Coleman Pebble Creek 20’x11’, 9272-210C Instructions Manual

Connect Frame to Tent

– Insert one pin into the end of main black tent

pole to the side of the door. (illus. 3), (illus. 4)

– Go to opposite end of pole and gradually

apply pressure to the pole forming an arch
until you are able to insert the pin into the

pole end.
– Repeat for second pole.
– Insert remaining pin into the end of side pole,

go to opposite end of pole and apply

pressure until you arch the pole and can

insert the pin into the pole. (illus. 3), (illus. 4)
– Repeat for other side pole.

Pebble Creek™20’x11’

1

Layout & Positioning
of Tent, Pole Assembly

– Layout and position tent with doors

facing desired direction. (illus. 1)
– Unzip doors.
– Stake down tent corners, using the stake

loops. Keep the floor taut. (illus. 2)
– Stake down tent through the rings on the pin

and ring system.
– Assemble frame poles by interlocking shock-

corded poles. (four poles)
– Insert the poles into pole sleeves. The longer

black poles should cross forming an “X” in

the middle of tent. The shorter side grey

poles insert into sleeves running front to

back. The shorter black center pole runs

straight front to back. (illus. 1)

2

When You Are Ready
To Set Up Your Tent

– Select a level campsite clear of

rocks, branches and other hard

or sharp objects.
– Do not set up your tent under trees.
– For best results in windy conditions,

position the end of tent into the wind.

(2) Rainfly Poles

Side poles

(Grey)

Short Center

Pole (Black)

Assembled poles inserted
through pole sleeves

Instructions apply to Part Number 9272-210C

illus. 1

illus. 2

Tent stake

through ring

on stake loop

illus. 4

Tent frame

set-up

Part No. 9272-321

Part No. 9272-323

Part No. 9272-325

Part No. 9272-315

illus. 3

Insert pin into pole end

Rainfly

(2) Main T

ent Poles

(Black)

(2) Side Poles (Grey)

Part No. 9272-319

Part No. 9272-317

(1) Center Pole

(Black)

(2) Upright Poles

(Black)

POLE ASSEMBLY PARTS