Code Alarm 101515-5 User Manual
Remote Vehicle Control System
TM
PC 7400
1
Owner's Manual
Keyless Entry & Remote
Start System
IMPORT ANT NO TE: The oper ation of the P ower Code as described in this
manual is applicable to most vehicles. However, due to the engine type
and configuration of some vehicles (i.e. diesel engines), some functions
AND/OR SAFETY PRECAUTIONS may not apply. Please see your
installing dealer for more information.
101515-5
2
Table of Contents
Features and Benefits of the PowerCode PC 7400
TM
.....................
Using Y our Remote Transmitter .............................................. 4
Locking the Vehicle
Starter Disable
Unlocking the Vehicle
Two-Stage Door Unlock
Activating the Trunk Release Feature
Turning on the Vehicle Headlights
Using the Car Finder Feature
Personal Protection Alarm (Panic)
Remote Start / Stop Feature
Using Your Remote Starter ...................................................... 6
Starting Your V ehicle
If your vehicle stalls or does not start
Remote Start Safety Features
Entering the Vehicle While it is Running via Remote Start
Pre-Heating or Pre-Cooling the Interior of the Vehicle
Turning on the Rear-Window Defroster
Using the “Quick-stop” Feature
Automatic Convenience Options ............................................ 7
System Maintenance ................................................................ 7
Changing the Remote Control Battery
Adding Remote Controls to Your System
Deleting Lost or Stolen Remote Controls from Your System
3
Basic Troubleshooting .............................................................. 9
Emergency Disarm Procedure .......................................... 1 0
Emergency Disarm Button Location
Installer Programmed Options
Your Code Systems, Inc. Limited Lifetime Warranty...........11
Features and Benefits of the PowerCode PC 7400
Two Easy-to-Use Weather-Resistant Remote Controls
TM
The remote controls included with the PowerCode PC 7400TM utilize
durable, moisture resistant cases and sealed rubber buttons for
reliability and long life. Rolling code technology prevents the
transmitter signals from being duplicated. The button functions are
clearly labeled to make the PowerCode PC 7400TM simple to operate.
Starter Disable
The PowerCode PC 7400TM protects your vehicle from theft by
disabling the starter when the vehicle is locked.
Remote Keyless Entry
The PowerCode PC 7400TM conveniently locks and unlocks vehicle
doors and opens the trunk or hatch by remote control.*
Personal Protection Features
Remote Panic Alarm, Headlight Control, Illuminated Entry,
and Car Finder are among an array of features that enhance
personal safety.**
Remote Start
The PowerCode PC 7400TM allows you to warm up your vehicle
and preheat or pre-cool the interior with the press of a button on
the remote control.
3
PowerRange
This long-range antenna allows you to operate the PowerCode PC
TM
7400
TM
Antenna
from distances of up to 1/8 mile. Remote-start your vehicle
from the safety of your home, apartment or office building.
* If vehicle is equipped with power door locks and they are connected to the alarm system by your installer.
** May require additional connections, components, and/or charges. See your installer for details.
4
Using Y our Remote T ransmitter
Press to LOCK the
Vehicle Doors*
Press and hold to turn on
headlights
Press to UNLOCK
Vehicle Doors
Press and Hold
to open trunk
Press for Car Finder
Press and Hold for
Panic Alarm
Press LOCK then
Press START within 2
seconds for Remote
Start/Stop
Press to turn on Rear
Defroster*
Press for two-car
operation (SHIFT)
Locking the V ehic le Doors
To lock the doors, exit the vehicle, close all doors, then press* the
LOCK button. The status indicator (red warning light on the dash) will
blink steadily, once per second, if equipped.
Unlocking the V ehicle Doors
To unlock the vehicle, press the UNLOCK button. The horn will “honk”
and the parking lights will flash once, and the doors will unlock.
The courtesy light will turn on for 1 minute, or until the vehicle is started.
* Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing
for more than 1 second.
†
If you have chosen the Silent Arming Option, the horn will not sound when locking or unlocking until the
appropriate button is pressed a second time.
Loading...