COLEMAN
®
BATTERY LANTERN / LANTERNE COLEMAN
®
À BATTERIE
RECHARGEABLE
BATTERY LANTERN
How to Use and Enjoy Your Coleman
®
RECHARGEABLE
LANTERNE COLEMAN®À BATTERIE
Profitez au maximum de votre
TO CHANGE FLUORESCENT BULB
NOTE: This lantern uses an 11-watt Spiral
Fluorescent Bulb (See Parts List for
replacement #).
1. With lantern in normal upright position,
remove small screw along back side just
below clear globe. See Figure 2.
2. Then remove top cover and globe by
unscrewing counterclockwise as shown in
Figure 2.
3. Pull the bulb-holder lever outward away
from the fluorescent tube. See Figure 3.
Then pull bulb from socket.
4. Handle new bulb by socket base only,
avoiding contact with glass. Install new
bulb and push lever inward to secure bulb in place.
5. Assemble top cover and globe to lantern by rotating clockwise until hand tight. Reinstall small
screw on back side of lantern. Check that globe is securely fastened to lantern before
transporting.
THINGS YOU SHOULD KNOW
1. Operating time for this lantern depends on whether it is run continuously or intermittently.
Intermittent operation extends the run time of the battery.
2. In cold temperatures, the fluorescent bulb is more difficult to light and may be dim until it
warms up. Below 20˚F (-7˚C), the bulb may not light.
3. When the fluorescent tube does not light to full brilliance, battery should be recharged. If this is
not done and lantern is used, the tube may become blackened.
4. To clean the outside of the lantern and globe, use only a damp cloth and mild dishwashing
liquid. Avoid excessive water and strong cleaner which can damage lantern.
5. The battery used in this unit is a sealed, lead-acid battery which offers slower drain and longer
operating time than other type batteries available. The battery will never leak acid or corrosive
materials, and when used properly can give reliable, long-lasting power for many years.
Fig. 2
Fig. 4
RECHARGEABLE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
See recyling information that came with your Coleman Battery Lantern.
TO CHANGE NIGHTLIGHT BULB
NOTE: The nightlight in this lantern can be replaced with
Coleman part number 5357-129.
1. Remove nightlight cap by twisting counterclockwise 1/4
turn until cap can be pulled away from lantern. See
Figure 4.
2. Unscrew old bulb and replace with new bulb.
3. Reinstall nightlight cap by twisting clockwise 1/4 turn
until cap is tight.
Fig. 3
**Lantern model
may look slightly
different from the
version pictured.
**La lanterne à
peut légèrement
différer du modèle
illustré.
TM
COLEMAN
®
BATTERY LANTERN / LANTERNE COLEMAN
®
À PILES
Rev 08/2007
5-Year Limited Warranty
The Coleman Company, Inc. (“Coleman”) warrants that for a period of five years from the date of original retail
purchase, this product will be free from defects in material and workmanship. Coleman, at its option, will repair or
replace this product or any component of the product found to be defective during the warranty period. Replacement
will be made with a new or remanufactured product or component. If the product is no longer available, replacement
may be made with a similar product of equal or greater value. No warranty is provided for batteries and lightbulbs.
This is your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable.
Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Coleman dealers, service
centers, or retail stores selling Coleman® products do not have the right to alter, modify or in any way change the
terms and conditions of this warranty.
What This Warranty Does Not Cover
This warranty does not cover normal wear of parts, parts that are not genuine Coleman® parts, or damage resulting
from any of the following: negligent use or misuse of the product; use on improper voltage or current; commercial use
of the product; use contrary to the operating instructions; disassembly, repair or alteration by anyone other than
Coleman or an authorized service center. Further, the warranty does not cover Acts of God, such as fire, flood,
hurricanes and tornadoes. Warranty void if damage to product results from the use of a part other than a genuine
Coleman® part.
COLEMAN SHALL NOT BE LIABLE FOR DEFECTS THAT ARE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR
SERVICE. COLEMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITIONS. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS
LIMITED IN DURATION TO THE DURATION OF THE ABOVE WARRANTY OR CONDITIONS. SOME STATES, PROVINCES,
OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
How to Obtain Warranty Service
Take the product to an authorized Coleman service center. You can find the nearest authorized Coleman service center
by visiting www.coleman.com or calling 1-800-835-3278 or TDD 316-832-8707 in the United States or 1 800 3876161 in Canada. If a service center is not conveniently located, attach to the product a tag that includes your name,
address, daytime telephone number and description of the problem. Include a copy of the original sales receipt.
Carefully package the product and send either by courier or insured mail with shipping and insurance prepaid to:
For products purchased in the United States:
The Coleman Company, Inc.
3600 North Hydraulic
Wichita, KS 67219
The costs of transporting the product to Coleman or an authorized service center for
warranty service is the responsibility of the purchaser.
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
DO NOT SHIP WITH THE BATTERIES INSTALLED.
If you have any questions regarding this warranty please call
1-800-835-3278 or TDD 316-832-8707.
©2007 The Coleman Company, Inc. All rights reserved.
Coleman®, ,
and the shape of the lantern are registered trademarks
of The Coleman Company, Inc.
For products purchased in Canada:
Sunbeam Corporation (Canada) Limited
DBA Jarden Consumer Solutions
20B Hereford Street
Brampton (Ontario) L6Y 0M1
Fluorescent tube(s) contains mercury (Hg) and must be
recycled or disposed of according to local, state or federal
laws. Call (800) 835-3278 or visit www.coleman.com/recycle
for recycling instructions or safe disposal locations.
Carefully read all instructions before use and
save for future reference.
TO CHARGE BATTERY
When the battery is fully discharged, it will take
16 to 18 hours to fully recharge it. To obtain
maximum performance, charge for 18 hours
for the first three cycles. Always charge the
battery immediately after use whenever
possible. Charge indoors using household
source. On a full charge, the continuous run
time is up to 9 hours on LOW and 6 hours on
HIGH. Total run time will increase if the unit is
turned on and off intermittently.
Do not leave the lantern turned on after the battery has stopped, as overdischarging the battery can
cause problems in recharging the battery to a full charge. If this does occur, immediately switch the
lantern off and recharge for 40 hours. After an extended period of storage (more than 6 months),
recharge for the full 16 hours or more.
The light can be recharged after first charging from either a 120-volt AC wall outlet in your home or
garage using the 120-volt AC adaptor, or from a 12-volt DC receptacle in a car, boat, or RV, using the
12-volt DC cigarette plug.
The 12-volt DC cigarette plug is stored inside the base of the unit. Turn base counterclockwise to
open the compartment.
CAUTION: The 12-volt DC cigarette plug was designed to avoid internal short circuits, however, it may
be possible to blow the fuse in some USA vehicles when only the small plug from the lantern is
disconnected and the large cigarette plug remains connected to the 12 VDC cigarette lighter socket.
In this situation, if the small plug contacts the metal of the vehicle, the fuse may blow! Therefore,
always remove the large cigarette plug from the cigarette lighter socket first! This caution applies
to any vehicle, RV, boat, etc., in which the 12-volt DC cigarette plug is used.
NOTE: On some automobiles, the cigarette lighter receptacle is turned on and off by the ignition switch.
To Charge: Connect the small end of the proper adaptor cord to the hole in the lantern collar.
Connect the other end of the adaptor to the appropriate electrical outlet. See Figure 1.
A small red light located on the body, next to the adaptor cord hole, will glow when the
charger is connected correctly. If the red light is not on, the lantern is not being recharged.
Fig. 1
120 VAC
Adapter
12 VDC
Cigarette Plug