Coby Electronics DVD-404 Owners manual

COBY DVD404 (DVD202+ CSP62)

IMPORTANT PLEASE READ!

COMMON TROUBLESHOOTING ISSUES

ISSUE #1 NO PICTURE

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box,
contact your cable provider or the cable manufacture. Once your TV is turned to the correct video line, you
should see the “COBY” logo.

ISSUE #2 NO SOUND

There is a three-prong cord (Yellow, Red and White), Connect ONLY the Yellow prong from the DVD player
into your TV. If you do not have a Yellow video connection on your TV, you will need to purchase an RF
Modulator and a four-foot coaxial wire.
Connect the Red and White wire from the DVD player, audio L & R to the subwoofer INPUT.
Connect the two small speakers to the subwoofer OUPUT.
You should have a white/blue wire left over, not needed. This white/blue wire is used when connecting the
speakers system into a 3.5mm jack (Computer, Portable CD player).

ISSUE #3 HAD A COLOR PICTURE, NOW RECEIVING A BLACK AND WHITE ROLLING
SCREEN

The DVD has been set to the incorrect broadcast system. Press the P/N button on the remote to select the
correct broadcast system. NTSC is for the United States TV system.

ISSUE #4 PICTURE FADES FROM DARK TO LIGHT

You cannot connect the DVD player through your VCR, TV/VCR combo, Cable or Satellite.
If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF
Modulator and a four-foot coaxial cable at your local electronics store.

If you are still having difficulty setting up your new DVD player, please contact Customer
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and
Sunday 9:00 AM – 11:00 PM EST. You can also reach us online at

[e-mail]

or [e-mail]

1-800-681-2629 OR 718-416-3197