CODELOCKS CL4510, CL5510, CL6510 User Manual

K3 Connect User Guide

CL4510

CL5510
CL6510

Image for illustration only

Document Version: 0.2
Status: DRAFT
Author: Martin Clayton

REGULATORY COMPLIANCE

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e quipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a part icular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Download the App

The K3 Connect App is available on Apple App Store and Google Play Store

1. Search the App Store (Apple iOS) or Play Store (Android) for the K3 Con­nect App

2. Install the App on your iOS or Android device

3. After installation, open the App

4. If asked, choose whether to allow notifications (unlocking notifications,
etc)

5. Touch Create Account...

K3 Connect App

Search the Apple App
or Google Play stores

Notifications
Choose whether to al­low notifications

Create Account
Click the Create Ac­count button

Enter Details
Enter your details and
choose a password

Validation
Check your email for the
validation code

Success!
The K3 Connect App is
ready for use

Register

1. Enter an account name, email address and choose a password. It is rec­ommended to leave password and backup-to-cloud enabled.

Note: You will need to enter a valid email address that you have access
to. As part of the registration process, an email containing a validation
code will be sent to that email address

2. Touch Next to continue

3. Check your email account for the validation email. Enter the validation
code contained within the email and touch Next

Page 1

Figure 6
Line 2
Line 3

Register a Lock

1. Open the K3 Connect App (if not already open)

2. Touch the + button (top-right) of the screen

3. Enter the lock DIN

CL4510: cl4510
CL5510: cl5410
CL6510: cl6510

4. Enter a name for the lock (we recommend that you choose a meaningful

name)

5. Touch the  icon (top-right) of the screen

6. Enter the following sequence into your lock:

Command: #Master Code • 00 • 1 ••
Example: #12345678 • 00 • 1 ••
Note: If you have changed your Master Code, substitute the

code used in the example above with your own code.

7. The lock will now pair with your phone

8. When complete, you may be prompted to set-up the WiFi Gateway—
touch Not Now. This step will be explained later in this guide

Pairing
Enter the pairing com­mand into your lock

Lock DIN
Use the correct DIN for
your lock

Lock Details
Enter the lock DIN and
choose a name

Lock List
For new accounts, this
list will be empty

Synchronising

The phone and lock will
now synchronise

Page 2

Basic Functions

From the lock list, you can unlock any lock within range1, synchronise, view lock
info and view logs.

1. In the lock list, swipe the lock left

2. You will see Info, Logs and Sync options

Info: View or change lock settings
Logs: View audit entries (synchronise to retrieve latest logs)
Sync: Synchronise the settings between the lock and App and retrieve

latest logs

3. To unlock the lock, simply touch the lock in the lock list — the lock icon will
turn green to confirm unlocked status

4. If asked, choose whether to allow notifications (unlocking notifications,
etc)

5. Click Create Account…

1

Using the lock in conjunction with the WiFi gateway can effectively extend the

range of operation.

Unlocked
Lock status now shows
green

Unlocking
Confirmation of unlock­ing command

Actions
Primary actions availa­ble for the lock

Lock List

All locks paired under
the current account

Page 3

Complete
The synchronisation is
complete

In Progress
The synchronisation is in
progress

Lock List
Select Sync to begin
synchronisation

Page 4

Synchronising

Once you have made changes to the lock settings, added new Clients or need
to see the latest audit information, you need to synchronise the App with your
lock.

1. In the lock list, swipe the lock left

2. You will see Info, Logs and Sync options

Info: View or change lock settings
Logs: View audit entries (synchronise to retrieve latest logs)
Sync: Synchronise the settings between the lock and App and retrieve

latest logs

3. Touch Sync

4. Touch OK once the synchronisation is complete

Note: You will need to be within range of the lock. The effective range is
up to 10m line-of-sight. Objects and walls will affect the effective range.

Delete Sub-Master
Delete the Sub-Master
Code

Master Code
Change the Master
Code

Parameters
Modify the general lock
settings

Parameters

Modify the general lock
settings

Lock Settings

View & access lock in­formation & settings

Sub-Master Code
Change the Sub-Master
Code

Lock Settings & Parameters

The lock settings can be opened by swiping left on the lock in the lock list and
clicking on info (see page 3).

1. The lock settings will now be available. Information displayed will include
the lock name, battery status and date/time information

2. Touch Parameters

3. The parameters screen provides access to all settings that apply to the

lock as a whole including feature selection, day lock-out, code free and

Master & Sub-Master Code changes

4. You can change any setting by touching the setting label or, where avail­able, by sliding the switch to enabled (green) or disabled (grey)

Help: Remember to synchronise to apply the changes to the lock

Master & Sub-Master Codes

1. By default, you lock is preset with the Master Code of 12345678. It is rec­ommended to change this default code to one of your own choice

2. Touch Change Master Code or Change Sub-Master Code to change the
respective code

3. Enter your new choice

4. Touch the  to confirm

You can delete the Sub-Master Code by touching Delete Sub-Master Code on
the parameters screen.

Help: Remember to synchronise to apply the changes to the lock

Page 5

Suspend/Activate
Suspend or activate all
the Code-Free Modes

Set Code-Free Mode
Up to 10 Code-Free
Modes can be set

Code-Free Mode

View current Code-Free
status

Code-Free

Code-Free allows you to set the lock to automatically unlock at pre-determined
times. Up to 10 different Code-Free Modes can be activated.

1. From the Parameters screen (see page 5), touch Code-Free Modes

2. To set a Code-Free Mode, touch the relevant mode (0-9) and select the
days of operation and the start & end times

3. You can activate and suspend all Code-Free Modes by touching the Ac-

tions button. Suspending all Code-Free Modes will revert the lock to nor-

mal operation (normally locked)

Note: A permitted Code-Free Mode will override a non-permitted Code-
Free Mode.

Help: Remember to synchronise to apply the changes to the lock

Page 6