100C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8X100C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TM8X120C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TM8X120C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TM8X120C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8X120C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TM8Y080B12MP11 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TM8Y080C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM8Y080C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
TH4B3521S TM8Y080C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TM8Y080C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8Y100C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM8Y100C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
18 Johnson Controls Unitary Products
TH4B3521S TM8Y100C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TM8Y100C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8Y100C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TM8Y100C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TM8Y100C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8Y100C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TM8Y120C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TM8Y120C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TM8Y120C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TM8Y120C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TM9E080C16MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 12.00 33.6 21.6 8.50 3.50 2.42 34.1 28.2
TH4B3521S TM9E080C16MP11 21.0 CF/CM/CU36D 1075 34.6 24.4 14.25 12.00 33.6 21.6 8.50 3.52 2.44 34.1 28.2
TH4B3521S TM9E080C16MP11 21.0 CF/CM/CU42C 1225 35.4 26.6 14.00 12.00 34.0 21.6 8.50 3.66 2.46 34.3 29.0
TH4B3521S TM9E080C16MP11 21.0 CF/CM/CU42D 1075 35.0 25.2 14.25 12.25 33.6 21.2 8.75 3.64 2.46 34.5 29.1
TH4B3521S TM9E100C16MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 12.00 33.6 21.6 8.50 3.50 2.42 34.1 28.2
TH4B3521S TM9E100C16MP11 21.0 CF/CM/CU36D 1075 34.6 24.4 14.25 12.00 33.6 21.6 8.50 3.52 2.44 34.1 28.2
TH4B3521S TM9E100C16MP11 21.0 CF/CM/CU42C 1225 35.4 26.6 14.00 12.00 34.0 21.6 8.50 3.66 2.46 34.3 29.0
TH4B3521S TM9E100C16MP11 21.0 CF/CM/CU42D 1075 35.0 25.2 14.25 12.25 33.6 21.2 8.75 3.64 2.46 34.5 29.1
TH4B3521S TM9E100C20MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.25 3.54 2.42 33.9 27.5
TH4B3521S TM9E100C20MP11 21.0 CF/CM/CU36D 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.25 3.54 2.42 33.9 27.5
TH4B3521S TM9E100C20MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 34.0 21.6 8.75 3.68 2.46 34.5 29.0
TH4B3521S TM9E100C20MP11 21.0 CF/CM/CU42D 1200 35.0 25.8 14.00 11.75 33.8 21.6 8.50 3.62 2.44 34.0 28.2
TH4B3521S TM9E120D20MP11 24.5 CF/CM/CU36D 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM9E120D20MP11 24.5 CF/CM/CU42D 1200 35.2 25.8 14.25 12.00 33.8 21.4 8.50 3.64 2.46 34.2 28.2
TH4B3521S TM9V060B12MP11 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TM9V080B12MP11 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TM9V080C16MP11 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
TH4B3521S TM9V100C16MP11 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
TH4B3521S TM9V100C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 11.75 33.6 21.6 8.50 3.48 2.42 34.1 28.2
TH4B3521S TM9V100C20MP11 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.8 8.50 3.66 2.44 34.1 28.8
TH4B3521S TM9V120D20MP11 24.5 CF/CM/CU42D 1125 35.2 26.0 14.50 12.00 33.6 21.4 8.75 3.68 2.48 34.5 29.4
TH4B3521S TM9Y080C16MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 12.00 33.6 21.6 8.50 3.50 2.42 34.1 28.2
TH4B3521S TM9Y080C16MP11 21.0 CF/CM/CU36D 1075 34.6 24.4 14.25 12.00 33.6 21.6 8.50 3.52 2.44 34.1 28.2
TH4B3521S TM9Y080C16MP11 21.0 CF/CM/CU42C 1225 35.4 26.6 14.00 12.00 34.0 21.6 8.50 3.66 2.46 34.3 29.0
TH4B3521S TM9Y080C16MP11 21.0 CF/CM/CU42D 1075 35.0 25.2 14.25 12.25 33.6 21.2 8.75 3.64 2.46 34.5 29.1
TH4B3521S TM9Y100C16MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 12.00 33.6 21.6 8.50 3.50 2.42 34.1 28.2
TH4B3521S TM9Y100C16MP11 21.0 CF/CM/CU36D 1075 34.6 24.4 14.25 12.00 33.6 21.6 8.50 3.52 2.44 34.1 28.2
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 19
TH4B3521S TM9Y100C16MP11 21.0 CF/CM/CU42C 1225 35.4 26.6 14.00 12.00 34.0 21.6 8.50 3.66 2.46 34.3 29.0
TH4B3521S TM9Y100C16MP11 21.0 CF/CM/CU42D 1075 35.0 25.2 14.25 12.25 33.6 21.2 8.75 3.64 2.46 34.5 29.1
TH4B3521S TM9Y100C20MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.25 3.54 2.42 33.9 27.5
TH4B3521S TM9Y100C20MP11 21.0 CF/CM/CU36D 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.25 3.54 2.42 33.9 27.5
TH4B3521S TM9Y100C20MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 34.0 21.6 8.75 3.68 2.46 34.5 29.0
TH4B3521S TM9Y100C20MP11 21.0 CF/CM/CU42D 1200 35.0 25.8 14.00 11.75 33.8 21.6 8.50 3.62 2.44 34.0 28.2
TH4B3521S TM9Y120D20MP11 24.5 CF/CM/CU36D 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TM9Y120D20MP11 24.5 CF/CM/CU42D 1200 35.2 25.8 14.25 12.00 33.8 21.4 8.50 3.64 2.46 34.2 28.2
TH4B3521S TMLV080B12MP11 17.5 CF42B 1000 34.4 24.0 14.00 11.75 33.6 21.4 8.50 3.50 2.40 34.2 28.7
TH4B3521S TMLV080C16MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TMLV080C16MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TMLV100C16MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TMLV100C16MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TMLV100C20MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TMLV100C20MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S TMLV120C20MP11 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TMLV120C20MP11 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S TMLX080B12MP11 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TMLX080C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TMLX080C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
TH4B3521S TMLX080C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TMLX080C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TMLX100C16MP11 21.0 CF/CM/CU36C 1225 35.0 25.4 14.00 11.75 33.8 21.8 8.50 3.56 2.44 33.9 27.5
TH4B3521S TMLX100C16MP11 21.0 CF/CM/CU36D 1075 34.8 24.6 14.50 12.00 33.4 21.6 8.50 3.54 2.46 34.3 28.5
TH4B3521S TMLX100C16MP11 21.0 CF/CM/CU42C 1225 35.6 26.8 14.00 12.00 33.8 21.4 8.75 3.70 2.48 34.5 29.2
TH4B3521S TMLX100C16MP11 21.0 CF/CM/CU42D 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TMLX100C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TMLX100C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TMLX100C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TMLX100C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TMLX120C20MP11 21.0 CF/CM/CU36C 1075 34.6 24.4 14.25 12.00 33.4 21.6 8.50 3.54 2.44 34.1 28.2
TH4B3521S TMLX120C20MP11 21.0 CF/CM/CU36D 1100 34.8 24.8 14.25 12.25 33.4 21.6 8.50 3.56 2.46 34.2 28.4
TH4B3521S TMLX120C20MP11 21.0 CF/CM/CU42C 1075 35.2 25.2 14.50 12.25 33.4 21.2 8.75 3.66 2.48 34.7 29.2
TH4B3521S TMLX120C20MP11 21.0 CF/CM/CU42D 1100 35.4 26.0 14.75 12.50 33.6 21.2 8.75 3.74 2.52 34.8 29.7
TH4B3521S TP9C060B12MP12 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TP9C080B12MP12 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S TP9C080C16MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
20 Johnson Controls Unitary Products
TH4B3521S TP9C100C16MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
TH4B3521S TP9C100C20MP12 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 11.75 33.6 21.6 8.50 3.48 2.42 34.1 28.2
TH4B3521S TP9C100C20MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.8 8.50 3.66 2.44 34.1 28.8
TH4B3521S TP9C120D20MP12 24.5 CF/CM/CU42D 1125 35.2 26.0 14.50 12.00 33.6 21.4 8.75 3.68 2.48 34.5 29.4
TH4B3521S TPLC080B12MP12 17.5 CF42B 1000 34.4 24.0 14.00 11.75 33.6 21.4 8.50 3.50 2.40 34.2 28.7
TH4B3521S TPLC080C16MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TPLC080C16MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TPLC100C16MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S TPLC100C16MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S TPLC100C20MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TPLC100C20MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S TPLC120C20MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S TPLC120C20MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S CP9C060B12MP12 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S CP9C080B12MP12 17.5 CF42B 1175 35.0 25.8 14.00 11.75 34.0 21.6 8.50 3.60 2.42 34.1 28.5
TH4B3521S CP9C080C16MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
TH4B3521S CP9C100C16MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.6 8.50 3.68 2.46 34.1 28.8
TH4B3521S CP9C100C20MP12 21.0 CF/CM/CU36C 1075 34.6 24.4 14.00 11.75 33.6 21.6 8.50 3.48 2.42 34.1 28.2
TH4B3521S CP9C100C20MP12 21.0 CF/CM/CU42C 1275 35.4 27.0 14.00 11.75 34.2 21.8 8.50 3.66 2.44 34.1 28.8
TH4B3521S CP9C120D20MP12 24.5 CF/CM/CU42D 1125 35.2 26.0 14.50 12.00 33.6 21.4 8.75 3.68 2.48 34.5 29.4
TH4B3521S CPLC080B12MP12 17.5 CF42B 1000 34.4 24.0 14.00 11.75 33.6 21.4 8.50 3.50 2.40 34.2 28.7
TH4B3521S CPLC080C16MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S CPLC080C16MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S CPLC100C16MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 12.00 33.6 21.6 8.50 3.54 2.44 34.0 28.2
TH4B3521S CPLC100C16MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.68 2.48 34.6 29.7
TH4B3521S CPLC100C20MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S CPLC100C20MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3521S CPLC120C20MP12 21.0 CF/CM/CU36C 1100 34.6 24.6 14.00 11.75 33.6 21.8 8.50 3.50 2.42 34.0 28.2
TH4B3521S CPLC120C20MP12 21.0 CF/CM/CU42C 1100 35.2 26.0 14.25 12.00 33.8 21.4 8.75 3.66 2.46 34.6 29.7
TH4B3621H TM8V080C16MP11 21.0 CF/CM/CU48C 1150 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.60 34.6 27.1
TH4B3621H TM8V100C16MP11 21.0 CF/CM/CU48C 1150 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.60 34.6 27.1
TH4B3621H TM8V100C20MP11 21.0 CF/CM/CU48D 1225 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.62 2.58 34.1 26.2
TH4B3621H TM8V120C20MP11 21.0 CF/CM/CU48D 1225 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.62 2.58 34.1 26.2
TH4B3621H TM8X080C16MP11 21.0 CF/CM/CU48C 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8X080C16MP11 21.0 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8X100C16MP11 21.0 CF/CM/CU48C 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8X100C16MP11 21.0 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
5005749-CTG-A-0216
Johnson Controls Unitary Products 21
TH4B3621H TM8X100C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8X100C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8X120C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8X120C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8Y080C16MP11 21.0 CF/CM/CU48C 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8Y080C16MP11 21.0 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8Y100C16MP11 21.0 CF/CM/CU48C 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8Y100C16MP11 21.0 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TM8Y100C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8Y100C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8Y120C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM8Y120C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM9E080C16MP11 21.0 CF/CM/CU48C 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9E080C16MP11 21.0 CF/CM/CU48D 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9E100C16MP11 21.0 CF/CM/CU48C 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9E100C16MP11 21.0 CF/CM/CU48D 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9E100C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM9E100C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM9E120D20MP11 24.5 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.5 8.50 3.62 2.60 34.5 26.8
TH4B3621H TM9V080C16MP11 21.0 CF/CM/CU48D 1150 34.2 24.2 15.25 12.50 33.4 19.5 8.50 3.66 2.62 34.6 27.1
TH4B3621H TM9V100C16MP11 21.0 CF/CM/CU48D 1150 34.2 24.2 15.25 12.50 33.4 19.5 8.50 3.66 2.62 34.6 27.1
TH4B3621H TM9V100C20MP11 21.0 CF/CM/CU48C 1200 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.60 2.56 34.2 26.3
TH4B3621H TM9V100C20MP11 21.0 CF/CM/CU48D 1250 34.4 25.2 15.00 12.50 34.0 19.8 8.50 3.66 2.58 34.4 27.0
TH4B3621H TM9V120D20MP11 24.5 CF/CM/CU48D 1250 34.4 25.2 15.00 12.50 33.8 19.7 8.50 3.68 2.60 34.4 27.0
TH4B3621H TM9Y080C16MP11 21.0 CF/CM/CU48C 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9Y080C16MP11 21.0 CF/CM/CU48D 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9Y100C16MP11 21.0 CF/CM/CU48C 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9Y100C16MP11 21.0 CF/CM/CU48D 1175 34.0 24.0 14.75 12.25 33.6 19.7 8.50 3.58 2.56 34.3 26.6
TH4B3621H TM9Y100C20MP11 21.0 CF/CM/CU48C 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM9Y100C20MP11 21.0 CF/CM/CU48D 1175 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.60 2.58 34.3 26.8
TH4B3621H TM9Y120D20MP11 24.5 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.5 8.50 3.62 2.60 34.5 26.8
TH4B3621H TMLV080C16MP11 21.0 CF/CM/CU48C 1150 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.60 34.6 27.1
TH4B3621H TMLV100C16MP11 21.0 CF/CM/CU48C 1150 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.60 34.6 27.1
TH4B3621H TMLV100C20MP11 21.0 CF/CM/CU48D 1225 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.62 2.58 34.1 26.2
TH4B3621H TMLV120C20MP11 21.0 CF/CM/CU48D 1225 34.0 24.2 14.75 12.25 33.6 19.6 8.50 3.62 2.58 34.1 26.2
TH4B3621H TMLX080C16MP11 21.0 CF/CM/CU48C 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
TH4B3621H TMLX080C16MP11 21.0 CF/CM/CU48D 1175 34.2 24.2 15.00 12.50 33.6 19.6 8.50 3.62 2.58 34.5 26.8
For Notes See Page 29.
SYSTEM CAPACITY - With High Efficiency Motor Furnaces
1
UNIT
MODEL
FURNACE
COIL
MODEL
COOLING HEATING TVA COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
NET MBH
HSPF
COP NET MBH
TOTAL SENS. 47°F OD 17°F OD 47°F OD 17°F OD TOTAL SENS.
Loading...