Cocos Smart Sense Quick Installation Manual

Quick Installation Guide

Smart Sense Set

Gateway with sensors

CoCoSo is a part of preussen automation
GmbH.

preussen automation GmbH

Flurweg 11 | 82402 Seeshaupt | Germany

www.cocoso.eu | [e-mail]

Smart Sense Set

This is a quick installation guide for you.
Please read this entire guide attentively
before using our products.

The CoCoSo Smart Sense Set centers on
Smart Sensor Gateway which works together
with smoke detector, Smart Button (door
bell), door and motion sensor. After some

Sense Set to remotely monitor indoor tem­perature, humidity, pressure, ambient light,
motion, noise level, smoke and contact

Smar t Sensor Gateway Smoke Detector

Door Sensor Motion Sensor Smar t Button

simple configurations you can use Smart

(e.g. open window or door).

Step 3

Add Smart Sensor Gateway

Make sure your smartphone is connected to
the Wi-Fi. Tap “Add new device” and select
Smart Sense Set.

Then follow the prompts to configure your

Add new device

Quick Instruction

Step 1

Download App

Scan QR-Code below with your smartphone
or search for CoCoSo WIFI App in Google
Play Store. Download the CoCoSo App and
install it.

Sign up or log in directly.

Android

CoCoSo App is available for all Android
devices free of charge.

Step 2

Plug into the power outlet

device.

Step 4

Add sensors

Put your finger on the touch button of the

Smart Sensor Gateway or tap “Add new
sensor” in the Smart Sense menu to start

the pairing.

Then use a needle to press the pairing
button on the sensor. If a voice sounds

“The sensor is paired” and the Gateway
indicator stays blue, the pairing was
successful.

Smart Button

Motion Sensor

Door Sensor

Smoke Detector

Specification

Smart Sensor Gateway

Output: DC 5 V | 1 A maximum | Micro USB

Temperature measurement: -10°C to 60°C

Humidity measurement: 5 % to 95 % RH

Tolerance: ± 4 %

Pressure measurement: 300 to 1200 mbar

Tolerance: ± 3 mbar

Light measurement: 0 to 8300 lux

Tolerance: ± 3 %

Noise measurement: 30 to 130 db

Tolerance: ± 3 %

Door and window sensor

Battery type: CR2032 | Weight: 30 g
Dimension: 58 x 29 x 13.3 mm

Motion sensor

Battery type: 2 x AA | Weight: 45 g

Effective detection: 120 degree | 5 m

Dimension: 46.8 x 66.8 x 31.5 mm

Smart Button (door bell)

Battery type: CR2032 | Weight: 27 g
Dimension: 51 x 51 x 19 mm

Smoke detector*

Battery type: 6LR61 | 9 V | Weight: 84 g
Dimension: 103 x 103 x 34 mm

* Attention: Smoke detector has no certification

according to DIN14676.