COLEMAN Tent Northstar X4 User Manual [fr]

Set-up Instructions for the

NorthStar

X4 Tent

Awning Poles (2)

Rainfly Poles Tent

Parts and Components

Description Part Number

Center Support Pole (1) 5010000256

Gold Leg Poles (4) 5010000255

Chrome Leg Poles (4) 5010000257

Awning Poles (2) 5010000258

Rainfly (1) 5010000259

Tent Body (1) 5010000247

Stakes (30) 5010000248

Carry Case 5010000249

Center Support Pole (1)

Chrome Leg

Poles (4)

Gold Leg Poles (4)

Remove items from compartments of the carry case and check to make sure all components are present before assembling your tent.

FIG. 1

FIG. 2

Left Side of Tent

Window

Front Door

To Set Up Tent

1. Assemble Center Support Pole, four Chrome Leg Poles, four Gold Leg Poles, and the two Awning Poles. (Fig. 1)

2. Unfold tent and spread out on a clean, level surface with the Front Living Area Door facing the desired direction (Fig. 2). NOTE: Back Bedroom has a window on the left side of tent.

Back Bedroom Area

Front Living Area

Right Side of Tent

Detail A

Detail B

FIG. 3

Gold Leg

Poles

Chrome

Leg

Poles

Gold Leg

Poles

Center

Support Pole

3. Insert curved end of Gold Leg Poles into gold-colored fittings on Center Support Pole; then insert curved end of

Chrome Center Poles into chrome-colored fittings on Center Support Pole. (Fig. 3)

4. Insert bottom end of the four Gold Leg Poles into grommets on corner web straps (Detail A); then insert bottom

end of the four Chrome Center Poles into grommets on center front & back web straps (Detail B).

5. Snap both center hooks on top of tent onto middle section of the Center Support Pole. (Fig. 4 & 5) NOTE: Unzipping Bedroom Door Panel and Living Area Door Panel will allow easier access to attaching the

center hooks of the tent to the Center Support Post.

FIG. 4

FIG. 5

Bedroom

Door

Panel

Living Area Door Panel

+ 5 hidden pages