![](/html/3d/3d10/3d10b8695b70e872118ef8e37ab046c477d8f62c6e45640fc9295108348a45b4/bg1.png)
Sentry-H 6110-MP - Regulatory Information
This regulatory information refers to the Codan
Sentry®-H 6110-MP transceiver.
Supporting Documents
• Sentry-H 6110-MP Operator Guide
Codan Part Number: 15-04200-EN
• International Warranty Information Sheet
Codan Part Number: 15-50161-EN
Modication
The grantee is not responsible for any changes
or modications not expressly approved by
the part responsible for compliance. Such
modications could void the user’s authority to
operate the equipment.
Toute modication non approuvée explicitement
par le fournisseur de licence de l’appareil peut
entraîner l’annulation du droit de l’utilisateur à
utiliser l’appareil.
Technical Specication
The RF unit operates over a frequency range of
0.25 MHz to 30 MHz (receive), and 1.6 MHz to
30 MHz (transmit).
Transmit output power at the RF connector (J1)
is maximum 30W PEP +/- 0.5 dB into 50 Ohms.
Setup
The 6110-MP requires nominal 12V DC up
to 5A which is supplied by a battery in the
attached battery housing. An setup guide can
be found in the 6110-MP Operator Guide.
RF Exposure
The antenna gain used with this transmitter
should be 0dBi or less and all persons should
maintain a minimum safe operating distance as
specied in the table below.
Warranty Information
Warranty information for this product is
available on the International Warranty
Information Sheet that is included in the
product packaging.
Options and accessories
Several hardware and software options
accessories are available for the 6110-MP, refer
to the product information sheet for a list of
authorised companion products.
Safety Information
To ensure that safe operation of the transceiver
is achieved, Codan recommends that the
transceiver, antenna and grounding kit are
attached in accordance with the 6110-MP
Operator Guide and the Quick Reference Card
supplied with your antenna.
Codan Part Number /
Numéro de pièce Codan
Antenna Name /
Nom de l’antenne
Safe Operating Distance /
Distance de fonctionnement
15-00472 Tape Whip 1,5m 0.6 m
15-00473 Collapsible Whip 3m 0.6 m
15-00474 Broadband Dipole 30W 1.0 m
15-00475 End Fed Broadband
1.0 m
Dipole 30W
15-00476 Antenna, Long Wire c/w
0.2 m
Adapter
sûre
Head ofce
Codan Limited
ABN 77 007 590 605
Technology Park
2 Second Avenue
Mawson Lakes, SA 5095
AUSTRALIA
Telephone +61 8 8305 0311
Facsimile +61 8 8305 0411
support@codancomms.com
© Codan Ltd. 2020 12-XXXXX-EN, Issue 1
![](/html/3d/3d10/3d10b8695b70e872118ef8e37ab046c477d8f62c6e45640fc9295108348a45b4/bg2.png)
CE Statement
Hereby, Codan Limited declares that the radio
equipment type 2410 complies with Directive
2014/53/EU. The full text of the EU declaration
of conformity is available at the following
internet address:
www.codancomms.com/compliance
FCC Statement
This devices complies with Part 15 of the FCC
Rules. Operation is subject to the following
conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
IC Statement
This product meets the applicable Innovation,
Science and Economic Development Canada
technical specications.
Avis de conformité Canadien
Le présent produit est conforme aux
spécications techniques retenues par
l’Innovation, Sciences et Développement
économique Canada (ISDE).
Disposal and recycle information
This symbol indicates that the equipment
and its electrical accessories should not
be disposed of as household garbage.
These items should not be disposed of as
unsorted municipal waste and should be taken
to a certied collection point for recycling and
proper disposal. Disposal of this device is
subject to WEEE Directive recast (Directive
2012/19/EU). The purpose of separating WEEE
from other waste is to minimise the potential
environmental impacts and human health risk
of any hazardous substances that may be
present.