Cocoon Skyview HE170642 Instruction Manual

VERSION 1.1

Model Number: HE170642

INSTRUCTION MANUAL

Version 1.0
Date of Issue 23/08/18

WARRANTY DETAILS

SKYVIEW HD QUADCOPTER

.

Warranty Details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The benets
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.

AFTER SALES SUPPORT

AUS

[e-mail]1300 663 907

MODEL: HE170642 PRODUCT CODE: 64115 12/2018

1

YEAR WARRANTY

2

SAFETY INSTRUCTIONS

Follow the instructions and take notice of all warnings to reduce risk of fire or electric
shock.

• Read the instructions in this manual thoroughly before operating your Cocoon

Skyview HD Quadcopter

• The Cocoon Skyview HD Quadcopter must be operated safely at all times. It is the

operator’s responsibility to always fly in safe conditions

• Always check each component of the Cocoon Skyview HD Quadcopter is operating

correctly before flying

• Always follow local aviation rules and regulations when flying the Cocoon Skyview

HD Quadcopter

• Do not fly the Cocoon Skyview HD Quadcopter in windy, rainy or low light

conditions

• Always keep the Cocoon Skyview HD Quadcopter in direct line of sight

• Always ensure your flight area is safe

• If a problem occurs with the Cocoon Skyview HD Quadcopter, always contact the

supplier before attempting to fly again

• Non-rechargeable batteries are not to be recharged

• Rechargeable batteries are to be removed from the Skyview before being charged

• Rechargeable batteries are only to be charged under adult supervision

• Exhausted batteries are to be removed from the Skyview

• The supply terminals are not to be short circuited

• Do not leave Cocoon Skyview HD Quadcopter or batteries near a heat source such

as fire or heater or in direct sunlight

• Do not immerse Cocoon Skyview HD Quadcopter or batteries in water

• Keep Cocoon Skyview HD Quadcopter and batteries in a cool dry place

• Only use the provided charger to recharge the rechargeable battery

• The charger is for indoor use only

• The socket outlet shall be installed near the rechargable battery and shall be easily

accessible when charging

• Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

WARNING:

• This quadcopter is not a toy and can cause severe damage or injury if used incorrectly. If you have never
flown a quadcopter before read the full manual before attempting to fly.

• Propellers are hazardous moving parts, when they are unlocked keep fingers and other body parts away
from them.

• Incorrect operation of the Cocoon Skyview HD Quadcopter may result in severe injury, loss of property or
fines. Winplus Australasia does not take any responsibility if local rules and regulations are not followed.
Loss of the Cocoon Skyview HD Quadcopter is NOT covered by warranty.

The product has been tested according to AS/NZS 60950.1, AS/NZS 4268 and
AS/NZS CISPR 32.

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

4

2

RULES & REGULATIONS

The following regulations must be followed when operating a camera drone or
quadcopter in Australia.

• You must only operate this aircraft in your line-of-sight in daylight

• You must not fly closer than 30 metres to vehicles, boats, buildings or people

• You must not fly over populous area, such as beaches, other people’s backyards,

heavily populated parks, or sports ovals where there is a game in progress

• If you are in controlled airspace, which covers most Australian cities, you must not

fly higher than 400 feet (120 metres)

• You must not fly within 5.5 km of an airfield

• It’s illegal to fly for money or economic reward unless you have an unmanned

operator’s certificate issued by the Civil Aviation Safety Authority (CASA)

Source: http://www.casa.gov.au/

It is the quadcopter operator’s responsibility to regularly check the current rules
and regulations.

This product and/or service is not affiliated with, endorsed by, or in any way
associated with GoPro Inc. or its products and services. GoPro, HERO, and their
respective logos are trademarks or registered trademarks of GoPro, Inc.

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

5

2

WARRANTY NOTE

Getting the most out of your Skyview

Read the manual carefully
It will help you set up with ease

Visit www.winplus.com.au
We have additional support videos and guides

Call After Sales Support - 1300 663 907
Available Monday - Friday, 8:30am - 6:00pm AEST

Email [e-mail]
We’re always happy to help

BATTERY NOTE

• Non-rechargeable batteries are not to be recharged

• Rechargeable batteries are to be removed from the Skyview HD Quadcopter before

being charged

• Rechargeable batteries are only to be charged under adult supervision

• Exhausted batteries are to be removed from the Skyview HD Quadcopter

• The supply terminals are not to be short circuited

• Do not leave batteries near a heat source such as fire or heater or in direct sunlight

• Do not immerse batteries in water

• Keep batteries in a cool dry place

• Only use the provided charging adaptor to recharge the rechargeable battery

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

6

CONTENTS

Warranty Details 3
Safety Instructions 4
Rules & Regulations 5
Warranty Note 6
Battery Note 6
Parts List 8
Technical Specifications 8
Features 8
Product Overview 9

1.1 Cocoon Skyview HD Quadcopter 9

1.2 Remote Control 10

Installation 11

2.1 Installing the Control Batteries 11

2.2 Charging the Cocoon Skyview HD Quadcopter Battery 11

2.3 Installing the Landing Skids 11

2.4 Installing the Propeller Guards 11

2.5 Installing the Camera (optional) 12

2.6 Insert the Rechargeable Battery into the Skyview HD Quadcopter 12

2.7 Installing & Replacing the Propellers 13

Operation 13

3.1 Pairing the Skyview HD Quadcopter to the Remote Control 13

3.2 Unlocking Flight Controls 13

My First Flight 14
Flying The Skyview 15

4.1 First Flight and Auto Hover 15

4.2 Landing the Skyview HD Quadcopter 15

4.3 Flight Controls 16

Other Functions 17

5.1 Auto Trim Function 17

5.2 Speed Selection 17

5.3 One-Key Take Off/Land Function 17

5.4 Headless Mode 17

Taking Photos & Videos 19

6.1 Taking a Photo 19

6.2 Recording a Video 19

6.3 Downloading Photos and Videos onto your PC 19

6.4 Mounting your Action Camera onto the Skyview HD Quadcopter 19

FAQs 20
Disposal 21
Maintenance and Storage 21
Repair and Refurbished Goods or Parts Notice 22

2

PARTS LIST

• 1 x Cocoon Skyview HD

Quadcopter

• 1 x Remote Control

• 1 x Rechargeable Battery

– Internal

• 1 x Charging Adaptor

• 1 x Screwdriver

• 1 x 720P Camera

• 1 x 4GB MicroSD Card

• 1 x Gimbal

• 4 x AA Activ Energy

Batteries

• 4 x Propeller Guards

• 4 x Landing Skids

• 8 x Propellers (4 on

Skyview HD Quadcopter,
4 spare)

• 8 x Sets of Accessories

(caps and screws) (4 on
Skyview HD Quadcopter,
4 spare)

TECHNICAL SPECIFICATIONS

QUADCOPTER

• Quadcopter Battery: 7.4V, 2000mAh

• Frequency: 2.4GHz (4 Channel)

• Gyro: 6 Axis

• Control distance: 150m

• Charging time: 180 mins

• Flying time: 10 - 12 mins without load per charge*

• Remote Control: 4 x AA Activ Energy (included)

• Memory Card: Up to 32GB MicroSD

• Adaptor Input: 100-240V ~ 50/60Hz 0.3A

• Adaptor Output: 7.4Vdc 850mA

FEATURES

• Auto hover feature ensures professional looking videos with fluid movement

• Up to 150m control distance

• Headless mode built in to maintain orientation during flight

• Flight times 10 - 12 minutes without load per charge*

*Flight times will vary depending on flying conditions, flight pattern, battery performance

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

8

2

PRODUCT OVERVIEW

1.1 Cocoon Skyview HD Quadcopter

1

1. Propeller Guards

2. Landing Gear

5

4

2

3

3. Camera

4. Gimbal

5. Propellers

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

9

2

PRODUCT OVERVIEW

1.2 Remote Control

1

2

3

4

5

6

7

17

16

15

14

13

12

11

8 109

1. Photo/Video - Tap to take a photo, hold for 3 seconds to start recording video, tap

again to stop recording

2. High/Low Speed - Adjust the flight speed of the Quadcopter

3. Left Stick - Ascend/descend, turn left/right

4. Trim Camera Forward - Press to angle the camera forward

5. Trim Rotate Left - Press to rotate the quadcopter to the left

6. Emergency Stop - Stop all motors immediately, pull the left stick to the lowest position,

then tap Emergency Stop Button

7. Trim Camera Backward - Press to angle the camera backward

8. Trim Rotate Right - Press to rotate the quadcopter to the right

9. Power - Turn the remote on/off

10. Trim Fly Left - Press to roll the quadcopter to the left

11. Trim Backward - Press to angle the quadcopter backward

12. Headless Mode - Press to turn on/off headless mode

13. Trim Fly Right - Press to roll the quadcopter to the right

14. Trim Forward - Press to angle the quadcopter forward

15. Right Stick - Fly forward/backward, fly left/right

16. Stunt Button - Press and then move the Right Stick in any direction to perform stunt

17. Take Off/Land - Press to perform one touch take off or landing

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

10

2

INSTALLATION

2.1 Installing the Control Batteries

a. Unscrew and remove the battery cover
b. Install 4 x AA batteries into the back of the Remote

Control, taking note of the polarity positions indicated

c. Replace the cover and screw into place

2.2 Charging the Cocoon Skyview HD Quadcopter Battery

a. Unscrew and open the Skyview HD Quadcopter battery cover and take the

lithium battery out of the battery case

b. Plug the charging adaptor into the power supply. Connect the charger cord end

of the socket to the battery socket

c. When charging, the charging adaptor’s LED light will be red. When the charging

adaptor’s LED light turns green, charging is complete

d. Charging time is approximately 180 minutes

e. When charging is complete, reconnect the battery plug to the circuit board plug,

inside the Skyview HD Quadcopter

f. Close battery cover of the Skyview HD Quadcopter and screw into place

2.3 Installing the Landing Skids

a. Insert the landing skids into the bottom of the Skyview HD

Quadcopter as shown

b. Secure the landing skids with the included screws

2.4 Installing the Propeller Guards

a. Push the propeller guard into the slot until you hear a ‘click’
b. Secure the propeller guard with the included screws

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

11

2

2.5 Installing the Camera (optional)

a. Insert the MicroSD card into the camera
b. Insert the camera into the gimbal. The latch at the top of the camera mount will

lock the camera in place

c. Slide the gimbal into the base of the Skyview HD Quadcopter

PLEASE NOTE: Camera needs to face the front of the Skyview HD Quadcopter

d. Plug both data cables into the corresponding plugs near the Skyview HD

Quadcopter’s on/off switch

e. When you need to uninstall the camera, unplug the data cables and push the

latch at the top of the camera mount up. Pull the camera forward to remove

2.6 Insert the Rechargeable Battery into the Skyview HD Quadcopter

a. Unscrew and open the battery cover on the Skyview HD Quadcopter and locate

the circuit board plug with the red and black wires. You may need to gently pull
the wire out if it is not immediately visible

b. Connect the battery plug to the circuit board plug, inside the Skyview HD

Quadcopter

c. Gently place the battery and wiring back inside the Skyview HD Quadcopter

and close the cover

d. Screw the battery cover

back into place

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

12

2

2.7 Installing & Replacing the Propellers

Each propeller is marked with an arrow indicating the turning direction during flight.
Each arm of the Skyview HD Quadcopter has a corresponding direction as indicated
in the image. Always ensure the arrow direction on the propeller
matches the direction on the arm, otherwise the quadcopter will
not fly correctly.

To replace Propellers:

a. Pull off the silver caps
b. Using the included screwdriver, unscrew the plastic spacer

as shown and remove

c. Remove the washer and damaged propeller

d. Replace the washer and propeller taking note the arrow

on the propeller matches the direction of the arrow on the
arm

e. Take note of the hole position on the pin and replace the

spacer and screw into place

f. Replace the silver cap

g. Repeat steps a-f as necessary for the remaining blades

OPERATION

3.1 Pairing the Skyview HD Quadcopter to the
Remote Control

a. Turn the Skyview HD Quadcopter power switch to ON

and place on a flat surface. The LEDs will flash to indicate
the Skyview is in pairing mode

b. Press the power button on the remote control and you will

hear a beep. The remote control will automatically pair
with the Skyview and beep again. Once the LEDs on
the Skyview are solid, the remote control has successfully
paired. If it does not pair, turn the remote off and then on
again

3.2 Unlocking Flight Controls

a. To unlock flight controls, push both the left and right

throttles down and away from each other as shown in the
image

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

13

2

MY FIRST FLIGHT

• We recommend operating the drone in a large outdoor space such as a field to

ensure you are familiar with all controls

• Always use the provided propeller guards and ensure that you have plenty of open

space to practice

• Never fly the Skyview HD Quadcopter on windy days

• Always keep the Skyview HD Quadcopter in direct line of sight

• Practice unlocking and locking the flight controls to get a feel for take-off and

potentially emergency landing

• To land, hold the throttle down until the blades slow and COMPLETELY stop. You

may need to slightly correct the direction while the Skyview HD Quadcopter adjusts
to the correct altitude

• Do not fly more than 5m high until you are confident you can control the Skyview

HD Quadcopter

• It is your responsibility to abide by local laws and regulations. Always keep up to

date on any changes. Never fly within 30m of people, 5.5km of airports or above
120m

WARNING: Incorrect operation of the Skyview HD Quadcopter may result in severe injury, loss of property
or fines. Winplus Australasia does not take any responsibility if local rules and regulations are not followed.

Loss of the Skyview HD Quadcopter is NOT covered by warranty

TIP: The best way to know which direction the Skyview HD Quadcopter is facing, is by the coloured LEDs on
its base. The green lights will face forwards, while the blue lights face backwards

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

14

2

FLYING THE SKYVIEW

4.1 First Flight and Auto Hover

a. After unlocking flight controls, push the left throttle up to increase the altitude to

approximately 5m

b. Release the throttle and the Skyview HD Quadcopter will hover at this height

c. Use the left throttle to turn left or right as needed
d. Use the right throttle to move left, right, forwards and backwards
e. Use the forwards / backwards / left / right trim controls to fine tune hovering

IMPORTANT NOTE: If you find your drone is veering in a certain direction, you will need to manually trim
the drone during flight to keep the drone steady. For more information on this function see page 17

4.2 Landing the Skyview HD Quadcopter

a. Push and hold the left throttle down to lower the Skyview HD Quadcopter to

ground level

b. Continue holding the throttle down making slight corrections as needed until the

propellers slow and eventually stop

c. Turn off the remote control and power off the Skyview HD Quadcopter

IMPORTANT NOTE: If the both the blue and green LEDs begin flashing while you are flying your Skyview HD
Quadcopter, this indicates the battery is running low. Land immediately on a level surface

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

15

2

FLYING THE SKYVIEW

4.3 Flight Controls

Ascending and descending

Push the throttle stick up (left stick) and the
speed of the main blades will increase
making the Skyview HD Quadcopter ascend

Pull the throttle stick down, and the spinning
speed of the main blades will decrease.
The Skyview HD Quadcopter will begin to
descend

Turning Left and Right

Push the rudder stick to the left, and the
Skyview HD Quadcopter will turn to left.

Push the rudder stick to the right, and the
Skyview HD Quadcopter turn will turn to
right

Moving Forward and Backwards

When the rudder stick is pushed upward,
the Skyview HD Quadcopter swashplate will
down tilt and advance forward

When the rudder stick is pushed downward,
the Skyview HD Quadcopter will uptilt and
recede

After Sales Support

1300 663 907

Moving Left to Right

When the right rudder stick is pushed to the
to the right, the Skyview HD Quadcopter
will fly to the right

When the right rudder stick is pushed to the
to the left, the Skyview HD Quadcopter will
fly to the left

[e-mail]

Model Number

HE17064

16

2

OTHER FUNCTIONS

5.1 Auto Trim Function

Push both left and right throttles down towards the right at a
45-degree angle as indicated in the diagram for 5 seconds.
When the lights of the Skyview HD Quadcopter are flashing
rapidly, release the throttles and the light on the Skyview HD
Quadcopter will remain lit, indicating auto trim is complete

NOTE:

• Auto trimming should be completed when the quadcopter is stationary and
on the ground

• You may need to manually trim your drone multiple times during flight due to
air flow conditions

5.2 Speed Selection

Press the high/low speed button to toggle the speed of flight.
It is recommended you only fly in the default low speed mode
until you are confident in your abilities. More speed means
bigger crashes. This can result in damage to the Skyview HD
Quadcopter or other property. Damage through incorrect use and poor control will void
your warranty

NOTE: When changing speed modes, one beep on the remote indicates you
have selected the slowest speed, two beeps indicate medium speed, and three
beeps indicate highest speed selected

5.3 One-Key Take Off/Land Function

a. Turn on and unlock flight controls
b. Press the one key take off/Land button

c. The Skyview will automatically raise altitude and hover

d. Press the button again and the Skyview will lower to the

ground. Adjust the direction until the Skyview propellers
come to a stop

5.4 Headless Mode

Headless mode allows you to focus on the direction of the drone
with the right throttle without worrying about the orientation
of the Skyview. This is useful for beginners or if you’d like to focus your camera in a
particular direction

a. To activate headless mode on your Skyview HD Quadcopter, quick press the

headless mode button until the remote control makes a double beep sound

b. Press the button again to deactivate headless mode

NOTE: When headless mode is activated, the LED lights will flash. The Skyview HD Quadcopter will
automatically set the side moving forward as the front direction for headless mode

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

17

2

5.5 Performing Tricks

Once you are familiar with basic flight operations, you can:

a. Fly the Skyview to a height of more than 3 metres
b. Perform tricks such as flips with your Skyview, in any speed settings

WARNING:

• Make sure you allow enough space both above and below your Skyview before attempting to perform
flips

• Never attempt tricks with bent or damaged propellers or guards

• Remove the camera before attempting tricks and stunts

• Fully charge the battery before attempting the 360-degree flip. If the battery power is low, the drone will
not be able to perform the 360-degree flip

Press the stunt button once and push the right throttle
to the left to perform a 360-degree left flip.

Press the stunt button once and push the right throttle
to the right to perform a 360-degree right flip.

After Sales Support

1300 663 907

Press the stunt button once and push the right throttle
forward to perform a 360-degree forward flip.

Press the stunt button once and push the right throttle
down to perform a 360-degree backward flip.

[e-mail]

Model Number

HE17064

18

2

TAKING PHOTOS & VIDEOS

6.1 Taking a Photo

NOTE: Ensure you have inserted a MicroSD card into the camera and the data cable is plugged into the
corresponding plug near the Skyview HD Quadcopter’s on/off switch

To take a photo, press the photo button. The remote control will beep once, indicating
a photo has been taken

6.2 Recording a Video

NOTE: Ensure you have inserted a MicroSD card (Up to 32GB) into the camera and the data cable is
plugged into the corresponding plug near the Skyview HD Quadcopter’s on/off switch.

To take a video, hold down the photo/record button down for 3 seconds. The remote
control will beep once, indicating video is recording. To stop recording, press and hold
the record button again for 3 seconds until you hear the long beep indicating recording
has stopped

IMPORTANT NOTE: If you hear only a short beep, you have not started or stopped your video. Hold the
button for 3 seconds until you hear the long beep.

IMPROTANT NOTE: If both the green and blue LEDs begin flashing while you are flying with your Skyview
HD Quadcopter, this indicates the battery is running low. Land immediately on a level surface.

6.3 Downloading Photos and Videos onto your PC

a. Eject the MicroSD Card from your Skyview HD Quadcopter’s camera
b. Insert the MicroSD Card into a card reader (not included) and insert into your

computer

c. Copy images and videos to your computer like you would with any digital

camera or memory card

NOTE: Images are in JPG format and videos are AVI format

6.4 Mounting your Action Camera onto the Skyview HD Quadcopter

You can mount your GoPro®* camera or action camera (not included) onto the camera
adaptor included, using the various cases or mounts that came with your action camera

a. Connect your action camera to the included adaptor
b. Slide the adaptor with camera onto the quadcopter

c. Use your camera to record as per the manufacturer’s instructions

IMPORTANT NOTE: Damage to your action camera through incorrect use of the Skyview HD Quadcopter is
not covered by warranty. Ensure you are confident with the controls and flight before attaching your camera.
Depending on the weight of the camera attached, battery life per charge may be reduced

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

19

2

FAQS

Q: My Skyview HD Quadcopter didn’t pair with my remote control
A: Check the Skyview is resting on a flat surface, powered on with LED lights flashing

slowly, then turn the remote control off and on again

Q: My Skyview HD Quadcopter is not responding
A: Check that the battery in the Skyview HD Quadcopter is still charged. Also check

that the remote control batteries are still charged

Q: My Skyview HD Quadcopter is slow to respond
A: Ensure that the remote control batteries are still charged. There may also be

interference from a similar frequency nearby. Try using the Skyview HD Quadcopter in
a different location, away from other radio controlled devices

Q: How do I view the videos recorded on my Skyview HD Quadcopter?
A: Eject the MicroSD card from the camera and insert into a MicroSD card reader to

view on your computer

Q: Why are the green and blue LEDs flashing while I am flying my Skyview HD

Quadcopter?

A: The lights flashing indicates your Skyview HD Quadcopter battery is running low.

Land immediately on a level surface

Q: Where can I buy spare parts such as additional batteries for my Skyview HD

Quadcopter?

A: You can purchase spare parts on our online store.

Visit us at https://cocoonproducts.com.au

After Sales Support

1300 663 907

[e-mail]

Model Number

HE17064

20

DISPOSAL

At the end of its working life, do not throw this product out with your household rubbish.
Electrical and electronic products contain substances that can have a detrimental effect
on the environment and human health if disposed of inappropriately

Observe any local regulations regarding the disposal of electrical consumer goods and
dispose of it appropriately for recycling. Contact your local authorities for advice on
recycling facilities in your area. Observe and local regulations regarding the disposal
of waste products. Contact your local authorities for advise on recycling facilities in
your area

Please keep the original packaging carton and materials in a safe place. It will help to
prevent any damage if the product needs to be transported in the future. In the event
it is to be disposed of, please recycle all packaging material where possible. If you
require another copy of this instruction manual, please contact
[e-mail] to obtain an electronic copy

MAINTENANCE AND STORAGE

The maintenance of drone should be conducted by skilled person only. Always unplug
the battery before doing maintenance. Please follow below safety/deterioration checks
during maintenance:

• Check the conditions of Drone Body, Propeller Guards, Landing Gear and Propellers

to ensure they are intact

• Check the condition of Battery to ensure it is intact

• Check conditions of all screws to ensure they are screwed tight

• Check conditions of the wiring to ensure nothing is pinched of damaged

The drone does not require scheduled cleaning. Should cleaning be necessary, simply
wipe the outside surface with a dry soft cloth.

Always store your device in a clean dry environment and avoid storage in extreme heat
or cold.

SKYVIEW HD QUADCOPTER

REPAIR AND REFURBISHED GOODS OR

PARTS NOTICE

.

Repair and Refurbished Goods

or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such asles
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or les stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.

We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on1300 663 907 or write to us at:

Winplus Australasia

PO Box 537 Bayswater Business Centre, Victoria, Australia

1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST

[e-mail]

AFTER SALES SUPPORT

AUS

MODEL: HE170642 PRODUCT CODE: 64115 12/2018

[e-mail]1300 663 907

1

YEAR WARRANTY