Coleman HC6B024 THRU 060, HC6B024F3(C), HC6B060F3(C), HC6B030F3(C), HC6B036F3(C) Technical Manual

...

Download

TECHNICAL GUIDE

ECHELONTM SERIES SPLIT-SYSTEM HEAT PUMPS 16 SEER – R-410A – 1 PHASE 2 THRU 5 NOMINAL TONS

MODELS: HC6B024 THRU 060

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.colemanac.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY*

Extended 10-Years limited parts warranty. Extended Lifetime limited compressor warranty.

Extended parts and compressor warranties require online registration within 90 days of purchase for replacement or closing for new home construction.

* Does not apply to R-22 models, 3-Phase models, or internet sales. See Limited Warranty certificate in User's Information Manual for details.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

632152-CTG-E-0812

DESCRIPTION

The 16 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.

FEATURES

• Superior Coil Protection - A stamped, decorative metal coil guard protects the tube-in-fin coil from debris and other damaging material.

• Protected Compressor - The compressor is safeguarded against abnormal pressures and temperatures by an internal pressure relief valve, an internal temperature sensor, and factory high and low pressure system controls. A factory installed liquid line filter-drier further protects the compressor against moisture and debris.

• Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.

• Durable Finish - An automotive quality finish provides the ultimate protection from harmful UV rays and rust creep, ensuring a long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional powder-coat finishes.

• Hot Heat Pump - An optional mode that slows the indoor fan for higher register air temperatures and premium comfort.

• WhisperDrive™ System - Features combination of sweptwing fan, composite base pan, isolated compressor compartment, and single-stage compressor to reduce overall sound to a mere whisper. The 5-ton system utilizes a two-stage compressor.

• Low RPM Fan Motor - Helps to reduce airflow noise.

• Swept Wing Fan - A fan design boasting technology adapted from aeronautic and defense engineering provides for whisperquiet operation by allowing air to flow smoothly and efficiently across the fan tips.

• Composite Base Pan - The strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration.

• Isolated Compressor Compartment - A molded composite bulkhead isolates the refrigeration components and the compressor from the rest of the unit, reducing sound and vibration.

• Lower Installed Cost - Designed to provide enhanced installability by featuring a slide-down control compartment that allows easy access to control components, along with angled service valves to reduce overall installation time and cost. Factory charged for a 15 foot lineset.

• Factory Installed Filter-Drier - A factory installed, solid core liquid line filter-drier removes harmful debris and moisture from the system.

• Easy Service Access - A full end, full service access panel with handle makes for easy entry to internal components.

• Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.

• Complete System Control - These heat pumps utilize a unique microprocessor defrost control system to provide optimal comfort as well as monitor the overall system for reliable operation. In the event improper operating conditions occur (high temperature and/or high pressure), the system will automatically shut the system down to extend the life of the heat pump. The defrost control features an internal memory to aid the technician in troubleshooting, reducing service time and cost.

• Premium System Warranty* - Limited lifetime compressor warranty when registered online within 90 days of installation.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.

632152-CTG-E-0812

VAPOR

LIQUID

2-3/8

3-1/8

6-1/2

Physical and Electrical Data

Model HC6B024F3(C) HC6B030F3(C) HC6B036F3(C) HC6B042F4(C) HC6B048F3(C) HC6B060F3(C)

Unit Supply Voltage 208-230V, 1 60Hz Normal Voltage Range Minimum Circuit Ampacity 17.5 17.3 22.6 23.7 26.9 33.8 Max. Overcurrent Device Amps Min. Overcurrent Device Amps Compressor Type Scroll Scroll Scroll Scroll Scroll 2-Stage Scroll

Compressor Amps Crankcase Heater No No No No No No

Factory External Discharge Muffler Yes Yes Yes Yes Yes Yes Factory External Check Valve NoNoNoNoNoNo HS Kit Required with TXV Fan Motor Amps Rated Load 0.7 1.3 1.3 1.3 1.3 1.3 Fan Diameter Inches 24 24 24 24 24 24

Fan Motor

Coil

Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 7/8 7/8 1-1/8 Unit Charge (Lbs. - Oz.) Charge Per Foot, Oz. 0.68 0.68 0.68 0.70 0.70 0.76 Operating Weight Lbs. 199 228 230 237 283 298

1. Rated in accordance with AHRI Standa rd 110-2012, utilization range “A”.

2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4. See Hard Start Kit Accessory Installation Manual for Hard St art Kit part number for each model.

5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing leng ths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

30 30 35 40 45 50 20 20 25 25 30 35

187 to 252

Rated Load 13.4 12.8 17 17.9 20.5 26 Locked Rotor 58.3 64 77 112 115 118

No No No No No No

Rated HP 1/8 1/4 1/4 1/4 1/4 1/4 Nominal RPM 1075 850 850 850 850 850 Nominal CFM 2750 3800 3800 3800 3400 3700 Face Area Sq. Ft. 20.6 23.6 23.6 23.6 23.6 23.6 Rows Deep111122 Fins / Inch 22 22 22 22 22 14

9 - 3 9 - 13 10 - 10 11 - 7 14 - 5 14 - 11

Unit

Model

Dimensions

(Inches)

A B C Liquid Vapor

Refrigerant Connection

Service Valve Size

024 40 37 31

3/4030 40 42-1/4 34 036 40 42-1/4 34 042 40 42-1/4 34 048 40 42-1/4 34

3/8

7/8 060 40 42-1/4 34 7/8*

* Adapter fitting required for 1-1/8” line set. Overall height is from bottom of base pan to top of fan guard.

Overall length and width include screw heads.

2 Johnson Controls Unitary Products

632152-CTG-E-0812

System Charge for Various Matched Systems

Outdoor Unit HC6B024F3(C) HC6B030F3(C) HC6B036F3(C) HC6B042F4(C) HC6B048F3(C) HC6B060F3(C) Required TXV

1,2

4N1 4H1 4H1 4J1 4J1 4K1

Indoor Unit

3,4,5

Additional Charge, Oz

AHE24B TXV + 0 – – – – – AHE30B TXV + 0 – – – – – AHE36C – TXV + 0 – – – – AHE42D – – TXV + 0 – – – AHE48D – – TXV + 20 TXV + 0 – – AHE60D – – – TXV + 5 TXV + 0 TXV + 0 AHR24B TXV + 0 – – – – – AHR36B – TXV + 0 – – – – AHR42C – – TXV + 0 – – – AHR60D – – – TXV + 0 TXV + 0 – AHV24B TXV + 0 – – – – – AHV30B TXV + 0 – – – – – AHV36C TXV + 12 TXV + 0 – – – – AHV42D – – TXV + 0 – – – AHV48D – – TXV + 20 TXV + 0 – – AHV60D – – – TXV + 5 TXV + 0 TXV + 0 AV*36 TXV + 12 TXV + 0 – – – – AV*48 – – TXV + 20 TXV + 0 – – FC/MC/PC32 TXV + 0 – – – – – FC/MC/PC35 TXV + 0 – – – – – FC/MC/PC37 TXV + 12 TXV + 0 – – – – FC/MC/PC43 TXV + 12 TXV + 0 – – – – FC/MC/PC48 – – TXV + 0 – – – FC/MC/PC60 – – TXV + 20 TXV + 0 – – FC/PC62 – – – TXV + 5 TXV + 0 TXV + 0 FC64 – – – – TXV + 8 TXV + 8 UC48 – – TXV + 15 – – – UC60 – – TXV + 31 TXV + 2 – – Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil

only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.

FOOTNOTES:

1. For applications requiring a TXV use S1-1TVM*** series kit.

2. A TXV kit must be used with these indoor units to obtain system performance.

3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.

4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.

5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.

Note: If a TXV is factory installed on the coil, it must be replaced with the listed TXV.

PROCEDURES:

1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.

2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above t able.

3. Add additional charge for the amount of interconnecting line tubi ng greater than 15 feet at the rate specified in Physical and Electrical Data Table.

4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.

5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for line set.

Johnson Controls Unitary Products 3

632152-CTG-E-0812

COOLING CAPACITY - With Air Handler Coils

UNIT MODEL

HC6B024F3(C)

HC6B030F3(C)

HC6B036F3(C)

HC6B042F4(C)

HC6B048F3(C)

For notes, see Page 5.

AIR HANDLER

MODEL WIDTH STAGE

AHE24B 17.5 – – 795 23.8 18.0 15.00 12.50 AHE30B 17.5 – – 795 23.8 18.0 15.00 12.50 AHR24B 17.5 – - 740 23.2 16.8 13.35 11.50 AHV24B 17.5 – - 710 22.8 16.7 15.0 12.50 AHV30B 17.5 – - 775 23.0 17.3 15.0 12.50 AHV36C 21.0 – - 760 23.8 17.6 16.0 13.00

AV*36 21.0 – – 725 23.8 17.4 16.00 13.00 MV12B 17.5 FC/MC35B – 800 23.6 17.8 15.00 12.50 MV12B 17.5 FC/MC43B – 800 24.0 18.6 16.00 13.00 MX12B 17.5 FC/MC35B – 815 24.0 18.2 15.00 12.50 MX12B 17.5 FC/MC43B – 735 23.8 17.6 15.00 12.50

AHE36C 21.0 – – 1000 29.0 22.0 16.00 13.00 AHR36B 17.5 – - 1060 28.4 21.8 13.35 11.50 AHV36C 21.0 – 895 28.2 20.0 15.00 12.50

AV*36 21.0 – – 895 28.2 26.2 15.75 13.00 MV12B 17.5 FC/MC43B – 1000 28.8 21.8 16.00 13.00 MV16C 21.0 FC/MC43C – 1000 28.8 22.0 16.00 13.00 MX12B 17.5 FC/MC43B – 1095 29.2 23.0 16.00 13.00 MX16C 21.5 FC/MC43B – 970 28.0 21.8 15.00 12.50

AHE42D 21.0 – – 1180 34.8 26.0 15.00 12.50 AHE48D 24.5 – – 1195 35.4 26.6 15.00 12.50 AHR42C 21.0 – - 1230 34.6 28.2 13.35 11.50 AHV42D 24.5 – – 1180 35.4 27.0 15.00 12.50 AHV48D 24.5 – – 1155 35.2 26.6 15.00 12.50

AV*48 24.5 – – 1220 35.2 26.6 15.00 12.50 MV12D 24.5 FC/MC48D – 1160 34.8 26.0 15.00 12.50 MV12D 24.5 FC/MC60D – 1135 34.6 25.6 15.00 12.50 MV16C 21.0 FC/MC48C – 1200 34.6 25.8 15.00 12.50 MX12D 24.5 FC/MC48D – 1225 35.2 26.6 15.00 12.50 MX12D 24.5 FC/MC60D – 1275 35.2 27.0 15.00 12.50 MX16C 21.0 FC/MC48C – 1150 35.0 25.8 15.00 12.50

AHE48D 24.5 - – 1200 39.5 28.0 15.00 12.50 AHE60D 24.5 - – 1385 40.0 29.2 15.00 12.50 AHR60D 24.5 - – 1350 39.0 28.2 13.25 11.35 AHV48D 24.5 - – 1155 39.5 27.6 15.00 12.50 AHV60D 24.5 - – 1340 39.5 28.6 14.50 12.00

AV*48 24.5 - – 1220 40.0 28.8 15.00 12.50 MV16C 21.0 FC60C – 1200 39.5 28.2 15.00 12.50 MV20D 24.5 FC/MC60D – 1300 40.0 29.4 15.00 12.50 MV20D 24.5 FC/MC62D – 1400 40.0 28.6 14.50 12.00 MX16C 21.0 FC60C – 1150 39.5 28.4 15.00 12.50 MX20D 24.5 FC/MC60D – 1295 40.5 29.6 15.00 12.50 MX20D 24.5 FC/MC62D – 1470 40.5 30.2 15.00 12.50

AHE60D 24.5 – – 1565 46.5 34.8 15.00 12.50 AHR60D 24.5 – - 1620 46.0 42.5 13.35 11.50 AHV60D 24.5 – – 1570 46.5 34.6 15.00 12.50

MV20D 24.5 FC/MC62D – 1630 46.5 34.8 15.00 12.50 MV20D 24.5 FC64 – 1630 48.0 36.8 15.00 12.50 MX20D 24.5 FC/MC62D – 1605 47.0 35.4 15.00 12.50 MX20D 24.5 FC64 – 1605 48.0 36.8 15.00 12.50

COIL

MODEL

16 SEER HP WITH AIR HANDLERS

RATED

CFM

COOLING NET MBH

TOTAL SENS.

SEER EER

4 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT MODEL

AIR HANDLER

MODEL WIDTH STAGE

COIL

MODEL

RATED

CFM

16 SEER HP WITH AIR HANDLERS

AHE60D 24.5 –

AHV60D 24.5 –

MV20D 24.5 FC/MC62D

HC6B060F3(C)

MV20D 24.5 FC64

MX20D 24.5 FC/MC62D

MX20D 24.5 FC64

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at thos e conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electr ic power input in watt-hours during the same period.

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. — = Not applicable.

MA Modular Air Handlers use Coil Only Ratings.

1 1160 47.0 30.4 2 1835 56.5 40.5 1 1090 45.5 30.2 2 1635 54.5 39.0 11.65 1 1075 46.5 29.8 2 1630 56.0 39.0 11.80 1 1075 48.0 31.2 2 1630 57.5 40.5 12.00 1 1390 49.0 33.0 2 1795 56.5 40.5 1 1390 50.5 34.4 2 1795 58.5 42.0

COOLING NET MBH

TOTAL SENS.

SEER EER

15.00 11.60

15.35

15.00

15.00 11.85

15.00 12.15

20.65

20.80

21.60

COOLING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings)

UNIT

MODEL

MODEL WIDTH

COIL

CFM RANGE

(MIN.-MAX.)

STAGE

16 SEER HP COIL ONLY RATINGS

FC/MC/PC32 14.5 600 - 1000 – 800 23.2 17.2 13.35 11.50

HC6B024F3(C)

FC/MC/PC35 17.5,21.0 600 - 1000 – 800 23.2 17.2 13.35 11.50 FC/MC/PC37 14.5 600 - 1000 – 800 23.6 17.5 13.35 11.50 FC/MC/PC43 17.5,21.0 600 - 1000 – 800 23.6 17.5 13.35 11.50

HC6B030F3(C)

FC/MC/PC37 14.5 800 - 1200 – 1000 28.4 21.4 14.00 12.00 FC/MC/PC43 17.5,21.0 800 - 1200 – 1000 28.4 21.4 14.00 12.00 FC/MC/PC48 21.0,24.5 1000 - 1400 – 1200 34.4 25.6 13.35 11.50

HC6B036F3(C)

FC/MC/PC60 21.0,24.5 1000 - 1400 – 1200 34.0 25.4 13.35 11.50

UC48 21.0,24.5 1000 - 1400 – 1200 34.4 25.6 13.25 11.35 UC60 21.0,24.5 1000 - 1400 – 1200 34.0 25.2 13.25 11.35

FC/MC/PC60 21.0.0,24.5.5 1200 - 1600 – 1200 38.5 27.0 13.25 11.35

HC6B042F4(C)

FC/MC62 24.5.5 1200 - 1600 – 1400 39.0 28.0 13.00 11.00

UC60 21.0,24.5 1200 - 1600 – 1200 38.5 27.4 13.25 11.35

HC6B048F3(C)

HC6B060F3(C)

1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings.

PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FC/MC62 24.5 1400 - 1800 – 1600 46.0 34.4 13.35 11.50

FC64 24.5 1400 - 1800 – 1600 47.0 35.6 13.35 11.50

FC/MC62 24.5

FC64 24.5

1150 - 1550 1 1350 48.0 31.8 1600 - 2000 2 1800 55.5 39.5 1150 - 1550 1 1350 49.5 33.2 1600 - 2000 2 1800 57.5 41.5

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER

15.00 11.10

15.00 11.40

EER

Johnson Controls Unitary Products 5

632152-CTG-E-0812

COOLING CAP ACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

HC6B024F3(C)

HC6B030F3(C)

For notes, see Page 8.

FURNACE

MODEL WIDTH

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*A12 14.5 FC/MC/PC3 2A 755 23.4 17.3 15.00 12.50 T*(8,L)V*A12 14.5 FC/MC/PC3 7A 765 23.8 17.7 15.00 12.50 T*(8,L)V*B12 17.5 FC/MC/PC3 5B 785 23.6 17.6 15.00 12.50 T*(8,L)V*B12 17.5 FC/MC/PC4 3B 790 24.0 18.0 15.00 12.50 T*(8,L)V*C16 21.0 FC/MC/PC35C 775 23.6 17.6 15.00 12.50 T*(8,L)V*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00 T*(8,L)V*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50 T*(8,L)V*C20 21.0 FC/MC/PC43C 740 23.8 17.5 15.00 12.50 T*(8,L)X*A12 14.5 FC/MC/PC3 2A 800 23.8 17.9 15.00 12.50 T*(8,L)X*A12 14.5 FC/MC/PC3 7A 840 24.0 18.7 16.00 13.00 T*(8,L)X*B12 17.5 FC/MC/PC3 5B 850 24.0 18.2 15.00 12.50 T*(8,L)X*B12 17.5 FC/MC/PC4 3B 865 24.0 18.7 16.00 13.00 T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 18.2 15.00 12.50 T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 18.7 16.00 13.00 T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 18.1 15.00 12.50 T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 18.6 16.00 13.00 T*9(C,V)*B12 17.5 FC/MC/PC35B 815 23.8 18.0 15.00 12.50

T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 18.5 15.00 12.50 T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.8 15.00 12.50 T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00 T*9(C,V)*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50 T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00

T*9V*A10 14.5 FC/MC/PC32A 785 23.4 17.3 14.00 12.00 T*9V*A10 14.5 FC/MC/PC37A 790 23.6 17.7 14.00 12.00 T*9X*A10 14.5 FC/MC/PC32A 745 23.2 17.0 14.55 12.00 T*9X*A10 14.5 FC/MC/PC37A 740 23.4 17.2 14.75 12.00 T*9X*B12 17.5 FC/MC/PC35B 785 23.8 17.7 15.00 12.50 T*9X*B12 17.5 FC/MC/PC43B 800 24.0 18.7 16.00 13.00 T*9X*C16 21.0 FC/MC/PC35C 765 23.6 17.5 15.00 12.50 T*9X*C16 21.0 FC/MC/PC43C 785 24.0 18.0 16.00 13.00 T*9X*C20 21.0 FC/MC/PC35C 825 24.0 18.1 15.00 12.50

T*9X*C20 21.0 FC/MC/PC43C 790 24.0 18.1 16.00 13.00 C*(8,L)C*A12 14.5 FC/MC/PC32A 755 23.4 17.3 15.00 12.50 C*(8,L)C*A12 14.5 FC/MC/PC37A 765 23.8 17.7 15.00 12.50 C*(8,L)C*B12 17.5 FC/MC/PC35B 785 23.6 17.6 15.00 12.50 C*(8,L)C*B12 17.5 FC/MC/PC43B 790 24.0 18.0 15.00 12.50 C*(8,L)C*C16 21.0 FC/MC/PC35C 775 23.6 17.6 15.00 12.50 C*(8,L)C*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00 C*(8,L)C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50 C*(8,L)C*C20 21.0 FC/MC/PC43C 740 23.8 17.5 15.00 12.50

C*9C*B12 17.5 FC/MC/PC35B 815 23.8 18.0 15.00 12.50

C*9C*B12 17.5 FC/MC/PC43B 800 24.0 18.5 15.00 12.50

C*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.8 15.00 12.50 C*9C*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00 C*9C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50

C*9C*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00 T*(8,L)V*A12 14.5 FC/MC/PC3 7A 950 28.4 21.2 15.00 12.50 T*(8,L)V*B12 17.5 FC/MC/PC4 3B 1045 28.8 22.2 15.00 12.50

T*(8,L)V*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 15.00 12.50 T*(8,L)V*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 15.00 12.50

T*(8,L)X*A12 14.5 FC/MC/PC3 7A 1090 29.2 23.0 15.00 12.50 T*(8,L)X*B12 17.5 FC/MC/PC4 3B 1090 29.2 23.0 15.00 12.50

T*(8,L)X*C16 21.0 FC/MC/PC43C 955 28.8 21.6 15.00 12.50 T*(8,L)X*C20 21.0 FC/MC/PC43C 870 28.2 20.6 15.00 12.50 T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 15.00 12.50

COIL

MODEL

COOLING

RATED

CFM

NET MBH

TOTAL SENS.

SEER EER

6 Johnson Controls Unitary Products

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B030F3(C)

HC6B036F3(C)

HC6B042F4(C)

For notes, see Page 8.

FURNACE

MODEL WIDTH

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 15.00 12.50 T*9(C,V)*C20 21.0 FC/MC/PC43C 995 28.8 21.8 15.00 12.50

T*9X*B12 17.5 FC/MC/PC43B 1095 29.4 23.0 15.00 12.50

T*9X*C16 21.0 FC/MC/PC43C 1055 29.4 23.0 15.00 12.50 C*(8,L)C*A12 14.5 FC/MC/PC37A 950 28.4 21.2 15.00 12.50 C*(8,L)C*B12 17.5 FC/MC/PC43B 1045 28.8 22.2 15.00 12.50 C*(8,L)C*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 15.00 12.50 C*(8,L)C*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 15.00 12.50

C*9C*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 15.00 12.50

C*9C*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 15.00 12.50

C*9C*C20 21.0 FC/MC/PC43C 995 28.8 21.8 15.00 12.50 T*(8,L)V*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 15.00 12.50 T*(8,L)V*C16 21.0 FC/PC60C 1185 34.8 25.6 15.00 12.50 T*(8,L)V*C16 21.0 UC48C 1210 34.6 26.0 15.00 12.50 T*(8,L)V*C16 21.0 UC60C 1195 34.4 25.6 15.00 12.50 T*(8,L)V*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 15.00 12.50 T*(8,L)V*C20 21.0 FC/PC60C 1215 35.0 26.4 15.00 12.50 T*(8,L)V*C20 21.0 UC48C 1155 34.6 26.0 15.00 12.50 T*(8,L)V*C20 21.0 UC60C 1215 34.4 25.6 15.00 12.50 T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 34.8 26.0 15.00 12.50 T*(8,L)X*C16 21.0 FC/PC60C 1190 34.8 25.8 15.00 12.50 T*(8,L)X*C16 21.0 UC48C 1185 34.8 26.2 15.00 12.50 T*(8,L)X*C16 21.0 UC60C 1190 34.6 25.8 15.00 12.50 T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 35.4 27.0 15.00 12.50 T*(8,L)X*C20 21.0 FC/PC60C 1275 35.4 27.2 15.00 12.50 T*(8,L)X*C20 21.0 UC48C 1270 35.0 26.8 15.00 12.50 T*(8,L)X*C20 21.0 UC60C 1275 34.8 26.6 15.00 12.50

T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 15.00 12.50 T*9(C,V)*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 15.00 12.50

T*9X*C16 21.0 FC/MC/PC48C 1280 35.2 27.0 15.00 12.50 T*9X*C16 21.0 FC/PC60C 1315 35.4 27.4 15.00 12.50 T*9X*C16 21.0 UC48C 1280 34.8 26.8 15.00 12.50 T*9X*C16 21.0 UC60C 1300 34.8 26.8 15.00 12.50 T*9X*C20 21.0 FC/MC/PC48C 1205 34.6 25.8 15.00 12.50 T*9X*C20 21.0 FC/PC60C 1240 35.2 26.8 15.00 12.50 T*9X*C20 21.0 UC48C 1205 34.6 26.0 15.00 12.50 T*9X*C20 21.0 UC60C 1240 34.4 25.6 15.00 12.50 T*9X*D20 24.5 FC/MC/PC48D 1240 35.2 26.8 15.00 12.50 T*9X*D20 24.5 FC/MC/PC60D 1310 35.6 27.6 15.00 12.50 T*9X*D20 24.5 UC48D 1240 34.6 26.0 15.00 12.50

T*9X*D20 24.5 UC60D 1310 35.0 27.0 15.00 12.50 C*(8,L)C*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 15.00 12.50 C*(8,L)C*C16 21.0 FC/PC60C 1185 34.8 25.6 15.00 12.50 C*(8,L)C*C16 21.0 UC48C 1210 34.6 26.0 15.00 12.50 C*(8,L)C*C16 21.0 UC60C 1195 34.4 25.6 15.00 12.50 C*(8,L)C*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 15.00 12.50 C*(8,L)C*C20 21.0 FC/PC60C 1215 35.0 26.4 15.00 12.50 C*(8,L)C*C20 21.0 UC48C 1155 34.6 26.0 15.00 12.50 C*(8,L)C*C20 21.0 UC60C 1215 34.4 25.6 15.00 12.50

C*9C*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 15.00 12.50

C*9C*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 15.00 12.50 T*(8,L)V*C16 21.0 FC/MC62D 1420 40.0 29.2 14.50 12.00 T*(8,L)V*C16 21.0 FC/PC60C 1185 39.0 27.6 15.00 12.50 T*(8,L)V*C16 21.0 UC60C 1195 39.0 27.8 15.00 12.50 T*(8,L)V*C20 21.0 FC/MC62D 1365 39.5 28.4 14.50 12.00 T*(8,L)V*C20 21.0 FC/PC60C 1215 39.5 28.4 15.00 12.50

COIL

MODEL

RATED

CFM

COOLING

NET MBH

TOTAL SENS.

632152-CTG-E-0812

SEER EER

Johnson Controls Unitary Products 7

632152-CTG-E-0812

COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B042F4(C)

HC6B048F3(C)

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FURNACE

MODEL WIDTH

COIL

MODEL

RATED

CFM

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*C20 21.0 UC60C 1215 39.0 27.8 15.00 12.50 T*(8,L)X*C16 21.0 FC/MC62D 1360 40.0 28.6 15.00 12.50 T*(8,L)X*C16 21.0 FC/PC60C 1190 39.5 27.6 15.00 12.50 T*(8,L)X*C16 21.0 UC60C 1190 39.5 28.0 15.00 12.50 T*(8,L)X*C20 21.0 FC/MC62D 1485 40.5 30.2 15.00 12.50 T*(8,L)X*C20 21.0 FC/PC60C 1275 40.0 29.2 15.00 12.50

T*(8,L)X*C20 21.0 UC60C 1275 40.0 28.8 15.00 12.50 T*9(C,V)*C16 21.0 FC/MC62D 1445 39.5 29.0 14.00 11.65 T*9(C,V)*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00 T*9(C,V)*C16 21.0 UC60C 1235 39.0 27.6 14.50 12.10 T*9(C,V)*C20 21.0 FC/MC62D 1445 40.0 29.4 14.00 11.65 T*9(C,V)*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00 T*9(C,V)*C20 21.0 UC60C 1330 39.5 29.0 14.50 12.00 T*9(C,V)*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 15.00 12.50 T*9(C,V)*D20 24.0 FC/MC62D 1455 40.0 29.6 14.50 12.00 T*9(C,V)*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00

T*9X*C16 21.0 FC/MC62D 1460 40.0 29.8 14.50 12.00 T*9X*C16 21.0 FC/PC60C 1315 40.5 29.6 15.00 12.50 T*9X*C16 21.0 UC60C 1315 39.5 29.0 15.00 12.50 T*9X*C20 21.0 FC/MC62D 1460 40.5 29.8 14.50 12.00 T*9X*C20 21.0 FC/PC60C 1240 40.0 28.8 15.00 12.50 T*9X*C20 21.0 UC60C 1240 39.0 27.8 15.00 12.50 T*9X*D20 24.0 FC/MC/PC60D 1310 40.5 29.8 15.00 12.50 T*9X*D20 24.0 FC/MC62D 1425 40.0 29.4 14.50 12.00

T*9X*D20 24.0 UC60D 1310 40.0 29.2 15.00 12.50 C*(8,L)C*C16 21.0 FC/MC62D 1420 40.0 29.2 14.50 12.00 C*(8,L)C*C16 21.0 FC/PC60C 1185 39.0 27.6 15.00 12.50 C*(8,L)C*C16 21.0 UC60C 1195 39.0 27.8 15.00 12.50 C*(8,L)C*C20 21.0 FC/MC62D 1365 39.5 28.4 14.50 12.00 C*(8,L)C*C20 21.0 FC/PC60C 1215 39.5 28.4 15.00 12.50 C*(8,L)C*C20 21.0 UC60C 1215 39.0 27.8 15.00 12.50

C*9C*C16 21.0 FC/MC62D 1445 39.5 29.0 14.00 11.65

C*9C*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00

C*9C*C16 21.0 UC60C 1235 39.0 27.6 14.50 12.10

C*9C*C20 21.0 FC/MC62D 1445 40.0 29.4 14.00 11.65

C*9C*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00

C*9C*C20 21.0 UC60C 1330 39.5 29.0 14.50 12.00

C*9C*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 15.00 12.50

C*9C*D20 24.0 FC/MC62D 1455 40.0 29.6 14.50 12.00

C*9C*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00

T*(8,L)V*C16 21.0 FC64 1635 47.5 36.6 15.00 12.50 T*(8,L)V*C20 21.0 FC64 1630 47.5 36.6 15.00 12.50 T*(8,L)X*C16 21.0 FC64 1610 48.0 36.6 15.00 12.50 T*(8,L)X*C20 21.0 FC/MC62D 1665 47.0 35.8 15.00 12.50 T*(8,L)X*C20 21.0 FC64 1665 48.0 36.8 15.00 12.50

T*9(C,V)*C16 21.0 FC64 1590 47.5 36.4 15.00 12.50

T*9X*C16 21.0 FC64 1550 47.5 36.6 15.00 12.50

T*9X*C20 21.0 FC/MC62D 1595 46.5 34.8 15.00 12.50

T*9X*C20 21.0 FC64 1595 48.0 36.8 15.00 12.50

T*9X*D20 24.5 FC64 1610 47.5 36.6 15.00 12.50 C*(8,L)C*C16 21.0 FC64 1635 47.5 36.6 15.00 12.50 C*(8,L)C*C20 21.0 FC64 1630 47.5 36.6 15.00 12.50

C*9C*C16 21.0 FC64 1590 47.5 36.4 15.00 12.50

COOLING

NET MBH

TOTAL SENS.

SEER EER

8 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING CAPACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

T*(8,L)V*C16 21.0 FC/MC62D

T*(8,L)V*C20 21.0 FC/MC62D

T*(8,L)V*C16 21.0 FC64

T*(8,L)V*C20 21.0 FC64

T*(8,L)X*C16 21.0 FC/MC62D

T*(8,L)X*C16 21.0 FC64

T*(8,L)X*C20 21.0 FC64

T*9(C,V)*C16 21.0 FC/MC62D

T*9(C,V)*C20 21.0 FC/MC62D

T*9(C,V)*D20 24.5 FC/MC62D

T*9(C,V)*C16 21.0 FC64

T*9(C,V)*C20 21.0 FC64

T*9(C,V)*D20 24.5 FC64

HC6B060F3(C)

C*(8,L)C*C16 21.0 FC/MC62D

C*(8,L)C*C20 21.0 FC/MC62D

C*(8,L)C*C16 21.0 FC64

C*(8,L)C*C20 21.0 FC64

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FURNACE

MODEL WIDTH STAGE

COIL

MODEL

16 SEER HP WITH HIGH EFFICIENCY FURNACES

1 1025 46.5 29.8 2 1635 55.5 38.5 11.45 1 1060 46.5 29.8 2 1620 55.5 39.0 11.60 1 1025 48.0 31.2 2 1635 57.0 40.0 11.75 1 1060 48.0 31.2 2 1630 57.0 40.0 11.85 1 1115 46.5 29.8 2 1610 55.5 39.0 11.65 1 1115 48.0 31.2 2 1610 57.0 40.0 11.90 1 835 45.0 28.0 2 1665 57.5 40.5 12.00 1 1040 46.5 29.8 2 1590 55.5 38.5 11.40 1 1040 46.5 29.8 2 1655 55.0 38.5 11.25 1 1085 46.5 29.8 2 1630 55.5 38.5 11.35 1 1040 48.0 31.2 2 1590 57.0 40.0 11.70 1 1040 48.0 31.2 2 1655 56.5 40.0 11.50 1 1085 48.0 31.2 2 1630 57.0 40.0 11.65

T*9X*C16 21.0 FC64

T*9X*C16 21.0 FC/MC62D

T*9X*C20 21.0 FC/MC62D

T*9X*C20 21.0 FC64

T*9X*D20 24.5 FC/MC62D

T*9X*D20 24.5 FC64

1 1085 48.0 31.2 2 1550 57.0 40.0 11.85 1 1085 46.5 29.8 2 1550 55.5 39.0 11.60 1 1220 47.5 31.2 2 1595 55.5 38.5 11.70 1 1220 49.5 32.6 2 1595 57.0 40.0 12.00 1 1240 48.0 31.4 2 1610 55.0 38.5 11.50 1 1240 49.5 32.8 2 1610 57.0 40.0 11.85 1 1025 46.5 29.8 2 1635 55.5 38.5 11.45 1 1060 46.5 29.8 2 1620 55.5 39.0 11.60 1 1025 48.0 31.2 2 1635 57.0 40.0 11.75 1 1060 48.0 31.2 2 1630 57.0 40.0 11.85

C*9C*C16 21.0 FC/MC62D

C*9C*C20 21.0 FC/MC62D

C*9C*D20 24.5 FC/MC62D

C*9C*C16 21.0 FC64

C*9C*C20 21.0 FC64

C*9C*D20 24.5 FC64

1 1040 46.5 29.8 2 1590 55.5 38.5 11.40 1 1040 46.5 29.8 2 1655 55.0 38.5 11.25 1 1085 46.5 29.8 2 1630 55.5 38.5 11.35 1 1040 48.0 31.2 2 1590 57.0 40.0 11.70 1 1040 48.0 31.2 2 1655 56.5 40.0 11.50 1 1085 48.0 31.2 2 1630 57.0 40.0 11.65

RATED

CFM

Johnson Controls Unitary Products 9

COOLING NET MBH

TOTAL SENS.

SEER EER

15.00

20.80

21.60

20.80

21.60

20.35

20.80

21.60

20.80

20.35

21.10

20.50

21.25

20.80

21.60

20.80

21.60

632152-CTG-E-0812

HEATING CAPACITY - With Air Handler Coils

UNIT

MODEL

AIR HANDLER

MODEL

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17FHSPF

HEATING

16 SEER HP WITH AIR HANDLERS

AHE24B –

AHE30B –

79523.83.881.8015.12.561.738.50

515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40

795 23.8 3.88 1.80 15.1 2.56 1.73 8.50

515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40

AHR24B – 740 24.2 3.64 1.95 15.1 2.40 1.84 7.85

710 24.0 3.70 1.90 15.2 2.44 1.83 9.00

470* 23.8 3.54 1.97 14.6 2.38 1.80 8.50

775 24.0 3.78 1.86 15.3 2.50 1.79 9.00

500* 24.0 3.74 1.88 14.8 2.52 1.72 8.50

760 24.0 4.08 1.72 15.3 2.70 1.66 9.00

485* 24.0 3.80 1.85 14.8 2.56 1.69 8.50

725 23.8 3.92 1.78 14.8 2.66 1.63 9.00

630* 23.8 3.74 1.86 14.6 2.52 1.70 8.85

800 24.0 3.82 1.84 15.0 2.54 1.73 8.50

600* 23.8 3.54 1.97 14.6 2.38 1.80 8.50

800 24.0 4.02 1.76 14.9 2.70 1.62 9.00

600* 23.8 3.62 1.93 14.6 2.44 1.75 8.55

815 23.8 3.92 1.78 14.8 2.60 1.67 9.00

660* 23.8 3.70 1.88 14.5 2.48 1.71 8.95

735 23.8 3.90 1.79 14.8 2.64 1.64 9.00 620* 23.8 3.68 1.89 14.5 2.48 1.71 8.90 1000 29.4 4.02 2.14 19.0 2.78 2.00 9.00 600* 29.1 3.73 2.28 19.0 2.78 2.00 8.80

HC6B024F3(C)

AHV24B –

AHV30B –

AHV36C –

AV*36 –

MV12B FC/MC35B

MV12B FC/MC43B

MX12B FC/MC35B

MX12B FC/MC43B

AHE36C – AHR36B – 1060 30.0 4.00 2.17 19.9 2.78 2.00 9.15

895 29.6 3.88 2.24 19.1 2.72 2.06 9.00 640* 28.8 3.68 2.29 18.8 2.54 2.17 9.00

960 29.4 4.02 2.14 18.9 2.80 1.98 9.00 725* 28.9 3.75 2.26 18.9 2.80 1.98 9.00 1000 29.6 3.88 2.24 19.1 2.72 2.06 9.00 800* 29.0 3.72 2.28 18.8 2.54 2.17 9.00

HC6B030F3(C)

AHV36C –

AV*36 –

MV12B FC/MC43B MV16C FC/MC43C 1000 29.6 3.96 2.19 19.0 2.76 2.02 9.00 MX12B FC/MC43B

1095 29.8 4.04 2.16 19.1 2.78 2.01 9.00 620* 29.1 3.73 2.28 19.0 2.78 2.00 8.80

MX16C FC/MC43C 970 28.8 3.76 2.24 18.8 2.66 2.07 9.00

AHE42D –

118035.63.982.6223.22.782.459.00 685* 35.0 3.40 3.29 23.2 2.80 2.43 8.80

AHE48D – 1195 35.0 3.90 2.62 23.2 2.76 2.45 9.00 AHR42C – 1230 37.0 3.78 2.87 24.0 2.64 2.66 7.85

1180 36.0 3.68 2.87 23.6 2. 50 2.77 9.00 790* 35.8 3.66 2.87 22.8 2.72 2.46 8.50 1155 36.0 3.62 2.91 23.6 2. 44 2.83 9.00 835* 35.6 3.64 2.87 22.6 2.66 2.49 8.50 1220 36.0 4.20 2.55 23.2 2.92 2.33 9.00 960* 36.0 3.40 3.19 23.2 2.92 2.33 9.00 1160 36.0 3.98 2.65 23.2 2. 80 2.43 9.00

1000* 36.0 3.40 3.29 23.2 2.80 2.43 9.00

1135 36.0 4.10 2.60 23.2 2. 86 2.38 9.00

1000* 36.0 3.40 3.24 23.2 2.86 2.38 9.00

1200 36.0 3.92 2.71 23.4 2.76 2.48 9.00

1000* 36.0 3.40 3.35 23.4 2.76 2.48 9.00

1225 35.6 3.96 2.63 23.2 2.80 2.43 9.00 850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80 1275 35.6 4.20 2.48 23.2 2.88 2.36 9.00 850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80 1150 35.8 3.96 2.65 23.0 2. 80 2.41 9.00 995* 35.6 3.62 2.88 22.8 2.70 2.47 8.95

HC6B036F3(C)

AHV42D –

AHV48D –

AV*48 –

MV12D FC/MC48D

MV12D FC/MC60D

MV16C FC/MC48C

MX12D FC/MC48D

MX12D FC/MC60D

MX16C FC/MC48C

For notes, see Page 11.

10 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

AIR HANDLER

MODEL

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17F HSPF

HEATING

16 SEER HP WITH AIR HANDLERS

AHE48D –

AHE60D –

120040.53.883.0625.62.682.808.50

1000* 39.5 3.98 2.91 25.8 2.86 2.64 9.20

138540.04.122.8425.42.762.709.00

1150* 39.5 3.98 2.91 25.4 2.76 2.70 8.98

AHR60D – 1350 41.0 3.94 3.05 26.2 2.66 2.89 7.80

115540.53.843.0925.62.662.828.50 875*39.53.902.9726.02.742.789.00

134040.04.042.9025.62.742.748.50 955*39.53.982.9125.42.762.709.00

120041.04.082.9425.62.802.688.50

1000* 40.0 3.84 3.05 25.4 2.74 2.72 8.98

HC6B042F4(C)

AHV48D –

AHV60D –

AV*48 – 122041.04.122.9225.62.822.669.00 MV16C FC60C MV20D FC/MC60D 1300 41.0 4.16 2.89 25.6 2.84 2.64 8.50 MV20D FC/MC62D

MX16C FC60C

140040.54.102.8925.62.762.728.50

1300* 40.0 4.12 2.84 25.4 2.70 2.76 8.98

115040.54.122.8825.42.822.649.00 995*40.03.903.0125.22.762.688.98

MX20D FC/MC60D 1295 41.0 4.24 2.83 25.4 2.88 2.58 9.00 MX20D FC/MC62D

AHE60D –

147040.04.242.7625.42.842.629.00

1260* 39.5 4.12 2.81 25.4 2.72 2.74 8.98

156547.03.803.6233.42.703.629.00

1160* 46.8 3.33 4.30 33.4 2.72 3.60 8.80

AHR60D – 1620 51.0 3.64 4.11 34.2 2.60 3.85 7.85 AHV60D –

HC6B048F3(C)

MV20D FC/MC62D

MV20D FC64

MX20D FC/MC62D

MX20D FC64

1. Rated CFM same as for cooling.

2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb ) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.

* Notates “Hot Heat Pump” performance. These ratings are not AHRI Listed. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. — = Not Applicable. MA Modular Air Handlers use Coil Only Ratings.

157048.03.743.7633.82.663.729.00

1000* 48.0 3.34 4.21 32.0 2.52 3.72 8.50

163048.03.783.9133.62.703.659.00

1000* 48.0 3.29 4.38 33.6 2.70 3.65 9.00

163048.03.943.7934.02.783.589.00

1000* 48.0 3.45 4.26 34.0 2.78 3.58 9.00

160547.03.863.5733.22.763.529.00

1260* 46.9 3.56 4.03 32.4 2.62 3.62 8.80

1605 47.0 3.98 3.46 33.6 2.82 3.49 9.00

1260* 46.9 3.66 3.92 32.6 2.72 3.51 8.85

Johnson Controls Unitary Products 11

632152-CTG-E-0812

HEATING CAPACITY - With Air Handler Coils

UNIT

MODEL

AIR HANDLER

MODEL

COIL

MODEL

STAGE

RATED

CFM

HEATING

NET MBH

47 OD 17 OD

16 SEER HP WITH AIR HANDLERS

1 1160 42.5 – – 3.46

AHE60D –

2 1835 58.0 39.0 9.00 3.80 2 1160* 57.0 38.5 8.60 3.28 1 1090 41.5 – – 3.30

AHV60D –

2 1635 59.5 38.0 8.95 3.60 2 1090* 57.5 37.0 8.70 3.46 1 1075 41.5 – – 3.42

MV20D FC/MC62D

HC6B060F3(C)

MV20D FC64

2 1630 58.0 38.0 9.00 3.72 2 1075* 57.5 38.5 9.00 3.24 1 1075 42.0 – – 3.52 2 1630 58.0 38.0 9.00 3.82 2 1075* 58.0 38.5 9.00 3.32 1 1390 43.0 – – 3.62

MX20D FC/MC62D

2 1795 58.0 38.5 9.00 3.80 2 1390* 57.0 38.5 8.60 3.52 1 1390 44.0 – – 3.72

MX20D FC64

2 1795 58.0 39.0 9.00 3.94 2 1390* 57.0 39.0 8.60 3.62

1. Rated CFM same as for cooling.

2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air , 72% RH (Relat ive Hu midity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.

during the same period. — = Not Applicable. MA Modular Air Handlers use Coil Only Ratings.

HSPF COP @ 47

HEATING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings)

UNIT

MODEL

COIL

MODEL

47F17FHSPF

HEATING

MBH COP KW MBH COP KW STD

16 SEER HP COIL ONLY RATINGS

FC/MC/PC32 23.6 3.56 1.94 15.6 2.38 1.92 7.80

HC6B024F3(C)

FC/MC/PC35 23.6 3.56 1.94 15.6 2.38 1.92 7.80 FC/MC/PC37 23.6 3.70 1.87 15.5 2.50 1.82 7.80 FC/MC/PC43 23.6 3.70 1.87 15.5 2.50 1.82 7.80

HC6B030F3(C)

FC/MC/PC37 29.6 3.74 2.32 19.7 2.62 2.20 8.20 FC/MC/PC43 29.6 3.74 2.32 19.7 2.62 2.20 8.20 FC/MC/PC48 35.6 3.70 2.82 24.0 2.62 2.68 7.80

HC6B036F3(C)

FC/MC/PC60 35.6 3.86 2.70 23.8 2.72 2.56 7.80

UC48 36.0 3.86 2.82 24.0 2.68 2.62 7.80 UC60 36.0 3.84 2.84 23.4 2.60 2.64 7.80

FC/MC/PC60 41.0 3.70 3.25 26.4 2.52 3.07 7.80

HC6B042F4(C)

FC/MC62 41.0 3.88 3.10 26.4 2.62 2.95 7.80

UC60 41.5 3.80 3.20 26.0 2.60 2.93 7.80

HC6B048F3(C)

1. Rated CFM same as for cooling.

2. Heating MBH based on ARI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.

COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. — = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FC/MC62 47.0 3.64 3.78 34.2 2.60 3.85 7 .80

FC64 47.03.763.6634.82.663.837.80

12 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings)

UNIT

MODEL

COIL

MODEL

STAGE

RATED

CFM

HEATING NET MBH

47 OD 17 OD

16 SEER HP COIL ONLY RATINGS

1 1350 43.5 – – 3.42

FC/MC62

HC6B060F3(C)

FC64

2 1800 58 39.0 9.0 3.66 2 1350* 57 38.5 8.6 3.36 1 1350 44 – – 3.52 2 1800 58 39.0 9.0 3.76 2 1350* 57 38.5 8.6 3.44

1. Rated CFM same as for cooling.

2. Heating MBH based on AHRI standards of 70° DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.

HSPF COP @ 47

HEATING CAPACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

HC6B024F3(C)

For notes, see Page 18.

FURNACE

MODEL

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17F HSPF

HEATING

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*A12 FC/MC/PC32A

T*(8,L)V*A12 FC/MC/PC37A

T*(8,L)V*B12 FC/MC/PC35B

T*(8,L)V*B12 FC/MC/PC43B

755 24.03.761.8715.12.521.768.50

590* 23.8 3.51 1.96 15.1 2.52 1.76 8.50

765 24.0 3.90 1.80 15.0 2.62 1.68 8.50

585* 23.8 3.65 1.89 15.0 2.62 1.68 8.50

785 24.0 3.80 1.85 15.1 2.52 1.76 8.50

515* 23.8 3.55 1.94 15.1 2.52 1.76 8.50

790 24.0 3.92 1.79 15.0 2.64 1.66 9.00

515* 23.8 3.67 1.88 15.0 2.64 1.66 9.00

T*(8,L)V*C16 FC/MC/PC35C 775 23.8 3.80 1.84 15.0 2.54 1.73 8.50 T*(8,L)V*C16 FC/MC/PC43C

770 24.0 3.92 1.79 14.9 2.64 1.65 9.00

645* 23.8 3.67 1.88 14.9 2.64 1.65 9.00 T*(8,L)V*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 T*(8,L)V*C20 FC/MC/PC43C 740 23.8 3.88 1.80 14.9 2.62 1.67 9.00

T*(8,L)X*A12 FC/MC/PC32A

T*(8,L)X*A12 FC/MC/PC37A

T*(8,L)X*B12 FC/MC/PC35B

T*(8,L)X*B12 FC/MC/PC43B

T*(8,L)X*C16 FC/MC/PC35C

T*(8,L)X*C16 FC/MC/PC43C

800 23.8 3.92 1.78 14.9 2.60 1.68 8.50

530* 23.3 3.67 1.87 14.9 2.60 1.68 8.50

840 24.0 4.08 1.72 14.8 2.74 1.58 9.00

640* 23.8 3.83 1.81 14.8 2.74 1.58 9.00

850 24.0 3.98 1.77 14.9 2.62 1.67 8.50

675* 23.8 3.73 1.86 14.9 2.62 1.67 8.50

865 24.0 4.10 1.72 14.8 2.74 1.58 9.00

700* 23.8 3.85 1.81 14.8 2.74 1.58 9.00

865 24.0 3.98 1.77 14.9 2.62 1.67 8.50

625* 23.8 3.73 1.86 14.9 2.62 1.67 8.50

855 24.0 4.10 1.72 14.8 2.74 1.58 9.00

655* 23.8 3.85 1.81 14.8 2.74 1.58 9.00 T*(8,L)X*C20 FC/MC/PC35C 885 24.0 3.92 1.79 15.0 2.60 1.69 8.50 T*(8,L)X*C20 FC/MC/PC43C 815 24.0 4.06 1.73 14.9 2.72 1.61 9.00

T*9(C,V)*B12 FC/MC/PC35B

T*9(C,V)*B12 FC/MC/PC43B

T*9(C,V)*C16 FC/MC/PC35C

815 24.0 3.86 1.84 15.1 2.56 1.73 8.50

550* 23.8 3.61 1.93 15.1 2.56 1.73 8.50

800 24.0 3.98 1.78 15.0 2.66 1.65 8.50

550* 23.8 3.73 1.87 15.0 2.66 1.65 8.50

900 24.0 3.92 1.81 15.1 2.56 1.73 8.50

645* 23.8 3.67 1.90 15.1 2.56 1.73 8.50

T*9(C,V)*C16 FC/MC/PC43C 810 24.0 4.02 1.76 14.9 2.68 1.63 9.00

Johnson Controls Unitary Products 13

632152-CTG-E-0812

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B024F3(C)

HC6B030F3(C)

For notes, see Page 18.

FURNACE

MODEL

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*9(C,V)*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 T*9(C,V)*C20 FC/MC/PC43C 890 24.0 4.04 1.77 15.0 2.66 1.65 9.00

T*9V*A10 FC/MC/PC32A

T*9V*A10 FC/MC/PC37A

T*9X*A10 FC/MC/PC32A

T*9X*A10 FC/MC/PC37A

T*9X*B12 FC/MC/PC35B

T*9X*B12 FC/MC/PC43B

T*9X*C16 FC/MC/PC35C T*9X*C16 FC/MC/PC43C 785 24.0 4.02 1.75 15.0 2.66 1.65 9.00

T*9X*C20 FC/MC/PC35C 825 24.0 3.94 1.78 15.0 2.60 1.69 8.50 T*9X*C20 FC/MC/PC43C 790 24.0 4.00 1.76 15.1 2.64 1.68 9.00

C*(8,L)C*A12 FC/MC/PC32A

C*(8,L)C*A12 FC/MC/PC37A

C*(8,L)C*B12 FC/MC/PC35B

C*(8,L)C*B12 FC/MC/PC43B C*(8,L)C*C16 FC/MC/PC35C 775 23.8 3.80 1.84 15.0 2.54 1.73 8.50 C*(8,L)C*C16 FC/MC/PC43C C*(8,L)C*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50

C*(8,L)C*C20 FC/MC/PC43C 740 23.8 3.88 1.80 14.9 2.62 1.67 9.00

C*9C*B12 FC/MC/PC35B

C*9C*B12 FC/MC/PC43B

C*9C*C16 FC/MC/PC35C C*9C*C16 FC/MC/PC43C 810 24.0 4.02 1.76 14.9 2.68 1.63 9.00

C*9C*C20 FC/MC/PC35C 755 23.8 3.78 1.84 15.0 2.52 1.74 8.50 C*9C*C20 FC/MC/PC43C 890 24.0 4.04 1.77 15.0 2.66 1.65 9.00

T*(8,L)V*A12 FC/MC/PC37A

T*(8,L)V*B12 FC/MC/PC43B

T*(8,L)V*C16 FC/MC/PC43C

T*(8,L)V*C20 FC/MC/PC43C

T*(8,L)X*A12 FC/MC/PC37A

T*(8,L)X*B12 FC/MC/PC43B

T*(8,L)X*C16 FC/MC/PC43C

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17FHSPF

785 24.0 3.72 1.91 15.2 2.46 1.81 8.20

580* 23.8 3.52 1.98 14.6 2.36 1.81 8.15

790 24.0 3.82 1.87 15.3 2.52 1.78 8.20

570* 23.8 3.52 1.98 14.6 2.38 1.80 8.15

745 24.0 3.72 1.89 15.1 2.46 1.80 8.40

585* 23.8 3.52 1.98 14.6 2.38 1.80 8.35

740 24.0 3.80 1.87 15.1 2.52 1.76 8.45

580* 23.8 3.62 1.93 14.6 2.42 1.77 8.40

785 23.8 3.84 1.82 15.0 2.56 1.72 8.50

620* 23.6 3.59 1.91 15.0 2.56 1.72 8.45

800 24.0 4.02 1.75 15.0 2.66 1.65 9.00

645* 23.6 3.59 1.91 15.0 2.56 1.72 8.80

765 23.8 3.80 1.84 15.0 2.54 1.73 8.50

610* 23.3 3.55 1.93 15.0 2.54 1.73 8.50

755 24.0 3.76 1.87 15.1 2.52 1.76 8.50

590* 23.8 3.51 1.96 15.1 2.52 1.76 8.50

765 24.0 3.90 1.80 15.0 2.62 1.68 8.50

585* 23.8 3.65 1.89 15.0 2.62 1.68 8.50

785 24.0 3.80 1.85 15.1 2.52 1.76 8.50

515* 23.8 3.55 1.94 15.1 2.52 1.76 8.50

790 24.0 3.92 1.79 15.0 2.64 1.66 9.00

515* 23.8 3.67 1.88 15.0 2.64 1.66 9.00

770 24.0 3.92 1.79 14.9 2.64 1.65 9.00

645* 23.8 3.67 1.88 14.9 2.64 1.65 9.00

815 24.0 3.86 1.84 15.1 2.56 1.73 8.50

550* 23.8 3.61 1.93 15.1 2.56 1.73 8.50

800 24.0 3.98 1.78 15.0 2.66 1.65 8.50

550* 23.8 3.73 1.87 15.0 2.66 1.65 8.50

900 24.0 3.92 1.81 15.1 2.56 1.73 8.50

645* 23.8 3.67 1.90 15.1 2.56 1.73 8.50

95029.63.862.2519.22.702.089.00

630* 29.1 3.59 2.36 19.2 2.70 2.08 9.00

1045 29.8 3.92 2.23 19.2 2.74 2.05 9.00

715* 29.3 3.65 2.34 19.2 2.74 2.05 9.00

1035 29.6 4.00 2.17 19.0 2.78 2.00 9.00

695* 29.1 3.73 2.28 19.0 2.78 2.00 9.00

1025 29.4 4.04 2.13 18.9 2.80 1.98 9.00

690* 28.9 3.77 2.25 18.9 2.80 1.98 9.00

1090 30.0 4.06 2.17 19.2 2.80 2.01 9.00

605* 29.5 3.79 2.28 19.2 2.80 2.01 9.00

1090 30.0 4.06 2.17 19.2 2.80 2.01 9.00

660* 29.5 3.79 2.28 19.2 2.80 2.01 9.00

955 29.4 3.96 2.18 18.9 2.78 1.99 9.00

710* 28.9 3.69 2.29 18.9 2.78 1.99 9.00

HEATING

14 Johnson Controls Unitary Products

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B030F3(C)

HC6B036F3(C)

For notes, see Page 18.

FURNACE

MODEL

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)X*C20 FC/MC/PC43C

T*9(C,V)*B12 FC/MC/PC43B

T*9(C,V)*C16 FC/MC/PC43C

T*9(C,V)*C20 FC/MC/PC43C

T*9X*B12 FC/MC/PC43B

T*9X*C16 FC/MC/PC43C

C*(8,L)C*A12 FC/MC/PC37A

C*(8,L)C*B12 FC/MC/PC43B

C*(8,L)C*C16 FC/MC/PC43C

C*(8,L)C*C20 FC/MC/PC43C

C*9C*B12 FC/MC/PC43B

C*9C*C16 FC/MC/PC43C

C*9C*C20 FC/MC/PC43C

T*(8,L)V*C16 FC/MC/PC48C

T*(8,L)V*C20 FC/MC/PC48C

T*9(C,V)*D20 FC/MC/PC48D

T*(8,L)V*C16 FC/PC60C

T*(8,L)V*C20 FC/PC60C

T*9(C,V)*D20 FC/MC/PC60D

T*(8,L)V*C16 UC48C

T*(8,L)V*C20 UC48C

T*(8,L)V*C16 UC60C

T*(8,L)V*C20 UC60C

T*(8,L)X*C16 FC/MC/PC48C

T*(8,L)X*C16 FC/PC60C

T*(8,L)X*C16 UC48C

T*(8,L)X*C16 UC60C

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17F HSPF

870 29.03.862.2018.82.762.009.00 780* 28.5 3.59 2.31 18.8 2.76 2.00 9.00 1035 30.0 3.88 2.27 19.3 2.70 2.09 9.00 670* 29.5 3.61 2.38 19.3 2.70 2.09 9.00 1030 29.8 3.92 2.23 19.2 2.74 2.05 9.00 680* 29.3 3.65 2.34 19.2 2.74 2.05 9.00

995 29.6 3.94 2.20 19.1 2.74 2.04 9.00 675* 29.1 3.67 2.31 19.1 2.74 2.04 9.00 1095 29.8 4.08 2.14 19.2 2.80 2.01 9.00 775* 29.3 3.81 2.25 19.2 2.80 2.01 9.00 1055 29.8 4.10 2.13 19.1 2.82 1.98 9.00 695* 29.3 3.83 2.24 19.1 2.82 1.98 9.00

950 29.6 3.86 2.25 19.2 2.70 2.08 9.00 630* 29.1 3.59 2.36 19.2 2.70 2.08 9.00 1045 29.8 3.92 2.23 19.2 2.74 2.05 9.00 715* 29.3 3.65 2.34 19.2 2.74 2.05 9.00 1035 29.6 4.00 2.17 19.0 2.78 2.00 9.00 695* 29.1 3.73 2.28 19.0 2.78 2.00 9.00 1025 29.4 4.04 2.13 18.9 2.80 1.98 9.00 690* 28.9 3.77 2.25 18.9 2.80 1.98 9.00 1035 30.0 3.88 2.27 19.3 2.70 2.09 9.00 670* 29.5 3.61 2.38 19.3 2.70 2.09 9.00 1030 29.8 3.92 2.23 19.2 2.74 2.05 9.00 680* 29.3 3.65 2.34 19.2 2.74 2.05 9.00

995 29.6 3.94 2.20 19.1 2.74 2.04 9.00 675* 29.1 3.67 2.31 19.1 2.74 2.04 9.00

119536.03.902.7223.42.742.509.00

1000* 36.0 3.30 3.36 23.4 2.74 2.50 9.00

1150 36.0 3.92 2.71 23.4 2.76 2.48 9.00

1000* 36.0 3.32 3.35 23.4 2.76 2.48 9.00

1240 36.0 3.96 2.69 23.4 2.76 2.48 9.00

1000* 36.0 3.36 3.33 23.4 2.76 2.48 9.00

1185 36.0 4.12 2.59 23.2 2.88 2.36 9.00

1000* 36.0 3.52 3.23 23.2 2.88 2.36 9.00

1215 36.0 4.14 2.59 23.2 2.88 2.36 9.00

1000* 36.0 3.54 3.23 23.2 2.88 2.36 9.00

1225 36.0 4.12 2.62 23.4 2.86 2.40 9.00

1000* 36.0 3.52 3.26 23.4 2.86 2.40 9.00

1210 36.0 4.06 2.63 23.4 2.84 2.41 9.00

1000* 36.0 3.46 3.27 23.4 2.84 2.41 9.00

1155 36.0 4.10 2.60 23.2 2.86 2.38 9.00

1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00

1195 36.0 4.08 2.61 23.0 2.82 2.39 9.00

1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00

1215 36.0 4.06 2.63 23.0 2.82 2.39 9.00

1000* 36.0 3.46 3.27 23.0 2.82 2.39 9.00

1185 36.0 3.98 2.65 23.2 2.80 2.43 9.00

1000* 36.0 3.38 3.29 23.2 2.80 2.43 9.00

1190 36.0 4.16 2.55 23.0 2.92 2.31 9.00

1000* 36.0 3.56 3.19 23.0 2.92 2.31 9.00

1185 36.0 4.16 2.55 23.0 2.90 2.32 9.00

1000* 36.0 3.56 3.19 23.0 2.90 2.32 9.00

1190 36.0 4.16 2.55 22.8 2.86 2.34 9.00

1000* 36.0 3.56 3.19 22.8 2.86 2.34 9.00

HEATING

632152-CTG-E-0812

Johnson Controls Unitary Products 15

632152-CTG-E-0812

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B036F3(C)

HC6B042F4(C)

For notes, see Page 18.

FURNACE

MODEL

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)X*C20 FC/MC/PC48C

T*(8,L)X*C20 FC/PC60C

T*(8,L)X*C20 UC48C

T*(8,L)X*C20 UC60C

T*9X*C16 FC/MC/PC48C

T*9X*C16 FC/PC60C

T*9X*C16 UC48C

T*9X*C16 UC60C

T*9X*C20 FC/MC/PC48C

T*9X*C20 FC/PC60C

T*9X*C20 UC48C

T*9X*C20 UC60C

T*9X*D20 FC/MC/PC48D

T*9X*D20 FC/MC/PC60D

T*9X*D20 UC48D

T*9X*D20 UC60D

C*(8,L)C*C16 FC/MC/PC48C

C*(8,L)C*C16 FC/PC60C

C*(8,L)C*C16 UC48C

C*(8,L)C*C16 UC60C

C*(8,L)C*C20 FC/MC/PC48C

C*(8,L)C*C20 FC/PC60C

C*(8,L)C*C20 UC48C

C*(8,L)C*C20 UC60C

C*9C*D20 FC/MC/PC48D

C*9C*D20 FC/MC/PC60D T*(8,L)V*C16 FC/MC62D 1420 41.0 4.08 2.94 25.8 2.72 2.78 8.50 T*(8,L)V*C16 FC/PC60C

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17FHSPF

1270 36.0 4.04 2.63 23.4 2.82 2.43 9.00

1000* 36.0 3.44 3.27 23.4 2.82 2.43 9.00

1275 36.6 4.22 2.54 23.2 2.92 2.33 9.00

1000* 36.0 3.62 3.18 23.2 2.92 2.33 9.00

1270 36.0 4.16 2.56 23.2 2.90 2.34 9.00

1000* 36.0 3.56 3.20 23.2 2.90 2.34 9.00

1275 36.0 4.16 2.56 23.0 2.86 2.36 9.00

1000* 36.0 3.56 3.20 23.0 2.86 2.36 9.00

1280 36.0 3.98 2.68 23.4 2.78 2.47 9.00

1000* 36.0 3.38 3.32 23.4 2.78 2.47 9.00

1315 36.0 4.20 2.57 23.2 2.86 2.38 9.00

1000* 36.0 3.60 3.21 23.2 2.86 2.38 9.00

1280 36.0 4.10 2.62 23.4 2.86 2.40 9.00

1000* 36.0 3.50 3.26 23.4 2.86 2.40 9.00

1300 36.0 4.14 2.59 23.0 2.84 2.37 9.00

1000* 36.0 3.54 3.23 23.0 2.84 2.37 9.00

1205 36.0 3.92 2.71 23.4 2.74 2.50 9.00

1000* 36.0 3.32 3.35 23.4 2.74 2.50 9.00

1240 36.0 4.18 2.57 23.2 2.90 2.34 9.00

1000* 36.0 3.58 3.21 23.2 2.90 2.34 9.00

1205 36.0 4.08 2.61 23.2 2.86 2.38 9.00

1000* 36.0 3.48 3.25 23.2 2.86 2.38 9.00

1240 36.0 4.08 2.61 23.0 2.82 2.39 9.00

1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00

1240 36.0 4.02 2.65 23.4 2.80 2.45 9.00

1000* 36.0 3.42 3.29 23.4 2.80 2.45 9.00

1310 36.0 4.28 2.51 23.0 2.92 2.31 9.00

1000* 36.0 3.68 3.15 23.0 2.92 2.31 9.00

1240 36.0 4.10 2.60 23.2 2.86 2.38 9.00

1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00

1310 36.0 4.22 2.53 23.0 2.88 2.34 9.00

1000* 36.0 3.62 3.17 23.0 2.88 2.34 9.00

1195 36.0 3.90 2.72 23.4 2. 74 2.50 9.00

1000* 36.0 3.30 3.36 23.4 2.74 2.50 9.00

1185 36.0 4.12 2.59 23.2 2. 88 2.36 9.00

1000* 36.0 3.52 3.23 23.2 2.88 2.36 9.00

1210 36.0 4.06 2.63 23.4 2.84 2.41 9.00

1000* 36.0 3.46 3.27 23.4 2.84 2.41 9.00

1195 36.0 4.08 2.61 23.0 2. 82 2.39 9.00

1000* 36.0 3.48 3.25 23.0 2.82 2.39 9.00

1150 36.0 3.92 2.71 23.4 2. 76 2.48 9.00

1000* 36.0 3.32 3.35 23.4 2.76 2.48 9.00

1215 36.0 4.14 2.59 23.2 2.88 2.36 9.00

1000* 36.0 3.54 3.23 23.2 2.88 2.36 9.00

1155 36.0 4.10 2.60 23.2 2. 86 2.38 9.00

1000* 36.0 3.50 3.24 23.2 2.86 2.38 9.00

1215 36.0 4.06 2.63 23.0 2.82 2.39 9.00

1000* 36.0 3.46 3.27 23.0 2.82 2.39 9.00

1240 36.0 3.96 2.69 23.4 2.76 2.48 9.00

1000* 36.0 3.36 3.33 23.4 2.76 2.48 9.00

1225 36.0 4.12 2.62 23.4 2.86 2.40 9.00

1000* 36.0 3.52 3.26 23.4 2.86 2.40 9.00

1185 40.5 3.82 3.11 25.6 2. 64 2.84 8.50

1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98

HEATING

16 Johnson Controls Unitary Products

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B042F4(C)

For notes, see Page 18.

FURNACE

MODEL

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*C16 UC60C T*(8,L)V*C20 FC/MC62D 1365 40.5 4.06 2.92 25.8 2.74 2.76 8.50 T*(8,L)V*C20 FC/PC60C

T*(8,L)V*C20 UC60C T*(8,L)X*C16 FC/MC62D 1360 40.5 4.14 2.87 25.6 2.78 2.70 9.00 T*(8,L)X*C16 FC/PC60C

T*(8,L)X*C16 UC60C T*(8,L)X*C20 FC/MC62D 1485 40.5 4.22 2.81 25.6 2.80 2.68 9.00 T*(8,L)X*C20 FC/PC60C

T*(8,L)X*C20 UC60C T*9(C,V)*C16 FC/MC62D 1445 41.0 4.00 3.00 26.2 2.68 2.86 8.20 T*9(C,V)*C16 FC/PC60C

T*9(C,V)*C16 UC60C T*9(C,V)*C20 FC/MC62D 1445 41.0 4.06 2.96 26.0 2.72 2.80 8.20 T*9(C,V)*C20 FC/PC60C

T*9(C,V)*C20 UC60C

T*9(C,V)*D20 FC/MC/PC60D

T*9(C,V)*D20 FC/MC62D

T*9(C,V)*D20 UC60D

T*9X*C16 FC/MC62D 1460 40.5 4.14 2.87 25.8 2.76 2.74 8.50 T*9X*C16 FC/PC60C

T*9X*C16 UC60C T*9X*C20 FC/MC62D 1460 40.5 4.18 2.84 25.6 2.80 2.68 8.50 T*9X*C20 FC/PC60C

T*9X*C20 UC60C

T*9X*D20 FC/MC/PC60D

T*9X*D20 FC/MC62D

T*9X*D20 UC60D C*(8,L)C*C16 FC/MC62D 1420 41.0 4.08 2.94 25.8 2.72 2.78 8.50 C*(8,L)C*C16 FC/PC60C

C*(8,L)C*C16 UC60C

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17F HSPF

119541.04.003.0025.42.722.748.50

1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98

1215 41.0 4.08 2.94 25.8 2.80 2.70 8.50 970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98 1215 41.0 4.00 3.00 25.4 2.72 2.74 8.50 970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98

1190 40.5 3.86 3.07 25.4 2.66 2.80 8.50

1115* 40.5 4.00 2.97 25.4 2.80 2.66 8.98

1190 40.5 4.06 2.92 25.2 2.78 2.66 9.00

1115* 39.5 3.88 2.78 24.9 2.88 2.60 8.50

1275 41.0 4.16 2.89 25.6 2.82 2.66 8.50 895* 39.5 3.74 3.09 25.0 2.72 2.69 8.98 1275 40.5 4.08 2.91 25.2 2.76 2.68 8.50 895* 40.0 3.90 2.80 25.3 2.88 2.60 8.50

1235 41.0 4.02 2.99 26.0 2.74 2.78 8.20

1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48

1235 41.0 3.90 3.08 25.6 2.68 2.80 8.20

1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48

1330 41.5 4.08 2.98 26.0 2.76 2.76 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 1330 41.5 4.02 3.02 25.6 2.70 2.78 8.20 980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48 1225 41.0 4.06 2.96 25.8 2.78 2.72 8.50

1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98

1455 41.0 4.08 2.94 25.8 2.74 2.76 8.20

1235* 40.0 3.96 2.96 25.6 2.74 2.74 8.48

1225 41.0 3.96 3.03 25.6 2.70 2.78 8.20

1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98

1315 41.0 4.16 2.89 25.8 2.82 2.68 8.50

1080* 40.0 3.96 2.96 25.4 2.78 2.68 8.98

1315 41.0 4.08 2.94 25.4 2.76 2.70 8.50

1080* 40.0 3.78 2.80 25.1 2.86 2.64 8.20

1240 41.0 4.12 2.92 25.6 2.80 2.68 8.50 905* 39.5 3.74 3.09 25.2 2.72 2.71 8.98 1240 41.0 4.00 3.00 25.4 2.74 2.72 8.50 905* 40.0 3.82 2.86 25.1 2.84 2.66 8.50 1310 41.0 4.20 2.86 25.6 2.86 2.62 9.00 945* 39.5 3.84 3.01 25.2 2.76 2.68 8.98 1425 40.5 4.18 2.84 25.6 2.78 2.70 8.50

1225* 39.5 4.00 2.89 25.6 2.78 2.70 8.98

1310 41.0 4.14 2.90 25.2 2.80 2.64 8.50 945* 40.0 3.94 2.76 25.1 2.90 2.59 8.50

1185 40.5 3.82 3.11 25.6 2.64 2.84 8.50

1050* 40.0 3.92 2.99 25.4 2.78 2.68 8.98

1195 41.0 4.00 3.00 25.4 2.72 2.74 8.50

1050* 40.0 3.76 2.86 25.1 2.84 2.66 8.20

HEATING

632152-CTG-E-0812

Johnson Controls Unitary Products 17

632152-CTG-E-0812

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

FURNACE

MODEL

COIL

MODEL

RATED

CFM

MBH COP KW MBH COP KW STD

47F17FHSPF

HEATING

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

C*(8,L)C*C20 FC/MC62D 1365 40.5 4.06 2.92 25.8 2.74 2.76 8.50 C*(8,L)C*C20 FC/PC60C

C*(8,L)C*C20 UC60C

1215 41.0 4.08 2.94 25.8 2.80 2.70 8.50

970* 40.0 3.86 3.04 25.2 2.74 2.69 8.98

1215 41.0 4.00 3.00 25.4 2.72 2.74 8.50

970* 40.0 3.80 2.86 25.1 2.84 2.66 8.20

C*9C*C16 FC/MC62D 1445 41.0 4.00 3.00 26.2 2.68 2.86 8.20 C*9C*C16 FC/PC60C

C*9C*C16 UC60C

HC6B042F4(C)

C*9C*C20 FC/MC62D 1445 41.0 4.06 2.96 26.0 2.72 2.80 8.20 C*9C*C20 FC/PC60C

C*9C*C20 UC60

C*9C*D20 FC/MC/PC60D

C*9C*D20 FC/MC62D

C*9C*D20 UC60C

T*(8,L)V*C16 FC64

T*(8,L)V*C20 FC64

T*(8,L)X*C16 FC64

T*(8,L)X*C20 FC/MC62D

T*(8,L)X*C20 FC64

T*9(C,V)*C16 FC64

HC6B048F3(C)

T*9X*C20 FC/MC62D

T*9X*C16 FC64

T*9X*C20 FC64

T*9X*D20 FC64

C*(8,L)C*C16 FC64

C*(8,L)C*C20 FC64

C*9C*C16 FC64

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) enteri ng indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnectin g piping and no supplemental electric heat operation.

3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.

during the same period. — = Not Applicable. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

1235 41.0 4.02 2.99 26.0 2.74 2.78 8.20

1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48

1235 41.0 3.90 3.08 25.6 2.68 2.80 8.20

1020* 40.0 3.82 3.07 25.4 2.72 2.74 8.48

1330 41.5 4.08 2.98 26.0 2.76 2.76 8.20

980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48

1330 41.5 4.02 3.02 25.6 2.70 2.78 8.20

980* 40.0 3.84 3.05 25.4 2.74 2.72 8.48

1225 41.0 4.06 2.96 25.8 2.78 2.72 8.50

1075* 40.0 3.94 2.97 25.4 2.76 2.70 8.98

1455 41.0 4.08 2.94 25.8 2.74 2.76 8.20

1235* 40.0 3.96 2.96 25.6 2.74 2.74 8.98

1225 41.0 3.96 3.03 25.6 2.70 2.78 8.20

1235* 40.0 3.74 2.89 25.3 2.82 2.68 8.50

1635 48.0 3.86 3.87 34.4 2.72 3.71 9.00

1000* 48.0 3.37 4.33 34.4 2.72 3.71 9.00

1630 48.0 3.88 3.85 34.2 2.74 3.66 9.00

1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00

1610 48.0 3.90 3.83 34.2 2.76 3.63 9.00

1000* 48.0 3.41 4.29 34.2 2.76 3.63 9.00

1665 48.0 3.84 3.89 33.8 2.70 3.67 9.00

1200* 48.0 3.43 4.29 33.8 2.70 3.67 9.00

1665 48.0 3.92 3.81 34.0 2.76 3.61 9.00

1200* 48.0 3.51 4.21 34.0 2.76 3.61 9.00

1590 48.0 3.84 3.93 34.4 2.72 3.71 9.00

1000* 48.0 3.35 4.39 34.4 2.72 3.71 9.00

1595 48.0 3.76 3.94 33.6 2.68 3.67 9.00

1200* 48.0 3.35 4.34 33.6 2.68 3.67 9.00

1550 48.0 3.88 3.85 34.2 2.74 3.66 9.00

1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00

1595 48.0 3.92 3.81 34.0 2.76 3.61 9.00

1200* 48.0 3.51 4.21 34.0 2.76 3.61 9.00

1610 48.0 3.88 3.85 34.2 2.74 3.66 9.00

1200* 48.0 3.47 4.25 34.2 2.74 3.66 9.00

1635 48.0 3.86 3.87 34.4 2.72 3.71 9.00

1000* 48.0 3.37 4.33 34.4 2.72 3.71 9.00

1630 48.0 3.88 3.85 34.2 2.74 3.66 9.00

1000* 48.0 3.39 4.31 34.2 2.74 3.66 9.00

1590 48.0 3.84 3.93 34.4 2.72 3.71 9.00

1000* 48.0 3.35 4.39 34.4 2.72 3.71 9.00

18 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING CAPACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

HC6B060F3(C)

For notes, see Page 20.

FURNACE

MODEL

COIL

MODEL

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*C16 FC/MC62D

T*(8,L)V*C16 FC64

T*(8,L)V*C20 FC/MC62D

T*(8,L)V*C20 FC64

T*(8,L)X*C16 FC/MC62D

T*(8,L)X*C16 FC64

T*(8,L)X*C20 FC64

T*9(C,V)*C16 FC/MC62D

T*9(C,V)*C16 FC64

T*9(C,V)*C20 FC/MC62D

T*9(C,V)*C20 FC64

T*9(C,V)*D20 FC/MC62D

T*9(C,V)*D20 FC64

T*9X*C16 FC/MC62D

T*9X*C16 FC64

T*9X*C20 FC64

T*9X*C20 FC/MC62D

HSPF

STAGE

RATED

CFM

HEATING

NET MBH

47 OD 17 OD

1 1025 41.5 – – 3.38 2 1635 58.0 38.5 9.00 3.66 2 1025* 57.5 38.5 9.00 3.20 1 1025 42.5 – – 3.48 2 1635 58.0 38.5 9.00 3.76 2 1025* 58.0 39.0 9.00 3.30 1 1060 42.0 – – 3.38 2 1620 58.0 38.5 9.00 3.68 2 1060* 57.5 38.5 9.00 3.20 1 1060 42.5 – – 3.48 2 1630 58.0 38.5 9.00 3.78 2 1060* 58.0 39.0 9.00 3.30 1 1115 41.5 – – 3.38 2 1610 58.0 38.0 9.00 3.68 2 1115* 57.5 38.5 9.00 3.20 1 1115 42.5 – – 3.48 2 1610 58.0 38.5 9.00 3.80 2 1115* 58.0 39.0 9.00 3.30 1 835 41.0 – – 3.16 2 1665 58.0 38.5 9.00 3.84 2 835* 56.5 39.0 8.75 2.92 1 1040 42.0 – – 3.36 2 1590 58.0 38.5 9.00 3.64 2 1040* 57.5 38.5 9.00 3.20 1 1040 42.5 – – 3.46 2 1590 58.0 38.5 9.00 3.74 2 1040* 58.0 39.0 9.00 3.28 1 1040 42.0 – – 3.36 2 1655 58.0 38.5 9.00 3.62 2 1040* 57.5 38.5 9.00 3.20 1 1040 42.5 – – 3.46 2 1655 58.0 39.0 9.00 3.72 2 1040* 58.0 39.0 9.00 3.28 1 1085 42.0 – – 3.36 2 1630 58.0 38.5 9.00 3.64 2 1085* 57.5 38.5 9.00 3.20 1 1085 42.5 – – 3.46 2 1630 58.0 38.5 9.00 3.74 2 1085* 58.0 39.0 9.00 3.28 1 1085 42.0 – – 3.38 2 1550 58.0 38.5 9.00 3.68 2 1085* 57.5 38.5 9.00 3.20 1 1085 42.5 – – 3.48 2 1550 58.0 38.5 9.00 3.78 2 1085* 58.0 39.0 9.00 3.30 1 1220 42.5 – – 3.60 2 1595 58.0 38.5 9.00 3.78 2 1220* 58.0 39.0 9.00 3.48 1 1220 42.5 – – 3.52 2 1595 58.0 38.0 9.00 3.68 2 1220* 58.0 38.5 9.00 3.38

COP

@ 47

Johnson Controls Unitary Products 19

632152-CTG-E-0812

HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

FURNACE

MODEL

COIL

MODEL

STAGE

RATED

CFM

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

HEATING

NET MBH

47 OD 17 OD

1 1240 42.5 – – 3.54

T*9X*D20 FC/MC62D

2 1610 58.0 38.5 9.00 3.66 2 1240* 58.0 38.5 9.00 3.40 1 1240 42.5 – – 3.64

T*9X*D20 FC64

2 1610 58.0 38.5 9.00 3.76 2 1240* 58.0 39.0 9.00 3.48 1 1025 41.5 – – 3.38

C*(8,L)C*C16 FC/MC62D

2 1635 58.0 38.5 9.00 3.66 2 1025* 57.5 38.5 9.00 3.20 1 1025 42.5 – – 3.48

C*(8,L)C*C16 FC64

2 1635 58.0 38.5 9.00 3.76 2 1025* 58.0 39.0 9.00 3.30 1 1060 42.0 – – 3.38

C*(8,L)C*C20 FC/MC62D

2 1620 58.0 38.5 9.00 3.68 2 1060* 57.5 38.5 9.00 3.20 1 1060 42.5 – – 3.48

C*(8,L)C*C20 FC64

HC6B060F3(C)

C*9C*C16 FC/MC62D

2 1630 58.0 38.5 9.00 3.78 2 1060* 58.0 39.0 9.00 3.30 1 1040 42.0 – – 3.36 2 1590 58.0 38.5 9.00 3.64 2 1040* 57.5 38.5 9.00 3.20 1 1040 42.5 – – 3.46

C*9C*C16 FC64

2 1590 58.0 38.5 9.00 3.74 2 1040* 58.0 39.0 9.00 3.28 1 1040 42.0 – – 3.36

C*9C*C20 FC/MC62D

2 1655 58.0 38.5 9.00 3.62 2 1040* 57.5 38.5 9.00 3.20 1 1040 42.5 – – 3.46

C*9C*C20 FC64

2 1655 58.0 39.0 9.00 3.72 2 1040* 58.0 39.0 9.00 3.28 1 1085 42.0 – – 3.36

C*9C*D20 FC/MC62D

2 1630 58.0 38.5 9.00 3.64 2 1085* 57.5 38.5 9.00 3.20 1 1085 42.5 – – 3.46

C*9C*D20 FC64

2 1630 58.0 38.5 9.00 3.74 2 1085* 58.0 39.0 9.00 3.28

1. Rated CFM same as for cooling.

2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bu lb) entering ind oor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation.

3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.

during the same period. — = Not Applicable. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

HSPF

COP

@ 47

20 Johnson Controls Unitary Products

632152-CTG-E-0812

THERMOSTAT

NEC CLASS 1

WIRING

TO INDOOR BLOWER

NEC CLASS 2 WIRING

TO COIL

WEATHERPROOF

DISCONNECT

SWITCH

24” SERVICE

ACCESS

CLEARANCE

ALL OUTDOOR WIRING MUST BE WEATHERPROOF MINIMUM 24” UNIT TO UNIT CLEARANCE

SEAL OPENINGS WITH PERMAGUM OR EQUIVALENT

60” OVERHEAD CLEARANCE

10” CLEARANCE AROUND PERIMETER

NOTES:

ACCESSORIES

TXV Kits - S1-1TVM series thermal expansion valves precisely

meter refrigerant for optimum performance over a wide range of conditions. See System Charge table for TXV part number for each model.

Start Assist Kit (S1-2SA067) - Provides increased starting torque for areas with low voltage. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.

Temperature Sensor (S1-37309243000) - The temperature sensor is used to sense plenum temperature, and i s optional

Dehumidistat (S1-2HU16700124) - Provides increased dehumidification when matched with variable speed furnace or air handler.

Heat Pump Risers (S1-52635389000, S1-52635390000, S1-52635391000) - 3", 6", or 12" risers mount easily in compos-

ite base pan recesses, ensuring the unit stays clear of snow and ice build-up in harsh winter weather.

Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance, these outdoor units are fully compatiable with the Residential Touch Screen Communicating Control S1-TTSCC01.

with a gas or oil back-up heat source. Compatible only with 13 SEER and higher heat pumps.

SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment)

Size Test Condition 63 125 250 500 1000 2000 4000 8000 dBA SQI

Cooling Mode 72 76 69 67 67 62 58 53 71 19.1

Heating Mode 71 79 70 68 67 62 58 55 71 19.0 Cooling Mode 73 70 67 68 69 61 55 48 71 19.1

Heating Mode 76 72 69 69 66 61 57 60 71 19.1 Cooling Mode 75 79 70 69 67 61 56 49 72 19.1

Heating Mode 71 80 64 61 62 58 54 53 68 19.0 Cooling Mode 70 69 72 68 68 60 55 47 71 19.0

Heating Mode 70 71 72 67 64 60 55 48 70 19.2 Cooling Mode 77 78 72 70 66 61 56 50 72 19.1

Heating Mode 75 82 73 72 66 61 58 54 73 19.1 Cooling Mode - Stage 1 75 75 70 68 64 61 56 50 70 19.2

Heating Mode - Stage 1 75 76 69 68 66 60 56 51 70 19.1 Cooling Mode - Stage 2 73 78 69 68 64 61 56 50 70 19.2

Heating Mode - Stage 2 72 81 70 69 66 63 58 51 72 19.2

Rated in accordance with ARI Standard 270.

TYPICAL INSTALLATION

Johnson Controls Unitary Products 21

632152-CTG-E-0812

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B024F3(C) INDOOR COIL MODEL NO. AHX30

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

– FC/MC/PC32 0.97 0.95 1.08 – – – AHE24B – 1.00 0.98 0.99 AHE30B – 1.00 0.98 0.99 AHR24B – 0.97 0.93 1.03 AHV24B – 0.97 0.93 0.97 AHV30B – 0.99 0.96 0.99 AHV36C – 1.00 0.97 0.97 AV*36 – 0.99 0.96 0.96 MV12B FC/MC35B 1.00 0.97 0.98 MV12B FC/MC43B 1.01 0.99 0.98 MX12B FC/MC35B 1.00 0.98 0.95 MX12B FC/MC43B 0.99 0.96 0.96

Continued on next page.

ID CFM 635 835 1035

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 21.7 24.2 24.1 26.2 28.4 23.9 25.3 25.2 27.3 29.5 26.1 26.4 26.3 28.5 30.5 S.C. 21.7 20.6 17.8 17.8 14.8 23.9 23.6 19.7 19.6 15.7 26.1 26.4 21.7 21.4 16.6 K.W. 1.19 1.19 1.19 1.19 1.19 1.26 1.26 1.27 1.27 1.27 1.34 1.34 1.34 1.35 1.35

T.C. 21.2 23.2 23.1 25.1 27.2 23.1 24.2 24.0 26.1 28.2 25.1 25.1 25.0 27.2 29.3 S.C. 21.2 20.1 17.3 17.3 14.4 23.1 22.8 19.2 19.1 15.3 25.1 25.1 21.2 20.9 16.2 K.W. 1.36 1.36 1.36 1.36 1.37 1.43 1.44 1.44 1.44 1.45 1.51 1.51 1.51 1.52 1.53

T.C. 20.6 22.1 22.1 24.0 26.0 22.3 23.0 22.9 24.9 27.0 24.1 23.9 23.8 25.9 28.0 S.C. 20.6 19.6 16.8 16.8 13.9 22.3 22.0 18.8 18.6 14.9 24.1 23.9 20.7 20.4 15.8 K.W. 1.52 1.53 1.53 1.54 1.55 1.61 1.61 1.61 1.62 1.63 1.69 1.69 1.69 1.70 1.71

T.C. 20.0 21.1 21.0 23.0 24.8 21.5 21.9 21.8 23.8 25.7 23.1 22.6 22.5 24.5 26.7 S.C. 20.0 19.2 16.4 16.3 13.4 21.5 21.3 18.3 18.1 14.4 23.1 22.6 20.2 19.8 15.4 K.W. 1.69 1.70 1.70 1.71 1.72 1.78 1.78 1.78 1.79 1.81 1.86 1.86 1.86 1.87 1.89

T.C. 19.1 19.8 19.8 21.6 23.4 20.5 20.7 20.4 22.3 24.1 21.8 21.6 21.1 23.0 24.9 S.C. 19.1 18.6 15.8 15.7 12.8 20.5 20.5 17.7 17.5 13.7 21.8 21.6 19.6 19.3 14.7 K.W. 1.90 1.90 1.90 1.92 1.93 1.98 1.99 1.98 2.00 2.01 2.07 2.07 2.06 2.08 2.10

T.C. 18.1 18.6 18.6 20.3 21.9 19.4 19.6 19.1 20.8 22.5 20.6 20.6 19.6 21.4 23.1 S.C. 18.1 18.1 15.3 15.0 12.2 19.4 19.6 17.1 16.9 13.1 20.6 20.6 19.0 18.7 13.9 K.W. 2.11 2.11 2.11 2.12 2.14 2.19 2.19 2.19 2.20 2.22 2.28 2.28 2.27 2.29 2.30

T.C. 17.2 17.3 17.4 18.9 20.5 18.3 18.5 17.8 19.4 20.9 19.4 19.6 18.2 19.8 21.4 S.C. 17.2 17.3 14.8 14.4 11.6 18.3 18.5 16.6 16.3 12.4 19.4 19.6 18.2 18.2 13.2 K.W. 2.32 2.31 2.32 2.33 2.34 2.40 2.40 2.39 2.41 2.43 2.49 2.49 2.47 2.49 2.51

T.C. S.C. KW

FC/MC/PC35 0.97 0.95 1.08 FC/MC/PC37 0.98 0.97 1.08 FC/MC/PC43 0.98 0.97 1.08

22 Johnson Controls Unitary Products

632152-CTG-E-0812

Furnace Coil

T*(8,L)V*A12 FC/MC/PC32A 0.99 0.95 0.99 T*(8,L)V*A12 FC/MC/PC37A 1.01 0.99 0.99 T*(8,L)V*B12 FC/MC/PC35B 1.00 0.97 0.98 T*(8,L)V*B12 FC/MC/PC43B 1.01 0.99 0.98 T*(8,L)V*C16 FC/MC/PC35C 1.00 0.97 0.97 T*(8,L)V*C16 FC/MC/PC43C 1.01 0.99 0.97 T*(8,L)V*C20 FC/MC/PC35C 0.99 0.96 0.97 T*(8,L)V*C20 FC/MC/PC43C 0.99 0.96 0.96 T*(8,L)X*A12 FC/MC/PC32A 1.00 0.98 0.96 T*(8,L)X*A12 FC/MC/PC37A 1.02 1.03 0.96 T*(8,L)X*B12 FC/MC/PC35B 1.01 1.02 0.96 T*(8,L)X*B12 FC/MC/PC43B 1.03 1.04 0.96 T*(8,L)X*C16 FC/MC/PC35C 1.02 1.03 0.97 T*(8,L)X*C16 FC/MC/PC43C 1.02 1.04 0.96 T*(8,L)X*C20 FC/MC/PC35C 1.01 1.03 0.98 T*(8,L)X*C20 FC/MC/PC43C 1.01 0.99 0.97 T*9(C,V)*B12 FC/MC/PC35B 0.99 0.97 1.00 T*9(C,V)*B12 FC/MC/PC43B 1.01 0.99 1.00 T*9(C,V)*C16 FC/MC/PC35C 1.01 1.03 0.99 T*9(C,V)*C16 FC/MC/PC43C 1.01 0.99 0.99 T*9(C,V)*C20 FC/MC/PC35C 0.99 0.96 0.97 T*9(C,V)*C20 FC/MC/PC43C 1.02 1.05 0.99 T*9V*A10 FC/MC/PC32A 0.98 0.96 1.03

T.C. S.C. KW

Furnace Coil

T*9V*A10 FC/MC/PC37A 0.99 0.98 1.03 T*9X*A10 FC/MC/PC32A 0.98 0.94 1.01 T*9X*A10 FC/MC/PC37A 0.98 0.95 1.00 T*9X*B12 FC/MC/PC35B 1.00 0.98 0.96 T*9X*B12 FC/MC/PC43B 1.01 0.99 0.96 T*9X*C16 FC/MC/PC35C 1.00 0.98 0.96 T*9X*C16 FC/MC/PC43C 1.01 0.99 0.96 T*9X*C20 FC/MC/PC35C 1.00 0.97 0.97 T*9X*C20 FC/MC/PC43C 1.01 0.99 0.97 C*(8,L)C*A12 FC/MC/PC32A 0.99 0.95 0.99 C*(8,L)C*A12 FC/MC/PC37A 1.01 0.99 0.99 C*(8,L)C*B12 FC/MC/PC35B 1.00 0.97 0.98 C*(8,L)C*B12 FC/MC/PC43B 1.01 0.99 0.98 C*(8,L)C*C16 FC/MC/PC35C 1.00 0.97 0.97 C*(8,L)C*C16 FC/MC/PC43C 1.01 0.99 0.97 C*(8,L)C*C20 FC/MC/PC35C 0.99 0.96 0.97 C*(8,L)C*C20 FC/MC/PC43C 0.99 0.96 0.96 C*9C*B12 FC/MC/PC35B 0.99 0.97 1.00 C*9C*B12 FC/MC/PC43B 1.01 0.99 1.00 C*9C*C16 FC/MC/PC35C 1.01 1.03 0.99 C*9C*C16 FC/MC/PC43C 1.01 0.99 0.99 C*9C*C20 FC/MC/PC35C 0.99 0.96 0.97 C*9C*C20 FC/MC/PC43C 1.02 1.05 0.99

T.C. S.C. KW

Johnson Controls Unitary Products 23

632152-CTG-E-0812

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B030F3(C) INDOOR COIL MODEL NO. AHX36

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

– FC/MC/PC37 0.97 0.97 1.10 – AHE36C – 0.99 1.00 1.00 AHR36B – 0.98 1.00 1.11 AHV36C – 0.97 0.95 0.99 AV*36 – 0.99 0.99 1.00 MV12B FC/MC43B 0.99 1.00 1.02 MV16C FC/MC43C 0.99 1.00 1.02 MX12B FC/MC43B 1.01 1.04 1.03 MX16C FC/MC43C 0.99 1.00 0.99

ID CFM 805 1005 1205

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 27.5 29.6 29.7 32.4 35.6 29.4 30.7 30.7 33.7 36.7 31.4 31.8 31.8 35.0 37.9 S.C. 27.5 25.6 22.0 21.8 17.9 29.4 28.8 24.1 23.9 19.1 31.4 31.8 26.2 26.0 20.4 K.W. 1.49 1.49 1.49 1.49 1.48 1.56 1.56 1.57 1.56 1.55 1.63 1.63 1.64 1.63 1.62

T.C. 26.5 28.3 28.3 31.0 34.0 28.4 29.3 29.3 32.1 35.1 30.2 30.3 30.3 33.3 36.2 S.C. 26.5 25.0 21.4 21.2 17.3 28.4 27.9 23.5 23.2 18.5 30.2 30.3 25.6 25.3 19.7 K.W. 1.67 1.67 1.67 1.67 1.67 1.74 1.74 1.75 1.74 1.74 1.82 1.82 1.82 1.82 1.81

T.C. 25.5 27.0 27.0 29.6 32.5 27.3 27.9 27.9 30.6 33.5 29.1 28.8 28.7 31.5 34.5 S.C. 25.5 24.4 20.8 20.6 16.7 27.3 26.9 22.8 22.6 17.9 29.1 28.8 24.9 24.6 19.1 K.W. 1.85 1.85 1.85 1.85 1.86 1.93 1.93 1.92 1.93 1.93 2.01 2.00 2.00 2.00 2.00

T.C. 24.5 25.7 25.7 28.2 31.0 26.2 26.5 26.4 29.0 31.9 27.9 27.3 27.2 29.7 32.8 S.C. 24.5 23.8 20.1 19.9 16.1 26.2 25.9 22.2 21.9 17.2 27.9 27.3 24.3 23.9 18.4 K.W. 2.03 2.03 2.03 2.03 2.04 2.11 2.11 2.10 2.11 2.11 2.19 2.18 2.18 2.18 2.18

T.C. 23.2 24.0 24.0 26.4 29.0 24.7 25.0 24.7 27.1 29.7 26.2 25.9 25.3 27.7 30.5 S.C. 23.2 23.0 19.4 19.2 15.3 24.7 24.8 21.5 21.2 16.4 26.2 25.9 23.5 23.1 17.6 K.W. 2.27 2.27 2.27 2.27 2.28 2.35 2.34 2.34 2.34 2.35 2.42 2.42 2.42 2.42 2.42

T.C. 22.0 22.3 22.4 24.6 27.0 23.3 23.4 22.9 25.1 27.6 24.5 24.5 23.4 25.7 28.2 S.C. 22.0 22.3 18.7 18.4 14.5 23.3 23.4 20.7 20.4 15.6 24.5 24.5 22.7 22.4 16.7 K.W. 2.51 2.51 2.51 2.51 2.51 2.58 2.58 2.58 2.58 2.58 2.66 2.66 2.66 2.65 2.66

T.C. 20.7 20.6 20.7 22.7 25.0 21.8 21.9 21.1 23.2 25.4 22.9 23.1 21.6 23.7 25.9 S.C. 20.7 20.6 17.9 17.7 13.8 21.8 21.9 19.9 19.6 14.8 22.9 23.1 21.6 21.6 15.8 K.W. 2.75 2.74 2.74 2.74 2.74 2.82 2.82 2.82 2.82 2.82 2.89 2.89 2.89 2.89 2.89

T.C. S.C. KW

FC/MC/PC43 0.97 0.97 1.10

Furnace Coil

T*(8,L)V*A12 FC/MC/PC37A 0.98 0.96 1.04 T*(8,L)V*B12 FC/MC/PC43B 0.99 1.00 1.05 T*(8,L)V*C16 FC/MC/PC43C 1.00 1.01 1.02 T*(8,L)V*C20 FC/MC/PC43C 1.00 1.01 1.00 T*(8,L)X*A12 FC/MC/PC37A 1.01 1.04 1.03 T*(8,L)X*B12 FC/MC/PC43B 1.01 1.05 1.03 T*(8,L)X*C16 FC/MC/PC43C 0.99 0.98 0.99 T*(8,L)X*C20 FC/MC/PC43C 0.98 0.95 0.99 T*9(C,V)*B12 FC/MC/PC43B 0.99 1.00 1.05 T*9(C,V)*C16 FC/MC/PC43C 0.99 1.00 1.04 T*9(C,V)*C20 FC/MC/PC43C 0.99 1.00 1.02 T*9X*B12 FC/MC/PC43B 1.00 1.04 1.03 T*9X*C16 FC/MC/PC43C 0.99 1.02 1.01 C*(8,L)C*A12 FC/MC/PC37A 0.98 0.96 1.04 C*(8,L)C*B12 FC/MC/PC43B 0.99 1.00 1.05 C*(8,L)C*C16 FC/MC/PC43C 1.00 1.01 1.02 C*(8,L)C*C20 FC/MC/PC43C 1.00 1.01 1.00 C*9C*B12 FC/MC/PC43B 0.99 1.00 1.05 C*9C*C16 FC/MC/PC43C 0.99 1.00 1.04 C*9C*C20 FC/MC/PC43C 0.99 1.00 1.02

T.C. S.C. KW

24 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B036F3(C) INDOOR COIL MODEL NO. AHX42

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature

Air Handler Coil

– FC/MC/PC48 0.97 0.97 1.00 – – – AHE42D – 0.99 1.08 0.92 AHE48D – 0.99 1.08 0.91 AHR42C – 0.98 1.08 1.00 AHV42D – 0.99 1.08 0.92 AHV48D – 0.99 1.06 0.91 AV*48 – 1.01 1.11 0.92 MV12D FC/MC48D 1.00 1.08 0.91 MV12D FC/MC60D 0.99 1.07 0.93 MV16C FC/MC48C 0.99 1.08 0.93 MX12D FC/MC48D 0.99 1.08 0.93 MX12D FC/MC60D 1.01 1.13 0.93 MX16C FC/MC48C 1.00 1.08 0.91

Continued on next page.

ID CFM 1000 1200 1400

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 34.1 36.2 36.4 39.6 43.0 36.1 37.4 37.5 40.8 44.1 38.1 38.5 38.5 42.0 45.3 S.C. 34.1 31.2 26.9 26.6 21.7 36.1 34.5 28.9 28.5 22.8 38.1 37.8 30.9 30.3 23.9 K.W. 1.93 1.93 1.94 1.94 1.95 2.01 2.02 2.02 2.03 2.04 2.10 2.10 2.10 2.13 2.12

T.C. 32.9 34.7 34.8 38.0 41.2 34.8 35.7 35.7 38.9 42.2 36.6 36.6 36.7 39.9 43.3 S.C. 32.9 30.5 26.1 25.8 21.0 34.8 33.4 28.1 27.7 22.1 36.6 36.3 30.1 29.6 23.1 K.W. 2.20 2.20 2.20 2.21 2.23 2.29 2.29 2.29 2.30 2.32 2.37 2.37 2.37 2.39 2.41

T.C. 31.8 33.1 33.2 36.3 39.4 33.5 34.0 34.0 37.1 40.3 35.2 34.8 34.8 37.8 41.2 S.C. 31.8 29.8 25.4 25.1 20.3 33.5 32.3 27.4 27.0 21.3 35.2 34.7 29.4 28.9 22.4 K.W. 2.47 2.47 2.47 2.49 2.51 2.56 2.56 2.56 2.57 2.60 2.65 2.64 2.65 2.65 2.69

T.C. 30.6 31.5 31.6 34.6 37.6 32.1 32.3 32.3 35.2 38.4 33.7 33.0 33.0 35.8 39.2 S.C. 30.6 29.1 24.6 24.3 19.6 32.1 31.1 26.6 26.2 20.6 33.7 33.0 28.7 28.2 21.6 K.W. 2.74 2.74 2.74 2.77 2.79 2.83 2.83 2.83 2.84 2.89 2.92 2.91 2.92 2.90 2.98

T.C. 29.0 29.3 29.6 32.4 35.3 30.4 30.4 30.1 32.9 35.9 31.7 31.4 30.6 33.4 36.5 S.C. 29.0 28.2 23.7 23.4 18.6 30.4 29.9 25.7 25.3 19.7 31.7 31.4 27.7 27.2 20.7 K.W. 3.06 3.05 3.07 3.05 3.07 3.13 3.12 3.15 3.12 3.16 3.20 3.20 3.23 3.20 3.25

T.C. 27.4 27.2 27.6 30.2 33.0 28.6 28.5 27.9 30.6 33.4 29.8 29.8 28.2 31.0 33.9 S.C. 27.4 27.2 22.8 22.5 17.6 28.6 28.5 24.8 24.4 18.7 29.8 29.8 26.7 26.3 19.7 K.W. 3.38 3.35 3.40 3.32 3.34 3.43 3.42 3.47 3.41 3.43 3.49 3.49 3.54 3.50 3.52

T.C. 25.9 25.0 25.6 28.0 30.7 26.9 26.6 25.7 28.4 30.9 27.9 28.2 25.8 28.7 31.2 S.C. 25.9 25.0 21.9 21.6 16.7 26.9 26.6 23.8 23.5 17.7 27.9 28.2 25.8 25.4 18.8 K.W. 3.70 3.65 3.73 3.60 3.62 3.73 3.71 3.79 3.70 3.70 3.77 3.77 3.85 3.79 3.79

T.C. S.C. KW

FC/MC/PC60 0.98 0.98 1.01 UC48 0.98 0.98 1.00 UC60 0.97 0.96 1.00

Johnson Controls Unitary Products 25

632152-CTG-E-0812

Furnace Coil

T*(8,L)V*C16 FC/MC/PC48C 0.99 0.99 0.93 T*(8,L)V*C16 FC/PC60C 1.01 1.01 0.93 T*(8,L)V*C16 UC48C 1.00 1.00 0.94 T*(8,L)V*C16 UC60C 0.99 0.98 0.93 T*(8,L)V*C20 FC/MC/PC48C 0.99 0.99 0.93 T*(8,L)V*C20 FC/PC60C 1.00 1.00 0.94 T*(8,L)V*C20 UC48C 1.00 1.00 0.93 T*(8,L)V*C20 UC60C 0.98 0.98 0.93 T*(8,L)X*C16 FC/MC/PC48C 1.00 1.00 0.91 T*(8,L)X*C16 FC/PC60C 1.01 1.01 0.91 T*(8,L)X*C16 UC48C 1.01 1.01 0.91 T*(8,L)X*C16 UC60C 0.99 0.99 0.91 T*(8,L)X*C20 FC/MC/PC48C 1.01 1.03 0.92 T*(8,L)X*C20 FC/PC60C 1.01 1.05 0.93 T*(8,L)X*C20 UC48C 1.01 1.04 0.93 T*(8,L)X*C20 UC60C 1.00 1.02 0.93 T*9(C,V)*D20 FC/MC/PC48D 0.99 0.99 0.94 T*9(C,V)*D20 FC/MC/PC60D 1.00 1.00 0.94 T*9X*C16 FC/MC/PC48C 1.01 1.03 0.95 T*9X*C16 FC/PC60C 1.01 1.05 0.94

T.C. S.C. KW

Furnace Coil

T*9X*C16 UC48C 1.01 1.03 0.95 T*9X*C16 UC60C 0.99 1.04 0.94 T*9X*C20 FC/MC/PC48C 0.99 0.99 0.93 T*9X*C20 FC/PC60C 1.00 1.00 0.92 T*9X*C20 UC48C 1.00 1.00 0.93 T*9X*C20 UC60C 0.99 0.98 0.93 T*9X*D20 FC/MC/PC48D 0.99 0.99 0.93 T*9X*D20 FC/MC/PC60D 1.02 1.06 0.92 T*9X*D20 UC48D 1.00 1.00 0.92 T*9X*D20 UC60D 1.00 1.04 0.92 C*(8,L)C*C16 FC/MC/PC48C 0.99 0.99 0.93 C*(8,L)C*C16 FC/PC60C 1.01 1.01 0.93 C*(8,L)C*C16 UC48C 1.00 1.00 0.94 C*(8,L)C*C16 UC60C 0.99 0.98 0.93 C*(8,L)C*C20 FC/MC/PC48C 0.99 0.99 0.93 C*(8,L)C*C20 FC/PC60C 1.00 1.00 0.94 C*(8,L)C*C20 UC48C 1.00 1.00 0.93 C*(8,L)C*C20 UC60C 0.98 0.98 0.93 C*9C*D20 FC/MC/PC48D 0.99 0.99 0.94 C*9C*D20 FC/MC/PC60D 1.00 1.00 0.94

T.C. S.C. KW

26 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B042F4(C) INDOOR COIL MODEL NO. AHE60

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

– FC/MC/PC60 0.96 0.94 1.06 – – AHE48D – 0.98 0.98 0.98 AHE60D – 1.00 1.00 1.00 AHR60D – 0.97 0.98 1.07 AHV48D – 0.98 0.96 0.98 AHV60D – 0.98 1.00 1.02 AV*48 – 1.00 1.00 0.98 MV16C FC60C 0.98 0.98 0.99 MV20D FC/MC60D 1.00 1.02 0.99 MV20D FC/MC62D 1.00 1.00 1.03 MX16C FC60C 0.98 0.99 0.97 MX20D FC/MC60D 1.01 1.03 0.98 MX20D FC/MC62D 1.01 1.05 1.01

Continued on next page.

ID CFM 1185 1385 1585

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 39.3 41.5 41.5 45.3 49.4 41.1 42.5 42.5 46.4 50.6 42.9 43.5 43.5 47.5 51.8 S.C. 37.4 34.6 29.5 29.1 23.2 39.1 38.0 31.5 31.1 24.4 40.7 41.4 33.5 33.1 25.6 K.W. 2.22 2.22 2.23 2.26 2.31 2.31 2.30 2.30 2.36 2.39 2.40 2.37 2.38 2.45 2.47

T.C. 37.9 39.6 39.6 43.4 47.3 39.6 40.5 40.5 44.3 48.4 41.3 41.4 41.4 45.3 49.4 S.C. 36.1 33.8 28.7 28.4 22.5 37.7 36.6 30.7 30.3 23.6 39.3 39.3 32.7 32.2 24.8 K.W. 2.52 2.53 2.53 2.55 2.56 2.60 2.61 2.61 2.62 2.65 2.68 2.69 2.69 2.70 2.73

T.C. 36.5 37.7 37.8 41.5 45.3 38.2 38.5 38.5 42.3 46.2 39.8 39.3 39.3 43.0 47.0 S.C. 34.7 33.1 27.9 27.6 21.8 36.3 35.2 29.9 29.5 22.9 37.8 37.3 31.9 31.4 24.0 K.W. 2.83 2.84 2.84 2.83 2.82 2.90 2.92 2.92 2.89 2.90 2.97 3.00 3.00 2.95 2.98

T.C. 35.1 35.9 35.9 39.6 43.3 36.7 36.5 36.6 40.2 44.0 38.2 37.1 37.3 40.8 44.6 S.C. 33.4 32.3 27.1 26.8 21.1 34.9 33.8 29.1 28.7 22.1 36.3 35.3 31.0 30.5 23.1 K.W. 3.13 3.15 3.14 3.11 3.08 3.19 3.23 3.22 3.16 3.16 3.25 3.31 3.31 3.21 3.24

T.C. 33.4 33.6 33.6 37.0 40.4 34.8 34.6 34.2 37.5 41.1 36.1 35.6 34.8 38.1 41.7 S.C. 31.8 31.0 26.1 25.8 20.1 33.1 32.4 28.1 27.7 21.1 34.3 33.8 30.0 29.5 22.2 K.W. 3.44 3.45 3.44 3.45 3.45 3.51 3.53 3.52 3.51 3.53 3.59 3.61 3.61 3.57 3.61

T.C. 31.7 31.3 31.4 34.4 37.6 32.9 32.7 31.8 34.9 38.2 34.0 34.0 32.3 35.4 38.7 S.C. 30.1 29.8 25.2 24.8 19.1 31.2 31.0 27.1 26.7 20.1 32.4 32.3 29.0 28.5 21.2 K.W. 3.75 3.74 3.74 3.78 3.82 3.84 3.83 3.82 3.86 3.90 3.92 3.92 3.90 3.94 3.98

T.C. 30.0 29.1 29.2 31.8 34.8 31.0 30.7 29.5 32.3 35.3 31.9 32.4 29.8 32.7 35.8 S.C. 28.5 28.5 24.3 23.8 18.1 29.4 29.7 26.1 25.7 19.1 30.4 30.8 28.0 27.5 20.2 K.W. 4.06 4.04 4.04 4.12 4.18 4.16 4.14 4.12 4.21 4.27 4.26 4.23 4.20 4.31 4.35

T.C. S.C. KW

FC/MC62 0.97 0.98 1.09 UC60 0.96 0.95 1.06

Johnson Controls Unitary Products 27

632152-CTG-E-0812

Furnace Coil

T*(8,L)V*C16 FC/MC62D 1.00 1.02 1.06 T*(8,L)V*C16 FC/PC60C 0.97 0.96 0.98 T*(8,L)V*C16 UC60C 0.97 0.97 0.98 T*(8,L)V*C20 FC/MC62D 0.98 0.99 1.03 T*(8,L)V*C20 FC/PC60C 0.98 0.99 0.99 T*(8,L)V*C20 UC60C 0.97 0.97 0.99 T*(8,L)X*C16 FC/MC62D 1.00 1.00 1.01 T*(8,L)X*C16 FC/PC60C 0.98 0.96 0.97 T*(8,L)X*C16 UC60C 0.98 0.98 0.97 T*(8,L)X*C20 FC/MC62D 1.01 1.05 1.03 T*(8,L)X*C20 FC/PC60C 1.00 1.02 0.99 T*(8,L)X*C20 UC60C 1.00 1.00 0.99 T*9(C,V)*C16 FC/MC62D 0.98 1.01 1.07 T*9(C,V)*C16 FC/PC60C 1.00 1.00 1.03 T*9(C,V)*C16 UC60C 0.97 0.96 1.02 T*9(C,V)*C20 FC/MC62D 1.00 1.03 1.06 T*9(C,V)*C20 FC/PC60C 1.01 1.03 1.03 T*9(C,V)*C20 UC60C 0.98 1.01 1.02 T*9(C,V)*D20 FC/MC/PC60D 0.98 0.99 1.00 T*9(C,V)*D20 FC/MC62D 1.00 1.03 1.05 T*9(C,V)*D20 UC60D 0.97 0.97 1.00 T*9X*C16 FC/MC62D 1.00 1.04 1.03 T*9X*C16 FC/PC60C 1.01 1.03 1.01

T.C. S.C. KW

Furnace Coil

T*9X*C16 UC60C 0.98 1.01 1.00 T*9X*C20 FC/MC62D 1.01 1.04 1.03 T*9X*C20 FC/PC60C 1.00 1.00 0.99 T*9X*C20 UC60C 0.97 0.97 0.98 T*9X*D20 FC/MC/PC60D 1.01 1.04 0.98 T*9X*D20 FC/MC62D 1.00 1.03 1.02 T*9X*D20 UC60D 1.00 1.02 0.99 C*(8,L)C*C16 FC/MC62D 1.00 1.02 1.06 C*(8,L)C*C16 FC/PC60C 0.97 0.96 0.98 C*(8,L)C*C16 UC60C 0.97 0.97 0.98 C*(8,L)C*C20 FC/MC62D 0.98 0.99 1.03 C*(8,L)C*C20 FC/PC60C 0.98 0.99 0.99 C*(8,L)C*C20 UC60C 0.97 0.97 0.99 C*9C*C16 FC/MC62D 0.98 1.01 1.07 C*9C*C16 FC/PC60C 1.00 1.00 1.03 C*9C*C16 UC60C 0.97 0.96 1.02 C*9C*C20 FC/MC62D 1.00 1.03 1.06 C*9C*C20 FC/PC60C 1.01 1.03 1.03 C*9C*C20 UC60C 0.98 1.01 1.02 C*9C*D20 FC/MC/PC60D 0.98 0.99 1.00 C*9C*D20 FC/MC62D 1.00 1.03 1.05 C*9C*D20 UC60D 0.97 0.97 1.00

T.C. S.C. KW

28 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B048F3(C) INDOOR COIL MODEL NO. AHX60

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

– FC/MC62 0.99 0.98 1.01 – AHE60D – 1.00 1.23 1.00 AHR60D – 0.98 1.22 1.05 AHV60D – 1.01 1.01 1.01 MV20D FC/MC62D 1.00 1.00 0.96 MV20D FC64 0.96 0.95 0.96 MX20D FC/MC62D 0.99 0.99 0.94 MX20D FC64 0.96 0.95 0.99

ID CFM 1400 1600 1800

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 45.7 48.6 48.5 52.9 58.0 47.6 49.7 49.6 54.2 59.4 49.4 50.9 50.8 55.5 60.7 S.C. 45.7 42.2 36.3 35.9 29.9 47.6 45.2 38.3 37.9 30.9 49.4 48.1 40.3 39.9 32.0 K.W. 2.57 2.58 2.58 2.59 2.62 2.65 2.66 2.66 2.67 2.71 2.73 2.73 2.73 2.75 2.79

T.C. 44.1 46.4 46.3 50.6 55.4 45.8 47.4 47.4 51.7 56.6 47.6 48.4 48.4 52.9 57.8 S.C. 44.1 41.4 35.3 35.0 28.7 45.8 44.1 37.3 36.9 29.8 47.6 46.9 39.3 38.8 30.8 K.W. 2.90 2.91 2.91 2.92 2.95 2.98 2.98 2.98 3.00 3.04 3.06 3.06 3.06 3.08 3.12

T.C. 42.5 44.3 44.2 48.3 52.8 44.1 45.1 45.1 49.3 53.8 45.7 45.9 45.9 50.3 54.8 S.C. 42.5 40.5 34.3 34.0 27.5 44.1 43.0 36.3 35.9 28.6 45.7 45.6 38.3 37.8 29.6 K.W. 3.23 3.24 3.24 3.26 3.29 3.31 3.31 3.31 3.34 3.37 3.39 3.39 3.39 3.42 3.45

T.C. 40.9 42.1 42.1 45.9 50.2 42.4 42.7 42.8 46.8 51.0 43.9 43.4 43.5 47.7 51.9 S.C. 40.9 39.6 33.4 33.0 26.3 42.4 42.0 35.3 34.9 27.4 43.9 43.4 37.3 36.7 28.4 K.W. 3.56 3.56 3.56 3.59 3.62 3.64 3.64 3.64 3.67 3.70 3.73 3.72 3.72 3.75 3.79

T.C. 38.2 38.6 38.6 42.6 46.5 39.6 39.6 39.2 43.1 47.2 41.0 40.6 39.7 43.6 48.0 S.C. 38.2 37.7 31.8 31.6 24.8 39.6 39.6 33.8 33.4 25.9 41.0 40.6 35.8 35.2 27.0 K.W. 3.96 3.96 3.96 4.00 4.03 4.05 4.04 4.04 4.07 4.11 4.13 4.13 4.12 4.15 4.19

T.C. 35.6 35.1 35.0 39.3 42.8 36.8 36.4 35.5 39.4 43.4 38.0 37.7 36.0 39.6 44.1 S.C. 35.6 35.1 30.3 30.2 23.3 36.8 36.4 32.3 32.0 24.4 38.0 37.7 34.3 33.8 25.6 K.W. 4.36 4.36 4.36 4.40 4.44 4.45 4.45 4.44 4.48 4.52 4.54 4.54 4.52 4.55 4.60

T.C. 32.9 31.6 31.5 36.0 39.1 34.0 33.3 31.9 35.8 39.6 35.1 34.9 32.3 35.5 40.2 S.C. 32.9 31.6 28.8 28.8 21.8 34.0 33.3 30.8 30.6 22.9 35.1 34.9 32.3 32.3 24.1 K.W. 4.77 4.76 4.75 4.81 4.84 4.86 4.85 4.83 4.88 4.93 4.95 4.94 4.92 4.95 5.01

T.C. S.C. KW

FC64 1.01 1.02 1.01

Furnace Coil

T*(8,L)V*C16 FC64 1.03 1.04 0.99 T*(8,L)V*C20 FC64 1.03 1.05 0.98 T*(8,L)X*C16 FC64 1.03 1.05 0.97 T*(8,L)X*C20 FC/MC62D 1.01 1.02 0.97 T*(8,L)X*C20 FC64 1.04 1.05 0.97 T*9(C,V)*C16 FC64 1.03 1.04 0.99 T*9X*C16 FC64 1.03 1.05 0.98 T*9X*C20 FC/MC62D 0.99 0.99 0.96 T*9X*C20 FC64 1.03 1.05 0.97 T*9X*D20 FC64 1.03 1.05 0.98 C*(8,L)C*C16 FC64 1.03 1.04 0.99 C*(8,L)C*C20 FC64 1.03 1.05 0.98 C*9C*C16 FC64 1.03 1.04 0.99

T.C. S.C. KW

Johnson Controls Unitary Products 29

632152-CTG-E-0812

COOLING PERFORMANCE DATA - HIGH CFM 2-STA GE OPERATION

OUTDOOR UNIT MODEL NO. HC6B060F3(C) INDOOR COIL MODEL NO. AHX60

CONDENSER

ENTERING AIR

TEMPERATURE

105

115

125

NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed

temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

ID CFM 1730 1930 2130

ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80

ID WB (°F) 57 62 62 67 72 57 62 62 67 57 62 62 67 72 57

T.C. 56.5 59.8 59.9 65.4 70.1 58.4 60.9 60.8 66.6 71.7 60.4 62.0 61.7 67.8 73.3 S.C. 56.5 50.7 43.5 43.0 35.1 58.4 53.4 45.4 44.8 36.3 60.4 56.1 47.3 46.7 37.5 K.W. 3.50 3.54 3.54 3.62 3.71 3.60 3.64 3.63 3.71 3.81 3.71 3.73 3.73 3.80 3.92

T.C. 54.3 56.8 56.9 62.1 67.1 56.0 57.8 57.7 63.2 68.3 57.8 58.8 58.5 64.2 69.6 S.C. 54.3 49.5 42.2 41.6 33.7 56.0 52.1 44.1 43.5 34.8 57.8 54.8 45.9 45.4 35.9 K.W. 3.90 3.94 3.93 4.01 4.11 4.00 4.03 4.03 4.10 4.20 4.11 4.12 4.12 4.19 4.30

T.C. 52.0 53.8 53.9 58.9 64.0 53.6 54.7 54.7 59.7 64.9 55.2 55.5 55.4 60.6 65.8 S.C. 52.0 48.2 40.9 40.3 32.3 53.6 50.8 42.7 42.2 33.3 55.2 53.5 44.6 44.0 34.4 K.W. 4.30 4.33 4.33 4.40 4.50 4.40 4.42 4.42 4.50 4.59 4.50 4.51 4.51 4.59 4.69

T.C. 49.8 50.8 50.9 55.6 60.9 51.2 51.5 51.6 56.3 61.5 52.7 52.3 52.3 57.1 62.1 S.C. 49.8 46.9 39.5 39.0 30.9 51.2 49.6 41.4 40.8 31.9 52.7 52.2 43.3 42.6 32.8 K.W. 4.70 4.72 4.72 4.80 4.90 4.80 4.81 4.81 4.89 4.99 4.90 4.90 4.90 4.98 5.08

T.C. 46.7 47.1 47.1 51.5 56.3 48.0 48.0 47.7 52.2 56.9 49.3 49.0 48.3 52.9 57.4 S.C. 46.7 45.3 37.9 37.3 29.1 48.0 47.2 39.8 39.1 30.1 49.3 49.0 41.6 40.9 31.1 K.W. 5.22 5.23 5.23 5.32 5.41 5.32 5.33 5.32 5.41 5.50 5.43 5.42 5.41 5.50 5.59

T.C. 43.6 43.3 43.2 47.5 51.7 44.7 44.6 43.8 48.0 52.2 45.9 45.8 44.3 48.6 52.7 S.C. 43.6 43.3 36.2 35.7 27.4 44.7 44.6 38.1 37.5 28.3 45.9 45.8 40.0 39.2 29.3 K.W. 5.75 5.74 5.74 5.84 5.92 5.85 5.85 5.83 5.92 6.01 5.95 5.95 5.92 6.01 6.10

T.C. 40.6 39.6 39.4 43.4 47.0 41.5 41.1 39.9 43.9 47.5 42.5 42.5 40.4 44.4 48.0 S.C. 40.6 39.6 34.6 34.0 25.6 41.5 41.1 36.5 35.8 26.6 42.5 42.5 38.4 37.6 27.5 K.W. 6.27 6.25 6.25 6.36 6.43 6.38 6.36 6.34 6.44 6.52 6.48 6.48 6.42 6.52 6.61

HIGH CFM

Air Handler Coil

– FC/MC62D 0.99 0.97 1.02 – AHE60D – 1.00 0.99 1.00 AHV60D – 0.98 0.94 0.98 MV20D FC/MC62D 1.04 0.98 0.98 MV20D FC64 1.07 1.02 0.98 MX20D FC/MC62D 1.00 0.99 0.98 MX20D FC64 1.04 1.03 0.98

Furnace Coil

T*(8,L)V*C16 FC/MC62D 1.03 0.98 1.00 T*(8,L)V*C16 FC64 1.06 1.00 1.00 T*(8,L)V*C20 FC/MC62D 1.03 0.98 0.99 T*(8,L)V*C20 FC64 1.06 1.02 0.99 T*(8,L)X*C16 FC/MC62D 1.03 0.98 0.98 T*(8,L)X*C16 FC64 1.07 1.02 0.99 T*(8,L)X*C20 FC64 1.07 1.02 0.99 T*9(C,V)*C16 FC/MC62D 1.03 0.97 1.00 T*9(C,V)*C16 FC64 1.06 1.00 1.01 T*9(C,V)*C20 FC/MC62D 1.02 0.97 1.01

FC64 1.02 1.02 1.03

T.C. S.C. KW

Furnace Coil

T*9(C,V)*C20 FC64 1.06 1.00 1.02 T*9(C,V)*D20 FC/MC62D 1.03 0.97 1.01 T*9(C,V)*D20 FC64 1.06 1.00 1.01 T*9X*C16 FC/MC62D 1.03 0.98 0.99 T*9X*C16 FC64 1.06 1.02 0.99 T*9X*C20 FC/MC62D 1.03 0.97 0.98 T*9X*C20 FC64 1.06 1.00 0.99 T*9X*D20 FC/MC62D 1.02 0.97 0.98 T*9X*D20 FC64 1.06 1.00 0.99 C*(8,L)C*C16 FC/MC62D 1.03 0.98 1.00 C*(8,L)C*C16 FC64 1.06 1.00 1.00 C*(8,L)C*C20 FC/MC62D 1.03 0.98 0.99 C*(8,L)C*C20 FC64 1.06 1.02 0.99 C*9C*C16 FC/MC62D 1.03 0.97 1.00 C*9C*C16 FC64 1.06 1.00 1.01 C*9C*C20 FC/MC62D 1.02 0.97 1.01 C*9C*C20 FC64 1.06 1.00 1.02 C*9C*D20 FC/MC62D 1.03 0.97 1.01 C*9C*D20 FC64 1.06 1.00 1.01

T.C. S.C. KW

30 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B024F3(C) INDOOR COIL MODEL NO. FC/MC/PC35

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 29.14.301.9830.44.691.9031.65.121.81 70 28.33.782.2029.44.122.0930.54.491.99 80 27.63.352.4128.53.642.2929.43.962.17 60 24.43.851.8625.14.031.8325.84.211.80 70 24.13.352.1024.63.532.0425.23.721.99 80 23.72.952.3624.23.132.2624.63.322.17 60 22.13.301.9622.73.521.8923.33.751.82 70 21.82.952.1722.33.172.0622.83.401.96 80 21.52.672.3621.92.872.2422.33.102.11 60 19.53.201.7820.03.281.7820.53.351.79 70 19.12.811.9919.52.891.9719.82.971.96 80 18.72.492.2019.02.572.1619.22.642.13 60 15.72.621.7516.02.681.7516.42.751.74 70 15.32.152.0815.62.292.0015.92.431.92 80 14.81.812.4015.21.982.2415.52.172.09 60 13.62.281.7513.92.331.7414.12.381.73 70 12.91.951.9413.32.031.9213.72.101.91 80 12.2 1.68 2.12 12.7 1.77 2.11 13.3 1.86 2.09

MBH COP KW MBH COP KW MBH COP KW

600 800 1000

Multipliers for determining the performance with other indoor section.

Air Handler Coil

– FC/MC/PC32 1.00 1.00 1.00 – – – AHE24B – 0.97 1.09 0.89 AHE30B – 0.97 1.09 0.90 AHR24B – 0.98 1.03 0.95 AHV24B – 0.97 1.05 0.92 AHV30B – 0.97 1.08 0.90 AHV36C – 0.97 1.11 0.88 AV*36 – 0.97 1.10 0.87 MV12B FC/MC35B 0.97 1.10 0.89 MV12B FC/MC43B 0.98 1.12 0.88 MX12B FC/MC35B 0.97 1.12 0.87 MX12B FC/MC43B 0.97 1.10 0.87

Furnace Coil

T*(8,L)V*A12 FC/MC/PC32A 0.97 1.07 0.91 T*(8,L)V*A12 FC/MC/PC37A 0.98 1.12 0.88 T*(8,L)V*B12 FC/MC/PC35B 0.97 1.09 0.89 T*(8,L)V*B12 FC/MC/PC43B 0.98 1.12 0.88 T*(8,L)V*C16 FC/MC/PC35C 0.97 1.10 0.88 T*(8,L)V*C16 FC/MC/PC43C 0.97 1.13 0.86 T*(8,L)V*C20 FC/MC/PC35C 0.97 1.07 0.90 T*(8,L)V*C20 FC/MC/PC43C 0.97 1.10 0.89 T*(8,L)X*A12 FC/MC/PC32A 0.97 1.11 0.88 T*(8,L)X*A12 FC/MC/PC37A 0.97 1.16 0.84 T*(8,L)X*B12 FC/MC/PC35B 0.97 1.12 0.87 T*(8,L)X*B12 FC/MC/PC43B 0.97 1.16 0.84 T*(8,L)X*C16 FC/MC/PC35C 0.97 1.13 0.86 T*(8,L)X*C16 FC/MC/PC43C 0.97 1.16 0.84 T*(8,L)X*C20 FC/MC/PC35C 0.97 1.12 0.87

FC/MC/PC35 1.00 1.00 1.00 FC/MC/PC37 1.01 1.05 0.96 FC/MC/PC43 1.01 1.05 0.96

MBH COP KW

Furnace Coil

T*(8,L)X*C20 FC/MC/PC43C 0.97 1.13 0.86 T*9(C,V)*B12 FC/MC/PC35B 0.98 1.08 0.91 T*9(C,V)*B12 FC/MC/PC43B 0.98 1.11 0.88 T*9(C,V)*C16 FC/MC/PC35C 0.98 1.10 0.89 T*9(C,V)*C16 FC/MC/PC43C 0.98 1.12 0.88 T*9(C,V)*C20 FC/MC/PC35C 0.97 1.07 0.91 T*9(C,V)*C20 FC/MC/PC43C 0.98 1.14 0.86 T*9V*A10 FC/MC/PC32A 0.98 1.05 0.93 T*9V*A10 FC/MC/PC37A 0.99 1.08 0.92 T*9X*A10 FC/MC/PC32A 0.98 1.05 0.93 T*9X*A10 FC/MC/PC37A 0.98 1.08 0.91 T*9X*B12 FC/MC/PC35B 0.97 1.11 0.88 T*9X*B12 FC/MC/PC43B 0.97 1.14 0.86 T*9X*C16 FC/MC/PC35C 0.97 1.11 0.88 T*9X*C16 FC/MC/PC43C 0.97 1.14 0.86 T*9X*C20 FC/MC/PC35C 0.97 1.10 0.88 T*9X*C20 FC/MC/PC43C 0.97 1.13 0.86 C*(8,L)C*A12 FC/MC/PC32A 0.97 1.07 0.91 C*(8,L)C*A12 FC/MC/PC37A 0.98 1.12 0.88 C*(8,L)C*B12 FC/MC/PC35B 0.97 1.09 0.89 C*(8,L)C*B12 FC/MC/PC43B 0.98 1.12 0.88 C*(8,L)C*C16 FC/MC/PC35C 0.97 1.10 0.88 C*(8,L)C*C16 FC/MC/PC43C 0.97 1.13 0.86 C*(8,L)C*C20 FC/MC/PC35C 0.97 1.07 0.90 C*(8,L)C*C20 FC/MC/PC43C 0.97 1.10 0.89 C*9C*B12 FC/MC/PC35B 0.98 1.08 0.91 C*9C*B12 FC/MC/PC43B 0.98 1.11 0.88 C*9C*C16 FC/MC/PC35C 0.98 1.10 0.89 C*9C*C16 FC/MC/PC43C 0.98 1.12 0.88 C*9C*C20 FC/MC/PC35C 0.97 1.07 0.91 C*9C*C20 FC/MC/PC43C 0.98 1.14 0.86

ID CFM

MBH COP KW

Johnson Controls Unitary Products 31

632152-CTG-E-0812

HEATING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B030F3(C) INDOOR COIL MODEL NO. FC/MC/PC43

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80

800 1000 1200

MBH COP KW MBH COP KW MBH COP KW

34.9 4.32 2.37 35.6 4.54 2.30 36.2 4.77 2.22

34.2 3.84 2.61 34.9 4.04 2.53 35.5 4.25 2.45

33.5 3.44 2.85 34.1 3.62 2.76 34.8 3.82 2.67

30.3 3.93 2.26 30.6 4.03 2.22 30.9 4.14 2.18

29.6 3.48 2.50 30.0 3.60 2.44 30.3 3.71 2.39

29.0 3.11 2.73 29.4 3.23 2.66 29.7 3.36 2.59

26.7 3.54 2.21 27.3 3.66 2.18 27.9 3.79 2.15

26.5 3.18 2.44 27.0 3.29 2.40 27.4 3.40 2.36

26.4 2.89 2.67 26.7 2.98 2.62 27.0 3.08 2.57

24.4 3.33 2.14 24.0 3.30 2.13 23.6 3.28 2.11

23.4 2.90 2.37 23.5 2.94 2.34 23.6 2.98 2.32

22.5 2.54 2.60 23.0 2.64 2.55 23.5 2.74 2.52

19.3 2.75 2.06 19.7 2.79 2.06 20.0 2.83 2.07

18.9 2.46 2.26 19.3 2.51 2.25 19.6 2.56 2.25

18.6 2.21 2.46 18.9 2.27 2.44 19.3 2.32 2.44

16.7 2.45 2.00 15.9 2.30 2.02 15.0 2.16 2.04

16.6 2.21 2.20 16.4 2.17 2.21 16.1 2.14 2.21

16.4 2.01 2.39 16.8 2.06 2.40 17.3 2.12 2.38

Multipliers for determining the performance with other indoor section.

ID CFM

Air Handler Coil

– FC/MC/PC37 1.00 1.00 1.00 – AHE36C – 0.99 1.11 0.89 AHR36B – 1.02 1.04 0.98 AHV36C – 0.98 1.07 0.91 AV*36 – 0.98 1.10 0.89 MV12B FC/MC43B 0.99 1.08 0.92 MV16C FC/MC43C 0.99 1.08 0.91 MX12B FC/MC43B 1.00 1.11 0.91 MX16C FC/MC43C 0.98 1.09 0.90

FC/MC/PC43 1.00 1.00 1.00

MBH COP KW

Furnace Coil

T*(8,L)V*A12 FC/MC/PC37A 0.99 1.06 0.94 T*(8,L)V*B12 FC/MC/PC43B 1.00 1.07 0.93 T*(8,L)V*C16 FC/MC/PC43C 0.99 1.09 0.91 T*(8,L)V*C20 FC/MC/PC43C 0.99 1.11 0.89 T*(8,L)X*A12 FC/MC/PC37A 1.00 1.11 0.90 T*(8,L)X*B12 FC/MC/PC43B 1.00 1.11 0.90 T*(8,L)X*C16 FC/MC/PC43C 0.98 1.08 0.91 T*(8,L)X*C20 FC/MC/PC43C 0.97 1.08 0.90 T*9(C,V)*B12 FC/MC/PC43B 1.00 1.06 0.94 T*9(C,V)*C16 FC/MC/PC43C 0.99 1.08 0.92 T*9(C,V)*C20 FC/MC/PC43C 0.99 1.08 0.91 T*9X*B12 FC/MC/PC43B 1.00 1.11 0.91 T*9X*C16 FC/MC/PC43C 0.99 1.10 0.90 T*9X*C20 FC/MC/PC43C 0.96 0.99 0.97 C*(8,L)C*A12 FC/MC/PC37A 0.99 1.06 0.94 C*(8,L)C*B12 FC/MC/PC43B 1.00 1.07 0.93 C*(8,L)C*C16 FC/MC/PC43C 0.99 1.09 0.91 C*9C*B12 FC/MC/PC43B 1.00 1.06 0.94 C*9C*C16 FC/MC/PC43C 0.99 1.08 0.92 C*9C*C20 FC/MC/PC43C 0.99 1.08 0.91

MBH COP KW

32 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B036F3(C) INDOOR COIL MODEL NO. FC/MC/PC48

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80

1000 1200 1400

MBH COP KW MBH COP KW MBH COP KW

43.8 4.26 2.99 44.0 4.63 2.76 44.1 5.09 2.52

42.9 3.74 3.33 43.2 4.07 3.08 43.4 4.48 2.82

42.0 3.31 3.69 42.4 3.63 3.40 42.8 3.99 3.11

37.8 3.94 2.81 37.7 4.27 2.59 37.6 4.66 2.36

37.0 3.47 3.13 37.1 3.75 2.90 37.1 4.08 2.67

36.2 3.08 3.45 36.5 3.33 3.21 36.7 3.63 2.96

34.1 3.69 2.72 34.1 3.97 2.53 34.2 4.32 2.33

33.5 3.26 3.03 33.7 3.52 2.82 33.9 3.83 2.60

32.9 2.90 3.34 33.2 3.15 3.10 33.5 3.44 2.87

30.0 3.43 2.56 30.1 3.68 2.40 30.1 3.98 2.22

29.4 3.00 2.87 29.5 3.23 2.68 29.7 3.48 2.50

28.7 2.66 3.17 28.9 2.86 2.97 29.2 3.09 2.77

24.3 2.38 3.00 24.6 2.80 2.57 24.8 3.42 2.13

23.8 2.31 3.01 24.1 2.63 2.69 24.5 3.03 2.37

23.3 2.27 3.01 23.7 2.47 2.81 24.1 2.71 2.61

21.6 2.82 2.27 21.0 2.90 2.14 20.4 2.99 2.02

21.1 2.49 2.51 20.8 2.65 2.32 20.4 2.83 2.13

20.7 2.22 2.75 20.5 2.43 2.50 20.4 2.67 2.26

Multipliers for determining the performance with other indoor sections.

Air Handler Coil

– FC/MC/PC48 1.00 1.00 1.00 – – – AHE42D – 0.98 1.06 0.92 AHE48D – 0.97 1.07 0.91 AHR42C – 1.00 1.01 0.99 AHV42D – 0.98 1.06 0.92 AHV48D – 0.97 1.06 0.92 AV*48 – 0.98 1.12 0.88 MV12D FC/MC48D 0.98 1.08 0.91 MV12D FC/MC60D 0.98 1.09 0.90 MV16C FC/MC48C 0.98 1.06 0.93 MX12D FC/MC48D 0.98 1.06 0.93 MX12D FC/MC60D 0.99 1.12 0.88 MX16C FC/MC48C 0.98 1.08 0.91

Furnace Coil

T*(8,L)V*C16 FC/MC/PC48C 0.98 1.06 0.93 T*(8,L)V*C16 FC/PC60C 0.98 1.11 0.88 T*(8,L)V*C16 UC48C 0.99 1.09 0.91 T*(8,L)V*C16 UC60C 0.98 1.09 0.90 T*(8,L)V*C20 FC/MC/PC48C 0.98 1.06 0.93 T*(8,L)V*C20 FC/PC60C 0.99 1.10 0.90 T*(8,L)V*C20 UC48C 0.98 1.10 0.89 T*(8,L)V*C20 UC60C 0.99 1.08 0.91 T*(8,L)X*C16 FC/MC/PC48C 0.98 1.08 0.91 T*(8,L)X*C16 FC/PC60C 0.98 1.13 0.87 T*(8,L)X*C16 UC48C 0.98 1.11 0.88

FC/MC/PC60 1.00 1.03 0.97 UC48 1.00 1.03 0.97 UC60 1.00 1.02 0.98

MBH COP KW

Furnace Coil

T*(8,L)X*C16 UC60C 0.98 1.10 0.88 T*(8,L)X*C20 FC/MC/PC48C 0.98 1.08 0.91 T*(8,L)X*C20 FC/PC60C 0.99 1.13 0.88 T*(8,L)X*C20 UC48C 0.99 1.11 0.89 T*(8,L)X*C20 UC60C 0.98 1.11 0.88 T*9(C,V)*D20 FC/MC/PC48D 0.98 1.05 0.94 T*9(C,V)*D20 FC/MC/PC60D 0.99 1.09 0.91 T*9X*C16 FC/MC/PC48C 0.99 1.07 0.93 T*9X*C16 FC/PC60C 0.99 1.11 0.89 T*9X*C16 UC48C 0.99 1.10 0.90 T*9X*C16 UC60C 0.99 1.10 0.90 T*9X*C20 FC/MC/PC48C 0.98 1.06 0.93 T*9X*C20 FC/PC60C 0.99 1.10 0.89 T*9X*C20 UC48C 0.99 1.09 0.90 T*9X*C20 UC60C 0.98 1.09 0.90 T*9X*D20 FC/MC/PC48D 0.98 1.06 0.92 T*9X*D20 FC/MC/PC60D 0.99 1.14 0.87 T*9X*D20 UC48D 0.98 1.10 0.89 T*9X*D20 UC60D 0.99 1.12 0.88 C*(8,L)C*C16 FC/MC/PC48C 0.98 1.06 0.93 C*(8,L)C*C16 FC/PC60C 0.98 1.11 0.88 C*(8,L)C*C16 UC48C 0.99 1.09 0.91 C*(8,L)C*C16 UC60C 0.98 1.09 0.90 C*(8,L)C*C20 FC/MC/PC48C 0.98 1.06 0.93 C*(8,L)C*C20 FC/PC60C 0.99 1.10 0.90 C*(8,L)C*C20 UC48C 0.98 1.10 0.89 C*(8,L)C*C20 UC60C 0.99 1.08 0.91 C*9C*D20 FC/MC/PC48D 0.98 1.05 0.94 C*9C*D20 FC/MC/PC60D 0.99 1.09 0.91

ID CFM

MBH COP KW

Johnson Controls Unitary Products 33

632152-CTG-E-0812

HEATING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B042F4(C) INDOOR COIL MODEL NO. FC/MC62

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80

1200 1400 1600

MBH COP KW MBH COP KW MBH COP KW

48.88 4.87 2.94 50.3 5.05 2.92 51.8 4.89 2.95

46.8 4.29 3.20 48.1 4.45 3.17 49.5 4.31 3.20

44.7 3.79 3.46 45.9 3.94 3.42 47.2 3.82 3.44

41.7 3.57 3.42 42.6 3.99 3.13 43.5 4.19 2.89

40.2 3.46 3.40 41.0 3.70 3.25 41.9 3.71 3.14

38.6 3.36 3.37 39.4 3.44 3.36 40.2 3.30 3.40

38.0 3.94 2.83 38.9 4.03 2.83 39.8 3.86 2.87

36.1 3.44 3.07 37.1 3.54 3.07 38.1 3.41 3.12

34.2 3.02 3.33 35.4 3.12 3.32 36.5 3.03 3.36

29.5 3.19 2.71 31.7 3.38 2.75 33.9 3.33 2.84

29.7 2.92 2.98 31.1 3.03 3.01 32.5 2.93 3.09

30.0 2.69 3.26 30.5 2.74 3.27 31.0 2.60 3.32

28.8 3.11 2.71 28.1 3.02 2.73 27.4 2.73 2.80

22.5 2.30 2.87 22.0 2.23 2.89 21.5 2.02 2.97

16.3 1.58 3.01 15.9 1.53 3.05 15.6 1.38 3.15

25.0 2.73 2.68 25.0 2.71 2.71 25.1 2.52 2.77

19.2 1.99 2.83 19.3 1.98 2.86 19.4 1.83 2.95

13.4 1.33 2.97 13.6 1.32 3.02 13.7 1.22 3.12

Multipliers for determining the performance with other indoor section.

Air Handler Coil

– FC/MC/PC60 1.00 0.98 1.02 – – AHE48D – 0.99 1.05 0.94 AHE60D – 0.98 1.11 0.88 AHR60D – 1.00 1.06 0.94 AHV48D – 0.99 1.04 0.95 AHV60D – 0.98 1.09 0.89 AV*48 – 1.00 1.11 0.90 MV16C FC60C 1.00 1.10 0.91 MV20D FC/MC60D 1.00 1.12 0.89 MV20D FC/MC62D 0.99 1.11 0.89 MX16C FC60C 0.99 1.11 0.89 MX20D FC/MC60D 1.00 1.15 0.87 MX20D FC/MC62D 0.98 1.15 0.85

Furnace Coil

T*(8,L)V*C16 FC/MC62D 1.00 1.10 0.91 T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.96 T*(8,L)V*C16 UC60C 1.00 1.08 0.92 T*(8,L)V*C20 FC/MC62D 0.99 1.10 0.90 T*(8,L)V*C20 FC/PC60C 1.00 1.10 0.91 T*(8,L)V*C20 UC60C 1.00 1.08 0.92 T*(8,L)X*C16 FC/MC62D 0.99 1.12 0.88 T*(8,L)X*C16 FC/PC60C 0.99 1.04 0.95 T*(8,L)X*C16 UC60C 0.99 1.10 0.90 T*(8,L)X*C20 FC/MC62D 0.99 1.14 0.87 T*(8,L)X*C20 FC/PC60C 1.00 1.12 0.89 T*(8,L)X*C20 UC60C 0.99 1.10 0.89 T*9(C,V)*C16 FC/MC62D 1.00 1.08 0.92 T*9(C,V)*C16 FC/PC60C 1.00 1.09 0.92

FC/MC62 1.00 1.00 1.00 UC60 1.01 1.03 0.98

MBH COP KW

Furnace Coil

T*9(C,V)*C16 UC60C 1.00 1.05 0.95 T*9(C,V)*C20 FC/MC62D 1.00 1.10 0.91 T*9(C,V)*C20 FC/PC60C 1.01 1.10 0.92 T*9(C,V)*C20 UC60C 1.01 1.09 0.93 T*9(C,V)*D20 FC/MC/PC60D 1.00 1.10 0.91 T*9(C,V)*D20 FC/MC62D 1.00 1.10 0.91 T*9(C,V)*D20 UC60D 1.00 1.07 0.93 T*9X*C16 FC/MC62D 0.99 1.12 0.88 T*9X*C16 FC/PC60C 1.00 1.12 0.89 T*9X*C16 UC60C 1.00 1.10 0.91 T*9X*C20 FC/MC62D 0.99 1.13 0.87 T*9X*C20 FC/PC60C 1.00 1.11 0.90 T*9X*C20 UC60C 1.00 1.08 0.92 T*9X*D20 FC/MC/PC60D 1.00 1.14 0.88 T*9X*D20 FC/MC62D 0.99 1.13 0.87 T*9X*D20 UC60D 1.00 1.12 0.89 C*(8,L)C*C16 FC/MC62D 1.00 1.10 0.91 C*(8,L)C*C16 FC/PC60C 0.99 1.03 0.96 C*(8,L)C*C16 UC60C 1.00 1.08 0.92 C*(8,L)C*C20 FC/MC62D 0.99 1.10 0.90 C*(8,L)C*C20 FC/PC60C 1.00 1.10 0.91 C*(8,L)C*C20 UC60C 1.00 1.08 0.92 C*9C*C16 FC/MC62D 1.00 1.08 0.92 C*9C*C16 FC/PC60C 1.00 1.09 0.92 C*9C*C16 UC60C 1.00 1.05 0.95 C*9C*C20 FC/MC62D 1.00 1.10 0.91 C*9C*C20 FC/PC60C 1.01 1.10 0.92 C*9C*C20 UC60C 1.01 1.09 0.93 C*9C*D20 FC/MC/PC60D 1.00 1.10 0.91 C*9C*D20 FC/MC62D 1.00 1.10 0.91 C*9C*D20 UC60D 1.00 1.07 0.93

ID CFM

MBH COP KW

34 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING PERFORMANCE DATA

OUTDOOR UNIT MODEL NO. HC6B048F3(C) INDOOR COIL MODEL NO. FC/MC62

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80

1400 1600 1800

MBH COP KW MBH COP KW MBH COP KW

61.1 4.66 3.84 61.2 4.75 3.78 61.3 4.84 3.71

58.8 4.02 4.29 59.1 4.12 4.20 59.4 4.23 4.11

56.6 3.50 4.74 57.0 3.61 4.63 57.4 3.74 4.50

51.6 3.80 3.98 51.8 3.89 3.90 52.0 3.98 3.83

50.4 3.39 4.35 50.5 3.46 4.28 50.7 3.54 4.20

49.1 3.05 4.72 49.3 3.11 4.65 49.4 3.16 4.59

43.8 3.41 3.76 45.7 3.61 3.71 47.7 3.82 3.66

43.9 3.02 4.26 44.7 3.13 4.18 45.5 3.25 4.10

43.9 2.71 4.75 43.6 2.75 4.65 43.3 2.79 4.55

39.0 3.12 3.66 40.1 3.24 3.63 41.3 3.35 3.61

39.1 2.87 3.99 39.7 2.92 3.98 40.2 2.98 3.95

39.3 2.65 4.34 39.2 2.66 4.32 39.1 2.67 4.29

34.0 2.79 3.57 34.2 2.84 3.53 34.5 2.89 3.50

33.2 2.46 3.96 33.5 2.51 3.91 33.8 2.57 3.85

32.5 2.20 4.32 32.7 2.25 4.26 33.0 2.30 4.20

29.5 2.56 3.38 29.7 2.57 3.38 29.8 2.57 3.40

29.3 2.33 3.68 29.5 2.34 3.70 29.8 2.34 3.73

29.0 2.13 3.99 29.4 2.14 4.03 29.8 2.15 4.06

ID CFM

Multipliers for determining the performance with other indoor sections.

Air Handler Coil

– FC/MC62 1.00 1.00 1.00 – AHE60D – 0.99 1.10 0.90 AHR60D – 1.01 1.05 0.96 AHV60D – 1.00 1.08 0.92 MV20D FC/MC62D 1.01 1.13 0.89 MV20D FC64 1.02 1.18 0.86 MX20D FC/MC62D 1.01 1.17 0.86 MX20D FC64 1.00 1.15 0.87

FC64 1.02 1.00 1.00

MBH COP KW

Furnace Coil

T*(8,L)V*C16 FC64 1.03 1.16 0.89 T*(8,L)V*C20 FC64 1.03 1.17 0.88 T*(8,L)X*C16 FC64 1.03 1.17 0.88 T*(8,L)X*C20 FC/MC62D 1.02 1.15 0.89 T*(8,L)X*C20 FC64 1.02 1.18 0.86 T*9(C,V)*C16 FC64 1.03 1.15 0.89 T*9X*C16 FC64 1.03 1.17 0.88 T*9X*C20 FC/MC62D 1.01 1.13 0.89 T*9X*C20 FC64 1.02 1.17 0.87 T*9X*D20 FC64 1.03 1.16 0.89 C*(8,L)C*C16 FC64 1.03 1.16 0.89 C*(8,L)C*C20 FC64 1.03 1.17 0.88 C*9C*C16 FC64 1.03 1.15 0.89

MBH COP KW

Johnson Controls Unitary Products 35

HEATING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION

OUTDOOR UNIT MODEL NO. HC6B060F3(C) INDOOR COIL MODEL NO. FC/MC62

AIR TEMP.

ENTERING

OUTDOOR UNIT

NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).

AIR TEMP.

ENTERING

INDOOR COIL

60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80

1650 1850 2050

MBH COP KW MBH COP KW MBH COP KW

72.6 4.30 4.94 73.3 4.42 4.86 74.1 4.55 4.77

71.1 3.82 5.45 72.0 3.94 5.36 72.9 4.07 5.25

69.6 3.42 5.97 70.7 3.54 5.85 71.7 3.67 5.73

62.5 3.91 4.68 62.9 3.98 4.63 63.4 4.06 4.58

61.4 3.46 5.20 61.9 3.54 5.12 62.4 3.62 5.05

60.3 3.10 5.70 60.8 3.18 5.61 61.4 3.26 5.52

56.0 3.56 4.61 56.4 3.64 4.54 56.7 3.71 4.48

55.1 3.17 5.09 55.4 3.23 5.03 55.8 3.30 4.95

54.2 2.85 5.57 54.5 2.90 5.51 54.9 2.96 5.44

47.1 3.16 4.37 46.0 3.10 4.35 45.0 3.04 4.33

47.6 2.87 4.86 47.2 2.86 4.83 46.7 2.85 4.80

48.2 2.63 5.37 48.3 2.66 5.32 48.5 2.70 5.26

39.8 2.74 4.26 40.2 2.78 4.24 40.6 2.82 4.22

37.9 2.37 4.69 37.8 2.40 4.62 37.7 2.42 4.57

36.0 2.07 5.10 35.4 2.07 5.02 34.9 2.07 4.93

35.0 2.46 4.17 35.2 2.48 4.16 35.4 2.50 4.15

34.7 2.23 4.57 34.9 2.25 4.55 35.1 2.28 4.51

34.4 2.03 4.97 34.6 2.06 4.93 34.8 2.09 4.89

ID CFM

Multipliers for determining the performance with other indoor sections.

Air Handler Coil

– FC/MC62D 1.00 1.00 1.00 – FC64 1.04 1.05 0.99 AHE60D – 1.00 1.03 0.97 AHV60D – 0.98 1.00 0.97 MV20D FC/MC62D 0.98 1.00 0.98 MV20D FC64 0.99 0.99 1.01 MX20D FC/MC62D 1.01 0.99 1.02 MX20D FC64 1.04 0.99 1.04

Furnace Coil

T*(8,L)V*C16 FC/MC62D 0.99 1.03 0.96 T*(8,L)V*C16 FC64 1.00 1.01 0.99 T*(8,L)V*C20 FC/MC62D 0.99 1.02 0.97 T*(8,L)V*C20 FC64 0.99 1.00 0.99 T*(8,L)X*C16 FC/MC62D 0.99 1.02 0.97 T*(8,L)X*C16 FC64 0.99 0.99 1.00 T*(8,L)X*C20 FC64 0.99 0.98 1.01 T*9(C,V)*C16 FC/MC62D 0.99 1.04 0.96 T*9(C,V)*C16 FC64 1.00 1.02 0.98 T*9(C,V)*C20 FC/MC62D 1.00 1.05 0.95 T*9(C,V)*C20 FC64 1.00 1.02 0.98 T*9(C,V)*D20 FC/MC62D 0.99 1.04 0.96 T*9(C,V)*D20 FC64 1.00 1.02 0.98 T*9X*C16 FC/MC62D 0.99 1.02 0.97 T*9X*C16 FC64 0.99 1.00 0.99 T*9X*C20 FC/MC62D 0.98 1.02 0.97

MBH COP KW

Furnace Coil

T*9X*C20 FC64 0.99 1.00 0.99 T*9X*D20 FC/MC62D 0.99 1.03 0.96 T*9X*D20 FC64 0.99 1.00 0.99 C*(8,L)C*C16 FC/MC62D 0.99 1.03 0.96 C*(8,L)C*C16 FC64 1.00 1.01 0.99 C*(8,L)C*C20 FC/MC62D 0.99 1.02 0.97 C*(8,L)C*C20 FC64 0.99 1.00 0.99 C*9C*C16 FC/MC62D 0.99 1.04 0.96 C*9C*C16 FC64 1.00 1.02 0.98 C*9C*C20 FC/MC62D 1.00 1.05 0.95 C*9C*C20 FC64 1.00 1.02 0.98 C*9C*D20 FC/MC62D 0.99 1.04 0.96 C*9C*D20 FC64 1.00 1.02 0.98

MBH COP KW

632152-CTG-D-0512

York International Corp.

5005 York Drive

Norman, OK 73069

Coleman HC6B024 THRU 060, HC6B024F3(C), HC6B060F3(C), HC6B030F3(C), HC6B036F3(C) Technical Manual

Specifications and Main Features

Frequently Asked Questions

User Manual