Coby DVD-228 RELEASE NOTE

COBY DVD228

IMPORTANT PLEASE READ!

COMMON TROUBLESHOOTING ISSUES

ISSUE #1 NO PICTURE

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box,
contact your cable provider or the cable manufacture. Once your TV is turned to the correct video line, you
should see the “COBY” logo.

ISSUE #2 ROLLING, COLORLESS SCREEN

The DVD has been set to the incorrect broadcast system. NTSC is for the United States TV broadcast
system. On the remote, press the N/P button 2-3 times (m

to

select the correct broadcast system.

ISSUE #3 NO SOUND

Make sure the Red and White wire is connected into the L & R.
Make sure the Red and White wire is connected into your TV “AUDIO IN”.

ISSUE #4 PICTURE FADES DARK TO LIGHT

You cannot connect the DVD through your VCR or TV/VCR combo.
If you cannot connect the DVD player directly into your TV then you will need to purchase an RF Modulator
and a four-foot coaxial wire at your local electronics store.

ISSUE #5 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN

The DVD player may be set to Progressive Scan Mode. You will need to change the DVD player back to the
Video Mode by using the remote control. Point the remote control directly at the DVD player, and then press
the VIDEO/PSCAN button 2-3 times (make sure you do not have a disk in the tray).

If you are still having difficulty setting up your new DVD player, please contact Customer
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and
Sunday 9:00 AM – 5:30 PM EST. You can also reach us online at

[e-mail]

ake sure you do not have a disk in the tray)

or [e-mail]

1-800-681-2629 OR 718-416-3197