Cohero Health BreatheSmart HeroTracker Instructions For Use Manual

HeroTracker® Sensors Instructions for Use

Instructions for Use

HeroTracker® Sensor for Control

HeroTracker® Sensor for Rescue

HeroTracker® Sensor for Diskus

®

1

HeroTracker® Sensors Instructions for Use

Table of Contents

Intended Use......................................................... 1

Contraindications.................................................1

Product Description............................................1

Installation...............................................................3

Usage.........................................................................7

Transferring to a New Inhaler..........................8

Precautions and Warnings................................10

Technical Specifications....................................13

FCC Compliance Information.........................16

Cleaning...................................................................16

Disposal....................................................................17

Limited Warranty...................................................17

Customer Support...............................................17

2

HeroTracker® Sensors Instructions for Use

Intended Use

HeroTracker® sensor is a medication
reminder device intended for single-patient
use to assist physicians and patients in
recording and monitoring the actuations
of prescribed metered dose inhaler (MDI)
or Diskus® inhaler usage. The device is
designed and intended for use by children 5
years of age or older, as well as adults.

Contraindications

The HeroTracker sensor is not intended
for use as an MDI or Diskus inhaler dose
counter, nor is it intended to indicate the
quantity of medication remaining in an MDI
or Diskus.

Product Description

Metered Dose Inhaler (MDI)

Your HeroTracker Sensor for Control

1

HeroTracker® Sensors Instructions for Use

or Rescue tracks your medication use
automatically. When you actuate your
medication, you trigger the sensor in
the HeroTracker device. The date and
time of your dose is then recorded by
the HeroTracker sensor and stored to its
memory.

Diskus® Inhaler

Your HeroTracker Sensor for Diskus tracks
your medication use each time you press
the colored button in the center. After you
actuate your medication, press the button
to alert the HeroTracker sensor of the dose.
The date and time of your dose is then
recorded by the HeroTracker sensor and
stored to its memory.

Bluetooth Pairing and Syncing

If a mobile device paired with the

2

HeroTracker® Sensors Instructions for Use

BreatheSmart mobile app is within range,
the information from the MDI or the Diskus
will be transferred to the app. If not, the
HeroTracker sensor will search once an hour
for a mobile device with the BreatheSmart
mobile app until it is able to sync the data.

Installation

Metered Dose Inhaler (MDI)

Remove the plastic pull tab on the inside
of the HeroTracker Sensor for Control or
Rescue to enable the battery to connect.
To attach your HeroTracker sensor to your

inhaler, rst match the HeroTracker sensor

to the type of medication you will be using.
HeroTracker sensors come in two types, one
for control medication (purple sensor) and
one for rescue medication (teal sensor).

Make sure to match the appropriate
HeroTracker sensor with the type of

3

HeroTracker® Sensors Instructions for Use

medication that matches. Next, unclip the
top strap of the sensor from the connection
pegs. Push the medication canister and
the top part of your MDI through the ring
formed by the HeroTracker sensor until the

HeroTracker sensor securely ts on the MDI.

The SYNC button should be facing away from
the MDI mouthpiece.

Pull down the top strap and connect the
strap to the two connection pegs. Adjust

the t of the HeroTracker sensor on the

medication, so that the trigger sits in the
middle of the top of the medication canister
(see image on the next page).

4