Coby Electronics MPCD-455 Owners manual

Instruction Manual

Portable MP3/CD Player with AM/FM Radio

MP-CD455

- 2 -

For Customer Use:

Enter below the serial number that is located on the
bottom of the unit. Retain this information for future
reference.

Model No. MP-CD455

Serial No.

CAUTION

RISK OF E LECTRI C SHOCK

DO NOT OPEN

CAUTION : TO R EDUCE THE RISK OF FIRE AND ELEC­TRIC SHOC K, D O NOT REMOV E THE COVE R (OR BACK)
OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED
SERVIC E PERSON NEL.

The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufcient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to aler t the user to the pres­ence of important operation and servicing instructions in the literature accompanying the

applianc e.

WARNING:

To prevent re or sh ock hazard, do not exp ose this d evice to ra in or moist ure.

WARNING:

Handlin g the cords on this pr oduct will expose you to lead, a che mical known to the S tate of California t o cause cancer, and

birth defects o r other reproductive harm. Wa sh hands a fter handlin g.

CAUTION :

To prevent electric shock, match w ide blade o f plug to wid e slot of outlet and full y inser t.

CL A SS 1

LA S ER PR O DU C T

SAFETY INSTRUCTIONS

For recycling or disposal information about this product, please contact your local authorities or the Electron­ics Industries Alliance: w ww.eiae.org.

This unit incorporates a safet y interlock mechanism that switches the laser beam on and off. When the disc
holder is open, the laser beam stops automatic ally. Do not attempt to defeat the safety interlock .

- 3 -

SAFETY INSTRUCTIONS (Cont.)

1. Read these instructions c arefully. Keep these instructions for future reference.

2. Heed all warnings and follow all instruc tions.

3. Do not expose to water or moisture.

4. Clean only with a dr y cloth.

5. Keep objects away from ventilation openings. Do not block ventilation openings at any time.

6. Do not install near any apparatus that produc es heat such as stoves, radiators, ampliers, etc.

7. Do not force the power plug into a wall outlet. If the plug provided does not t into your outlet, consult an
electr ician for replacement of the obsolete outlet. (A polarized plug has two blades where one is wider than
the other; the wide blade is provided for your safety.)

8. Do not place heavy objects on the power cord. Protect the cord from being walked on, pinched by objects,
or torn and exposed to liquids (especially at plugs, convenience receptacles, and the point at which they

exit from the device).

9. Use only with attachments/accessories specied by the manufacturer. Use of attachments/ac cessories
not recommended by the product manufacturer may be hazardous.

10. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the device.
If a cart is used, use c aution when moving the cart /device combination to avoid injury from tip over.

11. Unplug the unit during lightning storms. Unplug the device and remove any batteries when the device will

be unused for long periods of time.

12. Do not use headphones/earphones at high volume.

13. Do not open or attempt to repair this device. Refer all repairs to authorized service personnel.

Positioning the Unit:

The ventilation openings should not be impeded by covering them with items such as newspapers, table
cloths, curtains, etc. Do not stand the unit on a thick pile carpet or otherwise install it in a plac e with
inadequate air ow.

Do not use the unit in excessively hot, cold, dusty, damp, or humid locations.

Condensation may form inside the CD player if the unit is left anywhere warm and damp, or if you move
the unit from a cold location to a warm room. In this case, let the unit stand for 1 to 2 hours or gradually
increase the room temperature so that the unit will be dry before use.

Place the unit on a at, even surface.

Do not plac e the unit where it is subject to vibration.

•

•

•

•

•