Cobra Electronics RBTM100, IRAD100 Users manual

Thank you for purchasing Cobra iRadar™,
the world’s first connected radar/laser/red
light camera detector.

Cobra iRadar uses Bluetooth® wireless
technology to connect your iPhone®/iPod
touch® to display radar alerts and change
settings.

Follow these simple steps to get your
Cobra iRadar up and running.

Connecting with Cobra iRadar

Plug in your Cobra iRadar detector unit
using the included cigarette lighter
adapter.

On your iPhone/iPod
touch, enter
the Settings menu.

Quick Start Guide

NOTE: This device complies with part 15 of FCC rules: Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received
including interference that may cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics
Corporation may violate FCC Rules and void authority to operate this
equipment.

Printed in China Part No. 480-667-P Version B

Cobra iRadar is made for:
iPod touch (3rd Generation)
iPhone 3GS
iPhone 3G.

NOTE: *Location-based alerts and GPS
settings available only with iPhone.

Only radar/laser alerts and settings
will work with iPod touch 3rd
generation or higher.

Turn unit on. A red LED will light.

Press General, then
Bluetooth. Make sure
Bluetooth is switched
to ON.

iRadar 100 should
appear under Devices.

Note: Your iPhone/iPod touch
may take 30 seconds to one
minute to recognize the device.

It will initially appear as
“Headset” and will then
turn into iRADAR 100.
If you cannot see the device, try restarting
both iRadar and your iPhone/iPod touch and
re-do steps 1 through 5.

Press iRADAR 100,
then press Pair.

The LED on the detector unit will flash blue.
When pairing has been completed, it will
turn solid blue.

Press Yes to install Cobra
iRadar application from
the App Store. If you
already have the Cobra
iRadar App, you can
press NO.

Now open the App and enjoy using iRadar!

Cobra iRadar App

To download the App manually, enter
the App Store on your iPhone/iPod touch and
search for “Cobra iRadar” and follow the
onscreen instructions.

Dashboard

Display speedometer,
compass and car
battery voltage.

Settings

Configure your Cobra
iRadar settings.

Note: All radar/laser/red light
camera detector settings will
be inactive if you are not
paired with Cobra iRadar or
are out of range.

View Map*

View user-marked locations,
red light camera locations
in your area and GPS-based
speed & direction of travel.

For more information about

AURA™, please visit:
www.cobra.com/AURA.

For more information on iRadar accessories,
go to: www.cobrairadar.com.