Coleman PMD8129 Model, PMD8129 Series Owner's Manual

©2006 The Coleman Company, Inc. All rights reserved.

COLEMAN® and are registered trademarks of The Coleman Company, Inc., used under license. Designed in the USA and
custom-manufactured in China for Team Products International Inc. Distributed by Team Products International Inc., Mountain Lakes, NJ 07046.

Owner’s Manual

PMD8129 Models

18V
Cordless Drill

PMD8129033106-166

TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty

WHAT IS COVERED: Any defect in materials and workmanship.
FOR HOW LONG: 2 years from date of purchase.
WHAT WE WILL DO: If your product is defective and returned within 30 days

after the date it was purchased, we will replace it at no charge to you. If
returned after 30 days but within 2 years of the date of purchase we will
repair it or, at our option, replace it at no charge to you.

If we repair your product, we may use new or reconditioned replacement
parts. If we choose to replace your product, we may replace it with a
new or reconditioned one of the same or similar design. The repair or
replacement will be warranted under our standard 2 year warranty.

LIMITATIONS: IMPLIED WARRANTIES, INCLUDING THOSE OF FITNESS FOR A
PARTICULAR PURPOSE AND MERCHANTABILITY (AN UNWRITTEN WARRANTY
THAT THE PRODUCT IS FIT FOR ORDINARY USE), ARE LIMITED TO 2 YEARS
FROM DATE OF PURCHASE. WE WILL NOT PAY FOR LOSS OF TIME, INCONVE

­NIENCE, LOSS OF USE OF YOUR PRODUCT OR PROPERTY DAMAGE CAUSED
BY YOUR PRODUCT OR ITS FAILURE TO WORK, OR ANY OTHER INCIDENTAL
OR CONSEQUENTIAL DAMAGES INCLUDING PERSONAL INJURY.

Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages,
so the above exclusions or limitations may not apply to you.

WHAT WE ASK YOU TO DO: To get warranty service for your product,
you must provide proof of the date of purchase. Within 30 days of the
date it was purchased, return your product to your place of purchase for
immediate replacement. After 30 days, but before the end of the 2 year
warranty period, you may return the product to the following address:

TEAM PRODUCTS INTERNATIONAL INC.

Attn: Customer Service Returns
35 A Continental Drive
Wayne, NJ 07470

We suggest that you retain your original packing material in the event
you need to ship your product. When sending your product include your
name, address, phone number, proof of date of purchase, and a
description of the operating problem. After repairing or replacing your
product, we will ship it to your home or office within four weeks.

WHAT THIS WARRANTY DOES NOT COVER: AMONG OTHER THINGS THIS
WARRANTY DOES NOT COVER DEFECTS RESULTING FROM ACCIDENTS,
DAMAGE WHILE IN TRANSIT TO OUR SERVICE LOCATION, ALTERATIONS,
UNAUTHORIZED REPAIR, FAILURE TO FOLLOW INSTRUCTIONS, MISUSE, FIRE,
FLOOD, AND ACTS OF GOD. IF YOUR PRODUCT IS NOT COVERED BY OUR
WARRANTY, CALL OUR CUSTOMER SERVICE NUMBER AT [phone] TO
DETERMINE WHETHER WE WILL REPAIR YOUR PRODUCT AND OTHER REPAIR
INFORMATION, INCLUDING CHARGES. WE, AT OUR OPTION, MAY REPLACE
RATHER THAN REPAIR YOUR PRODUCT WITH A NEW OR RECONDITIONED
ONE OF THE SAME OR SIMILAR DESIGN. THE REPAIR OR REPLACEMENT WILL
BE WARRANTED FOR 2 YEARS.

THIS LIMITED WARRANTY IS THE ONLY ONE WE GIVE ON YOUR PRODUCT,
AND IT SETS FORTH ALL OUR RESPONSIBILITIES REGARDING YOUR PRODUCT.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION SET
FORTH ABOVE.

STATE LAW RIGHTS: This warranty gives you specific legal rights and you
may also have other rights which may vary from state to state.

PMD8129 Models

Owner’s Manual

PMD8129 Models

Owner’s Manual

Welcome

This COLEMAN® product has been carefully engineered and manufactured to
give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.

GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS

WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below, may result in electric shock, fire
and/or serious personal injury.

SAVE THESE INSTRUCTIONS.

Work Area

1. Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in

the presence of flammable liquids, gases, or dust. Power tools create

sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a

power tool. Distractions can cause you to lose control.

Electrical Safety

1. Do not abuse the cord. Never use the cord to carry the tool. Keep
cord away from heat, oil, sharp edges, or moving parts. Replace
damaged cords immediately. Damaged cords may create a fire.

Applies only to tools with a separable battery pack.

2. A battery operated tool with integral batteries or a separate bat­tery pack must be recharged only with the specified charger for the
battery. A charger that may be suitable for one type of battery may create a

risk of fire when used with another battery.

3. Use battery operated tool only with specifically designated battery
pack. Use of any other batteries may create a risk of fire.

Personal Safety

1. Stay alert, watch what you are doing, and use common sense when
operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention

while operating power tools may result in serious personal injury.

2. Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught in moving parts.

3. Avoid accidental starting. Be sure switch is in the locked or off
position before inserting battery pack. Carrying tools with your finger

on the switch or inserting the battery pack into a tool with the switch on
invites accidents.

4. Remove adjusting keys or wrenches before turning the tool on. A
wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.

5. Do not overreach. Keep proper footing and balance at all times.

Proper footing and balance enable better control of the tool in unexpected
situations.

6. Use safety equipment. Always wear eye protection. Dust mask,
non-skid safety shoes, hard hat, or hearing protection must be used for
appropriate conditions.

Tool Use and Care

1. Use clamps or other practical way to secure and support the work
piece to a stable platform. Holding the work by hand or against your

body is unstable and may lead to loss of control.

2. Do not force tool. Use the correct tool for your application. The
correct tool will do the job better and safer at the rate for which it is
designed.

3. Do not use tool if switch does not turn it on or off. A tool that cannot
be controlled with the switch is dangerous and must be repaired.

4. Disconnect battery pack from tool or place the switch in the locked

or off position before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

5. Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.

6. When battery pack is not in use, keep it away from other metal

objects like: paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause sparks, burns,

or a fire.

1 2