Code Alarm SRT 9000 User Manual
Remote Vehicle Control System
SRT 9000
Owner's Manual
Deluxe Vehicle Security and Remote
Start System with 900Mhz Two Way
Confirming OLED Remote Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this
manual is applicable to most vehicles. However, due to the configuration of some vehicles, some
functions AND/OR SAFETY PRECAUTIONS may not apply . Please see your installing dealer for more
information.
1
Table of Contents
2-Way Transmitter Main Display Screen ........................................................................................ 4
2-way transmitter button descriptions and locations
Charging the Battery....................................................................................................................... 5
2-way transmitter main display page
Vehicle Menu Option on the 2-Way Transmitter..........................................................................7
Menu options for the 2-way transmitter
Settings for the 2-Way Transmitter .............................................................................................. 8
Button beeps
Button lock
Melody / vibration mode
Demo mode
Settings for the 2-Way Transmitter, continued ........................................................................... 9
Power save mode
Parking meter setting
Parking area setting
Settings for the 2-Way Transmitter, continued ......................................................................... 10
Lighting for the 2-way transmitter
Clock adjustment
Alert alarm timer
Settings for the 2-Way Transmitter, continued ......................................................................... 11
Count down timer
Daily start timer
Name of TX setting
Settings for the 2-Way Transmitter, continued ......................................................................... 12
Name of channel setting
Language setting
Set to defaults
Resetting the 2-way transmitter
Using Your Remote Control ........................................................................................................ 13
Arming the security system
Arm with sensor bypass
Hidden alarm feature
Active/Passive arming
Using Your Remote Control, continued..................................................................................... 14
Disarming the security system
Two stage door unlock*
Attemped intrusion identification
Activating the trunk release feature*
* May require additional installation labor, components and installation cost
2
Table of Contents, continued
Using Your Remote Control, continued..................................................................................... 15
Activating optional AUX 1*
Activating optional AUX 2*
Activating optional AUX 3*
Activating optional AUX 4*
Using the progressive car finder feature
Using the personal protection alarm
Using Valet Mode .......................................................................................................................... 16
Using Your Remote V ehicle St arter ............................................................................................. 16
Remote starting your vehicle
Entering the vehicle while it’s running via remote start
Using Your Remote V ehicle St arter, continued ......................................................................... 17
Preheating or precooling the vehicle’s interior
Using the quick stop feature
Operating the 1/2/3 hour start up timer mode
Using Your Remote V ehicle St arter, continued ......................................................................... 18
Operating the daily start timer
Using the safety control switch
Remote start safety features
Using the optional turbo timer
Additional System Features .......................................................................................................... 19
Page call out
Check vehicle status
Check temperature
Trigger check
Multiple vehicle operation
Anti Hi-Jack Mode ......................................................................................................................... 20
Quick Reference Operation Guide .............................................................................................. 20
Quick Reference Operation Guide, continued .......................................................................... 21
Replacing Remote Control Batteries .......................................................................................... 22
Emergency Override Procedure ................................................................................................... 22
Lifetime Warranty.......................................................................................................................... 22
3
2-Way Transmitter Main Display Screen
OLED MAIN DISPLAY SCREEN
Door Lock
Door Unlock
Temperature
Transmitter Name
Timer
In Range Indicator
Alarm Status
Car Jacking
Engine Running
ount Down Timer
Parking Timer
Timer Start
Battery Level
Melody Mode
Vibration Mode
Alert Alarm
2-Way Transmitter Button Descriptions / Locations
SWITCH
BUTTON
CHARGING
PORT
RESET BUTTON
SWITCH
BUTTONS 1 -4
4
Charging the Battery
Main Display Page
Y our 2-way transmitter is powered by a built-in 3.7V lithium polymer battery . When the screen displays low battery or
the icon is flashing it is time to recharge your remote transmitter. Charge the transmitter battery using the
supplied plug-in home charger. While the battery of the transmitter is being charged you can push the “ ” side button
to check it’s charging status. When the screen displays “BATTERY FULL” unplug the charger . Note that it will be
necessary to charge the battery before use.
Low Battery Display
Battery Charging
2-Way Transmitter Main Display Page
To display the main p age of the 2-way transmitter press the “ ” icon button, the screen will display the main display
page and the system status. In the case that an icon is flashing on the main display page press the “ ” icon button
once again to view the detail of the flashing icon as in the following examples.
When “TRIGGERED” is displayed, press the “ ” icon button to display which input was triggered.
5
2-Way Transmitter Main Display Page, continued
When the remote start “ ” icon is flashing press the “ ” icon button to display the remote start status.
When the count down timer “ ” icon is flashing press the “ ” icon button to display the count down timer. Use
buttons numbered 1-4 to start, stop or exit the countdown timer mode.
When the start timer “ ” icon is flashing press the “ ” icon button to display the daily start timer, timer start or
temperature start, depending on which you have selected.
or
When the alert alarm timer “ ” icon is flashing press the “ ” icon button to display the alert alarm timer. Use
buttons numbered 1-4 to start, stop or exit the alert alarm timer mode.
or
6
Vehicle Menu Options on the 2-Way Transmitter
Menu 5
Menu 6
Main
Menu 5
The 2-way transmitter allows multiple operations from the main four buttons by scrolling through the menu screens
and selecting the desired function. T o scroll through the menu screens press the “ ” switch up until the desired
function is displayed. Press the corresponding button number (1-4) within five seconds as displayed to the left of
each function.
Menu 1
Menu 2
Menu 3
Menu 4
Menu Options for the 2-Way Transmitter
The 2-way transmitter has multiple convenience features that are selectable from the main four buttons by scrolling
through the menu screens and selecting the desired feature. T o scroll through the menu screens press the “ ”
switch down until the desired function is displayed. Press the corresponding button number (1-4) within five seconds
as displayed to the left of each function.
Menu 1
Menu 2
Menu 3
Menu 4
7
Settings for the 2-Way Transmitter
Button Beeps
The 2-way transmitter buttons will respond with a short “beep” sound when pressed. T o turn this feature on or off
scroll to menu 1 and select BUTTON BEEPS, then use the corresponding transmitter buttons to make your
selections. Press the side “ ” button in to exit and return to the main page.
Button Lock
To lock or unlock the 2-way transmitter buttons scroll to menu 1 and select BUTT ON LOCK, then use the
corresponding transmitter buttons to make your selections. Press the side “ ” button in to exit and return to the
main page.
or
or
Melody / Vibration Mode
The 2-way transmitter confirms vehicle commands with a melody and on screen display. To switch between melody ,
vibration or both, scroll to menu 1 and select MELODY & VIBRATION, then use the corresponding transmitter
buttons to make your selections. Press the side “ ” button in to exit and return to the main page.
or
Demo Mode
To view a quick demo of some of the on screen displays scroll to menu 1 and select DEMO MODE, then use the
corresponding transmitter buttons to make your selections. Press the side “ ” button in to exit and return to the
main page.
8
Loading...