Coleman 2300a512 Service Manual

SPRAY ADAPTER
Instructions for Use
Model 2300-512
Use the Spray Adapter with Hot Water on Demand
TM
for a refreshing hot shower. Easily attaches to faucet
with a quick connector.
Helpful Hints:
Hot Water on DemandTMon a table outside
the enclosure before using.
• It is typical to experience a slight change in water flow & temperature when moving spray adapter from high to low heights.
The Coleman Co., Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A.
1-800-835-3278 • TDD: 316-832-8707
©2003 The Coleman Company, Inc. All Rights reserved.
Coleman® is a registered trademark of The Coleman Company, Inc.
For information regarding other
Hot Water on DemandTMaccessories:
Visit us at
www.coleman.com
2300-051 (05/03)
Assembly Steps:
Make sure your Hot Water on DemandTMunit is turned off and that no water is running through the unit. Operate the unit from a camp table or picnic table. Do not set unit on the ground to use.
1. Attach Handled
Spray Head to Tubing End. Hand tighten.
2. Rotate Faucet
of the Hot
Water on Demand
TM
unit outward to its usage position.
3. Insert end of Spray Head Adapter into faucet.
4. Hold Spray Adapter in your hand.
5. Turn the Hot Water on DemandTMon
by turning Control Knob counterclock­wise to desired temperature range.
Handled Spray Head
Tubing End
Spray Head Adapter
Faucet Fitting
Loading...