Coleman Tent X8 User Manual

Set-up Instructions for the

NorthStar

X8 Tent

Before you begin

Read all instructions before set up.

• Select a level campsite clear of rocks, branches, and other hard or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

• Do not set up your tent under trees.

• For best results in windy conditions, position end of tent into the wind.

• Enlist the help of at least one other person to assist you when it is time to assemble the tent.

The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

MADE IN CHINA • PRINTED IN CHINA

Coleman

, , and exponent®are registered trademarks

and NorthStar

is a trademarkof The Coleman Company, Inc.

Rev 01/08

Warranty

Coleman®Exponent®Limited Lifetime Warranty

The Coleman Company, Inc. warrants to the original retail purchaser that this Coleman

Exponent®product will be free from defects in material and workmanship for the lifetime of the product. Coleman will repair or replace this product or any component of the product found to be defective, at our discretion. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.

The warranty is valid for the original retail purchaser and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty

performance. Coleman dealers, service centers or retail stores selling Coleman

Exponent®products do not have the right to alter, modify or in any way change the

terms and conditions of this warranty.

What This Warranty Does Not Cover

This warranty does not cover normal wear and tear of parts, parts that are not genuine Coleman

part, or damage caused by negligent use or misuse of the product; commercial use of the product; use contrary to the operating instructions; disassembly, repair or alteration by anyone other than Coleman or an authorized service center; or the natural breakdown of materials and colors over extended time and use. Further, the warranty does not cover Act of God, such as fire, flood, hurricanes or tornadoes.

COLEMAN SHALL NOT BE LIABLE FOR DEFECTS THAT ARE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR SERVICE. COLEMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITIONS. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THE ABOVE WARRANTY OR CONDITIONS. SOME STATES, PROVINCES, OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

How to Obtain Warranty Service

Take the product to an authorized Coleman service center. You can find the nearest authorized Coleman service center by visiting www.coleman.com or calling 1-800-835-3278 or TDD 316-832-8707 in the United States or 1 800 387-6161 in Canada. If a service center is not conveniently located, attach to the product a tag that includes your name, address, daytime telephone number and description of the problem. Include a copy of the original sales receipt. Carefully package the product and send either by courier or insured mail with shipping and insurance prepaid to:

For products purchased in the United States:

The Coleman Company, Inc. 3600 North Hydraulic Wichita, KS 67219

For products purchased in Canada:

Sunbeam Corporation (Canada) Limited DBA Jarden Consumer Solutions 20B Hereford Street Brampton, ON L6Y 0M1

The costs of transporting the product to Coleman or an authorized service center for warranty service is the responsibility of the purchaser.

DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.

If you have any questions regarding this warranty please call 1-800-835-3278 or TDD 316-832-8707 in the United States or 1 800 387-6161 in Canada.

Awning Poles (2)

Rainfly Poles Tent

Parts and Components

Description Part Number

Center Support Pole (1) 5010000278

Gold Leg Poles (4) 5010000279

Chrome Leg Poles (4) 5010000281

Awning Poles (2) 5010000280

Rainfly (1) 5010000283

Tent Body (1) 5010000282

Stakes (30) 5010000248

Carry Case 5010000284

Center Support Pole (1)

Chrome Leg

Poles (4)

Gold Leg Poles (4)

Remove items from compartments of the carry case and check to make sure all components are present before assembling your tent.

FIG. 1

FIG. 2

Left Side of Tent

Window

Front Door

To Set Up Tent

1. Assemble Center Support Pole, four Chrome Leg Poles, four Gold Leg Poles, and the two Awning Poles. (Fig. 1)

2. Unfold tent and spread out on a clean, level surface with the Front Living Area Door facing the desired direction (Fig. 2). NOTE: Back Bedroom has a window on the left side of tent.

2 7

Things You Should Know:

• Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside of your tent.

Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside the tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by removing wet clothing from your tent and by providing good ventilation through the tent.

• Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack

stakes or poles inside your tent. Use a separate storage bag.

• STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE TENT TO REMOVE STAKE.

• TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE.

• Do not leave your tent set-up for weeks at a time. Be aware that exposure to ultraviolet rays from the sun can seriously

damage material and/or cause it to become discolored.

WARNING: Keep all flame and heat sources away from this tent fabric.

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

To Store

1. All metal poles and stakes must be placed in the center compartment of carry case to prevent damage to the fabric

items. Neatly fold and store the Tent and Rainfly in the side compartments of the carry case.

2. Make sure Tent and Rainfly are clean and dry before placing in carry case.

3. Unzip doors before taking tent down for storage.

4. Store in a clean, dry area.

Back Bedroom Area

Front Living Area

Right Side of Tent

+ 2 hidden pages