Coleman Power Steel 90387E Owner's Manual
DO NOT RETURN THIS ITEM TO THE STORE
OR WEBSITE WHERE IT WAS PURCHASED.
CONTACT US DIRECTLY WITH ANY QUESTIONS,
OR FOR DEFECTIVE OR WARRANTY CLAIMS.
CALL US DIRECTLY FOR IMMEDIATE HELP!
Toll-Free: 1-855-838-3888
Website: www.bestwaycorp.com
THIS PRODUCT IS COMPLIANT TO ANSI/ APSP 4 AMERICAN NATIONAL STANDARD FOR
ABOVEGROUND POOLS / ONGROUND RESIDENTIAL SWIMMING POOLS & INTERNATIONAL SWIMMING
POOL & SPA CODE ( ISPSC)
#90387E
Power Steel
TM
Pools
Owner’s Manual
S-S-005766
3
S-S-005766
Put 1 to 2 in. of water in the pool to cover the floor. Once pool floor is slightly covered, gently
smooth out all wrinkles. Start in the center of the pool and work your way clockwise to the
outside.
WARNING
smooth out the bottom
The pool must be set up on a completely flat and level surface. Please do not install the pool if the
surface is inclined or sloped. Failure to do so may result in the product collapsing which may
cause serious injury.
No sitting or standing on the top rails.
S-S-005766
4
Loading...