Coleman HC6B024 THRU 060, HC6B024F3(C), HC6B060F3(C), HC6B030F3(C), HC6B036F3(C) Technical Manual

TECHNICAL GUIDE

ECHELONTM SERIES
SPLIT-SYSTEM HEAT PUMPS
16 SEER – R-410A – 1 PHASE
2 THRU 5 NOMINAL TONS

MODELS: HC6B024 THRU 060

Due to continuous product improvement, specifications
are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.colemanac.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY*

Extended 10-Years limited parts warranty.
Extended Lifetime limited compressor warranty.

Extended parts and compressor warranties require online
registration within 90 days of purchase for replacement or
closing for new home construction.

* Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.

®

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

632152-CTG-E-0812

DESCRIPTION

The 16 SEER Series unit is the outdoor part of a versatile climate
system. It is designed with a matching indoor coil component from
Johnson Controls Unitary Products. Available for typical applica­tions, this climate system is supported with accessories and docu­ments to serve specific functions.

FEATURES

• Superior Coil Protection - A stamped, decorative metal coil
guard protects the tube-in-fin coil from debris and other damag­ing material.

• Protected Compressor - The compressor is safeguarded
against abnormal pressures and temperatures by an internal
pressure relief valve, an internal temperature sensor, and fac­tory high and low pressure system controls. A factory installed
liquid line filter-drier further protects the compressor against
moisture and debris.

• Environmentally Friendly Refrigerant - The next generation
refrigerant R-410A delivers environmentally friendly perfor­mance with zero ozone depletion.

• Durable Finish - An automotive quality finish provides the ulti­mate protection from harmful UV rays and rust creep, ensuring
a long-lasting, high quality appearance. A powder-paint topcoat
is applied over a baked-on primer using a galvanized, zinc
coated steel base material. The result is a finish that has been
proven in testing to provide 33% greater durability than conven­tional powder-coat finishes.

• Hot Heat Pump - An optional mode that slows the indoor fan
for higher register air temperatures and premium comfort.

• WhisperDrive™ System - Features combination of swept­wing fan, composite base pan, isolated compressor compart­ment, and single-stage compressor to reduce overall sound to
a mere whisper. The 5-ton system utilizes a two-stage com­pressor.

• Low RPM Fan Motor - Helps to reduce airflow noise.

• Swept Wing Fan - A fan design boasting technology adapted
from aeronautic and defense engineering provides for whisper­quiet operation by allowing air to flow smoothly and efficiently
across the fan tips.

• Composite Base Pan - The strong and durable composite
base pan provides added strength while resisting rust and cor­rosion, as well as reducing sound and vibration.

• Isolated Compressor Compartment - A molded composite
bulkhead isolates the refrigeration components and the com­pressor from the rest of the unit, reducing sound and vibration.

• Lower Installed Cost - Designed to provide enhanced instal­lability by featuring a slide-down control compartment that
allows easy access to control components, along with angled
service valves to reduce overall installation time and cost. Fac­tory charged for a 15 foot lineset.

• Factory Installed Filter-Drier - A factory installed, solid core
liquid line filter-drier removes harmful debris and moisture from
the system.

• Easy Service Access - A full end, full service access panel
with handle makes for easy entry to internal components.

• Communications Capable - Requiring only a simple 4-wire
installation, the communicating capability enables the use of
the Touch Screen Communicating Control, allowing real time
visibility of system operation and the use of diagnostic features,
while still maintaining the ability to function with a traditional
thermostat.

• Complete System Control - These heat pumps utilize a
unique microprocessor defrost control system to provide opti­mal comfort as well as monitor the overall system for reliable
operation. In the event improper operating conditions occur
(high temperature and/or high pressure), the system will auto­matically shut the system down to extend the life of the heat
pump. The defrost control features an internal memory to aid
the technician in troubleshooting, reducing service time and
cost.

• Premium System Warranty* - Limited lifetime compressor
warranty when registered online within 90 days of installation.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240 in
accordance with the Unitary Small Equipment certification pro­gram.

632152-CTG-E-0812

VAPOR

LIQUID

2-3/8

3-1/8

6-1/2

C

A

B

Physical and Electrical Data

Model HC6B024F3(C) HC6B030F3(C) HC6B036F3(C) HC6B042F4(C) HC6B048F3(C) HC6B060F3(C)

Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range
Minimum Circuit Ampacity 17.5 17.3 22.6 23.7 26.9 33.8
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps
Compressor Type Scroll Scroll Scroll Scroll Scroll 2-Stage Scroll

Compressor Amps
Crankcase Heater No No No No No No

Factory External Discharge Muffler Yes Yes Yes Yes Yes Yes
Factory External Check Valve NoNoNoNoNoNo
HS Kit Required with TXV
Fan Motor Amps Rated Load 0.7 1.3 1.3 1.3 1.3 1.3
Fan Diameter Inches 24 24 24 24 24 24

Fan Motor

Coil

Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 7/8 7/8 1-1/8
Unit Charge (Lbs. - Oz.)
Charge Per Foot, Oz. 0.68 0.68 0.68 0.70 0.70 0.76
Operating Weight Lbs. 199 228 230 237 283 298

1. Rated in accordance with AHRI Standa rd 110-2012, utilization range “A”.

2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4. See Hard Start Kit Accessory Installation Manual for Hard St art Kit part number for each model.

5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing leng ths other than 15 feet, add or
subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

1

2

3

30 30 35 40 45 50
20 20 25 25 30 35

187 to 252

Rated Load 13.4 12.8 17 17.9 20.5 26
Locked Rotor 58.3 64 77 112 115 118

4

No No No No No No

Rated HP 1/8 1/4 1/4 1/4 1/4 1/4
Nominal RPM 1075 850 850 850 850 850
Nominal CFM 2750 3800 3800 3800 3400 3700
Face Area Sq. Ft. 20.6 23.6 23.6 23.6 23.6 23.6
Rows Deep111122
Fins / Inch 22 22 22 22 22 14

5

9 - 3 9 - 13 10 - 10 11 - 7 14 - 5 14 - 11

Unit

Model

Dimensions

(Inches)

A B C Liquid Vapor

Refrigerant Connection

Service Valve Size

024 40 37 31

3/4030 40 42-1/4 34
036 40 42-1/4 34
042 40 42-1/4 34
048 40 42-1/4 34

3/8

7/8
060 40 42-1/4 34 7/8*

* Adapter fitting required for 1-1/8” line set.
Overall height is from bottom of base pan to top of fan guard.

Overall length and width include screw heads.

2 Johnson Controls Unitary Products

632152-CTG-E-0812

System Charge for Various Matched Systems

Outdoor Unit HC6B024F3(C) HC6B030F3(C) HC6B036F3(C) HC6B042F4(C) HC6B048F3(C) HC6B060F3(C)
Required TXV

1,2

4N1 4H1 4H1 4J1 4J1 4K1

Indoor Unit

3,4,5

Additional Charge, Oz

AHE24B TXV + 0 – – – – –
AHE30B TXV + 0 – – – – –
AHE36C – TXV + 0 – – – –
AHE42D – – TXV + 0 – – –
AHE48D – – TXV + 20 TXV + 0 – –
AHE60D – – – TXV + 5 TXV + 0 TXV + 0
AHR24B TXV + 0 – – – – –
AHR36B – TXV + 0 – – – –
AHR42C – – TXV + 0 – – –
AHR60D – – – TXV + 0 TXV + 0 –
AHV24B TXV + 0 – – – – –
AHV30B TXV + 0 – – – – –
AHV36C TXV + 12 TXV + 0 – – – –
AHV42D – – TXV + 0 – – –
AHV48D – – TXV + 20 TXV + 0 – –
AHV60D – – – TXV + 5 TXV + 0 TXV + 0
AV*36 TXV + 12 TXV + 0 – – – –
AV*48 – – TXV + 20 TXV + 0 – –
FC/MC/PC32 TXV + 0 – – – – –
FC/MC/PC35 TXV + 0 – – – – –
FC/MC/PC37 TXV + 12 TXV + 0 – – – –
FC/MC/PC43 TXV + 12 TXV + 0 – – – –
FC/MC/PC48 – – TXV + 0 – – –
FC/MC/PC60 – – TXV + 20 TXV + 0 – –
FC/PC62 – – – TXV + 5 TXV + 0 TXV + 0
FC64 – – – – TXV + 8 TXV + 8
UC48 – – TXV + 15 – – –
UC60 – – TXV + 31 TXV + 2 – –
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil

only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.

FOOTNOTES:

1. For applications requiring a TXV use S1-1TVM*** series kit.

2. A TXV kit must be used with these indoor units to obtain system performance.

3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.

4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.

5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.

Note: If a TXV is factory installed on the coil, it must be replaced with the listed TXV.

PROCEDURES:

1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.

2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above t able.

3. Add additional charge for the amount of interconnecting line tubi ng greater than 15 feet at the rate specified in Physical and Electrical Data Table.

4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.

5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.

Johnson Controls Unitary Products 3

632152-CTG-E-0812

COOLING CAPACITY - With Air Handler Coils

UNIT MODEL

HC6B024F3(C)

HC6B030F3(C)

HC6B036F3(C)

HC6B042F4(C)

HC6B048F3(C)

For notes, see Page 5.

AIR HANDLER

MODEL WIDTH STAGE

AHE24B 17.5 – – 795 23.8 18.0 15.00 12.50
AHE30B 17.5 – – 795 23.8 18.0 15.00 12.50
AHR24B 17.5 – - 740 23.2 16.8 13.35 11.50
AHV24B 17.5 – - 710 22.8 16.7 15.0 12.50
AHV30B 17.5 – - 775 23.0 17.3 15.0 12.50
AHV36C 21.0 – - 760 23.8 17.6 16.0 13.00

AV*36 21.0 – – 725 23.8 17.4 16.00 13.00
MV12B 17.5 FC/MC35B – 800 23.6 17.8 15.00 12.50
MV12B 17.5 FC/MC43B – 800 24.0 18.6 16.00 13.00
MX12B 17.5 FC/MC35B – 815 24.0 18.2 15.00 12.50
MX12B 17.5 FC/MC43B – 735 23.8 17.6 15.00 12.50

AHE36C 21.0 – – 1000 29.0 22.0 16.00 13.00
AHR36B 17.5 – - 1060 28.4 21.8 13.35 11.50
AHV36C 21.0 – 895 28.2 20.0 15.00 12.50

AV*36 21.0 – – 895 28.2 26.2 15.75 13.00
MV12B 17.5 FC/MC43B – 1000 28.8 21.8 16.00 13.00
MV16C 21.0 FC/MC43C – 1000 28.8 22.0 16.00 13.00
MX12B 17.5 FC/MC43B – 1095 29.2 23.0 16.00 13.00
MX16C 21.5 FC/MC43B – 970 28.0 21.8 15.00 12.50

AHE42D 21.0 – – 1180 34.8 26.0 15.00 12.50
AHE48D 24.5 – – 1195 35.4 26.6 15.00 12.50
AHR42C 21.0 – - 1230 34.6 28.2 13.35 11.50
AHV42D 24.5 – – 1180 35.4 27.0 15.00 12.50
AHV48D 24.5 – – 1155 35.2 26.6 15.00 12.50

AV*48 24.5 – – 1220 35.2 26.6 15.00 12.50
MV12D 24.5 FC/MC48D – 1160 34.8 26.0 15.00 12.50
MV12D 24.5 FC/MC60D – 1135 34.6 25.6 15.00 12.50
MV16C 21.0 FC/MC48C – 1200 34.6 25.8 15.00 12.50
MX12D 24.5 FC/MC48D – 1225 35.2 26.6 15.00 12.50
MX12D 24.5 FC/MC60D – 1275 35.2 27.0 15.00 12.50
MX16C 21.0 FC/MC48C – 1150 35.0 25.8 15.00 12.50

AHE48D 24.5 - – 1200 39.5 28.0 15.00 12.50
AHE60D 24.5 - – 1385 40.0 29.2 15.00 12.50
AHR60D 24.5 - – 1350 39.0 28.2 13.25 11.35
AHV48D 24.5 - – 1155 39.5 27.6 15.00 12.50
AHV60D 24.5 - – 1340 39.5 28.6 14.50 12.00

AV*48 24.5 - – 1220 40.0 28.8 15.00 12.50
MV16C 21.0 FC60C – 1200 39.5 28.2 15.00 12.50
MV20D 24.5 FC/MC60D – 1300 40.0 29.4 15.00 12.50
MV20D 24.5 FC/MC62D – 1400 40.0 28.6 14.50 12.00
MX16C 21.0 FC60C – 1150 39.5 28.4 15.00 12.50
MX20D 24.5 FC/MC60D – 1295 40.5 29.6 15.00 12.50
MX20D 24.5 FC/MC62D – 1470 40.5 30.2 15.00 12.50

AHE60D 24.5 – – 1565 46.5 34.8 15.00 12.50
AHR60D 24.5 – - 1620 46.0 42.5 13.35 11.50
AHV60D 24.5 – – 1570 46.5 34.6 15.00 12.50

MV20D 24.5 FC/MC62D – 1630 46.5 34.8 15.00 12.50
MV20D 24.5 FC64 – 1630 48.0 36.8 15.00 12.50
MX20D 24.5 FC/MC62D – 1605 47.0 35.4 15.00 12.50
MX20D 24.5 FC64 – 1605 48.0 36.8 15.00 12.50

COIL

MODEL

16 SEER HP WITH AIR HANDLERS

1

RATED

CFM

COOLING
NET MBH

TOTAL SENS.

SEER EER

4 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT MODEL

AIR HANDLER

MODEL WIDTH STAGE

COIL

MODEL

1

RATED

CFM

16 SEER HP WITH AIR HANDLERS

AHE60D 24.5 –

AHV60D 24.5 –

MV20D 24.5 FC/MC62D

HC6B060F3(C)

MV20D 24.5 FC64

MX20D 24.5 FC/MC62D

MX20D 24.5 FC64

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at thos e conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electr ic power
input in watt-hours during the same period.

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.

MA Modular Air Handlers use Coil Only Ratings.

1 1160 47.0 30.4
2 1835 56.5 40.5
1 1090 45.5 30.2
2 1635 54.5 39.0 11.65
1 1075 46.5 29.8
2 1630 56.0 39.0 11.80
1 1075 48.0 31.2
2 1630 57.5 40.5 12.00
1 1390 49.0 33.0
2 1795 56.5 40.5
1 1390 50.5 34.4
2 1795 58.5 42.0

COOLING
NET MBH

TOTAL SENS.

SEER EER

15.00 11.60

15.35

15.00

15.00

15.00 11.85

15.00 12.15

20.65

20.80

21.60

COOLING CAPACITY - With Upflow, Downflow, & Horizontal Furnaces and Coils (Coil Only Ratings)

UNIT

MODEL

MODEL WIDTH

COIL

CFM RANGE

(MIN.-MAX.)

STAGE

16 SEER HP COIL ONLY RATINGS

FC/MC/PC32 14.5 600 - 1000 – 800 23.2 17.2 13.35 11.50

HC6B024F3(C)

FC/MC/PC35 17.5,21.0 600 - 1000 – 800 23.2 17.2 13.35 11.50
FC/MC/PC37 14.5 600 - 1000 – 800 23.6 17.5 13.35 11.50
FC/MC/PC43 17.5,21.0 600 - 1000 – 800 23.6 17.5 13.35 11.50

HC6B030F3(C)

FC/MC/PC37 14.5 800 - 1200 – 1000 28.4 21.4 14.00 12.00
FC/MC/PC43 17.5,21.0 800 - 1200 – 1000 28.4 21.4 14.00 12.00
FC/MC/PC48 21.0,24.5 1000 - 1400 – 1200 34.4 25.6 13.35 11.50

HC6B036F3(C)

FC/MC/PC60 21.0,24.5 1000 - 1400 – 1200 34.0 25.4 13.35 11.50

UC48 21.0,24.5 1000 - 1400 – 1200 34.4 25.6 13.25 11.35
UC60 21.0,24.5 1000 - 1400 – 1200 34.0 25.2 13.25 11.35

FC/MC/PC60 21.0.0,24.5.5 1200 - 1600 – 1200 38.5 27.0 13.25 11.35

HC6B042F4(C)

FC/MC62 24.5.5 1200 - 1600 – 1400 39.0 28.0 13.00 11.00

UC60 21.0,24.5 1200 - 1600 – 1200 38.5 27.4 13.25 11.35

HC6B048F3(C)

HC6B060F3(C)

1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
MA Modular Air Handlers use Coil Only Ratings.

PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FC/MC62 24.5 1400 - 1800 – 1600 46.0 34.4 13.35 11.50

FC64 24.5 1400 - 1800 – 1600 47.0 35.6 13.35 11.50

FC/MC62 24.5

FC64 24.5

1150 - 1550 1 1350 48.0 31.8
1600 - 2000 2 1800 55.5 39.5
1150 - 1550 1 1350 49.5 33.2
1600 - 2000 2 1800 57.5 41.5

RATED

CFM

TOTAL SENS.

COOLING

NET MBH

SEER

15.00 11.10

15.00 11.40

1

EER

Johnson Controls Unitary Products 5

632152-CTG-E-0812

COOLING CAP ACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

HC6B024F3(C)

HC6B030F3(C)

For notes, see Page 8.

FURNACE

MODEL WIDTH

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*A12 14.5 FC/MC/PC3 2A 755 23.4 17.3 15.00 12.50
T*(8,L)V*A12 14.5 FC/MC/PC3 7A 765 23.8 17.7 15.00 12.50
T*(8,L)V*B12 17.5 FC/MC/PC3 5B 785 23.6 17.6 15.00 12.50
T*(8,L)V*B12 17.5 FC/MC/PC4 3B 790 24.0 18.0 15.00 12.50
T*(8,L)V*C16 21.0 FC/MC/PC35C 775 23.6 17.6 15.00 12.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50
T*(8,L)V*C20 21.0 FC/MC/PC43C 740 23.8 17.5 15.00 12.50
T*(8,L)X*A12 14.5 FC/MC/PC3 2A 800 23.8 17.9 15.00 12.50
T*(8,L)X*A12 14.5 FC/MC/PC3 7A 840 24.0 18.7 16.00 13.00
T*(8,L)X*B12 17.5 FC/MC/PC3 5B 850 24.0 18.2 15.00 12.50
T*(8,L)X*B12 17.5 FC/MC/PC4 3B 865 24.0 18.7 16.00 13.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 18.2 15.00 12.50
T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 18.7 16.00 13.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 18.1 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 18.6 16.00 13.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 815 23.8 18.0 15.00 12.50

T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 18.5 15.00 12.50
T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.8 15.00 12.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50
T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00

T*9V*A10 14.5 FC/MC/PC32A 785 23.4 17.3 14.00 12.00
T*9V*A10 14.5 FC/MC/PC37A 790 23.6 17.7 14.00 12.00
T*9X*A10 14.5 FC/MC/PC32A 745 23.2 17.0 14.55 12.00
T*9X*A10 14.5 FC/MC/PC37A 740 23.4 17.2 14.75 12.00
T*9X*B12 17.5 FC/MC/PC35B 785 23.8 17.7 15.00 12.50
T*9X*B12 17.5 FC/MC/PC43B 800 24.0 18.7 16.00 13.00
T*9X*C16 21.0 FC/MC/PC35C 765 23.6 17.5 15.00 12.50
T*9X*C16 21.0 FC/MC/PC43C 785 24.0 18.0 16.00 13.00
T*9X*C20 21.0 FC/MC/PC35C 825 24.0 18.1 15.00 12.50

T*9X*C20 21.0 FC/MC/PC43C 790 24.0 18.1 16.00 13.00
C*(8,L)C*A12 14.5 FC/MC/PC32A 755 23.4 17.3 15.00 12.50
C*(8,L)C*A12 14.5 FC/MC/PC37A 765 23.8 17.7 15.00 12.50
C*(8,L)C*B12 17.5 FC/MC/PC35B 785 23.6 17.6 15.00 12.50
C*(8,L)C*B12 17.5 FC/MC/PC43B 790 24.0 18.0 15.00 12.50
C*(8,L)C*C16 21.0 FC/MC/PC35C 775 23.6 17.6 15.00 12.50
C*(8,L)C*C16 21.0 FC/MC/PC43C 770 24.0 17.8 16.00 13.00
C*(8,L)C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50
C*(8,L)C*C20 21.0 FC/MC/PC43C 740 23.8 17.5 15.00 12.50

C*9C*B12 17.5 FC/MC/PC35B 815 23.8 18.0 15.00 12.50

C*9C*B12 17.5 FC/MC/PC43B 800 24.0 18.5 15.00 12.50

C*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.8 15.00 12.50
C*9C*C16 21.0 FC/MC/PC43C 810 24.0 18.6 16.00 13.00
C*9C*C20 21.0 FC/MC/PC35C 755 23.6 17.4 15.00 12.50

C*9C*C20 21.0 FC/MC/PC43C 890 24.0 19.1 16.00 13.00
T*(8,L)V*A12 14.5 FC/MC/PC3 7A 950 28.4 21.2 15.00 12.50
T*(8,L)V*B12 17.5 FC/MC/PC4 3B 1045 28.8 22.2 15.00 12.50

T*(8,L)V*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 15.00 12.50
T*(8,L)V*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 15.00 12.50

T*(8,L)X*A12 14.5 FC/MC/PC3 7A 1090 29.2 23.0 15.00 12.50
T*(8,L)X*B12 17.5 FC/MC/PC4 3B 1090 29.2 23.0 15.00 12.50

T*(8,L)X*C16 21.0 FC/MC/PC43C 955 28.8 21.6 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC/PC43C 870 28.2 20.6 15.00 12.50
T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 15.00 12.50

COIL

MODEL

COOLING

1

RATED

CFM

NET MBH

TOTAL SENS.

2

SEER EER

6 Johnson Controls Unitary Products

COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B030F3(C)

HC6B036F3(C)

HC6B042F4(C)

For notes, see Page 8.

FURNACE

MODEL WIDTH

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 15.00 12.50
T*9(C,V)*C20 21.0 FC/MC/PC43C 995 28.8 21.8 15.00 12.50

T*9X*B12 17.5 FC/MC/PC43B 1095 29.4 23.0 15.00 12.50

T*9X*C16 21.0 FC/MC/PC43C 1055 29.4 23.0 15.00 12.50
C*(8,L)C*A12 14.5 FC/MC/PC37A 950 28.4 21.2 15.00 12.50
C*(8,L)C*B12 17.5 FC/MC/PC43B 1045 28.8 22.2 15.00 12.50
C*(8,L)C*C16 21.0 FC/MC/PC43C 1035 29.0 22.4 15.00 12.50
C*(8,L)C*C20 21.0 FC/MC/PC43C 1025 29.2 22.4 15.00 12.50

C*9C*B12 17.5 FC/MC/PC43B 1035 28.8 22.0 15.00 12.50

C*9C*C16 21.0 FC/MC/PC43C 1030 28.8 22.2 15.00 12.50

C*9C*C20 21.0 FC/MC/PC43C 995 28.8 21.8 15.00 12.50
T*(8,L)V*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 15.00 12.50
T*(8,L)V*C16 21.0 FC/PC60C 1185 34.8 25.6 15.00 12.50
T*(8,L)V*C16 21.0 UC48C 1210 34.6 26.0 15.00 12.50
T*(8,L)V*C16 21.0 UC60C 1195 34.4 25.6 15.00 12.50
T*(8,L)V*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 15.00 12.50
T*(8,L)V*C20 21.0 FC/PC60C 1215 35.0 26.4 15.00 12.50
T*(8,L)V*C20 21.0 UC48C 1155 34.6 26.0 15.00 12.50
T*(8,L)V*C20 21.0 UC60C 1215 34.4 25.6 15.00 12.50
T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 34.8 26.0 15.00 12.50
T*(8,L)X*C16 21.0 FC/PC60C 1190 34.8 25.8 15.00 12.50
T*(8,L)X*C16 21.0 UC48C 1185 34.8 26.2 15.00 12.50
T*(8,L)X*C16 21.0 UC60C 1190 34.6 25.8 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 35.4 27.0 15.00 12.50
T*(8,L)X*C20 21.0 FC/PC60C 1275 35.4 27.2 15.00 12.50
T*(8,L)X*C20 21.0 UC48C 1270 35.0 26.8 15.00 12.50
T*(8,L)X*C20 21.0 UC60C 1275 34.8 26.6 15.00 12.50

T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 15.00 12.50
T*9(C,V)*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 15.00 12.50

T*9X*C16 21.0 FC/MC/PC48C 1280 35.2 27.0 15.00 12.50
T*9X*C16 21.0 FC/PC60C 1315 35.4 27.4 15.00 12.50
T*9X*C16 21.0 UC48C 1280 34.8 26.8 15.00 12.50
T*9X*C16 21.0 UC60C 1300 34.8 26.8 15.00 12.50
T*9X*C20 21.0 FC/MC/PC48C 1205 34.6 25.8 15.00 12.50
T*9X*C20 21.0 FC/PC60C 1240 35.2 26.8 15.00 12.50
T*9X*C20 21.0 UC48C 1205 34.6 26.0 15.00 12.50
T*9X*C20 21.0 UC60C 1240 34.4 25.6 15.00 12.50
T*9X*D20 24.5 FC/MC/PC48D 1240 35.2 26.8 15.00 12.50
T*9X*D20 24.5 FC/MC/PC60D 1310 35.6 27.6 15.00 12.50
T*9X*D20 24.5 UC48D 1240 34.6 26.0 15.00 12.50

T*9X*D20 24.5 UC60D 1310 35.0 27.0 15.00 12.50
C*(8,L)C*C16 21.0 FC/MC/PC48C 1195 34.6 25.8 15.00 12.50
C*(8,L)C*C16 21.0 FC/PC60C 1185 34.8 25.6 15.00 12.50
C*(8,L)C*C16 21.0 UC48C 1210 34.6 26.0 15.00 12.50
C*(8,L)C*C16 21.0 UC60C 1195 34.4 25.6 15.00 12.50
C*(8,L)C*C20 21.0 FC/MC/PC48C 1150 34.6 25.8 15.00 12.50
C*(8,L)C*C20 21.0 FC/PC60C 1215 35.0 26.4 15.00 12.50
C*(8,L)C*C20 21.0 UC48C 1155 34.6 26.0 15.00 12.50
C*(8,L)C*C20 21.0 UC60C 1215 34.4 25.6 15.00 12.50

C*9C*D20 24.5 FC/MC/PC48D 1240 35.0 26.6 15.00 12.50

C*9C*D20 24.5 FC/MC/PC60D 1225 35.0 26.4 15.00 12.50
T*(8,L)V*C16 21.0 FC/MC62D 1420 40.0 29.2 14.50 12.00
T*(8,L)V*C16 21.0 FC/PC60C 1185 39.0 27.6 15.00 12.50
T*(8,L)V*C16 21.0 UC60C 1195 39.0 27.8 15.00 12.50
T*(8,L)V*C20 21.0 FC/MC62D 1365 39.5 28.4 14.50 12.00
T*(8,L)V*C20 21.0 FC/PC60C 1215 39.5 28.4 15.00 12.50

COIL

MODEL

1

RATED

CFM

COOLING

NET MBH

TOTAL SENS.

2

632152-CTG-E-0812

SEER EER

Johnson Controls Unitary Products 7

632152-CTG-E-0812

COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)

UNIT

MODEL

HC6B042F4(C)

HC6B048F3(C)

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FURNACE

MODEL WIDTH

COIL

MODEL

1

RATED

CFM

16 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES

T*(8,L)V*C20 21.0 UC60C 1215 39.0 27.8 15.00 12.50
T*(8,L)X*C16 21.0 FC/MC62D 1360 40.0 28.6 15.00 12.50
T*(8,L)X*C16 21.0 FC/PC60C 1190 39.5 27.6 15.00 12.50
T*(8,L)X*C16 21.0 UC60C 1190 39.5 28.0 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC62D 1485 40.5 30.2 15.00 12.50
T*(8,L)X*C20 21.0 FC/PC60C 1275 40.0 29.2 15.00 12.50

T*(8,L)X*C20 21.0 UC60C 1275 40.0 28.8 15.00 12.50
T*9(C,V)*C16 21.0 FC/MC62D 1445 39.5 29.0 14.00 11.65
T*9(C,V)*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00
T*9(C,V)*C16 21.0 UC60C 1235 39.0 27.6 14.50 12.10
T*9(C,V)*C20 21.0 FC/MC62D 1445 40.0 29.4 14.00 11.65
T*9(C,V)*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00
T*9(C,V)*C20 21.0 UC60C 1330 39.5 29.0 14.50 12.00
T*9(C,V)*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 15.00 12.50
T*9(C,V)*D20 24.0 FC/MC62D 1455 40.0 29.6 14.50 12.00
T*9(C,V)*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00

T*9X*C16 21.0 FC/MC62D 1460 40.0 29.8 14.50 12.00
T*9X*C16 21.0 FC/PC60C 1315 40.5 29.6 15.00 12.50
T*9X*C16 21.0 UC60C 1315 39.5 29.0 15.00 12.50
T*9X*C20 21.0 FC/MC62D 1460 40.5 29.8 14.50 12.00
T*9X*C20 21.0 FC/PC60C 1240 40.0 28.8 15.00 12.50
T*9X*C20 21.0 UC60C 1240 39.0 27.8 15.00 12.50
T*9X*D20 24.0 FC/MC/PC60D 1310 40.5 29.8 15.00 12.50
T*9X*D20 24.0 FC/MC62D 1425 40.0 29.4 14.50 12.00

T*9X*D20 24.0 UC60D 1310 40.0 29.2 15.00 12.50
C*(8,L)C*C16 21.0 FC/MC62D 1420 40.0 29.2 14.50 12.00
C*(8,L)C*C16 21.0 FC/PC60C 1185 39.0 27.6 15.00 12.50
C*(8,L)C*C16 21.0 UC60C 1195 39.0 27.8 15.00 12.50
C*(8,L)C*C20 21.0 FC/MC62D 1365 39.5 28.4 14.50 12.00
C*(8,L)C*C20 21.0 FC/PC60C 1215 39.5 28.4 15.00 12.50
C*(8,L)C*C20 21.0 UC60C 1215 39.0 27.8 15.00 12.50

C*9C*C16 21.0 FC/MC62D 1445 39.5 29.0 14.00 11.65

C*9C*C16 21.0 FC/PC60C 1235 40.0 28.6 14.50 12.00

C*9C*C16 21.0 UC60C 1235 39.0 27.6 14.50 12.10

C*9C*C20 21.0 FC/MC62D 1445 40.0 29.4 14.00 11.65

C*9C*C20 21.0 FC/PC60C 1330 40.5 29.6 14.50 12.00

C*9C*C20 21.0 UC60C 1330 39.5 29.0 14.50 12.00

C*9C*D20 24.0 FC/MC/PC60D 1225 39.5 28.4 15.00 12.50

C*9C*D20 24.0 FC/MC62D 1455 40.0 29.6 14.50 12.00

C*9C*D20 24.0 UC60D 1225 39.0 27.8 14.50 12.00

T*(8,L)V*C16 21.0 FC64 1635 47.5 36.6 15.00 12.50
T*(8,L)V*C20 21.0 FC64 1630 47.5 36.6 15.00 12.50
T*(8,L)X*C16 21.0 FC64 1610 48.0 36.6 15.00 12.50
T*(8,L)X*C20 21.0 FC/MC62D 1665 47.0 35.8 15.00 12.50
T*(8,L)X*C20 21.0 FC64 1665 48.0 36.8 15.00 12.50

T*9(C,V)*C16 21.0 FC64 1590 47.5 36.4 15.00 12.50

T*9X*C16 21.0 FC64 1550 47.5 36.6 15.00 12.50

T*9X*C20 21.0 FC/MC62D 1595 46.5 34.8 15.00 12.50

T*9X*C20 21.0 FC64 1595 48.0 36.8 15.00 12.50

T*9X*D20 24.5 FC64 1610 47.5 36.6 15.00 12.50
C*(8,L)C*C16 21.0 FC64 1635 47.5 36.6 15.00 12.50
C*(8,L)C*C20 21.0 FC64 1630 47.5 36.6 15.00 12.50

C*9C*C16 21.0 FC64 1590 47.5 36.4 15.00 12.50

COOLING

NET MBH

TOTAL SENS.

2

SEER EER

8 Johnson Controls Unitary Products

632152-CTG-E-0812

COOLING CAPACITY - With High Efficiency Motor Furnaces

UNIT

MODEL

T*(8,L)V*C16 21.0 FC/MC62D

T*(8,L)V*C20 21.0 FC/MC62D

T*(8,L)V*C16 21.0 FC64

T*(8,L)V*C20 21.0 FC64

T*(8,L)X*C16 21.0 FC/MC62D

T*(8,L)X*C16 21.0 FC64

T*(8,L)X*C20 21.0 FC64

T*9(C,V)*C16 21.0 FC/MC62D

T*9(C,V)*C20 21.0 FC/MC62D

T*9(C,V)*D20 24.5 FC/MC62D

T*9(C,V)*C16 21.0 FC64

T*9(C,V)*C20 21.0 FC64

T*9(C,V)*D20 24.5 FC64

HC6B060F3(C)

C*(8,L)C*C16 21.0 FC/MC62D

C*(8,L)C*C20 21.0 FC/MC62D

C*(8,L)C*C16 21.0 FC64

C*(8,L)C*C20 21.0 FC64

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.

FURNACE

MODEL WIDTH STAGE

COIL

MODEL

1

16 SEER HP WITH HIGH EFFICIENCY FURNACES

1 1025 46.5 29.8
2 1635 55.5 38.5 11.45
1 1060 46.5 29.8
2 1620 55.5 39.0 11.60
1 1025 48.0 31.2
2 1635 57.0 40.0 11.75
1 1060 48.0 31.2
2 1630 57.0 40.0 11.85
1 1115 46.5 29.8
2 1610 55.5 39.0 11.65
1 1115 48.0 31.2
2 1610 57.0 40.0 11.90
1 835 45.0 28.0
2 1665 57.5 40.5 12.00
1 1040 46.5 29.8
2 1590 55.5 38.5 11.40
1 1040 46.5 29.8
2 1655 55.0 38.5 11.25
1 1085 46.5 29.8
2 1630 55.5 38.5 11.35
1 1040 48.0 31.2
2 1590 57.0 40.0 11.70
1 1040 48.0 31.2
2 1655 56.5 40.0 11.50
1 1085 48.0 31.2
2 1630 57.0 40.0 11.65

T*9X*C16 21.0 FC64

T*9X*C16 21.0 FC/MC62D

T*9X*C20 21.0 FC/MC62D

T*9X*C20 21.0 FC64

T*9X*D20 24.5 FC/MC62D

T*9X*D20 24.5 FC64

1 1085 48.0 31.2
2 1550 57.0 40.0 11.85
1 1085 46.5 29.8
2 1550 55.5 39.0 11.60
1 1220 47.5 31.2
2 1595 55.5 38.5 11.70
1 1220 49.5 32.6
2 1595 57.0 40.0 12.00
1 1240 48.0 31.4
2 1610 55.0 38.5 11.50
1 1240 49.5 32.8
2 1610 57.0 40.0 11.85
1 1025 46.5 29.8
2 1635 55.5 38.5 11.45
1 1060 46.5 29.8
2 1620 55.5 39.0 11.60
1 1025 48.0 31.2
2 1635 57.0 40.0 11.75
1 1060 48.0 31.2
2 1630 57.0 40.0 11.85

C*9C*C16 21.0 FC/MC62D

C*9C*C20 21.0 FC/MC62D

C*9C*D20 24.5 FC/MC62D

C*9C*C16 21.0 FC64

C*9C*C20 21.0 FC64

C*9C*D20 24.5 FC64

1 1040 46.5 29.8
2 1590 55.5 38.5 11.40
1 1040 46.5 29.8
2 1655 55.0 38.5 11.25
1 1085 46.5 29.8
2 1630 55.5 38.5 11.35
1 1040 48.0 31.2
2 1590 57.0 40.0 11.70
1 1040 48.0 31.2
2 1655 56.5 40.0 11.50
1 1085 48.0 31.2
2 1630 57.0 40.0 11.65

RATED

CFM

2

Johnson Controls Unitary Products 9

COOLING
NET MBH

TOTAL SENS.

SEER EER

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

15.00

20.80

20.80

21.60

21.60

20.80

21.60

20.35

20.80

20.80

20.80

21.60

21.60

21.60

21.60

20.80

20.35

21.10

20.50

21.25

20.80

20.80

21.60

21.60

20.80

20.80

20.80

21.60

21.60

21.60

632152-CTG-E-0812

\

HEATING CAPACITY - With Air Handler Coils

UNIT

MODEL

AIR HANDLER

MODEL

COIL

MODEL

1

RATED

CFM

MBH COP KW MBH COP KW STD

47F17FHSPF

HEATING

2

16 SEER HP WITH AIR HANDLERS

AHE24B –

AHE30B –

79523.83.881.8015.12.561.738.50

515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40

795 23.8 3.88 1.80 15.1 2.56 1.73 8.50

515* 23.4 3.63 1.92 15.1 2.56 1.73 8.40

AHR24B – 740 24.2 3.64 1.95 15.1 2.40 1.84 7.85

710 24.0 3.70 1.90 15.2 2.44 1.83 9.00

470* 23.8 3.54 1.97 14.6 2.38 1.80 8.50

775 24.0 3.78 1.86 15.3 2.50 1.79 9.00

500* 24.0 3.74 1.88 14.8 2.52 1.72 8.50

760 24.0 4.08 1.72 15.3 2.70 1.66 9.00

485* 24.0 3.80 1.85 14.8 2.56 1.69 8.50

725 23.8 3.92 1.78 14.8 2.66 1.63 9.00

630* 23.8 3.74 1.86 14.6 2.52 1.70 8.85

800 24.0 3.82 1.84 15.0 2.54 1.73 8.50

600* 23.8 3.54 1.97 14.6 2.38 1.80 8.50

800 24.0 4.02 1.76 14.9 2.70 1.62 9.00

600* 23.8 3.62 1.93 14.6 2.44 1.75 8.55

815 23.8 3.92 1.78 14.8 2.60 1.67 9.00

660* 23.8 3.70 1.88 14.5 2.48 1.71 8.95

735 23.8 3.90 1.79 14.8 2.64 1.64 9.00
620* 23.8 3.68 1.89 14.5 2.48 1.71 8.90
1000 29.4 4.02 2.14 19.0 2.78 2.00 9.00
600* 29.1 3.73 2.28 19.0 2.78 2.00 8.80

HC6B024F3(C)

AHV24B –

AHV30B –

AHV36C –

AV*36 –

MV12B FC/MC35B

MV12B FC/MC43B

MX12B FC/MC35B

MX12B FC/MC43B

AHE36C –
AHR36B – 1060 30.0 4.00 2.17 19.9 2.78 2.00 9.15

895 29.6 3.88 2.24 19.1 2.72 2.06 9.00
640* 28.8 3.68 2.29 18.8 2.54 2.17 9.00

960 29.4 4.02 2.14 18.9 2.80 1.98 9.00
725* 28.9 3.75 2.26 18.9 2.80 1.98 9.00
1000 29.6 3.88 2.24 19.1 2.72 2.06 9.00
800* 29.0 3.72 2.28 18.8 2.54 2.17 9.00

HC6B030F3(C)

AHV36C –

AV*36 –

MV12B FC/MC43B
MV16C FC/MC43C 1000 29.6 3.96 2.19 19.0 2.76 2.02 9.00
MX12B FC/MC43B

1095 29.8 4.04 2.16 19.1 2.78 2.01 9.00
620* 29.1 3.73 2.28 19.0 2.78 2.00 8.80

MX16C FC/MC43C 970 28.8 3.76 2.24 18.8 2.66 2.07 9.00

AHE42D –

118035.63.982.6223.22.782.459.00
685* 35.0 3.40 3.29 23.2 2.80 2.43 8.80

AHE48D – 1195 35.0 3.90 2.62 23.2 2.76 2.45 9.00
AHR42C – 1230 37.0 3.78 2.87 24.0 2.64 2.66 7.85

1180 36.0 3.68 2.87 23.6 2. 50 2.77 9.00
790* 35.8 3.66 2.87 22.8 2.72 2.46 8.50
1155 36.0 3.62 2.91 23.6 2. 44 2.83 9.00
835* 35.6 3.64 2.87 22.6 2.66 2.49 8.50
1220 36.0 4.20 2.55 23.2 2.92 2.33 9.00
960* 36.0 3.40 3.19 23.2 2.92 2.33 9.00
1160 36.0 3.98 2.65 23.2 2. 80 2.43 9.00

1000* 36.0 3.40 3.29 23.2 2.80 2.43 9.00

1135 36.0 4.10 2.60 23.2 2. 86 2.38 9.00

1000* 36.0 3.40 3.24 23.2 2.86 2.38 9.00

1200 36.0 3.92 2.71 23.4 2.76 2.48 9.00

1000* 36.0 3.40 3.35 23.4 2.76 2.48 9.00

1225 35.6 3.96 2.63 23.2 2.80 2.43 9.00
850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80
1275 35.6 4.20 2.48 23.2 2.88 2.36 9.00
850* 35.0 3.40 3.29 23.2 2.80 2.43 8.80
1150 35.8 3.96 2.65 23.0 2. 80 2.41 9.00
995* 35.6 3.62 2.88 22.8 2.70 2.47 8.95

HC6B036F3(C)

AHV42D –

AHV48D –

AV*48 –

MV12D FC/MC48D

MV12D FC/MC60D

MV16C FC/MC48C

MX12D FC/MC48D

MX12D FC/MC60D

MX16C FC/MC48C

For notes, see Page 11.

10 Johnson Controls Unitary Products

632152-CTG-E-0812

HEATING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

AIR HANDLER

MODEL

COIL

MODEL

1

RATED

CFM

MBH COP KW MBH COP KW STD

47F17F HSPF

HEATING

16 SEER HP WITH AIR HANDLERS

AHE48D –

AHE60D –

120040.53.883.0625.62.682.808.50

1000* 39.5 3.98 2.91 25.8 2.86 2.64 9.20

138540.04.122.8425.42.762.709.00

1150* 39.5 3.98 2.91 25.4 2.76 2.70 8.98

AHR60D – 1350 41.0 3.94 3.05 26.2 2.66 2.89 7.80

115540.53.843.0925.62.662.828.50
875*39.53.902.9726.02.742.789.00

134040.04.042.9025.62.742.748.50
955*39.53.982.9125.42.762.709.00

120041.04.082.9425.62.802.688.50

1000* 40.0 3.84 3.05 25.4 2.74 2.72 8.98

HC6B042F4(C)

AHV48D –

AHV60D –

AV*48 – 122041.04.122.9225.62.822.669.00
MV16C FC60C
MV20D FC/MC60D 1300 41.0 4.16 2.89 25.6 2.84 2.64 8.50
MV20D FC/MC62D

MX16C FC60C

140040.54.102.8925.62.762.728.50

1300* 40.0 4.12 2.84 25.4 2.70 2.76 8.98

115040.54.122.8825.42.822.649.00
995*40.03.903.0125.22.762.688.98

MX20D FC/MC60D 1295 41.0 4.24 2.83 25.4 2.88 2.58 9.00
MX20D FC/MC62D

AHE60D –

147040.04.242.7625.42.842.629.00

1260* 39.5 4.12 2.81 25.4 2.72 2.74 8.98

156547.03.803.6233.42.703.629.00

1160* 46.8 3.33 4.30 33.4 2.72 3.60 8.80

AHR60D – 1620 51.0 3.64 4.11 34.2 2.60 3.85 7.85
AHV60D –

HC6B048F3(C)

MV20D FC/MC62D

MV20D FC64

MX20D FC/MC62D

MX20D FC64

1. Rated CFM same as for cooling.

2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb ) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping
and no supplemental electric heat operation.

* Notates “Hot Heat Pump” performance. These ratings are not AHRI Listed.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input
during the same period.
— = Not Applicable.
MA Modular Air Handlers use Coil Only Ratings.

157048.03.743.7633.82.663.729.00

1000* 48.0 3.34 4.21 32.0 2.52 3.72 8.50

163048.03.783.9133.62.703.659.00

1000* 48.0 3.29 4.38 33.6 2.70 3.65 9.00

163048.03.943.7934.02.783.589.00

1000* 48.0 3.45 4.26 34.0 2.78 3.58 9.00

160547.03.863.5733.22.763.529.00

1260* 46.9 3.56 4.03 32.4 2.62 3.62 8.80

1605 47.0 3.98 3.46 33.6 2.82 3.49 9.00

1260* 46.9 3.66 3.92 32.6 2.72 3.51 8.85

2

Johnson Controls Unitary Products 11