Cobra Electronics ESD9201 User Manual

9200.MANUAL 4/3/00 3:03 PM Page 1
How to Use Your Cobra
ESD Radar/Laser Detector
Contents
Introduction..................................................................A1
Safety Alert®/Strobe Alert™ Federal Law Governing Radar Detectors Included Accessories
Controls & Indicators................................................A2
Our Thanks toYou......................................................A3
Customer Support...................................................A3
Features.............................................................................1
Installation.......................................................................2
Quick Start .......................................................................5
LED Displays..................................................................6
Operation..........................................................................9
Turning On....................................................................9
Dim Button.................................................................10
Highway/City Mode.................................................11
Muting Mode.............................................................12
Voice/Tone Settings.................................................13
Memory Set................................................................13
Aux.Audio Jack .........................................................13
Detection........................................................................14
Band Detection.........................................................14
Audible Alarm Indicator.........................................14
Radar.............................................................................15
VG-2 Undetectable..................................................15
VG-2 Audio Al e rt / Sa fe ty Al e rt ® / St ro be Al e rt™........16
Laser Detection.........................................................16
Radar/VG-2/Laser Alerts.........................................17
Facts About Safety Alert®/Strobe Alert™........18
Radar Frequencies....................................................19
Facts About Lidar (Laser).......................................20
Maintenance.................................................................20
Specifications...............................................................21
Limited One Year Warranty...................................22
Optional Accessories................................................23
Order Form....................................................................24
If You Think You Need Service.............Back Cover
Features of This Product
• Safety Alert® Traffic Warning System
• Strobe Alert
• SeparateVisual and Audio Alarms
• Laser Eye 360˚ De te ct i o n
• VG-2 Undete ct a b l e
• Au to and Manual Muting
• 3 Level Dim Bu t to n
• Audio Jack
• Superior Audio Volume
• Adjustable Windshield Mounting Bra c ke t
1
9200.MANUAL 4/3/00 3:03 PM Page 2
Installation
Location Windshield
Location
Selecting the proper location to mount the Cobra ESD-9200 is very important for optimum perfor­mance.Both radar and laser transmissions pass through glass but not through other objects.For this reason the Cobra ESD-9200 lenses must not be blocked.The Laser Eye should have a view of the rear window to take advantage of its 360˚ detection capability.It is best to locate your detector as low on the front windshield as possi­ble.
Examples of metal in the windshield area that can block or weaken incoming radar/laser signals:
1.Windshield wiper blades.
2.Mirrored sun screens.
3.Regular tinted glass does not affect radar reception,although the darker tint at the top of the tinted windshield prevents laser light from penetrating.
4.Heated windshields,currently available as an option for some Ford® (Instaclear) and GM® (Electriclear vehicles act as an impene­trable barrier to radar signals). If in doubt, check with your dealer to see if this applies to your vehicle.
Windshield Mounting
1 2
Attach cups to bracket.
3 4
Attach detector to bracket.
Attach bracket to windshield.
Bend bracket for correct detection angle (if needed). Do not use the ESD-9200 to bend bracket.
Installation
Mounting
5
Plug power cord into detector.
2
6
Plug power cord i nto cigare t te lighte r.
3
9200.MANUAL 4/3/00 3:03 PM Page 4
Installation
Dash Mounting
Note
It will be easy for you to remove and reinstall your Cobra ESD-9200 detector at any time using this hook and loop material on the dashboard.
Remember: Without the means to adjust the angle of the detector (when mounted as above),be sure you that your Cobra ESD-9200 has a level,clear view of the road before you attach the hook and loop material.
Dash Mounting
1 2
Peel protective paper off one side of hook and loop
material.
3 4
Peel top paper off. Place detector on
Place on dash.
hook and loop pad.
Turn On and Adjust Volume
1
Rotate ON-OFF Volume Control to left (away from you). An audible “tone”will indicate the unit is on. PWR LED on front of unit is illuminated.
Quick Start
Turn On and Adjust Volume
Note
For your convenience Display Dim,City/Highway, and Muting mode settings are retained in memory even when the power is unplugged.
5 6
Plug power cord into detector.
4
Plug power cord i nto cigare t te lighte r.
5
9200.MANUAL 4/3/00 3:03 PM Page 6
Quick Start
Set Display Brightness
LED Displays
Note
A three position Dim mode is provided for dusk or night driving (please see Dim Button,page 14 for details).
Set Display Brightness
Select from three levels of LED brightness for your Cobra ESD-9200 display: Normal, Dim and Dark. The ESD-9200’s state-of-the-art LEDs present clear alerts even in sunlight.
1
Press and release Dim button to select normal setting. Press and release Dim button twice to select Dim setting. Press and release Dim button a third time to select Dark setting.
Set Highway/City Mode City
For urban driving–reduces number of X-Band audible alerts.
1
Press and release CITY button.
CITY LED will illuminate orange while in
City mode
Quick Start
Set Highway/ City Mode
Highway
For all other driving.
6
7
9200.MANUAL 4/3/00 3:03 PM Page 8
Quick Start
Set Muting Mode
Set Muting Mode
Auto Muting
Automatically reduces volume of alert in progress after 3 seconds.
Manual Muting
1
Press and release MUTE button to reduce volume of alert in progress.
Turning On Your ESD-9200
1
Plug power cord into detector.
3
Rotate ON-OFF Volume Control to the left (away from you).An audible “tone”will indi­cate the unit is on and the PWR LED on the front of the unit will illuminate orange.
2
Plug power cord i nto cigare t te lighte r.
ON mode
Operation
Turning On Yo u r E S D - 9 2 0 0
To Switch Between Modes
1
Press and release MUTE Button when no signal is being received.
One “beep”= Mute Two“beep”= Auto Mute
8
9
Loading...
+ 10 hidden pages