COBY TF-DVD5050 User Manual

Important Safety Instruction
Safety Precautions
Table of Contents
RR
1.000SCALE
TF-DVD5050
Please read this manual before connection and use.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Please study this manual carefully and always keep it available. There are, however, some installa-
tion and operation precautions which you should be aware of.
(1). Read these instructions.
(2). Keep these instructions.
(3). Heed all warnings.
(4). Follow all instructions.
(5). Do not use this apparatus near water.
(6). Clean only with dry cloth.
(7). Do not block any ventilation openings-Maintain well ventilated conditions around the product. Do not put
product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer's
instructions.
(8). Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
(9). Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
(10). Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus. Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
(11). Only use attachments or accessories specified by the manufacturer. Do not use attachments not
recommended by the product manufacturer as they may cause hazards.
(12). Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
(13). Unplug this apparatus during lightning storms or when unused for long periods of time. Unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due
to lightning and power line surges.
(14). Power sources-this product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer
or local power company. For products intended to operate from battery power, or other sources, refer
to the operating instructions.
(15). Overloading-do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: SHOCK HAZARD-DO NOT OPEN AVIS: RISOUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
accompanying the product.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Dangerous high voltage is present inside the enclosure. Do not open the cabinet.
CAUTION: To prevent electric shock, match wide blade plug to wide slot, and fully insert.
CAUTION: This Digital Video Disc Player employs a laser System. To prevent direct exposure to the
laser beam, do not try to open the enclosure. When open and the interlocks are defeated,
visible laser radiation is present.
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure. DO NOT STARE INTO BEAM.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant with
the FCC Rules,Part 15. These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instruction may cause harmful interference to radio communication.
IMPORTANT SAFETY INSTRUCTIONS Page SAFETY INFORMATION TABLE OF CONTENTS
UNPACKING.............................................................................................................................................................1
NOTE ON DISC........................................................................................................................................................2
VIEWS OF THE MAIN UNIT...................................................................................................................................3-4
VIEWS OF THE REMOTE CONTROL.....................................................................................................................5
CONNECTIONS(Connecting to a TV)......................................................................................................................6
CONNECTIONS(Connecting to an amplifier ...........................................................................................................6
equipped with a Dolby Pro Logic Surround)
CONNECTIONS(Connecting to a HeadphonePower ..........................................................................................................7
Connections (to AC Adapter)Power Connections (to DC Car Cord)
CONNECTIONS(Power Connections to Battery Pack).........................................................................................................8
FUNCTION BUTTONS...........................................................................................................................................9-14
SETUP MENU.......................................................................................................................................................15-17
CUSTOM SETUP....................................................................................................................................................17
TROUBLE SHOOTING...........................................................................................................................................18
SPECIFICATIONS...................................................................................................................................................19
Unpacking
Note on Disc
Views of the Main Unit
Views of the Main Unit
Please make sure the following items are included with your DVD player. If any items are missing, contact your dealer.
Main Unit
1.000SCALE
N/P
Mute
Clear
Step
TF-DVD5050
Remote Control
Battery
DC Car Cord
AC/DC Adapter Power Cord
RCA Cable Headphones
Disc Requirement
The DVD player can play back the following discs.
Disc mark Contents Disc size Maximum playback time
DVD video discs
CD
MP3
Audio+Video (moving picture)
Audio
Audio
12cm
12cm/8cm
12cm 600min
JPEG Still high resolution 600min
In addition, this unit can play back a CD-R, or CD-RW that contains audio titles or MP3 files.You cannot playback discs
other than those listed above.(CD-ROM, CD-Extra, CD-G, and CD-l discs can not be played on this DVD player.)
133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL)
484 min (DS-DL)
74min/20min
Care of Disc
Video disc contains high-density compressed data that needs proper handling.
Hold the disc with fingers. Hold the disc's outer edge and/or the center spindle hole. Do not touch the disc surface.
Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources.
Store discs in cabinet vertically, and in dry condition. Prevent exposure to : Direct sunlight Heat or exhaust from a heating device. Extreme humidity.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently and radically from center toward the outer edge.Do not apply thinner, alcohol , chemical solvent, or sprays when cleaning. Such cleaning fluids will permanently damage the disc surface.
Left /Top/Right View
Left View Top View Right View
Battery
Hold Switch
Power Switch
Headphone Jack
Door
Power ON Indicator
Speaker Speaker
Play/Pause
Stop
LCD On/Off
Enter/ Cursor Button
ENTER
Open Switch
Up
NEXT/F.F/LEF
PREV/F.B/RIGHT
Mode Button
Display
Remote Sensor
Battery LED indicator
DC IN Jack
Video Out
Audio Out
Coaxial Out
Headphone Jack
Volume Control
Video Out -- Connect to external TV screen by the supplied RCA cables. Audio Out -- Connect to external speaker system by the supplied RCA cables Coaxial Out -- Connect to external speaker system by the coaxial cable (not supplied). Headphone Jack -- connect to the supplied headphone. As the headphone is plugged in, the speakers' output
will be OFF.
Volume Control -- Adjust to the desired volume level.
MODE
Press MODE button once to enter setup menu. Refer to "setup menu" section for detail. Press it twice, below picture appears :
Press the left/right direction button to adjust contrast ratio.
Press it the third time, below picture appears :
Press the left/right direction button to adjust Brightness
Press it for the fourth time, below picture appears :
Press the left/right direction button to adjust color saturation
LCD On/Off
Press to turn on/off the LCD display
Speaker
Hold Switch
Prevent any unwanted function changes in PLAY or STOP mode
Remote Sensor
Receiving remote control signal for operation.
Display
Present high-resolution pictures.
DC 9V IN
Connect to the supplied AC Adapter/DC Car Cord for power supply.
Battery LED Indicator
It lights red when charging the battery. It lights green when the battery is fully charged.
Two speakers produce stereo sound.
Power Switch
Press to turn on/off the unit.
Bottom View
Stand Lock
Retracktable Stand
Using Stand
a) Lift up the stand from its groove. b) Erect the unit by supporting it against the stand. c) A slopewise viewing position is realized.
1.000SCALE
(a) (b) (c)
1.000SCALE
1.000SCALE
Stand is such a retractable support that you can get different extent of deviation by adjusting it.
a) Push the lock button upward to release the stand. b) Draw the stand out and then fix it in position by cliking down the lock button. c) Stand up the unit .
LOCK UNLOCK
1.000SCALE
0
0
0
.
E
1
L
A C
1.000SCALE
1.000SCALE
(a) (b) (c)
S
0 0 E
0 . L
1 A C S
.1. .2.
.3. .4.
Loading...
+ 4 hidden pages