TECHNICAL GUIDE
Echelon
R-410A SPLIT-SYSTEM AIR CONDITIONERS
18 SEER
MODELS: AC8B024 THRU 060
(2 THRU 5 NOMINAL TONS)
ISO 9001
Certified Quality
Management System
Due to continuous product improvement, specific a t ion s
are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be foun d at
www.ahridirectory.org
LISTED
350155-CTG-C-0808
DESCRIPTION
The AC8B Series condensing unit is the outdoor part of a versatile
air conditioning system. It is designed to be custom matched with
one of our complete line of evaporator sections, each designed to
serve a specific function. Matching air handlers are available for
upflow, downflow, and horizontal lef t or right appl ication to pr ovide a
complete system. Electric heaters are available if required. Add-on
coils are available for use with upflow, downflow, or horizontal furnaces. Field installed accessories are available as needed.
WARRANTY
5-year limited parts warranty.
10-year limited compressor warranty.
Premium System Warranty - Limited lifetime compressor and 10year parts when matched with an approved Coleman Echelon furnace or UPG air handler and coil.
FEATURES
• Superior Coil Protection – A PVC coated steel coil guard completely protects coil from debris and other large damaging material while a polymer mesh further protects the coil against
smaller particles.
• Isolated Compressor Compartment – A molded composite
bulkhead isolates the compressor from the rest of the u nit red ucing sound and vibration.
• Protected Compressors – Each compressor is protected
against abnormal pressures by an internal pressure relief valve
and factory installed high and low pressure controls. Additional
protection against moisture and debris is provided by factory
installed liquid line filter driers.
• Environmentally Friendly Refrigerant – Next generation
refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate
protection from harmful U.V. rays and rust creep ensuring longlasting high quality appearance. A powder-paint topcoat is
applied over a baked-on primer, using a galvanized, zinc coated
steel base material. The result is a finish that has been p roven in
testing to provide 33% greater durability than conventional powder-coat finishes.
• Lower Installed Cost – Designed to provide enhanced installability by featuring a slide-down control compartment and angled
service valves to reduce overall install ation time and cost.
• Low Operating Sound Levels – A fan design boasting technology adapted from aeronautic and defense engineering provides
for whisper quiet operation by allowing airflow to flow smoothly
and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filter-drier
filters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel
with handle makes for easy entry to internal components.
• Composite Base - Strong and durable composite base pan
resists rust and corrosion while it helps reduce vibrations and
noise.
• Whisper drive system - Features combination of swept-wing
fan, composite base pan, isolated compressor compartment and
two-stage compressor to reduce overall sound to a mere whisper.
• Low RPM fan motor - Helps to reduce airflow noise.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor
application. The unit is certified in accordance with the Unitary
Small Equipment cerification program, which is based on ARI
Standard 210/240.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
350155-CTG-C-0808
Physical and Electrical Data
MODEL
AC8B024F1 AC8B036F1 AC8B048F1 AC8B060F1
Unit Supply Voltage 208-230V, 1φ, 60Hz
Normal Voltage Range
1
187 to 252
Minimum Circuit Ampacity 15.6 23.6 29.2 34.8
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps
2
3
25 40 50 60
20 25 30 35
Multi-stage Compressor Yes Yes Yes Yes
Compressor Type Scroll Scroll Scroll Scroll
Compressor Amps
Rated Load 10.3 16.7 21.2 25.6
Locked Rotor 52 82 96 118
Crankcase Heater No No No No
Fan Motor Amps Rated Load 2.8 2.8 2.8 2.8
Fan Diameter Inches 24 24 24 24
Rated HP 1/3 1/3 1/3 1/3
Fan Motor
Nominal RPM 685 685 685 685
Nominal CFM 2900 3200 3100 3150
Face Area Sq. Ft. 23.58 23.58 23.58 23.58
Coil
Rows Deep 2 2 2 2
Fins / Inch 16 16 14 14
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 7/8 7/8
Unit Charge (Lbs. - Oz.)
4
15 - 1 13 - 7 12 - 9 13 - 5
Charge Per Foot, Oz. 0.62 0.62 0.67 0.67
Operating Weight Lbs. 305 305 310 330
1 Rated in accordance with ARI Standard 110, utilization range “A”.
2 Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3 Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4 The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet,
add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.
VAPOR
LIQUID
2-3/8
3-1/8
6-1/2
All dimensions are in inches. They are subject to change without notice.
Certified dimensions will be provided upon request.
Unit
Model
Dimensions
(Inches)
Refrigerant
Connection
Service Valve Size
A B C Liquid Vapor
A
36 39-1/2 42 34
48 39-1/2 42 34
3/8”
60 39-1/2 42 34
24 39-1/2 42 34
C
B
3/4”
7/8”
2 Johnson Controls Unitary Products
350155-CTG-C-0808
Additional R-410A Charge / TXV Size for Va rious Matched Systems
Outdoor Unit AC8B024F1 AC8B036F1 AC8B048F1 AC8B060F1
Approved System Thermal Expansion Valve
Factory Charge, lbs-oz 16 - 2 15 - 14 13 - 8 14 - 1
Indoor Coil
FC/MC/PC32A 1 – – –
FC/MC/PC35B 0 – – –
FC/MC/PC35C 0 – – –
FC/MC/PC37A 7 24 – –
FC/MC/PC43B 7 24 – –
FC/MC/PC43C 7 24 – –
FC/MC/PC48C 17 7 10 –
FC/MC/PC48D 17 7 10 –
FC/PC60C –––0
FC/MC/PC60D – – – 0
FC/MC62D – 39 15 12
HC36B 0 – – –
HC42C – 24 – –
HC60D – – 1 0
UC48D 17 7 10 –
UC60D – – – 0
AV36C 7 0 – –
AV/SV48D – – 1 –
AV/SV60D – – 0 0
F4FV060D – – 1 0
FOOTNOTES:
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of intercon-
2. Verify the TXV and additional charge required for specific evaporator coil in the system using the above table.
3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified on the previous page.
4. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evap-
2
1 Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.
2 PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
3 A TXV kit must be used with these coils to obtain system performance.
Note: If a TXV is factory installed on the coil, it must be replaced with the listed TXV.
necting line tubing.
orator + adder for line set.
1
1TVM(902/4F1) 1TVM(904/4H1) 1TVM(905/4J1) 1TVM(906/4K1)
TXV Kit3 - Additional Charge, Oz
Johnson Controls Unitary Products 3
350155-CTG-C-0808
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER
MODEL W STAGE
COIL
MODEL
1
RATED
CFM
1 PH 18 SEER AC WITH MV
1 620 18.2 13.8
2 800 23.6 17.2 13.80
1 620 18.2 13.8
2 800 23.6 17.2 13.80
1 620 18.5 14.0
2 800 24.0 17.5 14.00
1 620 18.5 14.0
2 800 24.0 17.5 14.00
1 645 18.9 14.3
2 835 24.6 17.9 14.45
1 775 25.6 18.0
2 1200 36.0 25.2 13.55
1 775 25.7 18.1
2 1200 36.2 25.3 14.00
1 735 25.6 18.0
2 1135 36.0 25.2 13.95
1 775 25.9 18.2
2 1200 36.4 25.4 14.15
1 735 25.7 18.1
2 1135 36.6 25.6 14.25
1 1000 34.0 25.1
2 1600 46.0 35.1 12.45
1 1000 34.0 25.1
2 1600 46.0 35.1 12.45
1 1020 34.0 25.1
2 1600 46.0 35.1 12.35
1 1020 34.1 25.2
2 1600 46.5 35.5 12.50
1 1030 40.2 27.3
2 1800 55.5 40.5 11.55
1 1030 42.1 28.6
2 1800 58.0 42.3 12.00
AC8B024F1
AC8B036F1
AC8B048F1
AC8B060F1
MV12B 17 FC/MC/PC35B
MV12B 17 FC/MC/PC35C
MV12B 17 FC/MC/PC43B
MV12B 17 FC/MC/PC43C
MV12D 24 FC/MC/PC48D
MV12B 17 FC/MC/PC43B
MV16C 21 FC/MC/PC43C
MV12D 24 FC/MC/PC48D
MV16C 21 FC/MC/PC48C
MV12D 24 FC/MC62D
MV16C 21 FC/MC/PC48C
MV16C 21 FC/MC/PC48D
MV20D 24 FC/MC/PC48D
MV20D 24 FC/MC62D
MV20D 24 FC/MC/PC60D
MV20D 24 FC/MC62D
1 PH 18 SEER AC WITH AV/SV
AC8B024F1 AV36C 21 N / A
AC8B036F1 AV36C 21 N / A
V
/SV48D 24 N / A
A
AC8B048F1
AV/SV60D 24 N / A
AC8B060F1 AV/SV60D 24 N / A
1 600 18.4 13.9
2 765 23.8 17.3 14.10
1 830 25.7 18.1
2 1270 35.6 24.9 13.45
1 1135 33.1 24.4
2 1610 44.5 34.0 12.10
1 1085 33.0 24.4
2 1655 44.5 34.0 12.10
1 1145 41.5 28.2
2 1765 55.5 40.5 11.65
1 PH 18 SEER AC WITH F*F*
AC8B048F1 F4FV060 24 N / A
AC8B060F1 F4FV060 24 N / A
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.
Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1 1200 33.6 24.8
2 1600 44.5 34.0 12.15
1 1200 41.8 28.4
2 1780 55.5 40.5 11.60
COOLING
NET MBH SEER EER
17.05
17.05
17.20
17.20
18.00
17.70
18.00
18.40
18.40
18.50
17.30
17.30
17.00
17.00
15.30
16.00
17.60
18.00
16.60
16.50
15.70
16.85
15.55
14.50
14.50
14.65
14.65
15.25
14.90
15.00
15.40
15.40
15.40
14.20
14.20
14.00
14.05
12.55
13.20
14.95
15.25
13.60
13.60
13.00
13.75
12.80
1 MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
4 Johnson Controls Unitary Products
COOLING CAPACITY - AC8B024F1 With Variable Speed Furnaces
VARIABLE SPEED
FURNACE MODEL
(F,L)C8V*A12 FC/MC/PC32A 14
(F,L)C9V*A12 FC/MC/PC32A 14
(F,L)C9(C,V)*B12 FC/MC/PC35B 17
(F,L)C8V*A12 FC/MC/PC37A 14
(F,L)C9V*A12 FC/MC/PC37A 14
(F,L)C9(C,V)*B12 FC/MC/PC43B 14
(F,L)C9(C,V)*B12 HC36B 17
C*(8,L)C*A12 FC/MC/PC30A 14
C*(8,L)C*B12 FC/MC/PC30B 17
C*9C*B12 FC/MC/PC30B 17
C*(8,L)C*A12 FC/MC/PC32A 14
C*(8,L)C*B12 FC/MC/PC35B 17
C*9C*B12 FC/MC/PC35B 17
C*(8,L)C*A12 FC/MC/PC36A 14
C*(8,L)C*B12 FC/MC/PC36B 17
C*9C*B12 FC/MC/PC36B 17
C*(8,L)C*A12 FC/MC/PC37A 14
C*(8,L)C*B12 FC/MC/PC43B 17
C*9C*B12 FC/MC/PC43B 17
C*(8,L)C*A12 HC30 14
C*(8,L)C*A12 HD36 14
C*(8,L)C*B12 HD36 17
C*9C*B12 HD36 17
C*(8,L)C*A12 UC30A 14
C*(8,L)C*B12 UC30B 17
C*9C*B12 UC30B 17
C*(8,L)C*A12 UC36A 14
For Notes See Page 6.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 470 17.2 13.0
2 750 23.2 16.9 13.55
1 625 18.1 13.7
2 800 23.2 16.9 13.05
1 560 17.9 13.6
2 820 23.4 17.0 13.45
1 470 17.4 13.2
2 750 23.6 17.2 13.75
1 625 18.6 14.1
2 800 23.6 17.2 13.30
1 560 18.1 13.7
2 820 24.0 17.5 13.70
1 560 17.9 13.6
2 820 23.4 17.0 13.55
1 590 17.7 13.1
2 805 23.0 16.3 13.50
1 565 17.8 13.1
2 815 23.2 16.3 13.50
1 565 17.7 13.1
2 790 23.0 16.3 13.50
1 550 17.5 12.7
2 775 23.0 16.1 13.25
1 515 17.4 12.4
2 760 23.0 16.1 13.50
1 550 17.5 12.7
2 815 23.2 16.5 13.25
1 595 17.8 13.3
2 805 23.0 16.4 13.50
1 525 17.5 12.6
2 765 23.0 16.2 13.75
1 590 17.9 13.2
2 815 23.2 16.6 13.50
1 585 18.0 13.3
2 805 23.6 16.7 13.50
1 515 17.5 12.6
2 760 23.4 16.3 13.75
1 550 17.8 12.9
2 800 23.6 16.7 13.75
1 550 17.4 12.6
2 775 22.8 15.9 13.25
1 595 17.5 12.6
2 805
1 515 17.0 11.9
2 760 22.6 15.5 13.25
1 590 17.5 12.6
2 815 23.0 15.7 13.50
1 590 17.7 13.2
2 805 23.2 16.3 13.50
1 565 17.8 13.3
2 815 23.2 16.3 13.75
1 565 17.8 13.2
2 790 23.2 16.3 13.50
1 595 17.0 12.8
2 805 22.4 15.7 13.00
RATED
CFM
COOLING
NET MBH
TOTAL SENSIBLE
2
23.0 15.7 13.25
350155-CTG-C-0808
SEER EER
16.70
16.60
17.05
17.00
17.00
17.35
17.10
16.75
17.00
16.75
16.50
16.50
16.50
17.00
16.75
16.75
16.75
16.75
17.00
16.25
16.50
16.00
16.50
16.75
17.25
17.00
16.00
14.15
14.25
14.55
14.35
14.60
14.70
14.55
14.25
14.50
14.25
14.00
14.00
14.25
14.25
14.25
14.25
14.25
14.25
14.25
13.75
14.00
13.75
14.00
14.25
14.50
14.25
13.75
Johnson Controls Unitary Products 5
350155-CTG-C-0808
COOLING CAPACITY - AC8B024F1 With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
C*(8,L)C*B12 UC36B 17
C*9C*B12 UC36B 17
G*9V*A12 FC/MC/PC30A 14
G*9V*A12 FC/MC/PC32A 14
G*9V*A12 FC/MC/PC36A 14
G*9V*A12 FC/MC/PC37A 14
G*9V*A12 HC30 14
G*9V*A12 HD36 14
G*9V*A12 UC30A 14
G*9V*A12 UC36A 14
G*9V*B12 FC/MC/PC30B 17
G*9V*B12 FC/MC/PC35B 17
G*9V*B12 FC/MC/PC36B 17
G*9V*B12 FC/MC/PC43B 17
G*9V*B12 HD36 17
G*9V*B12 UC30B 17
G*9V*B12 UC36B 17
1 MC coils available with a factory installed horizontal drain pan.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 525 16.6 11.9
2 765 22.2 15.5 13.25
1 590 17.0 12.8
2 815 22.4 15.7 13.00
1 625 17.8 13.4
2 800 23.0 16.2 13.25
1 625 17.8 13.4
2 800 23.0 16.3 13.00
1 625 17.9 13.5
2 800 22.8 16.3 13.00
1 535 17.6 12.7
2 800 23.4 16.6 13.25
1 625 17.7 13.3
2 800 22.8 16.0 13.00
1 625 17.6 12.7
2 800 22.8 15.5 13.00
1 625 18.0 13.4
2 800 23.2 16.2 13.25
1 625 17.1 12.8
2 800 22.2 15.6 12.75
1 565 17.7 13.1
2 790 23.0 16.3 13.50
1 550 17.5 12.7
2 815 23.2 16.5 13.25
1 590 17.9 13.2
2 815 23.2 16.6 13.50
1 550 17.8 12.9
2 800 23.6 16.7 13.75
1 590 17.5 12.6
2 815 23.0 15.7 13.50
1 565 17.8 13.2
2 790 23.2 16.3 13.50
1 590 17.0 12.8
2 818 22.4 15.7 13.00
RATED
CFM
TOTAL SENSIBLE
COOLING
NET MBH
2
SEER EER
16.00
16.00
16.50
16.25
16.50
16.25
16.25
16.00
16.50
15.75
16.75
16.50
16.75
17.00
16.50
17.00
16.00
13.50
13.75
14.00
14.00
14.00
14.00
13.75
13.75
14.00
13.25
14.25
14.25
14.25
14.25
14.00
14.25
13.75
6 Johnson Controls Unitary Products
COOLING CAPACITY - AC8B036F1With Variable Speed Furnaces
VARIABLE SPEED
FURNACE MODEL
(F,L)C8V*A12 FC/MC/PC37A 14
(F,L)C9V*A12 FC/MC/PC37A 14
(F,L)C8V*B16 FC/MC/PC43B 17
(F,L)C8V*C16 FC/MC/PC43C 21
(F,L)C8V*C20 FC/MC/PC43C 21
(F,L)C9(C,V)*B12 FC/MC/PC43B 17
(F,L)C9(C,V)*C16 FC/MC/PC43C 21
(F,L)C9(C,V)*C20 FC/MC/PC43C 21
(F,L)C8V*C16 FC/MC/PC48C 21
(F,L)C8V*C16 UC48D 21
(F,L)C8V*C20 FC/MC/PC48C 21
(F,L)C9(C,V)*C16 FC/MC/PC48C 21
(F,L)C9(C,V)*C16 UC48D 21
(F,L)C9(C,V)*C20 FC/MC/PC48C 21
(F,L)C9(C,V)*C20 UC48D 21
(F,L)C9(C,V)*D20 FC/MC/PC48D 24
(F,L)C9(C,V)*D20 UC48D 24
(F,L)C8V*C20 FC/MC62D 21
(F,L)C9(C,V)*C20 FC/MC62D 21
(F,L)C9(C,V)*D20 FC/MC62D 24
(F,L)C8V*C16 HC42C 21
(F,L)C8V*C20 HC42C 21
(F,L)C9(C,V)*C16 HC42C 21
(F,L)C9(C,V)*C20 HC42C 21
C*(8,L)C*B12 FC/MC/PC35B 17
C*(8,L)C*C16 FC/MC/PC35C 21
C*(8,L)C*C20 FC/MC/PC35C 21
C*9C*B12 FC/MC/PC35B 17
For Notes See Page 10.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 750 25.4 17.9
2 1185 35.8 25.0 13.25
1 780 25.6 18.0
2 1200 35.6 24.9 13.00
1 750 25.4 17.9
2 1200 36.0 25.2 13.70
1 640 24.6 17.3
2 1200 36.2 25.3 13.80
1 780 25.7 18.1
2 1200 36.0 25.2 13.50
1 770 25.6 18.0
2 1185 35.6 24.9 13.25
1 770 25.7 18.1
2 1175 35.8 25.0 13.60
1 790 25.8 18.1
2 1195 36.0 25.2 13.65
1 640 24.7 17.4
2 1200 36.4 25.4 14.00
1 640 24.7 17.4
2 1200 36.4 25.4 14.00
1 780 25.9 18.2
2 1200 36.2 25.3 13.55
1 770 25.9 18.2
2 1175 36.2 25.3 13.80
1 770 25.9 18.2
2 1175 36.2 25.3 13.80
1 790 25.9 18.2
2 1195 36.2 25.3 13.75
1 790 25.9 18.2
2 1195 36.2 25.3 13.75
1 775 25.9 18.2
2 1220 36.4 25.4 13.90
1 775 25.9 18.2
2 1220 36.4 25.4 13.90
1 780 26.0 18.3
2 1200 36.6 25.6 13.70
1 790 26.0 18.3
2 1195 36.6 25.6 13.90
1 775 26.0 18.3
2 1220 36.8 25.7 14.05
1 640 24.6 17.3
2 120
1 780 25.7 18.1
2 1200 36.0 25.2 13.50
1 770 25.6 18.0
2 1175 36.0 25.2 13.75
1 790 25.8 18.1
2 1195 36.0 25.2 13.65
1 745 24.6 16.7
2 1220 35.0 24.3 12.50
1 815 25.0 17.5
2 1235 35.4 24.7 13.25
1 960 25.8 19.2
2 1170 35.2 24.3 13.25
1 810 25.0 17.4
2 1190 35.2 24.5 12.75
RATED
CFM
0
350155-CTG-C-0808
COOLING
NET MBH
TOTAL SENSIBLE
2
36.2 25.3 13.85
SEER EER
17.50
17.50
17.80
17.70
17.90
17.60
18.00
17.90
18.20
18.20
18.35
18.40
18.40
18.20
18.20
18.30
18.30
18.35
18.20
18.25
17.80
18.05
18.25
17.90
17.00
17.25
17.25
16.75
14.80
14.75
14.90
14.80
15.10
14.85
15.30
15.05
15.15
15.15
15.45
15.60
15.60
15.25
15.25
15.40
15.40
15.40
15.25
15.30
14.85
15.20
15.25
15.05
14.25
14.25
14.25
14.00
Johnson Controls Unitary Products 7
350155-CTG-C-0808
COOLING CAPACITY - AC8B036F1With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
C*9C*C16 FC/MC/PC35C 21
C*9C*C20 FC/MC/PC35C 21
C*(8,L)C*A12 FC/MC/PC36A 14
C*(8,L)C*B12 FC/MC/PC36B 17
C*(8,L)C*C16 FC/MC/PC36C 21
C*(8,L)C*C20 FC/MC/PC36C 21
C*9C*B12 FC/MC/PC36B 17
C*9C*C16 FC/MC/PC36C 21
C*9C*C20 FC/MC/PC36C 21
C*(8,L)C*A12 FC/MC/PC37A 14
C*(8,L)C*B12 FC/MC/PC42B 17
C*(8,L)C*C16 FC/MC/PC42C 21
C*(8,L)C*C20 FC/MC/PC42C 21
C*9C*B12 FC/MC/PC42B 17
C*9C*C16 FC/MC/PC42C 21
C*9C*C20 FC/MC/PC42C 21
C*(8,L)C*B12 FC/MC/PC43B 17
C*(8,L)C*C16 FC/MC/PC43C 21
C*(8,L)C*C20 FC/MC/PC43C 21
C*9C*B12 FC/MC/PC43B 17
C*9C*C16 FC/MC/PC43C 21
C*9C*C20 FC/MC/PC43C 21
C*(8,L)C*C16 FC/MC/PC48C 21
C*(8,L)C*C20 FC/MC/PC48C 21
C*9C*C16 FC/MC/PC48C 21
C*9C*C20 FC/MC/PC48C 21
C*(8,L)C*C16 HC42 21
C*(8,L)C*C20 HC42 21
For Notes See Page 10.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 790 25.0 17.5
2 1215 35.4 24.7 13.00
1 760 24.6 16.8
2 1330 35.6 25.3 12.75
1 815 24.8 17.3
2 1190 34.6 23.7 12.50
1 745 24.6 16.7
2 1220 34.8 24.1 12.75
1 805 25.0 17.4
2 1235 34.8 24.1 13.00
1 800 25.0 17.4
2 1240 35.0 24.1 13.25
1 800 25.0 17.3
2 1165 34.8 23.9 12.75
1 915 25.4 18.2
2 1185 34.6 24.1 13.00
1 760 24.6 16.8
2 1320 35.2 25.1 12.75
1 655 24.2 15.9
2 980 34.2 22.7 13.00
1 760 24.6 16.9
2 1175 34.8 24.1 13.00
1 825 25.0 17.6
2 1205 35.4 24.7 13.50
1 735 24.8 17.0
2 1170 35.0 24.3 13.50
1 800 25.0 17.5
2 1195 34.8 24.3 12.50
1 780 24.6 16.9
2 1205 34.8 24.3 13.25
1 770 24.8 17.0
2 1325 35.4 25.5 13.00
1 745 24.8 16.9
2 1210 35.4 24.9 12.75
1 800 25.2 17.6
2 1205 35.8 25.1 13.50
1 745 24.8 17.0
2 1190 35.8 25.1 13.50
1 815 25.0 17.5
2 1200 35.4 24.9 12.75
1 815 25.2 17.5
2 1240 35.6 25.1 13.00
1 780 24.8 16.9
2 1200 35.8 25.1 13.25
1 810 25.6 17.9
2 1210 36.4 25.7 13.75
1 720 24.8 16.9
2 1155 36.2 25.1 13.75
1 780 25.6 17.9
2 1195 36.2 25.5 13.50
1 745 24.8 17.1
2 1330 36.6 26.5 13.25
1 800 25.0 17.6
2 1205 35.8 25.1 13.50
1 745 24.8 17.0
2 1190 35.8 25.1 13.50
RATED
CFM
TOTAL SENSIBLE
COOLING
NET MBH
2
SEER EER
17.25
17.00
16.75
17.00
17.50
17.50
17.00
17.25
17.25
16.75
17.25
17.50
17.50
17.00
17.25
17.25
17.25
17.50
17.50
17.00
.25
17
17.25
17.75
17.50
17.75
17.50
17.50
17.50
14.25
14.25
14.00
14.25
14.50
14.50
14.25
14.25
14.25
14.00
14.25
14.50
14.50
14.25
14.25
14.25
14.25
14.50
14.50
14.25
14
.25
14.25
14.75
14.50
14.75
14.50
14.50
14.50
8 Johnson Controls Unitary Products
COOLING CAPACITY - AC8B036F1With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
C*9C*C16 HC42 21
C*9C*C20 HC42 21
C*(8,L)C*B12 HD48 17
C*9C*B12 HD48 17
C*(8,L)C*C16 HD48 21
C*(8,L)C*C20 HD48 21
C*9C*C16 HD48 21
C*9C*C20 HD48 21
C*(8,L)C*A12 UC36A 14
C*(8,L)C*B12 UC36B 17
C*(8,L)C*C16 UC36C 21
C*(8,L)C*C20 UC36C 21
C*9C*B12 UC36B 17
C*9C*C16 UC36C 21
C*9C*C20 UC36C 21
C*(8,L)C*B12 UC42B 17
C*(8,L)C*C16 UC42C 21
C*(8,L)C*C20 UC42C 21
C*9C*B12 UC42B 17
C*9C*C16 UC42C 21
C*9C*C20 UC42C 21
C*(8,L)C*C16 UC48C 21
C*(8,L)C*C20 UC48C 21
C*9C*C16 UC48C 21
C*9C*C20 UC48C 21
G*9V*A12 FC/MC/PC36A 14
G*9V*A12 FC/MC/PC37A 14
G*9V*A12 UC36A 14
For Notes See Page 10.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 815 25.0 17.6
2 1240 35.6 24.9 13.00
1 780 25.0 17.6
2 1200 35.8 25.1 13.25
1 750 24.8 17.0
2 1210 35.8 25.1 13.25
1 710 24.6 16.5
2 1150 35.4 24.3 13.00
1 810 25.4 17.7
2 1210 36.0 25.3 13.75
1 720 24.8 16.7
2 1155 35.8 24.9 13.75
1 780 25.4 17.6
2 1195 36.0 25.1 13.50
1 745 24.8 16.9
2 1330 36.2 26.1 13.25
1 815 24.4 16.9
2 1190 34.0 23.3 12.25
1 745 24.0 16.3
2 1220 34.2 23.7 12.50
1 805 24.6 17.0
2 1235 34.4 23.5 13.00
1 800 24.6 17.1
2 1240 34.4 23.5 13.00
1 800 24.4 17.0
2 1165 34.2 23.5 12.75
1 915 25.0 17.8
2 1185 34.4 23.7 13.00
1 760 24.2 16.5
2 1300 34.8 24.9 12.75
1 760 24.4 16.8
2 1175 34.6 23.9 13.00
1 825 24.8 17.4
2 1205 35.0 24.5 13.50
1 735 24.4 16.8
2 1170 35.0 24.1 13.50
1 800 24.8 17.3
2 1195 34.6 24.1 12.50
1 780 24.4 16.7
2 1205 34.8 23.9 13.00
1 770 24.4 16.9
2 132
1 810 25.0 17.7
2 1210 35.6 25.3 13.50
1 720 24.4 16.7
2 1155 35.4 24.7 13.50
1 780 25.0 17.7
2 1195 35.6 25.1 13.25
1 755 24.6 17.1
2 1330 35.8 25.9 13.00
1 780 24.6 16.9
2 1200 34.2 23.7 12.25
1 800 25.0 17.5
2 1100 34.8 23.7 12.75
1 780 24.2 16.6
2 1200 34.0 23.5 12.25
RATED
CFM
TOTAL SENSIBLE
5
35.4 25.1 13.00
COOLING
NET MBH
2
350155-CTG-C-0808
SEER EER
17.25
17.50
17.25
17.00
17.75
17.50
17.50
17.25
16.50
16.75
17.25
17.25
16.75
17.00
16.75
17.00
17.25
17.25
16.75
17.00
17.00
17.50
17.25
17.50
17.25
16.75
16.75
16.25
14.25
14.50
14.50
14.25
14.75
14.50
14.75
14.50
13.75
14.00
14.25
14.25
14.00
14.00
14.00
14.25
14.50
14.25
14.00
14.25
14.25
14.50
14.25
14.50
14.25
14.00
14.00
13.75
Johnson Controls Unitary Products 9
350155-CTG-C-0808
COOLING CAPACITY - AC8B036F1With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
G*9V*B12 FC/MC/PC35B 17
G*9V*C16 FC/MC/PC35C 21
G*9V*C20 FC/MC/PC35C 21
G*9V*B12 FC/MC/PC36B 17
G*9V*C16 FC/MC/PC36C 21
G*9V*C20 FC/MC/PC36C 21
G*9V*B12 FC/MC/PC42B 17
G*9V*C16 FC/MC/PC42C 21
G*9V*C20 FC/MC/PC42C 21
G*9V*B12 FC/MC/PC43B 17
G*9V*C16 FC/MC/PC43C 21
G*9V*C20 FC/MC/PC43C 21
G*9V*C16 FC/MC/PC48C 21
G*9V*C20 FC/MC/PC48C 21
G*9V*C16 HC42 21
G*9V*C20 HC42 21
G*9V*B12 HD48 17
G*9V*C16 HD48 21
G*9V*C20 HD48 21
G*9V*B12 UC36B 17
G*9V*C16 UC36C 21
G*9V*C20 UC36C 21
G*9V*B12 UC42B 17
G*9V*C16 UC42C 21
G*9V*C20 UC42C 21
G*9V*C16 UC48C 21
G*9V*C20 UC48C 21
1 MC coils available with a factory installed horizontal drain pan.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 810 25.0 17.4
2 1190 35.2 24.5 12.75
1 790 25.0 17.5
2 1215 35.4 24.7 13.00
1 760 24.6 16.8
2 1330 35.6 25.3 12.75
1 800 25.0 17.3
2 1165 34.8 23.9 12.75
1 915 25.4 18.2
2 1185 34.6 24.1 13.00
1 760 24.6 16.8
2 1320 35.2 25.1 12.75
1 800 25.0 17.5
2 1195 34.8 24.3 12.50
1 780 24.6 16.9
2 1205 34.8 24.3 13.25
1 770 24.8 17.0
2 1325 35.4 25.5 13.00
1 815 25.0 17.5
2 1200 35.4 24.9 12.75
1 815 25.2 17.5
2 1240 35.6 25.1 13.00
1 780 24.8 16.9
2 1200 35.8 25.1 13.25
1 780 25.6 17.9
2 1195 36.2 25.5 13.50
1 745 24.8 17.1
2 1330 36.6 26.5 13.25
1 815 25.0 17.6
2 1240 35.6 24.9 13.00
1 780 25.0 17.6
2 1200 35.8 25.1 13.25
1 710 24.6 16.5
2 1150 35.4 24.3 13.00
1 780 25.4 17.6
2 1195 36.0 25.1 13.50
1 745 24.8 16.9
2 1330 36.2 26.1 13.25
1 800 24.4 17.0
2 1165 34.2 23.5 12.75
1 915 25.0 17.8
2 1185 34.4 23.7 13.00
1 760 24.2 16.5
2 1300 34.8 24.9 12.75
1 800 24.8 17.3
2 1195 34.6 24.1 12.50
1 780 24.4 16.7
2 1205 34.8 23.9 13.00
1 770 24.4 16.9
2 1325 35.4 25.1 13.00
1 780 25.0 17.7
2 1195 35.6 25.1 13.25
1 755 24.6 17.1
2 1330 35.8 25.9 13.00
RATED
CFM
TOTAL SENSIBLE
COOLING
NET MBH
2
SEER EER
16.75
17.25
17.00
17.00
17.25
17.25
17.00
17.25
17.25
17.00
17.25
17.25
17.75
17.50
17.25
17.50
17.00
17.50
17.25
16.75
.00
17
16.75
16.75
17.00
17.00
17.50
17.25
14.00
14.25
14.25
14.25
14.25
14.25
14.25
14.25
14.25
14.25
14.25
14.25
14.75
14.50
14.25
14.50
14.25
14.75
14.50
14.00
14
.00
14.00
14.00
14.25
14.25
14.50
14.25
10 Johnson Controls Unitary Products
COOLING CAPACITY - AC8B048F1With Variable Speed Furnaces
VARIABLE SPEED
FURNACE MODEL
(F,L)C8V*C16 FC/MC/PC48C 21
(F,L)C8V*C16 UC48D 21
(F,L)C8V*C20 FC/MC/PC48C 21
(F,L)C8V*C20 UC48D 21
(F,L)C9(C,V)*C16 FC/MC/PC48C 21
(F,L)C9(C,V)*C16 UC48D 21
(F,L)C9(C,V)*C20 FC/MC/PC48C 21
(F,L)C9(C,V)*C20 UC48D 21
(F,L)C9(C,V)*D20 FC/MC/PC48D 24
(F,L)C9(C,V)*D20 UC48D 24
(F,L)C8V*C20 FC/MC62D 21
(F,L)C9(C,V)*C20 FC/MC62D 21
(F,L)C9(C,V)*D20 FC/MC62D 24
(F,L)C9(C,V)*D20 HC60D 24
C*(8,L)C*C16 FC/MC/PC48C 21
C*(8,L)C*C20 FC/MC/PC48C 21
C*9C*C16 FC/MC/PC48C 21
C*9C*C20 FC/MC/PC48C 21
C*9C*D20 FC/MC/PC48D 24
C*(8,L)C*C16 FC/PC60C 21
C*(8,L)C*C20 FC/PC60C 21
C*9C*C16 FC/PC60C 21
C*9C*C20 FC/PC60C 21
C*9C*D20 FC/MC/PC60D 24
C*9C*D20 FC/MC62D 24
C*9C*D20 HC60 24
C*(8,L)C*C16 HD48 21
For Notes See Page 13.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 880 33.0 24.4
2 1500 45.0 34.4 11.95
1 880 33.0 24.4
2 1500 45.0 34.4 11.95
1 1030 34.1 25.2
2 1610 45.5 34.8 12.05
1 1030 34.1 25.2
2 1610 45.5 34.8 12.05
1 1090 34.6 25.6
2 1600 45.5 34.8 11.85
1 1090 34.6 25.6
2 1600 45.5 34.8 11.85
1 1010 33.9 25.0
2 1580 45.5 34.8 12.05
1 1010 33.9 25.0
2 1580 45.5 34.8 12.05
1 985 33.8 25.0
2 1560 45.5 34.8 12.20
1 985 33.8 25.0
2 1560 45.5 34.8 12.20
1 1030 34.2 25.3
2 1610 46.0 35.1 12.20
1 1010 34.1 25.2
2 1580 46.0 35.1 12.15
1 985 33.9 25.0
2 1560 46.0 35.1 12.30
1 985 32.3 23.9
2 1560 44.0 33.6 11.85
1 1035 33.4 24.6
2 1615 45.5 34.6 11.75
1 1080 33.4 24.4
2 1640 45.5 34.4 11.75
1 1050 33.4 24.6
2 1590 45.5 34.1 11.75
1 1055 33.4 24.6
2 1655 45.5 34.1 11.75
1 1060 33.0 24.2
2 1645 45.0 34.0 11.50
1 1035 32.6 23.8
2 1625 44.5 33.8 11.75
1 1015 32.6 23.8
2 160
1 1050 32.4 23.8
2 1590 44.5 33.6 11.50
1 1055 32.6 23.8
2 1655 44.5 33.6 11.50
1 1070 32.4 23.8
2 1615 44.5 33.8 11.75
1 1085 33.0 24.4
2 1630 45.0 34.0 11.75
1 1070 32.0 23.6
2 1615 44.0 33.6 11.50
1 1035 32.8 24.0
2 1615 45.5 33.9 11.75
RATED
CFM
5
350155-CTG-C-0808
COOLING
NET MBH
TOTAL SENSIBLE
2
45.0 34.0 12.00
SEER EER
16.90
16.90
17.10
17.10
17.50
17.50
16.90
16.90
16.95
16.95
17.20
16.80
17.00
16.25
16.50
16.25
16.25
16.50
16.25
16.25
16.25
16.00
16.00
16.00
16.25
15.75
16.25
13.90
13.90
14.15
14.15
14.50
14.50
13.95
13.95
13.95
13.95
14.25
14.00
14.00
13.25
13.50
13.50
13.50
13.50
13.25
13.25
13.50
13.25
13.25
13.25
13.50
13.00
13.50
Johnson Controls Unitary Products 11
350155-CTG-C-0808
COOLING CAPACITY - AC8B048F1With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
C*(8,L)C*C20 HD48 21
C*9C*C16 HD48 21
C*9C*C20 HD48 21
C*9C*D20 HD48 24
C*(8,L)C*C16 HD60 21
C*(8,L)C*C20 HD60 21
C*9C*C16 HD60 21
C*9C*C20 HD60 21
C*9C*D20 HD60 24
C*(8,L)C*C16 UC48C 21
C*(8,L)C*C20 UC48C 21
C*9C*C16 UC48C 21
C*9C*C20 UC48C 21
C*9C*D20 UC48D 24
C*(8,L)C*C16 UC60C 21
C*(8,L)C*C20 UC60C 21
C*9C*C16 UC60C 21
C*9C*C20 UC60C 21
C*9C*D20 UC60D 24
G*9V*C16 FC/MC/PC48C 21
G*9V*C20 FC/MC/PC48C 21
G*9V*D20 FC/MC/PC48D 24
G*9V*C16 FC/PC60C 21
G*9V*C20 FC/PC60C 21
G*9V*D20 FC/MC/PC60D 24
G*9V*D20 FC/MC62D 24
G*9V*D20 HC60 24
G*9V*C16 HD48 21
For Notes See Page 13.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 1080 32.8 24.0
2 1640 45.5 33.7 11.75
1 1050 33.0 24.0
2 1590 45.0 33.5 11.75
1 1055 33.0 24.0
2 1655 45.0 33.5 11.75
1 1060 32.8 24.0
2 1645 45.5 33.7 11.75
1 1035 33.6 24.6
2 1625 45.5 34.6 12.00
1 1015 33.6 24.6
2 1605 45.5 34.8 12.00
1 1050 33.4 24.6
2 1590 45.5 34.6 11.75
1 1055 33.6 24.6
2 1655 45.5 34.6 11.75
1 1070 33.6 24.6
2 1615 45.5 34.6 11.75
1 1035 31.8 23.4
2 1615 44.0 33.4 11.50
1 1080 31.8 23.4
2 1640 44.0 33.4 11.50
1 1050 31.8 23.8
2 1590 43.5 33.0 11.25
1 1055 31.8 23.8
2 1630 43.5 33.0 11.25
1 1060 29.8 22.0
2 1570 42.0 31.1 11.00
1 1035 30.0 21.4
2 1570 42.0 31.1 11.25
1 1015 30.0 21.4
2 1590 42.5 31.3 11.50
1 1050 30.0 21.2
2 1570 42.0 31.1 11.00
1 1055 30.0 21.4
2 1570 42.0 31.1 11.00
1 1070 30.0 21.2
2 1570 42.0 31.1 11.00
1 1050 33.4 24.6
2 1590 45.5 34.1 11.75
1 1055 33.4 24.6
2 1655 45.5 34.1 11.75
1 1060 33.0 24.2
2 1645 45.0 34.0 11.50
1 1050 32.4 23.8
2 1590 44.5 33.6 11.50
1 1055 32.6 23.8
2 1655 44.5 33.6 11.50
1 1070 32.4 23.8
2 1615 44.5 33.8 11.75
1 1085 33.0 24.4
2 1630 45.0 34.0 11.75
1 1070 32.0 23.6
2 1615 44.0 33.6 11.50
1 1050 33.0 24.0
2 1590 45.0 33.5 11.75
RATED
CFM
TOTAL SENSIBLE
COOLING
NET MBH
2
SEER EER
16.00
16.25
16.25
16.25
16.75
16.75
16.25
16.50
16.50
15.75
15.50
15.50
15.75
14.75
15.00
15.00
14.75
14.75
14.75
16.25
.50
16
16.25
16.00
16.00
16.00
16.25
15.75
16.25
13.25
13.25
13.50
13.25
13.75
14.00
13.50
13.75
13.50
13.00
12.75
12.75
12.75
12.00
12.25
12.25
12.00
12.00
12.00
13.50
13
.50
13.25
13.25
13.25
13.25
13.50
13.00
13.25
12 Johnson Controls Unitary Products
COOLING CAPACITY - AC8B048F1With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
G*9V*C20 HD48 21
G*9V*D20 HD48 24
G*9V*C16 HD60 21
G*9V*C20 HD60 21
G*9V*D20 HD60 24
G*9V*C16 UC48C 21
G*9V*C20 UC48C 21
G*9V*D20 UC48D 24
G*9V*C16 UC60C 21
G*9V*C20 UC60C 21
G*9V*D20 UC60D 24
1 MC coils available with a factory installed horizontal drain pan.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.
COIL
MODEL
1
W
STAGE
RATED
CFM
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
1 1055 33.0 24.0
2 1655 45.0 33.5 11.75
1 1060 32.8 24.0
2 1645 45.5 33.7 11.75
1 1050 33.4 24.6
2 1590 45.5 34.6 11.75
1 1055 33.6 24.6
2 1655 45.5 34.6 11.75
1 1070 33.6 24.6
2 1615 45.5 34.6 11.75
1 1050 31.8 23.8
2 1590 43.5 33.0 11.25
1 1055 31.8 23.8
2 1630 43.5 33.0 11.25
1 1060 29.8 22.0
2 1570 42.0 31.1 11.00
1 1050 30.0 21.2
2 1570 42.0 31.1 11.00
1 1055 30.0 21.4
2 1570 42.0 31.1 11.00
1 1070 30.0 21.2
2 1570 42.0 31.1 11.00
TOTAL SENSIBLE
COOLING
NET MBH
2
350155-CTG-C-0808
SEER EER
16.25
16.25
16.25
16.50
16.50
15.50
15.75
14.75
14.75
14.75
14.75
13.50
13.25
13.50
13.75
13.50
12.75
12.75
12.00
12.00
12.00
12.00
COOLING CAPACITY - AC8B060F1 With Variable Speed Furnaces
VARIABLE SPEED
FURNACE MODEL
(F,L)C8V*C20 FC/PC60C 21
(F,L)C8V*C20 UC60D 21
(F,L)C9(C,V)*C20 FC/PC60C 21
(F,L)C9(C,V)*C20 UC60D 21
(F,L)C9(C,V)*D20 FC/MC/PC60D 24
(F,L)C9(C,V)*D20 UC60D 24
(F,L)C8V*C20 FC/MC62D 21
(F,L)C9(C,V)*C20 FC/MC62D 21
(F,L)C9(C,V)*D20 FC/MC62D 24
(F,L)C9(C,V)*D20 HC60D 24
C*(8,L)C*C20 FC/PC60C 21
C*9C*C20 FC/PC60C 21
For Notes See Page 14.
COIL
MODEL
1
W
STAGE
RATED
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
1 1120 41.0 27.8
2 1730 55.0 40.1 11.40
1 1120 41.0 27.8
2 1730 55.0 40.1 11.40
1 1075 40.4 27.4
2 1650 54.0 39.4 11.25
1 1075 40.4 27.4
2 1650 54.0 39.4 11.25
1 1020 40.2 27.3
2 1620 54.0 39.4 11.45
1 1020 40.2 27.3
2 1620 54.0 39.4 11.45
1 1120 42.8 29.1
2 1730 57.0 41.6 11.70
1 1075 42.4 28.8
2 1650 56.5 41.2 11.65
1 1020 42.0 28.5
2 1620 56.5 41.2 11.80
1 1020 40.1 27.2
2 1620 54.5 39.7 11.50
1 1015 40.0 26.0
2 1605 55.0 36.1 11.25
1 1055 40.0 25.8
2 1655 54.5 35.9 11.00
CFM
COOLING
NET MBH
TOTAL SENSIBLE
2
SEER EER
15.45
15.45
15.25
15.25
15.25
15.25
16.10
15.95
15.90
15.30
15.25
15.00
12.75
12.75
12.55
12.55
12.55
12.55
13.35
13.25
13.20
12.55
12.50
12.25
Johnson Controls Unitary Products 13
350155-CTG-C-0808
COOLING CAPACITY - AC8B060F1 With Variable Speed Furnaces (Continued)
VARIABLE SPEED
FURNACE MODEL
C*9C*D20 FC/MC62D 24
C*9C*D20 HC60 24
C*(8,L)C*C20 HD60 21
C*9C*C20 HD60 21
C*9C*D20 HD60 24
C*(8,L)C*C20 UC60C 21
C*9C*C20 UC60C 21
C*9C*D20 UC60D 24
G*9V*C20 FC/PC60C 21
G*9V*D20 FC/MC62D 24
G*9V*D20 HC60 24
G*9V*C20 HD60 21
G*9V*D20 HD60 24
G*9V*C20 UC60C 21
G*9V*D20 UC60D 24
1 MC coils available with a factory installed horizontal drain pan.
2 Variable speed furnaces have B.O.D (Blower on Delay) standard.
COIL
1
MODEL
1 PH 18 SEER AC WITH VARIABLE SPEED FURNACES
W
STAGE
1 1085 40.5 26.3
2 1630 55.0 36.3 11.25
1 1070 39.0 25.4
2 1615 53.5 34.9 10.75
1 1015 40.5 25.8
2 1605 55.5 36.1 11.50
1 1055 40.5 26.3
2 1655 55.5 36.3 11.00
1 1070 40.5 26.5
2 1615 54.5 35.5 11.00
1 1015 38.5 24.6
2 1605 53.5 34.6 11.00
1 1055 38.5 24.6
2 1655 53.0 34.4 10.75
1 1070 38.5 25.0
2 1615 53.5 34.6 10.75
1 1055 40.0 25.8
2 1655 54.5 35.9 11.00
1 1085 40.5 26.3
2 1630 55.0 36.3 11.25
1 1070 39.0 25.4
2 1615 53.5 34.9 10.75
1 1055 40.5 26.3
2 1655 55.5 36.3 11.00
1 1070 40.5 26.5
2 1615 54.5 35.5 11.00
1 1055 38.5 24.6
2 1655 53.0 34.4 10.75
1 1070 38.5 25.0
2 1615 53.5 34.6 10.75
RATED
CFM
TOTAL SENSIBLE
COOLING
NET MBH
2
SEER EER
15.00
14.50
15.25
15.25
15.25
14.50
14.25
14.50
15.00
15.00
14.50
15.25
15.25
14.25
14.50
12.50
12.00
12.50
12.50
12.50
12.00
11.75
11.75
12.25
12.50
12.00
12.50
12.50
11.75
11.75
ACCESSORIES*
Hard Start Kit (024-31994-000, 024-31995-000) - Provides
increased starting torque for areas with low voltage.
TXV Kits - 1TVM9 series thermal expansion valves precisely
meter refrigerant for optimum performance
Dehumidistat (2HU16700124) - Provides increased dehumidi-
fication when matched with variable speed furnace or air handler.
SOUND POWER RATINGS*
UNIT MODEL (dBA)
024 71
036 73
048 72
060 74
* Rated in accordance with ARI 270-95 Standards.
Room Thermostats - A wide selection of compatible thermostats are available to provide optimum performance and features for any installation.
1 Heat Stage only, manual, mechanical thermostat. Add subbase for 3H/2C.
3H/2C, manual changeover electronic non-programmable thermostat.
3H/2C, auto/manual changeover, electronic programmable,
deluxe 7-day, thermostat.
3H/2C, auto/manual changeover, electronic programmable.
* For the most current accessory information, refer to the price
book or consult factory.
14 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B024F1
INDOOR COIL MODEL NO. FC48D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 550 600 650
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 18.6 19.9 18.9 21.7 23.9 19.0 19.9 19.1 21.8 24.4 19.4 20.0 19.3 22.0 24.9
S.C. 18.6 17.5 14.9 14.8 11.7 19.2 18.5 15.6 15.5 12.1 19.7 19.4 16.2 16.2 12.5
K.W. 0.76 0.75 0.76 0.74 0.74 0.75 0.75 0.75 0.73 0.74 0.75 0.75 0.75 0.73 0.74
T.C. 17.8 18.8 18.0 20.6 22.8 18.3 18.9 18.3 20.9 23.2 18.7 19.1 18.5 21.1 23.6
S.C. 17.9 17.1 14.5 14.4 11.3 18.4 17.9 15.1 15.1 11.8 18.9 18.6 15.8 15.9 12.2
K.W. 0.93 0.92 0.93 0.91 0.90 0.92 0.92 0.92 0.90 0.90 0.91 0.91 0.92 0.90 0.90
T.C. 17.1 17.6 17.1 19.5 21.6 17.5 17.9 17.4 19.9 22.0 17.9 18.2 17.7 20.2 22.3
S.C. 17.2 16.8 14.0 14.0 10.9 17.7 17.3 14.7 14.8 11.4 18.1 17.9 15.4 15.5 11.9
K.W. 1.09 1.09 1.09 1.08 1.06 1.08 1.08 1.09 1.07 1.06 1.07 1.08 1.08 1.06 1.05
T.C. 16.4 16.5 16.2 18.5 20.5 16.8 16.9 16.6 18.9 20.8 17.1 17.2 16.9 19.4 21.0
S.C. 16.5 16.4 13.6 13.7 10.5 17.0 16.8 14.3 14.4 11.1 17.4 17.2 15.0 15.1 11.7
K.W. 1.26 1.26 1.26 1.24 1.22 1.24 1.25 1.25 1.24 1.22 1.24 1.24 1.25 1.23 1.21
T.C. 15.3 15.4 14.9 17.0 19.0 15.7 15.8 15.2 17.3 19.1 16.0 16.2 15.5 17.7 19.3
S.C. 15.4 15.2 13.0 13.2 10.1 15.8 15.6 13.6 13.9 10.5 16.2 16.0 14.3 14.5 11.0
K.W. 1.48 1.49 1.49 1.47 1.45 1.47 1.48 1.48 1.47 1.45 1.46 1.47 1.48 1.46 1.45
T.C. 14.2 14.3 13.6 15.5 17.5 14.6 14.7 13.9 15.8 17.6 15.0 15.1 14.1 16.1 17.7
S.C. 14.4 14.1 12.4 12.8 9.6 14.7 14.5 13.0 13.4 10.0 15.1 14.9 13.5 13.9 10.4
K.W. 1.70 1.71 1.71 1.70 1.68 1.69 1.70 1.70 1.69 1.67 1.68 1.69 1.70 1.68 1.67
T.C. 13.1 13.2 12.3 14.0 15.9 13.5 13.6 12.5 14.3 16.0 13.9 14.0 12.7 14.5 16.1
S.C. 13.3 13.0 11.8 12.3 9.2 13.6 13.4 12.3 12.9 9.5 14.0 13.8 12.8 13.4 9.7
K.W. 1.92 1.93 1.93 1.92 1.91 1.91 1.92 1.93 1.91 1.90 1.91 1.91 1.92 1.91 1.90
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Air Handler Coil
AV36C – 0.97 0.97 0.99
MV12B FC/MC/PC35B 0.96 0.97 1.01
MV12B FC/MC/PC35C 0.96 0.97 1.01
MV12B FC/MC/PC35B 0.98 0.98 1.02
MV12B FC/MC/PC35C 0.98 0.98 1.02
MV12D FC/MC/PC48D 1.00 1.00 1.00
Variable Speed
Furnace
(F,L)C8V*A12 FC/MC/PC32A 0.91 0.91 0.98
(F,L)C9V*A12 FC/MC/PC32A 0.96 0.96 1.02
(F,L)C9(C,V)*B12 FC/MC/PC35B 0.95 0.95 0.99
(F,L)C8V*A12 FC/MC/PC37A 0.92 0.92 0.98
(F,L)C9V*A12 FC/MC/PC37A 0.98 0.99 1.03
(F,L)C9(C,V)*B12 FC/MC/PC43B 0.96 0.96 0.99
(F,L)C9(C,V)*B12 HC36B 0.95 0.95 0.99
C*(8,L)C*A12 FC/MC/PC30A 0.95 0.91 1.01
C*(8,L)C*B12 FC/MC/PC30B 0.96 0.92 1.00
C*9C*B12 FC/MC/PC30B 0.95 0.91 1.01
C*(8,L)C*A12 FC/MC/PC32A 0.94 0.89 1.01
C*(8,L)C*B12 FC/MC/PC35B 0.93 0.86 1.00
C*9C*B12 FC/MC/PC35B 0.94 0.89 1.00
C*(8,L)C*A12 FC/MC/PC36A 0.96 0.92 1.00
C*(8,L)C*B12 FC/MC/PC36B 0.94 0.88 0.99
C*9C*B12 FC/MC/PC36B 0.96 0.92 1.01
C*(8,L)C*A12 FC/MC/PC37A 0.97 0.93 1.02
C*(8,L)C*B12 FC/MC/PC43B 0.94 0.88 0.99
Coil
T.C. S.C. KW
T.C. S.C. KW
Variable Speed
Furnace
C*9C*B12 FC/MC/PC43B 0.96 0.90 1.00
C*(8,L)C*A12 HC30 0.93 0.88 1.01
C*(8,L)C*A12 HD36 0.94 0.88 1.01
C*(8,L)C*B12 HD36 0.91 0.83 1.00
C*9C*B12 HD36 0.94 0.88 1.01
C*(8,L)C*A12 UC30A 0.95 0.92 1.01
C*(8,L)C*B12 UC30B 0.96 0.92 1.00
C*9C*B12 UC30B 0.95 0.92 1.01
C*(8,L)C*A12 UC36A 0.91 0.89 1.01
C*(8,L)C*B12 UC36B 0.89 0.83 1.00
C*9C*B12 UC36B 0.91 0.89 1.01
G*9V*A12 FC/MC/PC30A 0.96 0.93 1.03
G*9V*B12 FC/MC/PC30B 0.95 0.91 1.01
G*9V*A12 FC/MC/PC32A 0.96 0.94 1.03
G*9V*B12 FC/MC/PC35B 0.94 0.89 1.00
G*9V*A12 FC/MC/PC36A 0.96 0.94 1.03
G*9V*B12 FC/MC/PC36B 0.96 0.92 1.01
G*9V*A12 FC/MC/PC37A 0.94 0.88 1.02
G*9V*B12 FC/MC/PC43B 0.96 0.90 1.00
G*9V*A12 HC30 0.95 0.92 1.03
G*9V*A12 HD36 0.95 0.88 1.03
G*9V*B12 HD36 0.94 0.88 1.01
G*9V*A12 UC30A 0.97 0.94 1.03
G*9V*B12 UC30B 0.95 0.92 1.01
G*9V*A12 UC36A 0.92 0.89 1.03
G*9V*B12 UC36B 0.91 0.89 1.01
Coil
T.C. S.C. KW
Johnson Controls Unitary Products 15
350155-CTG-C-0808
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B024F1
INDOOR COIL MODEL NO. FC48D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEA T ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 700 800 900
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 23.1 25.7 25.0 28.6 30.7 24.3 26.0 26.1 28.8 31.1 25.5 26.3 27.1 28.9 31.6
S.C. 22.6 21.4 17.9 18.3 14.5 23.8 23.1 19.5 19.1 15.3 25.0 24.8 21.0 20.0 16.1
K.W. 1.12 1.14 1.14 1.16 1.17 1.13 1.14 1.14 1.16 1.18 1.15 1.15 1.15 1.17 1.19
T.C. 22.5 24.3 23.9 27.1 29.2 23.5 24.7 24.7 27.4 29.7 24.5 25.1 25.5 27.6 30.1
S.C. 21.9 20.9 17.5 17.8 14.0 23.0 22.4 18.9 18.7 14.8 24.0 23.8 20.3 19.7 15.5
K.W. 1.31 1.32 1.32 1.34 1.35 1.31 1.32 1.32 1.34 1.36 1.33 1.33 1.33 1.35 1.37
T.C. 21.8 22.9 22.8 25.6 27.7 22.6 23.4 23.4 26.0 28.2 23.4 23.8 23.9 26.4 28.7
S.C. 21.3 20.4 17.2 17.3 13.6 22.1 21.6 18.4 18.4 14.3 22.9 22.7 19.6 19.4 15.0
K.W. 1.49 1.50 1.50 1.52 1.53 1.49 1.50 1.50 1.52 1.54 1.51 1.51 1.51 1.54 1.55
T.C. 21.2 21.5 21.8 24.0 26.2 21.8 22.1 22.1 24.6 26.7 22.4 22.5 22.3 25.2 27.2
S.C. 20.6 20.0 16.8 16.8 13.1 21.3 20.9 17.9 18.0 13.7 21.9 21.7 18.9 19.1 14.4
K.W. 1.67 1.68 1.67 1.70 1.72 1.67 1.68 1.68 1.70 1.72 1.69 1.69 1.69 1.72 1.73
T.C. 20.1 20.3 20.4 22.6 24.5 20.6 20.9 20.7 23.0 25.0 21.2 21.4 20.9 23.5 25.5
S.C. 19.5 19.0 16.2 16.3 12.6 20.1 19.8 17.2 17.3 13.2 20.7 20.5 18.2 18.4 13.8
K.W. 1.93 1.93 1.93 1.95 1.97 1.93 1.94 1.93 1.96 1.98 1.95 1.95 1.94 1.97 1.99
T.C. 19.0 19.2 19.1 21.2 22.9 19.5 19.7 19.3 21.5 23.4 20.0 20.2 19.5 21.8 23.9
S.C. 18.5 18.1 15.5 15.8 12.0 19.0 18.8 16.6 16.7 12.6 19.6 19.4 17.6 17.6 13.2
K.W. 2.17 2.18 2.17 2.20 2.23 2.18 2.18 2.18 2.21 2.23 2.20 2.20 2.19 2.22 2.24
T.C. 17.9 18.0 17.7 19.8 21.3 18.4 18.5 17.9 20.0 21.8 18.9 19.1 18.1 20.2 22.2
S.C. 17.4 17.2 14.9 15.3 11.5 17.9 17.8 15.9 16.1 12.1 18.4 18.3 16.9 16.9 12.6
K.W. 2.42 2.42 2.42 2.45 2.48 2.43 2.43 2.42 2.45 2.48 2.45 2.45 2.44 2.47 2.50
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
HIGH CFM
Air Handler Coil T.C. S.C. KW
AV36C – 0.97 0.97 0.99
MV12B FC/MC/PC35B 0.96 0.96 1.00
MV12B FC/MC/PC35C 0.96 0.96 1.00
MV12B FC/MC/PC35B 0.98 0.98 1.01
MV12B FC/MC/PC35C 0.98 0.98 1.01
MV12D FC/MC/PC48D 1.00 1.00 1.00
MV12D UC48D 1.00 1.00 1.00
Variable Speed
Furnace
(F,L)C8V*A12 FC/MC/PC32A 0.94 0.94 1.01
(F,L)C9V*A12 FC/MC/PC32A 0.94 0.94 1.04
(F,L)C9(C,V)*B12 FC/MC/PC35B 0.95 0.95 1.02
(F,L)C9(C,V)*B12 FC/MC/PC35C 0.95 0.95 1.02
(F,L)C8V*A12 FC/MC/PC37A 0.96 0.96 1.01
(F,L)C9V*A12 FC/MC/PC37A 0.96 0.96 1.04
(F,L)C9(C,V)*B12 FC/MC/PC43B 0.98 0.98 1.03
(F,L)C9(C,V)*B12 HC36B 0.95 0.95 1.01
C*(8,L)C*A12 FC/MC/PC30A 0.95 0.92 1.01
C*(8,L)C*B12 FC/MC/PC30B 0.96 0.92 1.00
C*9C*B12 FC/MC/PC30B 0.95 0.92 1.01
C*(8,L)C*A12 FC/MC/PC32A 0.95 0.92 1.02
C*(8,L)C*B12 FC/MC/PC35B 0.95 0.91 1.00
C*9C*B12 FC/MC/PC35B 0.96 0.94 1.02
C*(8,L)C*A12 FC/MC/PC36A 0.95 0.93 1.01
C*(8,L)C*B12 FC/MC/PC36B 0.95 0.92 0.99
C*9C*B12 FC/MC/PC36B 0.96 0.94 1.01
C*(8,L)C*A12 FC/MC/PC37A 0.97 0.95 1.02
Coil T.C. S.C. KW
Variable Speed
Furnace
C*(8,L)C*B12 FC/MC/PC43B 0.97 0.93 1.00
C*9C*B12 FC/MC/PC43B 0.97 0.95 1.01
C*(8,L)C*A12 HC30 0.94 0.90 1.02
C*(8,L)C*A12 HD36 0.95 0.89 1.01
C*(8,L)C*B12 HD36 0.94 0.88 1.00
C*9C*B12 HD36 0.95 0.89 1.00
C*(8,L)C*A12 UC30A 0.96 0.92 1.01
C*(8,L)C*B12 UC30B 0.96 0.93 1.00
C*9C*B12 UC30B 0.96 0.92 1.01
C*(8,L)C*A12 UC36A 0.92 0.89 1.00
C*(8,L)C*B12 UC36B 0.92 0.88 0.99
C*9C*B12 UC36B 0.92 0.89 1.00
G*9V*A12 FC/MC/PC30A 0.95 0.92 1.02
G*9V*B12 FC/MC/PC30B 0.95 0.92 1.01
G*9V*A12 FC/MC/PC32A 0.95 0.92 1.04
G*9V*B12 FC/MC/PC35B 0.96 0.94 1.02
G*9V*A12 FC/MC/PC36A 0.95 0.92 1.02
G*9V*B12 FC/MC/PC36B 0.96 0.94 1.01
G*9V*A12 FC/MC/PC37A 0.97 0.94 1.03
G*9V*B12 FC/MC/PC43B 0.97 0.95 1.01
G*9V*A12 HC30 0.95 0.91 1.02
G*9V*A12 HD36 0.94 0.88 1.02
G*9V*B12 HD36 0.95 0.89 1.00
G*9V*A12 UC30A 0.96 0.92 1.02
G*9V*B12 UC30B 0.96 0.92 1.01
G*9V*A12 UC36A 0.92 0.88 1.02
G*9V*B12 UC36B 0.92 0.89 1.00
Coil T.C. S.C. KW
16 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B036F1
INDOOR COIL MODEL NO. FC62D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 750 800 850
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 25.4 26.8 27.2 29.7 32.8 25.9 27.0 27.3 30.1 33.0 26.4 27.2 27.5 30.4 33.2
S.C. 25.0 22.9 19.4 19.3 15.3 25.6 23.7 19.9 19.8 15.7 26.1 24.6 20.4 20.2 16.1
K.W. 1.00 0.99 0.99 0.96 0.93 0.99 0.98 0.98 0.95 0.92 0.97 0.97 0.97 0.94 0.91
T.C. 24.3 25.5 25.7 28.3 31.2 24.9 25.7 25.9 28.6 31.3 25.4 26.0 26.1 28.9 31.5
S.C. 24.0 22.3 18.8 18.7 14.8 24.6 23.1 19.4 19.2 15.3 25.1 23.8 19.9 19.7 15.7
K.W. 1.24 1.23 1.23 1.20 1.17 1.22 1.22 1.22 1.19 1.16 1.21 1.21 1.21 1.18 1.16
T.C. 23.3 24.2 24.3 26.9 29.5 23.8 24.5 24.5 27.2 29.7 24.3 24.7 24.8 27.5 29.8
S.C. 23.0 21.8 18.3 18.2 14.4 23.6 22.4 18.8 18.7 14.9 24.1 23.0 19.3 19.2 15.3
K.W. 1.47 1.47 1.47 1.44 1.41 1.46 1.46 1.46 1.43 1.41 1.45 1.45 1.45 1.42 1.40
T.C. 22.2 22.9 22.8 25.4 27.9 22.7 23.2 23.1 25.8 28.0 23.3 23.5 23.4 26.1 28.2
S.C. 22.0 21.2 17.7 17.6 14.0 22.6 21.7 18.2 18.2 14.5 23.1 22.2 18.8 18.7 14.9
K.W. 1.71 1.71 1.71 1.68 1.65 1.70 1.70 1.70 1.67 1.65 1.69 1.69 1.69 1.66 1.64
T.C. 20.8 21.3 21.0 23.6 26.0 21.3 21.7 21.3 23.8 26.1 21.9 22.1 21.5 24.1 26.2
S.C. 20.6 20.0 16.8 16.8 13.4 21.2 20.5 17.4 17.4 13.7 21.7 21.0 17.9 17.9 14.1
K.W. 2.03 2.03 2.03 2.01 1.98 2.02 2.02 2.02 2.00 1.97 2.00 2.01 2.01 1.99 1.97
T.C. 19.4 19.7 19.3 21.7 24.1 20.0 20.2 19.5 22.0 24.2 20.5 20.7 19.7 22.2 24.3
S.C. 19.2 18.8 16.0 16.1 12.8 19.8 19.3 16.6 16.6 13.0 20.4 19.8 17.1 17.1 13.3
K.W. 2.34 2.33 2.34 2.32 2.30 2.33 2.33 2.33 2.31 2.29 2.31 2.32 2.32 2.30 2.28
T.C. 18.0 18.2 17.5 19.9 22.2 18.6 18.8 17.7 20.1 22.3 19.1 19.3 18.0 20.4 22.4
S.C. 17.8 17.6 15.2 15.3 12.2 18.4 18.1 15.8 15.8 12.3 19.0 18.5 16.4 16.3 12.5
K.W. 2.65 2.64 2.65 2.63 2.62 2.64 2.64 2.65 2.63 2.61 2.62 2.63 2.64 2.62 2.60
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Air Handler Coil
AV36C – 1.00 1.00 1.01
MV12B FC/MC/PC43B 1.00 0.99 1.03
MV12B FC/MC/PC43C 1.00 0.99 1.03
MV16C FC/MC/PC43C 1.00 1.00 1.03
MV12D FC/MC/PC48D 1.00 0.99 1.00
MV12D UC48D 1.00 0.99 1.00
MV16C FC/MC/PC48C 1.01 1.01 1.01
MV16C FC/MC/PC48D 1.01 1.01 1.01
MV16C UC48D 1.01 1.01 1.01
MV20D FC/MC/PC48D 1.00 1.00 1.01
MV20D UC48D 1.00 1.00 1.01
MV12D FC/MC62D 1.00 1.00 1.00
MV20D FC/MC62D 1.01 1.01 1.01
T.C. S.C. KW
Variable Speed
Furnace
(F,L)C8V*A12 FC/MC/PC37A 0.99 0.99 1.03
(F,L)C9V*A12 FC/MC/PC37A 1.00 0.99 1.04
(F,L)C8V*B16 FC/MC/PC43B 0.99 0.99 1.02
(F,L)C8V*B16 FC/MC/PC43C 0.99 0.99 1.02
(F,L)C8V*C16 FC/MC/PC43C 0.96 0.96 1.00
(F,L)C8V*C20 FC/MC/PC43C 1.00 1.00 1.02
(F,L)C9(C,V)*B12 FC/MC/PC43B 1.00 0.99 1.03
(F,L)C9(C,V)*B12 FC/MC/PC43C 1.00 0.99 1.03
(F,L)C9(C,V)*C16 FC/MC/PC43C 1.00 1.00 1.01
(F,L)C9(C,V)*C20 FC/MC/PC43C 1.00 1.00 1.03
(F,L)C8V*C16 FC/MC/PC48C 0.96 0.96 0.98
(F,L)C8V*C16 FC/MC/PC48D 0.96 0.96 0.98
(F,L)C8V*C16 UC48D 0.96 0.96 0.98
(F,L)C8V*C20 FC/MC/PC48C 1.01 1.01 1.00
(F,L)C8V*C20 FC/MC/PC48D 1.01 1.01 1.00
(F,L)C8V*C20 UC48D 1.01 1.01 1.00
(F,L)C9(C,V)*C16 FC/MC/PC48C 1.01 1.01 0.99
(F,L)C9(C,V)*C16 FC/MC/PC48D 1.01 1.01 0.99
(F,L)C9(C,V)*C16 UC48D 1.01 1.01 0.99
(F,L)C9(C,V)*C20 FC/MC/PC48C 1.01 1.01 1.02
Continued on Page 18.
Coil
T.C. S.C. KW
Johnson Controls Unitary Products 17
350155-CTG-C-0808
Variable Speed
Furnace
(F,L)C9(C,V)*C20 FC/MC/PC48D 1.01 1.01 1.02
(F,L)C9(C,V)*C20 UC48D 1.01 1.01 1.02
(F,L)C9(C,V)*D20 FC/MC/PC48D 1.01 1.01 1.01
(F,L)C9(C,V)*D20 UC48D 1.01 1.01 1.01
(F,L)C8V*C20 FC/MC62D 1.01 1.01 1.01
(F,L)C9(C,V)*C20 FC/MC62D 1.01 1.01 1.02
(F,L)C9(C,V)*D20 FC/MC62D 1.01 1.01 1.02
(F,L)C8V*C16 HC42C 0.96 0.96 0.99
(F,L)C8V*C20 HC42C 1.00 1.00 1.01
(F,L)C9(C,V)*C16 HC42C 1.00 0.99 1.01
(F,L)C9(C,V)*C20 HC42C 1.00 1.00 1.03
C*(8,L)C*B12 FC/MC/PC35B 0.96 0.93 1.03
C*9C*B12 FC/MC/PC35B 0.98 0.97 1.05
C*(8,L)C*C16 FC/MC/PC35C 0.98 0.97 1.03
C*(8,L)C*C20 FC/MC/PC35C 1.01 1.07 1.07
C*9C*C16 FC/MC/PC35C 0.98 0.98 1.03
C*9C*C20 FC/MC/PC35C 0.96 0.94 1.03
C*(8,L)C*A12 FC/MC/PC36A 0.97 0.96 1.05
C*(8,L)C*B12 FC/MC/PC36B 0.96 0.93 1.02
C*9C*B12 FC/MC/PC36B 0.97 0.97 1.04
C*(8,L)C*C16 FC/MC/PC36C 0.98 0.97 1.02
C*(8,L)C*C20 FC/MC/PC36C 0.98 0.97 1.02
C*9C*C16 FC/MC/PC36C 0.99 1.02 1.05
C*9C*C20 FC/MC/PC36C 0.96 0.94 1.02
C*(8,L)C*A12 FC/MC/PC37A 0.95 0.89 1.02
C*(8,L)C*B12 FC/MC/PC42B 0.97 0.94 1.02
C*9C*B12 FC/MC/PC42B 0.98 0.98 1.04
C*(8,L)C*C16 FC/MC/PC42C 0.98 0.98 1.02
C*(8,L)C*C20 FC/MC/PC42C 0.97 0.95 1.01
C*9C*C16 FC/MC/PC42C 0.97 0.94 1.02
C*9C*C20 FC/MC/PC42C 0.97 0.95 1.02
C*(8,L)C*B12 FC/MC/PC43B 0.97 0.94 1.03
C*9C*B12 FC/MC/PC43B 0.98 0.98 1.04
C*(8,L)C*C16 FC/MC/PC43C 0.99 0.98 1.03
C*(8,L)C*C20 FC/MC/PC43C 0.97 0.95 1.01
C*9C*C16 FC/MC/PC43C 0.98 0.98 1.04
C*9C*C20 FC/MC/PC43C 0.97 0.94 1.02
C*(8,L)C*C16 FC/MC/PC48C 1.00 1.00 1.02
C*(8,L)C*C20 FC/MC/PC48C 0.97 0.94 1.01
C*9C*C16 FC/MC/PC48C 1.00 1.00 1.03
C*9C*C20 FC/MC/PC48C 0.97 0.95 1.02
C*(8,L)C*C16 HC42 0.98 0.98 1.03
C*(8,L)C*C20 HC42 0.97 0.95 1.01
C*9C*C16 HC42 0.98 0.98 1.04
C*9C*C20 HC42 0.98 0.98 1.02
C*(8,L)C*B12 HD48 0.97 0.95 1.02
C*(8,L)C*C16 HD48 0.99 0.99 1.02
C*(8,L)C*C20 HD48 0.97 0.93 1.01
C*9C*B12 HD48 0.96 0.92 1.02
C*9C*C16 HD48 0.99 0.98 1.02
C*9C*C20 HD48 0.97 0.94 1.02
Coil
T.C. S.C. KW
Variable Speed
Furnace
C*(8,L)C*A12 UC36A 0.95 0.95 1.05
C*(8,L)C*B12 UC36B 0.94 0.91 1.02
C*9C*B12 UC36B 0.96 0.95 1.04
C*(8,L)C*C16 UC36C 0.96 0.95 1.02
C*(8,L)C*C20 UC36C 0.96 0.95 1.02
C*9C*C16 UC36C 0.98 1.00 1.05
C*9C*C20 UC36C 0.95 0.92 1.02
C*(8,L)C*B12 UC42B 0.96 0.94 1.02
C*9C*B12 UC42B 0.97 0.96 1.04
C*(8,L)C*C16 UC42C 0.97 0.97 1.02
C*(8,L)C*C20 UC42C 0.96 0.94 1.01
C*9C*C16 UC42C 0.96 0.93 1.02
C*9C*C20 UC42C 0.96 0.94 1.02
C*(8,L)C*C16 UC48C 0.98 0.99 1.02
C*(8,L)C*C20 UC48C 0.95 0.93 1.01
C*9C*C16 UC48C 0.98 0.99 1.03
C*9C*C20 UC48C 0.97 0.95 1.03
G*9V*B12 FC/MC/PC35B 0.98 0.97 1.05
G*9V*C16 FC/MC/PC35C 0.98 0.98 1.03
G*9V*C20 FC/MC/PC35C 0.96 0.94 1.03
G*9V*A12 FC/MC/PC36A 0.96 0.94 1.05
G*9V*B12 FC/MC/PC36B 0.97 0.97 1.04
G*9V*C16 FC/MC/PC36C 0.99 1.02 1.05
G*9V*C20 FC/MC/PC36C 0.96 0.94 1.02
G*9V*A12 FC/MC/PC37A 0.98 0.97 1.06
G*9V*B12 FC/MC/PC42B 0.98 0.98 1.04
G*9V*C16 FC/MC/PC42C 0.97 0.94 1.02
G*9V*C20 FC/MC/PC42C 0.97 0.95 1.02
G*9V*B12 FC/MC/PC43B 0.98 0.98 1.04
G*9V*C16 FC/MC/PC43C 0.98 0.98 1.04
G*9V*C20 FC/MC/PC43C 0.97 0.94 1.02
G*9V*C16 FC/MC/PC48C 1.00 1.00 1.03
G*9V*C20 FC/MC/PC48C 0.97 0.95 1.02
G*9V*C16 HC42 0.98 0.98 1.04
G*9V*C20 HC42 0.98 0.98 1.02
G*9V*B12 HD48 0.96 0.92 1.02
G*9V*C16 HD48 0.99 0.98 1.02
G*9V*C20 HD48 0.97 0.94 1.02
G*9V*A12 UC36A 0.94 0.92 1.05
G*9V*B12 UC36B 0.96 0.95 1.04
G*9V*C16 UC36C 0.98 1.00 1.05
G*9V*C20 UC36C 0.95 0.92 1.02
G*9V*B12 UC42B 0.97 0.96 1.04
G*9V*C16 UC42C 0.96 0.93 1.02
G*9V*C20 UC42C 0.96 0.94 1.02
G*9V*C16 UC48C 0.98 0.99 1.03
G*9V*C20 UC48C 0.97 0.95 1.03
Coil
T.C. S.C. KW
18 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B036F1
INDOOR COIL MODEL NO. FC62D + MV12D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 1100 1200 1300
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 35.7 38.1 38.5 41.2 45.8 37.2 39.1 38.8 41.7 46.1 38.6 40.1 39.1 42.1 46.3
S.C. 34.5 31.9 27.3 26.9 21.2 36.1 33.4 28.6 27.7 22.1 37.5 35.0 29.9 28.4 22.9
K.W. 1.71 1.74 1.74 1.79 1.82 1.74 1.76 1.76 1.81 1.84 1.78 1.79 1.78 1.84 1.86
T.C. 34.6 36.5 36.7 39.5 43.6 35.9 37.4 37.1 40.0 43.9 37.1 38.2 37.5 40.4 44.2
S.C. 33.6 31.1 26.5 26.0 20.6 34.8 32.6 27.6 27.0 21.4 36.0 34.1 28.8 27.9 22.1
K.W. 1.98 2.00 2.00 2.05 2.07 2.00 2.02 2.01 2.06 2.09 2.04 2.05 2.04 2.09 2.12
T.C. 33.6 35.0 35.0 37.8 41.5 34.6 35.7 35.4 38.3 41.8 35.5 36.4 35.9 38.7 42.0
S.C. 32.6 30.3 25.6 25.2 20.0 33.6 31.8 26.6 26.3 20.6 34.5 33.3 27.7 27.4 21.2
K.W. 2.24 2.26 2.25 2.30 2.33 2.26 2.28 2.27 2.32 2.35 2.30 2.30 2.30 2.34 2.38
T.C. 32.5 33.4 33.2 36.1 39.4 33.3 34.0 33.7 36.6 39.6 34.0 34.5 34.2 37.1 39.8
S.C. 31.6 29.4 24.7 24.3 19.4 32.3 31.0 25.6 25.6 19.9 33.0 32.4 26.6 26.9 20.3
K.W. 2.50 2.52 2.51 2.55 2.59 2.52 2.53 2.53 2.57 2.60 2.56 2.56 2.56 2.59 2.63
T.C. 30.7 31.5 31.2 33.7 37.0 31.5 32.0 31.6 34.2 37.2 32.1 32.6 32.0 34.7 37.4
S.C. 29.9 28.4 23.7 23.6 18.6 30.6 29.6 24.7 24.8 19.0 31.3 30.6 25.7 25.9 19.4
K.W. 2.89 2.90 2.90 2.94 2.97 2.92 2.92 2.91 2.96 2.99 2.95 2.95 2.94 2.98 3.02
T.C. 29.0 29.6 29.2 31.3 34.7 29.7 30.2 29.5 31.8 34.9 30.4 30.7 29.8 32.3 35.0
S.C. 28.3 27.5 22.8 22.9 17.9 29.0 28.2 23.8 23.9 18.2 29.6 28.9 24.8 24.9 18.5
K.W. 3.28 3.28 3.27 3.32 3.35 3.30 3.29 3.29 3.33 3.37 3.33 3.32 3.31 3.35 3.40
T.C. 27.3 27.7 27.2 29.0 32.4 28.0 28.3 27.4 29.5 32.6 28.6 28.8 27.7 30.0 32.7
S.C. 26.7 26.5 21.9 22.2 17.2 27.3 26.8 22.9 23.1 17.4 28.0 27.1 24.0 24.0 17.6
K.W. 3.66 3.65 3.65 3.70 3.73 3.68 3.67 3.66 3.71 3.75 3.71 3.70 3.69 3.73 3.78
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
HIGH CFM
Air Handler Coil
AV36C – 0.97 0.97 1.03
MV12B FC/MC/PC43B 0.98 0.98 1.03
MV12B FC/MC/PC43C 0.98 0.98 1.03
MV16C FC/MC/PC43C 0.99 0.99 1.01
MV12D FC/MC/PC48D 0.98 0.98 1.00
MV12D UC48D 0.98 0.98 1.00
MV16C FC/MC/PC48C 0.99 0.99 1.00
MV16C FC/MC/PC48D 0.99 0.99 1.00
MV16C UC48D 0.99 0.99 1.00
MV20D FC/MC/PC48D 1.00 1.00 1.00
MV20D UC48D 1.00 1.00 1.00
MV12D FC/MC62D 1.00 1.00 1.00
MV20D FC/MC62D 1.01 1.01 1.00
T.C. S.C. KW
Variable Speed
Furnace
(F,L)C8V*A12 FC/MC/PC37A 0.98 0.98 1.05
(F,L)C9V*A12 FC/MC/PC37A 0.97 0.97 1.07
(F,L)C8V*B16 FC/MC/PC43B 0.98 0.98 1.02
(F,L)C8V*B16 FC/MC/PC43C 0.98 0.98 1.02
(F,L)C8V*C16 FC/MC/PC43C 0.99 0.99 1.02
(F,L)C8V*C20 FC/MC/PC43C 0.98 0.98 1.04
(F,L)C9(C,V)*B12 FC/MC/PC43B 0.97 0.97 1.05
(F,L)C9(C,V)*B12 FC/MC/PC43C 0.97 0.97 1.05
(F,L)C9(C,V)*C16 FC/MC/PC43C 0.98 0.98 1.02
(F,L)C9(C,V)*C20 FC/MC/PC43C 0.98 0.98 1.03
(F,L)C8V*C16 FC/MC/PC48C 0.99 0.99 1.01
(F,L)C8V*C16 FC/MC/PC48D 0.99 0.99 1.01
(F,L)C8V*C16 UC48D 0.99 0.99 1.01
(F,L)C8V*C20 FC/MC/PC48C 0.99 0.99 1.04
(F,L)C8V*C20 FC/MC/PC48D 0.99 0.99 1.04
(F,L)C8V*C20 UC48D 0.99 0.99 1.04
(F,L)C9(C,V)*C16 FC/MC/PC48C 0.99 0.99 1.02
(F,L)C9(C,V)*C16 FC/MC/PC48D 0.99 0.99 1.02
(F,L)C9(C,V)*C16 UC48D 0.99 0.99 1.02
(F,L)C9(C,V)*C20 FC/MC/PC48C 0.99 0.99 1.03
Continued on Page 20.
Coil
T.C. S.C. KW
Johnson Controls Unitary Products 19
350155-CTG-C-0808
Variable Speed
Furnace
(F,L)C9(C,V)*C20 FC/MC/PC48D 0.99 0.99 1.03
(F,L)C9(C,V)*C20 UC48D 0.99 0.99 1.03
(F,L)C9(C,V)*D20 FC/MC/PC48D 0.99 0.99 1.02
(F,L)C9(C,V)*D20 UC48D 0.99 0.99 1.02
(F,L)C8V*C20 FC/MC62D 1.00 1.00 1.04
(F,L)C9(C,V)*C20 FC/MC62D 1.00 1.00 1.03
(F,L)C9(C,V)*D20 FC/MC62D 1.01 1.00 1.02
(F,L)C8V*C16 HC42C 0.99 0.99 1.02
(F,L)C8V*C20 HC42C 0.98 0.98 1.04
(F,L)C9(C,V)*C16 HC42C 0.98 0.98 1.02
(F,L)C9(C,V)*C20 HC42C 0.98 0.98 1.03
C*(8,L)C*B12 FC/MC/PC35B 0.97 0.96 1.07
C*9C*B12 FC/MC/PC35B 0.97 0.97 1.07
C*(8,L)C*C16 FC/MC/PC35C 0.98 0.97 1.04
C*(8,L)C*C20 FC/MC/PC35C 0.97 0.96 1.02
C*9C*C16 FC/MC/PC35C 0.98 0.97 1.04
C*9C*C20 FC/MC/PC35C 0.98 1.00 1.07
C*(8,L)C*A12 FC/MC/PC36A 0.95 0.94 1.07
C*(8,L)C*B12 FC/MC/PC36B 0.96 0.96 1.05
C*9C*B12 FC/MC/PC36B 0.96 0.94 1.05
C*(8,L)C*C16 FC/MC/PC36C 0.96 0.95 1.03
C*(8,L)C*C20 FC/MC/PC36C 0.96 0.95 1.02
C*9C*C16 FC/MC/PC36C 0.96 0.95 1.03
C*9C*C20 FC/MC/PC36C 0.97 0.99 1.06
C*(8,L)C*A12 FC/MC/PC37A 0.95 0.90 1.03
C*(8,L)C*B12 FC/MC/PC42B 0.96 0.95 1.03
C*9C*B12 FC/MC/PC42B 0.96 0.96 1.07
C*(8,L)C*C16 FC/MC/PC42C 0.98 0.98 1.01
C*(8,L)C*C20 FC/MC/PC42C 0.97 0.96 1.00
C*9C*C16 FC/MC/PC42C 0.96 0.96 1.03
C*9C*C20 FC/MC/PC42C 0.98 1.01 1.05
C*(8,L)C*B12 FC/MC/PC43B 0.98 0.98 1.07
C*9C*B12 FC/MC/PC43B 0.98 0.98 1.07
C*(8,L)C*C16 FC/MC/PC43C 0.98 0.99 1.03
C*(8,L)C*C20 FC/MC/PC43C 0.98 0.99 1.02
C*9C*C16 FC/MC/PC43C 0.98 0.99 1.06
C*9C*C20 FC/MC/PC43C 0.98 0.99 1.03
C*(8,L)C*C16 FC/MC/PC48C 0.98 0.99 1.02
C*(8,L)C*C20 FC/MC/PC48C 0.98 0.98 1.01
C*9C*C16 FC/MC/PC48C 0.98 0.99 1.04
C*9C*C20 FC/MC/PC48C 0.98 1.02 1.06
C*(8,L)C*C16 HC42 0.98 0.98 1.03
C*(8,L)C*C20 HC42 0.98 0.98 1.02
C*9C*C16 HC42 0.98 0.98 1.06
C*9C*C20 HC42 0.98 0.98 1.04
C*(8,L)C*B12 HD48 0.98 0.98 1.05
C*(8,L)C*C16 HD48 0.98 0.98 1.02
C*(8,L)C*C20 HD48 0.98 0.97 1.01
C*9C*B12 HD48 0.98 0.96 1.06
C*9C*C16 HD48 0.98 0.98 1.03
Coil
T.C. S.C. KW
Variable Speed
Furnace
C*9C*C20 HD48 0.98 1.01 1.06
C*(8,L)C*A12 UC36A 0.94 0.92 1.07
C*(8,L)C*B12 UC36B 0.95 0.94 1.05
C*9C*B12 UC36B 0.95 0.93 1.04
C*(8,L)C*C16 UC36C 0.95 0.93 1.03
C*(8,L)C*C20 UC36C 0.95 0.93 1.02
C*9C*C16 UC36C 0.95 0.93 1.03
C*9C*C20 UC36C 0.96 0.98 1.06
C*(8,L)C*B12 UC42B 0.96 0.95 1.03
C*9C*B12 UC42B 0.95 0.95 1.07
C*(8,L)C*C16 UC42C 0.97 0.96 1.01
C*(8,L)C*C20 UC42C 0.97 0.95 1.00
C*9C*C16 UC42C 0.96 0.95 1.03
C*9C*C20 UC42C 0.98 0.99 1.05
C*(8,L)C*C16 UC48C 0.98 0.99 1.02
C*(8,L)C*C20 UC48C 0.98 0.98 1.01
C*9C*C16 UC48C 0.98 0.99 1.03
C*9C*C20 UC48C 0.98 1.02 1.06
G*9V*B12 FC/MC/PC35B 0.97 0.97 1.07
G*9V*C16 FC/MC/PC35C 0.98 0.97 1.04
G*9V*C20 FC/MC/PC35C 0.98 1.00 1.07
G*9V*A12 FC/MC/PC36A 0.95 0.94 1.08
G*9V*B12 FC/MC/PC36B 0.96 0.94 1.05
G*9V*C16 FC/MC/PC36C 0.96 0.95 1.03
G*9V*C20 FC/MC/PC36C 0.97 0.99 1.06
G*9V*A12 FC/MC/PC37A 0.96 0.94 1.06
G*9V*B12 FC/MC/PC42B 0.96 0.96 1.07
G*9V*C16 FC/MC/PC42C 0.96 0.96 1.03
G*9V*C20 FC/MC/PC42C 0.98 1.01 1.05
G*9V*B12 FC/MC/PC43B 0.98 0.98 1.07
G*9V*C16 FC/MC/PC43C 0.98 0.99 1.06
G*9V*C20 FC/MC/PC43C 0.98 0.99 1.03
G*9V*C16 FC/MC/PC48C 0.98 0.99 1.04
G*9V*C20 FC/MC/PC48C 0.98 1.02 1.06
G*9V*C16 HC42 0.98 0.98 1.06
G*9V*C20 HC42 0.98 0.98 1.04
G*9V*B12 HD48 0.98 0.96 1.06
G*9V*C16 HD48 0.98 0.98 1.03
G*9V*C20 HD48 0.98 1.01 1.06
G*9V*A12 UC36A 0.94 0.93 1.07
G*9V*B12 UC36B 0.95 0.93 1.04
G*9V*C16 UC36C 0.95 0.93 1.03
G*9V*C20 UC36C 0.96 0.98 1.06
G*9V*B12 UC42B 0.95 0.95 1.07
G*9V*C16 UC42C 0.96 0.95 1.03
G*9V*C20 UC42C 0.98 0.99 1.05
G*9V*C16 UC48C 0.98 0.99 1.03
G*9V*C20 UC48C 0.98 1.02 1.06
Coil
T.C. S.C. KW
20 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B048F1
INDOOR COIL MODEL NO. FC62D + MV20D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 950 1000 1050
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 35.4 36.6 36.2 39.8 42.3 36.1 37.2 36.8 40.2 42.9 36.8 37.8 37.4 40.6 43.4
S.C. 34.3 31.8 26.9 27.2 21.7 34.8 32.5 27.6 27.8 22.0 35.3 33.3 28.2 28.5 22.3
K.W. 1.50 1.50 1.49 1.48 1.48 1.50 1.49 1.49 1.48 1.47 1.49 1.49 1.49 1.47 1.47
T.C. 34.0 34.9 34.5 37.8 40.4 34.6 35.4 35.0 38.2 40.9 35.2 36.0 35.5 38.6 41.5
S.C. 32.9 31.0 26.2 26.4 21.0 33.4 31.7 26.8 27.0 21.3 33.9 32.4 27.4 27.6 21.7
K.W. 1.81 1.81 1.81 1.80 1.79 1.81 1.81 1.80 1.79 1.78 1.80 1.80 1.80 1.79 1.78
T.C. 32.5 33.1 32.8 35.7 38.5 33.1 33.7 33.2 36.2 39.0 33.7 34.2 33.6 36.6 39.5
S.C. 31.5 30.2 25.5 25.5 20.3 32.0 30.9 26.0 26.1 20.7 32.5 31.6 26.6 26.7 21.1
K.W. 2.12 2.12 2.12 2.11 2.10 2.12 2.12 2.12 2.11 2.10 2.12 2.12 2.11 2.11 2.09
T.C. 31.1 31.4 31.1 33.7 36.6 31.7 31.9 31.4 34.2 37.1 32.2 32.4 31.7 34.6 37.6
S.C. 30.1 29.4 24.8 24.7 19.6 30.6 30.1 25.3 25.3 20.0 31.1 30.8 25.8 25.8 20.4
K.W. 2.44 2.44 2.44 2.43 2.41 2.43 2.43 2.43 2.43 2.41 2.43 2.43 2.43 2.42 2.40
T.C. 29.4 29.7 28.9 31.5 34.2 30.0 30.2 29.3 31.9 34.6 30.5 30.7 29.6 32.3 35.0
S.C. 28.5 27.8 23.8 23.8 18.7 28.9 28.5 24.3 24.4 19.1 29.4 29.1 24.8 24.9 19.6
K.W. 2.86 2.87 2.87 2.87 2.84 2.86 2.86 2.86 2.86 2.84 2.86 2.86 2.86 2.85 2.84
T.C. 27.8 28.0 26.9 29.3 31.9 28.4 28.6 27.2 29.7 32.2 28.9 29.1 27.6 30.1 32.5
S.C. 26.9 26.3 22.9 23.0 17.8 27.4 26.9 23.4 23.5 18.3 27.8 27.5 23.9 24.1 18.7
K.W. 3.28 3.28 3.29 3.29 3.26 3.27 3.28 3.28 3.27 3.26 3.27 3.27 3.28 3.27 3.26
T.C. 26.2 26.4 24.8 27.1 29.6 26.7 26.9 25.2 27.5 29.8 27.2 27.5 25.6 27.9 30.0
S.C. 25.4 24.8 21.9 22.1 16.9 25.8 25.4 22.4 22.7 17.4 26.2 26.0 22.9 23.3 17.9
K.W. 3.69 3.70 3.71 3.71 3.67 3.69 3.69 3.70 3.69 3.67 3.69 3.69 3.70 3.68 3.68
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Air Handler Coil
AV/SV48D – 0.97 0.97 1.00
AV/SV60D – 0.97 0.97 1.00
F4FV060 – 0.99 0.98 1.01
MV16C FC/MC/PC48C 1.00 1.00 0.99
MV16C FC/MC/PC48D 1.00 1.00 0.99
MV16C UC48D 1.00 1.00 0.99
MV20D FC/MC/PC48D 1.00 1.00 1.00
MV20D UC48D 1.00 1.00 1.00
MV20D FC/MC62D 1.00 1.00 1.00
Continued on Page 22.
T.C. S.C. KW
Johnson Controls Unitary Products 21
350155-CTG-C-0808
Variable Speed
Furnace
(F,L)C8V*C16 FC/MC/PC48C 0.97 0.97 0.98
(F,L)C8V*C16 FC/MC/PC48D 0.97 0.97 0.98
(F,L)C8V*C16 UC48D 0.97 0.97 0.98
(F,L)C8V*C20 FC/MC/PC48C 1.00 1.00 0.99
(F,L)C8V*C20 FC/MC/PC48D 1.00 1.00 0.99
(F,L)C8V*C20 UC48D 1.00 1.00 0.99
(F,L)C9(C,V)*C16 FC/MC/PC48C 1.01 1.02 0.98
(F,L)C9(C,V)*C16 FC/MC/PC48D 1.01 1.02 0.98
(F,L)C9(C,V)*C16 UC48D 1.01 1.02 0.98
(F,L)C9(C,V)*C20 FC/MC/PC48C 0.99 0.99 1.00
(F,L)C9(C,V)*C20 FC/MC/PC48D 0.99 0.99 1.00
(F,L)C9(C,V)*C20 UC48D 0.99 0.99 1.00
(F,L)C9(C,V)*D20 FC/MC/PC48D 0.99 0.99 1.00
(F,L)C9(C,V)*D20 UC48D 0.99 0.99 1.00
(F,L)C8V*C20 FC/MC62D 1.00 1.00 0.99
(F,L)C9(C,V)*C20 FC/MC62D 1.00 1.00 1.00
(F,L)C9(C,V)*D20 FC/MC62D 0.99 0.99 1.00
(F,L)C9(C,V)*D20 HC60D 0.95 0.95 1.00
C*(8,L)C*C16 FC/MC/PC48C 1.00 0.99 1.02
C*(8,L)C*C20 FC/MC/PC48C 1.00 0.99 1.02
C*9C*C16 FC/MC/PC48C 1.00 1.00 1.02
C*9C*C20 FC/MC/PC48C 1.00 1.00 1.02
C*9C*D20 FC/MC/PC48D 0.99 0.98 1.02
C*9C*D20 FC/MC/PC60D 0.97 0.96 1.02
C*9C*D20 FC/MC62D 0.99 0.99 1.02
C*(8,L)C*C16 FC/PC60C 0.98 0.97 1.01
C*(8,L)C*C20 FC/PC60C 0.98 0.97 1.01
C*9C*C16 FC/PC60C 0.97 0.96 1.02
C*9C*C20 FC/PC60C 0.98 0.97 1.02
C*9C*D20 HC60 0.96 0.96 1.03
C*(8,L)C*C16 HD48 0.98 0.97 1.02
C*(8,L)C*C20 HD48 0.98 0.97 1.02
C*9C*C16 HD48 0.99 0.97 1.02
C*9C*C20 HD48 0.99 0.97 1.02
C*9C*D20 HD48 0.98 0.97 1.02
Coil
T.C. S.C. KW
Variable Speed
Furnace
C*(8,L)C*C16 HD60 1.01 1.00 1.01
C*(8,L)C*C20 HD60 1.01 1.00 1.00
C*9C*C16 HD60 1.00 1.00 1.02
C*9C*C20 HD60 1.01 1.00 1.02
C*9C*D20 HD60 1.00 1.00 1.02
C*(8,L)C*C16 UC48C 0.95 0.95 1.02
C*(8,L)C*C20 UC48C 0.95 0.95 1.03
C*9C*C16 UC48C 0.95 0.96 1.03
C*9C*C20 UC48C 0.95 0.97 1.02
C*9C*D20 UC48D 0.89 0.90 1.03
C*(8,L)C*C16 UC60C 0.90 0.87 1.02
C*(8,L)C*C20 UC60C 0.90 0.87 1.01
C*9C*C16 UC60C 0.90 0.87 1.03
C*9C*C20 UC60C 0.90 0.87 1.03
C*9C*D20 UC60D 0.90 0.87 1.03
G*9V*C16 FC/MC/PC48C 1.00 1.00 1.02
G*9V*C20 FC/MC/PC48C 1.00 1.00 1.02
G*9V*D20 FC/MC/PC48D 0.99 0.98 1.02
G*9V*D20 FC/MC/PC60D 0.97 0.96 1.02
G*9V*D20 FC/MC62D 0.99 0.99 1.02
G*9V*C16 FC/PC60C 0.97 0.96 1.02
G*9V*C20 FC/PC60C 0.98 0.97 1.02
G*9V*D20 HC60 0.96 0.96 1.03
G*9V*C16 HD48 0.99 0.97 1.02
G*9V*C20 HD48 0.99 0.97 1.02
G*9V*D20 HD48 0.98 0.97 1.02
G*9V*C16 HD60 1.00 1.00 1.02
G*9V*C20 HD60 1.01 1.00 1.02
G*9V*D20 HD60 1.00 1.00 1.02
G*9V*C16 UC48C 0.95 0.96 1.03
G*9V*C20 UC48C 0.95 0.97 1.02
G*9V*D20 UC48D 0.89 0.90 1.03
G*9V*C16 UC60C 0.90 0.87 1.03
G*9V*C20 UC60C 0.90 0.87 1.03
G*9V*D20 UC60D 0.90 0.87 1.03
Coil
T.C. S.C. KW
22 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B048F1
INDOOR COIL MODEL NO. FC62D + MV20D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 1500 1600 1700
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 48.7 49.9 49.0 53.2 56.4 49.6 50.4 49.5 54.4 56.8 50.5 50.9 50.0 55.5 57.2
S.C. 48.0 44.9 38.2 37.9 29.7 48.9 46.3 39.1 39.0 30.3 49.7 47.6 40.0 40.1 30.9
K.W. 2.53 2.57 2.56 2.64 2.71 2.58 2.61 2.61 2.67 2.75 2.64 2.67 2.66 2.72 2.79
T.C. 46.8 47.7 46.8 50.9 53.6 47.6 48.2 47.2 51.8 54.0 48.3 48.8 47.6 52.5 54.4
S.C. 46.2 43.8 37.1 36.8 28.7 46.9 45.0 38.0 37.9 29.3 47.6 46.2 38.9 38.9 29.9
K.W. 2.89 2.91 2.90 2.98 3.05 2.93 2.96 2.95 3.02 3.09 2.99 3.01 3.00 3.07 3.15
T.C. 45.0 45.5 44.5 48.6 50.9 45.6 46.1 44.9 49.1 51.3 46.2 46.6 45.2 49.6 51.6
S.C. 44.3 42.6 35.9 35.7 27.8 44.9 43.7 36.9 36.7 28.4 45.6 44.8 37.8 37.7 28.9
K.W. 3.24 3.26 3.25 3.33 3.40 3.29 3.31 3.29 3.37 3.44 3.34 3.36 3.34 3.42 3.50
T.C. 43.1 43.4 42.2 46.3 48.2 43.5 43.9 42.5 46.5 48.5 44.0 44.4 42.9 46.6 48.8
S.C. 42.4 41.5 34.8 34.6 26.9 43.0 42.4 35.7 35.6 27.4 43.5 43.3 36.7 36.5 27.9
K.W. 3.59 3.61 3.60 3.68 3.75 3.64 3.66 3.64 3.72 3.79 3.69 3.71 3.69 3.77 3.85
T.C. 40.7 41.0 39.6 43.5 45.2 41.2 41.5 39.9 43.7 45.4 41.6 41.9 40.1 43.9 45.6
S.C. 40.1 39.3 33.5 33.5 25.8 40.6 40.1 34.4 34.4 26.3 41.1 40.8 35.4 35.3 26.8
K.W. 4.10 4.12 4.10 4.18 4.25 4.15 4.16 4.14 4.22 4.29 4.21 4.22 4.19 4.27 4.35
T.C. 38.5 38.7 37.2 40.7 42.4 38.9 39.1 37.3 40.9 42.5 39.3 39.5 37.4 41.2 42.5
S.C. 37.9 37.2 32.3 32.4 24.9 38.4 37.8 33.2 33.3 25.3 38.8 38.4 34.1 34.2 25.7
K.W. 4.60 4.60 4.58 4.67 4.74 4.65 4.65 4.62 4.71 4.78 4.70 4.71 4.67 4.76 4.83
T.C. 36.2 36.4 34.7 37.9 39.6 36.6 36.8 34.7 38.2 39.6 36.9 37.1 34.7 38.4 39.5
S.C. 35.7 35.1 31.1 31.3 23.9 36.1 35.6 32.0 32.2 24.3 36.5 36.0 32.8 33.1 24.6
K.W. 5.09 5.09 5.07 5.16 5.23 5.14 5.14 5.11 5.20 5.27 5.20 5.21 5.16 5.25 5.32
Multipliers for determining the performance with other indoor sections
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
HIGH CFM
Air Handler Coil
AV/SV48D – 0.96 0.96 0.99
AV/SV60D – 0.96 0.96 0.99
F4FV060 – 0.96 0.96 0.98
MV16C FC/MC/PC48C 0.99 0.99 0.99
MV16C FC/MC/PC48D 0.99 0.99 0.99
MV16C UC48D 0.99 0.99 0.99
MV20D FC/MC/PC48D 0.99 0.99 1.00
MV20D UC48D 0.99 0.99 1.00
MV20D FC/MC62D 1.00 1.00 1.00
Continued on Page 24.
T.C. S.C. KW
Johnson Controls Unitary Products 23
350155-CTG-C-0808
Variable Speed
Furnace
(F,L)C8V*C16 FC/MC/PC48C 0.97 0.97 1.01
(F,L)C8V*C16 FC/MC/PC48D 0.97 0.97 1.01
(F,L)C8V*C16 UC48D 0.97 0.97 1.01
(F,L)C8V*C20 FC/MC/PC48C 0.98 0.98 1.02
(F,L)C8V*C20 FC/MC/PC48D 0.98 0.98 1.02
(F,L)C8V*C20 UC48D 0.98 0.98 1.02
(F,L)C9(C,V)*C16 FC/MC/PC48C 0.98 0.98 1.03
(F,L)C9(C,V)*C16 FC/MC/PC48D 0.98 0.98 1.03
(F,L)C9(C,V)*C16 UC48D 0.98 0.98 1.03
(F,L)C9(C,V)*C20 FC/MC/PC48C 0.98 0.98 1.02
(F,L)C9(C,V)*C20 FC/MC/PC48D 0.98 0.98 1.02
(F,L)C9(C,V)*C20 UC48D 0.98 0.98 1.02
(F,L)C9(C,V)*D20 FC/MC/PC48D 0.98 0.98 1.00
(F,L)C9(C,V)*D20 UC48D 0.98 0.98 1.00
(F,L)C8V*C20 FC/MC62D 0.99 0.99 1.01
(F,L)C9(C,V)*C20 FC/MC62D 0.99 0.99 1.02
(F,L)C9(C,V)*D20 FC/MC62D 0.99 0.99 1.01
(F,L)C9(C,V)*D20 HC60D 0.95 0.95 1.00
C*(8,L)C*C16 FC/MC/PC48C 1.00 1.00 1.04
C*(8,L)C*C20 FC/MC/PC48C 1.00 1.00 1.04
C*9C*C16 FC/MC/PC48C 1.00 0.99 1.04
C*9C*C20 FC/MC/PC48C 1.00 0.99 1.04
C*9C*D20 FC/MC/PC48D 0.99 0.98 1.04
C*9C*D20 FC/MC/PC60D 0.98 0.98 1.03
C*9C*D20 FC/MC62D 0.99 0.98 1.03
C*(8,L)C*C16 FC/PC60C 0.98 0.98 1.03
C*(8,L)C*C20 FC/PC60C 0.99 0.98 1.01
C*9C*C16 FC/PC60C 0.98 0.98 1.04
C*9C*C20 FC/PC60C 0.98 0.98 1.04
C*9C*D20 HC60 0.97 0.97 1.03
C*(8,L)C*C16 HD48 1.00 0.98 1.03
C*(8,L)C*C20 HD48 1.00 0.98 1.04
C*9C*C16 HD48 0.99 0.97 1.04
C*9C*C20 HD48 0.99 0.97 1.04
C*9C*D20 HD48 1.00 0.97 1.04
Coil
T.C. S.C. KW
Variable Speed
Furnace
C*(8,L)C*C16 HD60 1.00 1.00 1.03
C*(8,L)C*C20 HD60 1.00 1.01 1.01
C*9C*C16 HD60 1.00 1.00 1.04
C*9C*C20 HD60 1.00 1.00 1.04
C*9C*D20 HD60 1.00 1.00 1.04
C*(8,L)C*C16 UC48C 0.97 0.97 1.03
C*(8,L)C*C20 UC48C 0.96 0.96 1.03
C*9C*C16 UC48C 0.96 0.96 1.03
C*9C*C20 UC48C 0.96 0.96 1.04
C*9C*D20 UC48D 0.92 0.90 1.03
C*(8,L)C*C16 UC60C 0.93 0.90 1.02
C*(8,L)C*C20 UC60C 0.93 0.91 1.00
C*9C*C16 UC60C 0.92 0.90 1.03
C*9C*C20 UC60C 0.92 0.90 1.03
C*9C*D20 UC60D 0.93 0.90 1.02
G*9V*C16 FC/MC/PC48C 1.00 0.99 1.04
G*9V*C20 FC/MC/PC48C 1.00 0.99 1.04
G*9V*D20 FC/MC/PC48D 0.99 0.98 1.04
G*9V*D20 FC/MC/PC60D 0.98 0.98 1.03
G*9V*D20 FC/MC62D 0.99 0.98 1.03
G*9V*C16 FC/PC60C 0.98 0.98 1.04
G*9V*C20 FC/PC60C 0.98 0.98 1.04
G*9V*D20 HC60 0.97 0.97 1.03
G*9V*C16 HD48 0.99 0.97 1.04
G*9V*C20 HD48 0.99 0.97 1.04
G*9V*D20 HD48 1.00 0.97 1.04
G*9V*C16 HD60 1.00 1.00 1.04
G*9V*C20 HD60 1.00 1.00 1.04
G*9V*D20 HD60 1.00 1.00 1.04
G*9V*C16 UC48C 0.96 0.96 1.03
G*9V*C20 UC48C 0.96 0.96 1.04
G*9V*D20 UC48D 0.92 0.90 1.03
G*9V*C16 UC60C 0.92 0.90 1.03
G*9V*C20 UC60C 0.92 0.90 1.03
G*9V*D20 UC60D 0.93 0.90 1.02
Coil
T.C. S.C. KW
24 Johnson Controls Unitary Products
350155-CTG-C-0808
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B060F1
INDOOR COIL MODEL NO. FC62D + MV20D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 1100 1150 1200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 38.1 44.0 43.9 47.7 52.4 39.7 44.2 44.3 48.1 53.0 41.4 44.3 44.7 48.5 53.5
S.C. 37.2 35.7 30.6 30.0 24.5 38.8 36.5 31.2 30.6 24.9 40.4 37.3 31.7 31.2 25.3
K.W. 3.20 1.94 1.94 1.91 1.92 2.79 1.94 1.94 1.91 1.90 2.37 1.95 1.94 1.92 1.88
T.C. 37.5 42.0 42.0 45.7 50.2 39.2 42.4 42.3 46.1 50.8 40.8 42.8 42.7 46.5 51.3
S.C. 36.6 35.0 29.8 29.4 23.8 38.2 35.8 30.4 30.0 24.2 39.8 36.6 30.9 30.6 24.6
K.W. 3.20 2.36 2.36 2.33 2.34 2.78 2.36 2.36 2.34 2.32 2.37 2.37 2.36 2.35 2.31
T.C. 37.0 40.1 40.0 43.8 48.1 38.6 40.7 40.4 44.2 48.6 40.2 41.3 40.7 44.5 49.1
S.C. 36.1 34.2 29.0 28.7 23.1 37.7 35.0 29.6 29.3 23.5 39.2 35.8 30.1 29.9 23.8
K.W. 3.20 2.78 2.78 2.75 2.76 2.78 2.78 2.78 2.76 2.75 2.37 2.78 2.78 2.77 2.74
T.C. 36.5 38.2 38.1 41.9 45.9 38.1 39.0 38.4 42.2 46.4 39.7 39.8 38.7 42.5 46.9
S.C. 35.6 33.5 28.2 28.1 22.4 37.1 34.3 28.8 28.7 22.7 38.7 35.0 29.3 29.2 23.1
K.W. 3.20 3.19 3.20 3.17 3.17 2.78 3.20 3.20 3.18 3.17 2.37 3.20 3.20 3.19 3.17
T.C. 34.2 35.5 35.3 38.8 42.7 35.4 36.1 35.6 39.1 43.1 36.6 36.7 35.8 39.3 43.5
S.C. 33.4 31.9 26.7 26.8 21.0 34.6 32.6 27.3 27.3 21.4 35.7 33.2 27.8 27.8 21.8
K.W. 3.76 3.75 3.75 3.73 3.73 3.48 3.75 3.75 3.74 3.73 3.20 3.76 3.76 3.75 3.74
T.C. 32.0 32.9 32.6 35.8 39.7 32.8 33.3 32.9 36.0 39.9 33.5 33.7 33.1 36.3 40.2
S.C. 31.3 30.4 25.3 25.4 19.7 32.0 30.9 25.9 25.9 20.1 32.8 31.5 26.4 26.4 20.5
K.W. 4.30 4.29 4.29 4.28 4.28 4.16 4.29 4.29 4.28 4.28 4.02 4.29 4.29 4.29 4.28
T.C. 29.9 30.3 30.0 32.7 36.6 30.2 30.5 30.1 33.0 36.7 30.5 30.6 30.3 33.2 36.9
S.C. 29.2 28.9 23.9 24.1 18.3 29.5 29.3 24.4 24.5 18.8 29.8 29.7 24.9 24.9 19.3
K.W. 4.84 4.82 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83 4.83
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
LOW CFM
Air Handler Coil
AV/SV60D – 0.99 0.99 1.00
F4FV060 – 0.99 0.99 1.02
MV20D FC/MC/PC60D 0.95 0.95 1.00
MV20D UC60D 0.95 0.95 1.00
MV20D FC/MC62D 1.00 1.00 1.00
Variable Speed
Furnace
(F,L)C8V*C20 FC/PC60C 0.97 0.97 1.01
(F,L)C8V*C20 FC/MC/PC60D 0.97 0.97 1.01
(F,L)C8V*C20 UC60D 0.97 0.97 1.01
(F,L)C9(C,V)*C20 FC/PC60C 0.96 0.96 1.01
(F,L)C9(C,V)*C20 FC/MC/PC60D 0.96 0.96 1.01
(F,L)C9(C,V)*C20 UC60D 0.96 0.96 1.01
(F,L)C9(C,V)*D20 FC/MC/PC60D 0.95 0.95 1.00
(F,L)C9(C,V)*D20 UC60D 0.95 0.95 1.00
(F,L)C8V*C20 FC/MC62D 1.02 1.02 1.01
(F,L)C9(C,V)*C20 FC/MC62D 1.01 1.01 1.00
(F,L)C9(C,V)*D20 FC/MC62D 1.00 1.00 1.00
Coil
T.C. S.C. KW
T.C. S.C. KW
Variable Speed
Furnace
(F,L)C9(C,V)*D20 HC60D 0.95 0.95 1.00
C*9C*D20 FC/MC62D 0.98 0.97 1.03
C*(8,L)C*C20 FC/PC60C 0.97 0.95 1.01
C*9C*C20 FC/PC60C 0.97 0.95 1.02
C*9C*D20 HC60 0.95 0.94 1.02
C*(8,L)C*C20 HD60 0.98 0.95 1.01
C*9C*C20 HD60 0.98 0.97 1.03
C*9C*D20 HD60 0.99 0.97 1.03
C*(8,L)C*C20 UC60C 0.94 0.91 1.01
C*9C*C20 UC60C 0.93 0.90 1.02
C*9C*D20 UC60D 0.94 0.92 1.02
G*9V*D20 FC/MC62D 0.98 0.97 1.03
G*9V*C20 FC/PC60C 0.97 0.95 1.02
G*9V*D20 HC60 0.95 0.94 1.02
G*9V*C20 HD60 0.98 0.97 1.03
G*9V*D20 HD60 0.99 0.97 1.03
G*9V*C20 UC60C 0.93 0.90 1.02
G*9V*D20 UC60D 0.94 0.92 1.02
Coil
T.C. S.C. KW
Johnson Controls Unitary Products 25
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. AC8B060F1
INDOOR COIL MODEL NO. FC62D + MV20D
CONDENSER
ENTERING AIR
TEMPERATURE
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES ARE NET (KBTUH) WITH INDOOR FAN HEA T ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.
ID CFM 1750 1850 1950
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 57.1 61.0 60.6 66.2 71.1 58.0 61.4 61.2 66.8 72.2 58.8 61.6 61.8 67.3 73.3
S.C. 58.1 53.7 44.6 44.7 36.4 59.0 54.7 46.2 45.8 36.6 59.8 55.6 47.7 46.8 36.8
K.W. 3.20 3.25 3.26 3.32 3.36 3.27 3.32 3.31 3.39 3.44 3.36 3.40 3.38 3.47 3.53
T.C. 55.3 58.5 58.0 63.4 68.2 56.0 58.8 58.4 63.9 68.9 56.7 59.1 58.7 64.3 69.5
S.C. 56.3 52.5 43.9 43.6 34.8 57.0 53.5 44.9 44.6 34.9 57.7 54.5 45.8 45.6 34.9
K.W. 3.69 3.74 3.74 3.80 3.86 3.77 3.80 3.79 3.87 3.93 3.85 3.88 3.86 3.95 4.01
T.C. 53.6 55.9 55.4 60.6 65.3 54.1 56.2 55.5 60.9 65.5 54.6 56.5 55.6 61.2 65.8
S.C. 54.5 51.3 43.2 42.5 33.1 55.1 52.4 43.6 43.5 33.1 55.6 53.4 44.0 44.4 33.0
K.W. 4.19 4.23 4.22 4.29 4.35 4.26 4.29 4.28 4.35 4.41 4.34 4.36 4.35 4.43 4.49
T.C. 51.8 53.3 52.8 57.8 62.4 52.2 53.6 52.7 58.0 62.2 52.6 53.9 52.5 58.2 62.0
S.C. 52.7 50.1 42.5 41.5 31.5 53.1 51.3 42.4 42.3 31.4 53.5 52.4 42.1 43.2 31.2
K.W. 4.69 4.71 4.70 4.77 4.84 4.76 4.77 4.76 4.83 4.90 4.83 4.85 4.83 4.91 4.97
T.C. 48.6 49.8 49.3 53.9 58.3 49.1 50.1 49.3 54.1 58.2 49.5 50.4 49.2 54.2 58.1
S.C. 49.5 47.7 40.5 39.8 30.1 50.0 48.7 40.7 40.6 30.1 50.4 49.6 40.8 41.3 30.1
K.W. 5.39 5.40 5.38 5.46 5.54 5.46 5.47 5.44 5.53 5.60 5.54 5.55 5.52 5.60 5.67
T.C. 45.6 46.3 46.0 50.2 54.3 46.1 46.7 46.0 50.3 54.3 46.5 47.1 46.0 50.4 54.2
S.C. 46.4 45.4 38.6 38.2 28.7 46.9 46.2 39.0 38.9 29.0 47.4 46.9 39.4 39.6 29.1
K.W. 6.06 6.07 6.04 6.13 6.22 6.14 6.14 6.11 6.20 6.28 6.23 6.22 6.19 6.28 6.36
T.C. 42.6 42.8 42.6 46.4 50.3 43.1 43.3 42.7 46.5 50.4 43.5 43.7 42.7 46.5 50.4
S.C. 43.4 43.2 36.6 36.6 27.4 43.9 43.7 37.4 37.2 27.8 44.3 44.1 38.1 37.8 28.2
K.W. 6.74 6.75 6.71 6.80 6.89 6.82 6.82 6.78 6.87 6.96 6.91 6.90 6.86 6.96 7.04
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
NOTE: KW RATING IS FOR OUTDOOR AND INDOOR UNITS.
HIGH CFM
Air Handler Coil
AV/SV60D – 0.96 0.96 0.99
F4FV060 – 0.96 0.96 0.99
MV20D FC/MC/PC60D 0.96 0.96 0.99
MV20D UC60D 0.96 0.96 0.99
MV20D FC/MC62D 1.00 1.00 1.00
Variable Speed
Furnace
(F,L)C8V*C20 FC/PC60C 0.95 0.95 1.00
(F,L)C8V*C20 FC/MC/PC60D 0.95 0.95 1.00
(F,L)C8V*C20 UC60D 0.95 0.95 1.00
(F,L)C9(C,V)*C20 FC/PC60C 0.93 0.93 0.99
(F,L)C9(C,V)*C20 FC/MC/PC60D 0.93 0.93 0.99
(F,L)C9(C,V)*C20 UC60D 0.93 0.93 0.99
(F,L)C9(C,V)*D20 FC/MC/PC60D 0.93 0.93 0.98
(F,L)C9(C,V)*D20 UC60D 0.93 0.93 0.98
(F,L)C8V*C20 FC/MC62D 0.98 0.98 1.01
(F,L)C9(C,V)*C20 FC/MC62D 0.97 0.97 1.00
(F,L)C9(C,V)*D20 FC/MC62D 0.97 0.97 0.99
(F,L)C9(C,V)*D20 HC60D 0.94 0.94 0.98
Coil
T.C. S.C. KW
T.C. S.C. KW
Variable Speed
Furnace
C*9C*D20 FC/MC62D 0.97 0.94 1.02
C*(8,L)C*C20 FC/PC60C 0.96 0.93 1.00
C*9C*C20 FC/PC60C 0.96 0.93 1.02
C*9C*D20 HC60 0.94 0.90 1.01
C*(8,L)C*C20 HD60 0.97 0.93 1.00
C*9C*C20 HD60 0.97 0.94 1.03
C*9C*D20 HD60 0.96 0.92 1.02
C*(8,L)C*C20 UC60C 0.94 0.89 1.00
C*9C*C20 UC60C 0.93 0.89 1.02
C*9C*D20 UC60D 0.94 0.89 1.01
G*9V*D20 FC/MC62D 0.97 0.94 1.02
G*9V*C20 FC/PC60C 0.96 0.93 1.02
G*9V*D20 HC60 0.94 0.90 1.01
G*9V*C20 HD60 0.97 0.94 1.03
G*9V*D20 HD60 0.96 0.92 1.02
G*9V*C20 UC60C 0.93 0.89 1.02
G*9V*D20 UC60D 0.94 0.89 1.01
Coil
T.C. S.C. KW
Subject to change without notice. Printed in U.S.A. 350155-CTG-C-0808
Copyright © 2008 by Johnson Controls, Inc. All rights reserved. Supersedes: 350155-CTG-B-0408
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069
Loading...