Cobra Electronics LI5600 Users manual

Nothing Comes Close to a Cobra
®
English
For more information or to
order any of our products,
please visit our website:
www.cobra.com
Making Life Easier and Safer
Owner’s Manual
Nothing Comes Close to a Cobra
®
TWO-WAY RADIO MODEL
LI 5600 DX
Printed in China
Part No. 480-409-P
Version A
Introduction
Staying in touch with your family and friends is convenient and easy when using your microTALK
®
radio. Some of the many uses you will discover include:
Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
Secure your microTALK radio while on the go.
Carrying your microTALK radio with you is easy when using the belt clip.
The belt clip easily attaches to your belt, purse or backpack.
For Assistance in the U.S.A.
In this user’s manual, you should find all the information you need to operate your microTALK radio. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services:
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time, Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo
@cobra.com (e-mail).
For Assistance Outside the U.S.A.
Contact Your Local Dealer
©2008 Cobra Electronics Corporation
6500 W
est Cortland Str
eet
Chicago, Illinois 60707 USA
www.cobra.com
Customer Assistance
Belt Clip
10289_LI5600DX_PH2 8/10/07 11:28 AM Page RC1
29
Product Features
Product Features
Introduction
Introduction
Backlit LCD Display
Assistance
Warranty
Important FCC Licensing Information
This radio operates on General Mobile Radio Service (GMRS) frequencies which require a Federal Communications Commission (FCC) license. See page 27 for licensing and other r
elated information.
Assistance
Warranty
Maximum range may vary and is based on unobstructed line-of-sight communication under ideal conditions.
Features
22 Channels
Seven shared with FRS/GMRS, seven FRS only, eight GMRS only
142 Privacy Codes
(38 CTCSS codes/ 104 DCS codes)
Hands-Free Operation (VOX)
VibrAlert
®
Silent Paging
10 Channel Memory
Signal Strength Meter
Scan Channels, privacy codes, memory
Selectable Hi•Low Power
In GMRS
Backlit LCD Display
Button Lock
Call Alert 10 selectable tones
Speaker/ Microphone/ Charge Jack
Roger Beep Selectable on/off
Battery/ Power Saver
Keystroke Tones Selectable on/off
Auto Squelch
Maximum Range Extender
Belt Clip
1
2
3
4
5
7
6
10
12
13
9
1. Antenna
2. External Speaker/ Microphone/Charge Jack
3. Backlit LCD Display
4. Mode Button
5. Channel Up/Down Button
6. Hi-Lo Power Button
7. Speaker/Microphone
8. On/Off Power Button
9. Lock/Enter Button
10. Volume Up/Down Button
11. Light/Max Range Button
12. Talk Button
13. Call Button
14. Wrist Strap Connector
15. Belt Clip
16. Battery Compartment
17. Battery Door Latch
14
15
16
17
8
11
1
2
3
4
6
8
9
12
1415
17
10
13
1. Signal Strength Meter Icon
2. Call Alert and VibrAlert Icon
3. Lock Icon
4. Keystroke Tones Icon
5. DCS Icon
6. Roger Beep Icon
7. VOX Icon
8. Memory Icon
9. CTCSS Icon
10. Memory Location Number
11. Privacy Code Numbers
12. Receive/Transmit Icon
13. Hi-Low Power Icons
14. Battery Low Indicator
15. Scan Icon
16. Power Saver Icon
17. Channel Numbers
5
7
11
16
Introduction
Limited One-Year Warranty on Radio(s) & Charger
For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra microTALK radios and charger, and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective microTALK radios, chargers, products or component parts upon delivery to the Cobra Factor
y Service department, accompanied by proof of the date of
first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for
warranty service, but the return charges will be at Cobra’s expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may var
y from state to state.
Exclusions: This limited warranty does not apply: 1) To any product damaged by accident; 2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) If the serial number has been altered, defaced, or removed; 4) If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
For Products Purchased Outside the U.S.A.
Please contact your local dealer for warranty information.
90-Day Warranty on Cobra Lithium Ion Rechargeable Battery Packs
For products purchased in the U.S.A. and Canada.
Trademark Acknowledgement
Cobra®, microTALK®, Nothing Comes Close to a Cobra®, VibrAlert
®
and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA.
Warranty
Warranty and Trademark Acknowledgement
Nothing Comes Close to a Cobra
®
10289_LI5600DX_PH2 8/10/07 11:28 AM Page A2
Assistance
Warranty
O
peration
C
ustomer AssistanceWarranty
1
Introduction
Caring for Your microTALK Radio
Your microTALK radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures.
Rechargeable Battery Pack and Desktop Charger
To install or replace battery pack:
1. Remove belt clip by releasing belt clip
latch and sliding clip up.
2. Pull up on the battery door latch to remove
the batter
y compartment cover.
3. Insert lithium ion battery pack. Position
battery pack according to polarity markings.
4. Replace battery compartment cover
and belt clip.
Estimated operation time on full charge: 10 hours.
Rechargeable batter
y packs must be recycled or disposed of properly in compliance with all applicable laws. They may not be thrown in the trash.
Certain states or municipalities require recycling and have established collection programs. Please contact your local waste removal authority for instructions, or return to Cobra
®
for recycling.
Wrap battery packs carefully and mail postage prepaid to: Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707 USA, Attn: Battery Recycling.
Do not put battery packs into fire or expose to high heat. They may explode.
Pull Up Latch
Remove Belt Clip
Insert Battery Pack
Nothing Comes Close to a Cobra
®
10289_LI5600DX_PH2 8/10/07 11:28 AM Page 1
Assistance
Warranty
3
2
Assistance
Warranty
For charging microTALK radio(s) in desktop charger:
1.
Insert radio(s) into desktop charger as shown.
2. Insert round connector of 120-volt adapter
into jack on back of charger.
3. Plug 120-volt adapter into electrical outlet.
If charging light is not
on, check position of radio. Radio should be
upright. The charge indicator light will stay
on as long as the radio
is in the charging well
.
It normally takes about 15 hours to fully recharge battery pack. Battery pack will not be damaged if it stays in the charging well longer than that.
Note: To charge a single radio, you can bypass the desktop charger and simply insert the wall adapter’s round connector directly into the speaker/microphone/charge jack located on the top of the radio.
Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK radio.
Cobra recommends your radio is turned
off while being charged.
Turning on Your microTALK Radio
Press and hold the Power button until you hear a series of audible tones indicating the radio is
on.
Your microTALK radio is now in Standby mode, ready to receive transmissions. The radio is always in
Standby mode, except when the
Talk, Call or Power buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon will blink. Your batteries should be recharged.
Auto Battery Save
Your microTALK radio has a unique circuit designed to extend battery life. If there are no transmissions for 10 seconds, the radio will automatically switch to
Battery Save mode and
the
Power Saver icon will flash in the display.
This will not affect the radio’s ability to receive incoming transmissions.
Communicating with Another Person
1. Press and hold the Talk button.
2. With the microphone about 2 inches
(5 cm) from your mouth, speak in a normal voice.
3. Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while pressing the
Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
Introduction
Using Your Radio
Customer Assistance WarrantyIntroduction
Operation
On/Off Power
Battery Low
Battery Save Mode
Talk Button
Insert Radio(s)
Quick Start
1. Press and hold the Power button
to turn
on your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the same channel/privacy code to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
2 Inches (5 cm) from Mouth
Nothing Comes Close to a Cobra
®
10289_LI5600DX_PH2 8/10/07 11:28 AM Page 2
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Customer Assistance WarrantyIntroduction
5
Operation
4
Using Your Radio
Channels
With the radio on, select any of the 22 channels by pressing the
Channel Up
or Channel Down button.
Both radios must be tuned to the same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only
.
Channels 15 through 22 are GMRS only.
See page 25 for FRS/GMRS frequency allocations and compatibility charts.
Listening for a Response
Release the Talk button to receive incoming transmissions. Your microTALK radio is always in
Standby mode
while the
Talk or
Call buttons are not pressed.
Call Button
To alert another person that you are calling: – Press and release the Call button.
The other person will hear a two second call tone. This tone is used only to establish voice communications.
See page 23 on how to select from 10 available call tone settings.
Operation
Selectable High•Low Power Output
When in close proximity to another party or during favorable conditions, you can switch from
High to Low Power to extend battery life.
This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.
To toggle between high and low power: – Press and release the Hi•Lo button.
When using Channels 1 through 7 and 15 through 22 on high power, the
Hi icon
will be visible on the display. When using those channels on low power
and on Channels 8 through 14, the
Low icon
will be visible on the display.
To Illuminate Display
Press and release the Light/Max Range button to illuminate the display for 10 seconds.
Channel Buttons
C
hannel Number
Listening
Call Button
Hi-Low Button
Hi Power Icon
Low Power Icon
Light/Max Range
Nothing Comes Close to a Cobra
®
10289_LI5600DX_PH2 8/10/07 11:28 AM Page 4
Assistance
Warranty
Customer Assistance WarrantyIntroduction
7
Operation
Speaker/Microphone/Charge Jack
Your microTALK radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter.
To attach a speaker/microphone:
1.
Open the speaker/microphone/charge tab on top of your microT
ALK radio.
2. Insert the plug into the speaker/
microphone/charge jack.
To connect a wall charger/adapter:
1.
Open the speaker/microphone/charge tab on top of your microTALK radio.
2. Insert the wall charger/adapter plug
into the speaker/microphone/charge jack.
Signal Strength Meter
Your microTALK radio has a Signal Strength Meter
that shows the strength of your incoming and outgoing transmissions. The ascending bars next to the signal strength indicate the strength of the signal. The greater the number of bars visible, the stronger the signal. The fewer number of bars visible, the weaker the signal.
microTALK Range
Your range will vary depending on terrain and conditions.
In flat, open country your radio will operate at maximum range.
Buildings and foliage in the path of the signal can reduce the range of the radio.
Dense foliage and hilly terrain will further reduce the range of the radio.
On FRS channels 8 through 14, your radio automatically switches to low power
, which
will limit the range the radio can communicate.
Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.
6
Using Your Radio
Auto Squelch/Maximum Range
Your microTALK radio is equipped with Auto Squelch, which automatically shuts
off weak transmissions and unwanted noise
due to terrain and conditions. This slightly reduces the
Maximum
Range
at which signals can be heard.
You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.
To briefly turn off auto squelch: – Press the Light/Max Range button
for less than five seconds.
If you hear two beeps, you have turned the maximum range extender
on (see below). To turn maximum range extender on: – Press and hold the Light/Max Range button
for at least five seconds until you hear two beeps which indicates the maximum range extender is
on. To turn maximum range extender off: – Press and release the Light/Max Range
button or change channels.
Lock Feature
The Lock feature locks the Channel, Mode, Hi•Lo and Power buttons to prevent accidental operation.
To turn the lock feature on or off: – Press and hold the Lock/Enter button for
two seconds.
A double beep sound is used to confirm your lock
on or off request. When in Lock mode,
the
Lock icon will be displayed.
Operation
Light/Max Range
Lock/Enter Button
Loc
k Mode
Speaker/Microphone/ Charge Jack
Signal Strength
Maximum Range
Reduced Rang
e
Reduced Range
Nothing Comes Close to a Cobra
®
10289_LI5600DX_PH2 8/10/07 11:28 AM Page 6
Loading...
+ 11 hidden pages