
Advantage DLX
START-UP GUIDE
Overview:
Please read through Start-Up guide prior to beginning installation. Refer to the
DLX User’s Guide located on the website (www.CognitiveTPG.com) for in depth
details on setting up and using the Advantage DLX printer.
Package Contents:
•
(1) Advantage DLX Printer
•
(1) Power Supply
•
(1) Power Cord
•
(1) Serial, Parallel, or USB data cable
•
(1) Start-Up Guide (this document)
NOTE:
All CognitiveTPG printer drivers,
documents, and utilities are located
on the website. If you do not have
Internet access, please call 800 732
8950 x 2474 for a set up CD
Helpful Web Links and Contact Information:
Website: http://www.CognitiveTPG.com
For Technical Support, please contact your local reseller or CognitiveTPG at:
Direct: +1 607 274 2500 ext. 4
Toll Free:+1 800 732 8950 ext. 4
Email: Support@CognitiveTPG.com
Looking for labels for your printer? Check out our new Online Media Selection
Tool.
CognitiveTPG
25 Tri-State International, Suite 200
Lincolnshire, IL 60069
Tel: +1 847 383 7900 Toll free: +1 800 732 8950
Email: sales@CognitiveTPG.com
Web: www.CognitiveTPG.com
105-297-01 Revision C
Page1

Connecting Power, Loading Media, Installing Software
Follow these Steps To Set Up the Advantage DLX Printer:
Connecting Power to the Advantage DLX
1
Printer Power Test
1
2
Press the Power Switch to the ON position.
Note: The Power Light will turn green to indicate the unit is receiving
power. The Ready Light will first turn red, then green.
Press the Power Switch to OFF before proceeding to the next steps.
2
3
Connecting Data Cable
Connect USB, Serial, Parallel or Ethernet Cable to
1
the back of the printer.
2
Installing CognitiveTPG Printer Administrator and Printer Driver
Go to http://www.CognitiveTPG.com/Downloads_18.aspx using your Internet Browser.
1
Follow the applicable instructions under the Utility Section.
2
Connect opposite end of data cable to computer.
Note: Ethernet model not pictured
Note: For more detailed information on installing drivers and configuring your printer using
CognitiveTPG Printer Administrator, please refer to the Advantage DLX Users Guide located
in the download section of the product webpages.
Page 2

Loading Media and Ribbon
Loading Media
1 2
5
Loading Ribbon
1
6
2
3
4
•
For thermal transfer printers proceed
to the loading ribbon section of this
Start-Up Guide.
•
For direct thermal printers go to the
Self-Testing section in this Start-Up
Guide.
3
4
6
5
7
NOTE: the ribbon text on the leader
should be face down in front of the
printer as shown.
8
Page 3

Self-Testing and Maintenance
Self-Testing:
operability and lists the printer’s current settings.
The self test checks the printer’s overall
IMPORTANT! The printer should have media installed, be connected to AC power, and turned off before printing.
1
Turn the printer ON while holding the FEED button.
2
Release the FEED button when the self test starts to print.
3
Turn the printer OFF and then ON again to return to normal printing operation.
Cleaning & Maintenance
Open the print mechanism. Turn the printer off
1
when cleaning the printhead. Make sure the
printhead is completely dry before turning the
printer back on.
Clean the platen (A) and printhead (B) with a
2
soft, lint-free cloth saturated with 99 percent isopropyl alcohol or a certified cleaning pen or card.
Turn the printer on and press the FEED button
3
Advantage DLX Cleaning Supplies
Part #
14-00-0000 2.5” x 6”
14-00-0001 4.5” x 6”
14-00-0002
WARNING—SHOCK HAZARD AND STATIC DISCHARGE:
Never operate the printer in a location where it can get wet. Personal injury could result. The discharge of electrostatic energy that accumulates on
the surface of the human body or other surfaces can damage or destroy the printhead or electronic components used in this device. DO NOT
TOUCH the printhead or the electronic components under the printhead carriage.
CAUTION—PRINTER SETUP AND HANDLING
EUROPEAN COMPLIANCE:
FCC DECLARATION OF CONFORMITY:
WEEE:
INDUSTRY CANADA NOTICE:
This Class A digital apparatus complies with Canadian ICS-003 requirements.
Cet appareil numerique de la Classe A est conforme a la norme NMB-003 du Canada.
Copyright © 2009 CognitiveTPG™ and Advantage DLX™ are trademarks of CognitiveTPG. Other products and corporate names used in this publication may be
trademarks or registered trademarks of other companies and are used only for explanation and to their owner’s benefit, without intent to infringe. No part of
this guide may be reproduced for any purpose or in any form including electronic storage and retrieval without the express permission of CognitiveTPG.
Size
(inches)
none
When installing or modifying the printer setup or configuration, ALWAYS TURN THE POWER OFF before: (1) connecting any cables, (2) performing
any cleaning or maintenance operations, or (3) moving the printer.
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures. RoHS COMPLIANCE: Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and
Electronic Equipment (RoHS).
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at the user’s own expense.
Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). For WEEE recycling and recovery information, refer to the website at
www.CognitiveTPG.com.
Items
per box
25
25
12
Description
Cleaning card
Cleaning card
Cleaning pen
CAUTION! INCORRECTLY CLEANING THE PRINTER
WILL CAUSE PERMANENT DAMAGE AND VOID THE
PRINTER’S WARRANTY. COGNITIVE RECOMMENDS
USING A CERTIFIED CLEANING PEN OR CARD FOR ALL
THE PRINTER’S CLEANING REQUIREMENTS.
Page 4