Cobra Electronics LI 3900DX User Manual

TWO-WAY RADIO MODEL
LI 3900 DX
Nothing Comes Close to a Cobra
®
Owner’s Manual
Printed in China
Part No. 480-249-P
English
Introduction
Staying in touch with your family and friends is convenient and easy when using your microTALK
Making Life Easier and Safer
®
radio. Some of the many uses you will discover include:
Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
Belt Clip
Customer Assistance
Secure your microTALK radio while on the go.
Carrying your microTALK®radio with you is easy when using the belt clip.
The belt clip easily attaches to your belt, purse or backpack. Simply squeeze the clip and place it where you prefer.
®
For Assistance in the U.S.A.
In this user’s manual, you should find all the information you need to operate your microTALK assistance after reading this manual, Cobra Electronics offers the following customer assistance services:
®
radio. If you require further
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time, Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo
@cobra.com (e-mail).
For Assistance Outside the U.S.A.
Contact Your Local Dealer
English
A1
©2006 Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 USA
www.cobra.com
Introduction
Antenna
Hi•Low
Power
Button
Button
Max Range
English
A2
Product Features
Talk
Light/
Button
Wrist Strap
Connector
Belt Clip
Battery
Compartment
Battery Door
Latch
External Speaker/ Microphone/ Charge Jack
On/Off
Button
Call
Button
Backlit LCD Display
Channel Up/ Down
Button
Mode Button
Volume
Button
Lock/Enter
Button
Speaker/ Microphone
Introduction
Features
22 Channels
Seven shared with FRS/GMRS, seven FRS only, eight GMRS only
121 Privacy Codes
• (38 CTCSS codes/ 83 DCS codes)
Hands-Free
Operation (VOX)
®
VibrAlert Silent Paging
10 Channel Memory
Signal Strength Meter
Scan Channel, privacy codes, memory
Selectable
Hi•Low Power
In GMRS
Backlit
LCD Display
Button Lock
Call Alert 10 selectable tones
Speaker/
Microphone/ Charge Jack
Roger Beep Selectable on/off
Battery/
Power Saver
Keystroke Tones Selectable on/off
Auto Squelch
Maximum Range
Extender
Belt Clip
English
A3
Product Features
Backlit LCD Display
DCS Icon
Lock Icon
Call Alert and
VibrAlert®Icon
Signal Strength
Meter Icon
Channel Numbers
Powe r
Saver Icon
Privacy Code
Scan
Numbers
Icon
Maximum range may vary and is based on unobstructed line-of-sight communication under ideal conditions.
Important FCC Licensing Information
This radio operates on General Mobile Radio Service (GMRS) frequencies which require a Federal Communications Commission (FCC) license. See page 26 for licensing and other related information.
Keystroke Tones Icon
Roger Beep Icon
Vox Icon
Memory Icon
Memory Location Number
CTCSS Icon
Recieve/ Transmit
Icon Battery Level Indicator
Hi•Low Powe r Icons
Introduction
Operation Customer Assistance Warranty
Caring for Your microTALK®Radio
Your microTALK®radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures.
Remove Belt Clip
Rechargeable Battery Pack and Desktop Charger
To install or replace battery pack:
Remove belt clip by releasing belt clip
1.
Pull Up Latch
Insert Battery Pack
latch and sliding clip up.
2. Pull up on the battery door latch to remove
the battery compartment cover.
3. Insert lithium ion battery pack. Position
battery pack according to polarity markings.
4. Replace battery compartment cover
and belt clip.
Estimated operation time on full charge: 10 hours.
Rechargeable battery packs must be recycled or disposed of properly in compliance with all applicable laws. They may not be thrown in the trash.
Certain states or municipalities require recycling and have established collection programs. Please contact your local waste removal authority for instructions, or return to Cobra for recycling.
Wrap battery packs carefully and mail postage prepaid to: Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707 USA, Attn: Battery Recycling.
Do not put battery packs into fire or expose to high heat. They may explode.
Nothing Comes Close to a Cobra
®
1
Introduction
Insert Radio(s)
Using Your Radio
For charging microTALK®radio(s) in desktop charger:
1.
Insert radio(s) into desktop charger as shown.
2. Insert round connector of 120 volt adapter
into jack on back of charger.
3. Plug 120 volt adapter into electrical outlet.
If charging light is not upright. The charge indicator light will stay is in the charging well and the battery pack is charging. After the battery pack is fully charged, the charge indicator light will turn
It normally takes about 15 hours to fully recharge battery pack. Battery pack will not be damaged if they stay in the charging well longer than that.
on, check position of radio. Radio should be
on as long as the radio
Each port can charge one radio. Uses 120 Volt adapter. Cobra recommends your radio is turned
off while being charged.
The Basics to Get You Started
Your microTALK®radio is easy to use. To get started, simply:
1. Press and hold the Power button to turn on
your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the same channel/privacy code to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
off.
On/Off Power
Battery Low
Battery Save Mode
Talk Button
Two Inches (five cm) from Mouth
Customer Assistance WarrantyIntroduction Operation
Turning on Your microTALK®Radio
To turn on your radio:
Press and hold the Power button until you
hear a series of audible tones indicating the radio is
on.
®
Your microTALK mode, ready to receive transmissions. The radio is always in
radio is now in Standby
Standby mode, except when the
Talk, Call or Power buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon will blink. Your batteries should be recharged.
Auto Battery Save
Your microTALK®radio has a unique circuit designed to extend battery life. If there are no transmissions for 10 seconds, the radio will automatically switch to the
Power Saver icon will flash in the display.
This will not affect the radio’s ability to receive incoming transmissions.
Battery Save mode and
Communicating with Another Person
To talk to another person:
Press and hold the Talk button.
1.
2. With the microphone about two inches
(five cm) from your mouth, speak in a normal voice.
3. Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while pressing the
Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
2
English
Nothing Comes Close to a Cobra
®
3
Operation
Channel Buttons
Channel Number
Listening
Call Button
Using Your Radio
Channels
To select a channel:
With the radio on, select any of the
22 channels by pressing the or Channel Down button.
Both radios must be tuned to the same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.
See page 25 for FRS/GMRS frequency allocations and compatibility charts.
Listening for a Response
When you are finished talking:
Release the Talk button to receive incoming
transmissions. Your microTALK always in
Standby mode while the Talk or
Call buttons are not pressed.
Call Button
To alert another person that you are calling:
Press and release the Call button.
The other person will hear a two second call tone. This tone is used only to establish voice communications.
See page 23 on how to select from 10 available call tone settings.
Channel Up
®
radio is
Operation
Hi•Low Button
Hi Power Icon
Low Power Icon
Selectable High•Low Power Output
When in close proximity to another party or during favorable conditions, you can switch from
High to Low Power to extend battery life.
To toggle between high and low power:
Press and release the Hi•Low button.
When using Channels 1 through 7 and 15 through 22 on high power, the will be visible on the display.
When using those channels on low power and on Channels 8 through 14, the will be visible on the display.
Light/Max Range
Display Illumination
To illuminate your display:
Press and release the Light/Max Range
button to illuminate the display for 10 seconds.
Customer Assistance WarrantyIntroduction
This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.
Hi icon
Low icon
4
English
Nothing Comes Close to a Cobra
®
5
Loading...
+ 13 hidden pages