Cobra Electronics Dual Pro 360 Owner's Manual

Settings

Press and hold the BRT and SEN buttons to access the Menu. To exit the Menu, simply wait a few seconds without pressing a button. The unit will display Completed to conrm your selections.

Press BRT to go from Press VOLUME + or – to change one category to the next your setting within a category

User Mode Advanced* Access and customize all Settings and Preferences Novice Access and customize units and display color, (all other Settings are set to factory defaults) NOTE: Switch back to Advance mode to view all Preferences

Pilot Scan Bar* Scanning Bar with Full Word Full Word Full Word: AutoScan, Auto NoX, or Highway

Display Color Copper/Blue*/Green/Red Set color to match your vehicle’s dash display

Speed Display On* Displays current speed O Displays battery voltage

Speed Mute O / 20-160 mph Oers double beep alert tones below specied speed 20 mph*

Speed Alert O / 20-160 mph Reminds you when you exceed a specied speed 70 mph*

Meter Mode Standard* Single band with bar graph of signal strength Frequency Single band with numeric frequency Threat Multiple bands with bar graph of signal strengths Basic Simple messages replace bands: Caution (if traveling below cruise alert limit) Slow Down (if traveling above cruise alert limit)

Tones Standard* Standard Cobra alert tones Mild Mild doorbell chime alert tones

AutoMute On* / O Automatically reduces audio during alert

AutoLock On* / O Automatically stores and locks out false alarms

Units English*/Metric Units for distance and speed

Language English*/Espanol Language for voice and text

Voice On* / O Voice announcements

GPS Filter On* / O Enables GPS-powered features

7 8

AutoPower O Power turns on or o depending on your vehicle’s ignition type (constant power or switched)

1 Hour Powers o automatically after 1 hour 2 Hours Powers o automatically after 2 hours 4 Hours* Powers o automatically after 4 hours 8 Hour Powers o automatically after 8 hours

NOTE: If AutoPower is on, the display screen goes blank after

30 minutes to save screen life. Display screen will turn on automatically after you reach 10 MPH

Band Enables Default* Default Settings for North America

Modied Customize the bands you want to monitor

Press SEN to go from one Press VOLUME + or – to change band category to the next your setting within a category

X Band On* / O K Band On* / O Ka Band On* / O Ka-POP On / O* Laser On* / O TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms

Marker Enable On* / O Other, Red Light Camera, Red and Speed Camera, and Speed Trap

Modied Customize the types of locations you want to mark for

future reference

Press SEN to go from one Press VOLUME + or – to change marker category to the next your setting within a category

Other On* / O Other location Redlight On* / O Red light camera Red & Speed On* / O Red light & speed camera Speed Cam On* / O Speed camera Speed Trap On* / O Speed trap Air Patrol On / O* Known aircraft patroled areas NOTE: User cannot mark an Air Patrol location

Clear Locations Marked Clear all user Marked locations. Press SEN button to conrm

Lockouts Clear all lockouts. Press SEN button to conrm Defender Clear all DEFENDER data. Press SEN button to conrm Format Clear DEFENDER database, all markers, and all lockouts.

Press SEN button to conrm

*Default Setting

NOTE: AutoPower only works with constant power ignition

SEN - Sensitivity Modes

Press SEN to adjust the X and K band radar detection sensitivity/range. Auto = speed adjusted. The slower you travel, the shorter the X and K band detection range. At 50 mph and above, X and K detection range is at maximum. Ka band detection range is always at maximum, regradless of the SEN setting.

- Auto No X

Auto No X works the same as Auto mode; however, X band is completely turned o.

- Auto Lo K

Auto Lo K works the same as Auto mode; however K band sensitivity is lowered.

- Highway

In this setting, Dual Pro 360 will detect all radar signals on all bands at maximum range.

Meter Mode

Dual Pro 360 oers three settings for displaying alerts:

Standard

The Standard option provides information on a

single radar signal. When Dual Pro 360 detects radar, it displays the band of the radar (X, K and Ka), a bar graph of the front and rear signal strength (front is the left-most bar graph), along with front or rear arrow. When laser is detected, the display will simply read “Laser”. If there are multiple signals present, Dual Pro 360 will determine which one is the most important threat to display.

Band Front Arrow

Front Signal Strength

Rear Arrow

Rear Signal Strength

Frequency mode is the same as Standard but adds frequency information on the displayed radar signal.

Basic

Basic messages replace band and signal strengths.

“Caution” is used when as alert is received while you

are traveling below your current Speed Mute setting (or posted speed limit for current location, when connected to iRadar).

“Slow Down” is displayed when an alert is recived

while you are traveling above thge current Speed Mute setting (or posted speed limit for the current location, when connected to iRadar).

Speed Mute

The Speed Mute feature allows you to modify your

alert tones when traveling below a specied speed (factory default is 20 mph; see Settings and Preferences for details). For all alerts received while traveling below the specied speed, Dual Pro 360 will sound a simple double-beep alert.

GPS Filter/Locking Out False Alerts

Dual Pro 360 is equipped with a TrueLock GPS Filter to lock out and store in its memory false alerts. To lock out a false alert (X band, K band or laser only), press the MUTE button on the detector or the SmartCord three times durring an alert. Pressing the rst time will silence the audio. Pressing a second time will generate a prompt on the display that will read “Lockout?” Press a third time to conrm you want to lock this signal out by location and frequency. A “Stored” message will be displayed. Once a signal has been stored, Dual Pro 360 will reject the signal the next time you approach this area and will display the locked out alert. To unlock a signal that has already been stored, simply press and hold the detector or SmartCord MUTE button while receiving the locked out alert.

The display will read “Unlock?” press and hold the detector or SmartCord MUTE button again to unlock it from memory. The display will then read “Unlocked” to conrm your action. For details on how to turn the GPSlter o, refer to the Settings and Preferences section.

NOTE: When the GPS lter is set to OFF, you do not have access to Dual Pro 360’s other GPS-enabled features (e.g., Database alerts, marking locations, etc).

Speed Alert

With Dual Pro 360, you can set the Speed Alert to notify you when you are traveling over a specied speed (factory default is 70 mph; see Settings and Preference for details). When you travel above the speed threshold you have set, the background display for your current speed will turn red to alert you that you have exceeded the specied speed.

AutoLearn

The AutoLearn feature analyzes (over time) the source of radar signals by location and frequency. This allows Dual Pro 360 to determine if a signal is a real threat or a false one. If it determines that the signal is an automatic door opener, motion sensor, etc., it automatically locks out this source at this particular location. A “Stored” message will appear on the display when a signal has been automatically locked out. If you prefer, you can turn the AutoLearn feature o. See the Settings and Preferences section for details.

NOTE: AutoLearn typically needs to encounter the exact frequency in the same location approximately three times to lock it out. Since some door openers are turned on and o routinely, some variations may occur. When AutoLearn is on, Dual Pro 360 will also unlearn signals to protect you from locking out real threats. If a particular signal is no longer present at a location that was previously locked out, Dual Pro 360 will unlock that signal.

Software Updates

Dual Pro 360’s red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools. In order to have access to these updates, you must register your Dual Pro 360 at www.Cobra.com. Once registered, you will receive email notications that updates are now available for your database or rmware. To handle your software and DEFENDER updates you need to connect your Dual Pro 360 to a computer rst.

You can connect Dual Pro 360 to a computer via

USB/USB Mini B cable.

Restore Factory Settings

To restore Dual Pro 360 to it’s original factory

settings, press and hold MRK and BRT while turning the power on. A Restored message will display, acknowledging the reset.

Notes for Programming

To view serial number and software revision press

MRK and MUTE while powering on detector.

800.964.3138 • Cobra.com

Cobra Electronics Corporation 6500 W. Cortland St., Chicago, IL 60707

Cobra On e Year Limited Wa rranty

What this warranty covers: Cobra USA, Inc. (“Cobra”) warrants your Produc t against all defe cts in material s and workmanship . For how long: One (1) year from the date of original purchase from an authorized Cobra dealer. What we wil l do: If a breach of warranty occur s, Cobra, at its discr etion, will eithe r repair or repla ce your Product fr ee of charge. What we wil l not do: Cobra will n ot pay shipping charg es that you incur for sendi ng your Product to u s. What you mu st do to mai ntain this warranty: Show origina l proof of purchase o r receipt from an au thorized Cobra d ealer. Warranty exclusions: This warrant y does not apply to your produc t under any of the following conditions: 1. The serial number has been removed or m odied . 2. Your produc t has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your product has been modif ied in any way. 4. Your receipt or p roof-o f-purchase is from a no n-authorized de aler or inte rnet auction site, including E-bay, U-bid, or other non-authorized resellers.

5. You are not the original purchaser of the Product from an auth orized dealer or did not receive it as a gif t from the original purchase r of the Produc t from an authoriz ed dealer. To obtain service: 1. Contact Co bra (1-800 -964-3138) to obtain a Ret urn Authoriz ation Num ber. 2. Properly pack your Produc t and include: your name, comp lete return address , written descri ption of the proble m with your Product, day time tele phone number, and a copy of the original proof of purchase or re ceipt. 3. L abel the o utside of the packa ge clearl y with your Return Auth orization Number. Ship the Product pre -paid (insured, for your protection) to: Cobra Electronics Corp., 6500 W. Cortlan d St., Chicago, IL 6 0707. LIMITATION OF WAR RANT Y: The obligations set forth ab ove are Cobra’ sole obligations and your exclusive remedy. Cobra makes no other express warranty. Any implied warranty of merchantability or tness for a partic ular purp ose that may b e applic able to the Product is limited in duration to the duration of this warranty. Some States do not allow limitations on how long an implied warrant y lasts , so the above limitation may not apply to you. Cobra SHALL NOT BE LIAB LE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOU T LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE PRO DUCT. Some St ates do not allow the exclusion or limitation of incidental or consequential damages, so the above limitati on or exclusion may not apply to you . Cobra is not responsi ble for produ cts lost in ship ment betwee n the owner and our se rvice center. Other le gal right s: This warranty gives you specic legal rights, and you may also have oth er rights which v ary from State to Sta te.

FCC NOTE: Mod ications not exp ressly approved by th e manufacturer co uld void the use r’s FCC granted authori ty to operate the eq uipment.

FCC ID: QL4M6. CON TAINS FCC ID:QKLBT2 This devic e complies w ith part 15 of th e FCC rules. Op eration i s subjec t to the followin g two conditions: (1) This device may not c ause harmful inter ference, and (2) this device mu st accept any in terfer ence recei ved includ ing inter ference th at may cause undesired operation.

OWNERS MANUAL

Quick Reference

Take the freedom of the road back with the Cobra

Dual Pro 360, equipped with 360° high denition protection, threat direction arrows, and intelligent GPS technology to eliminate false alerts.

Go to Cobra.com for full featured Owner’s Manual.

Dual Pro 360

features a

new multi-color

OLED display.

Brilliant graphics

illuminate intuitive

icons that identify

the type of threat at

a glance.

• Dual Pro 360’s HD Performance accurately identies real threats sooner than other detectors, and with threat direction arrows, provides you with location information about these threats.

• Updatable IVT Filter™ automatically reduces false alerts from moving In-Vehicle Technology sources such as collision avoidance systems and adaptive cruise control.

• GPS location-based intelligence automatically locks out false alerts and allows you to mark locations for future reference.

• Access to the DEFENDER Database, which warns you of veried speed traps, speed cameras, and red light cameras.

• Built in Bluetooth® technology gives you access

to iRadar.

The real-time ticket-protection network which

warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for overspeed alerts.

Installation

Your new detector comes with our latest EZ Mag Mount™. Simply slide the detector onto the mounting bracket fully and that’s it. To remove the detector from the mount, simply pull the detector o the mount.

Mounting Tips:

• Center of windshield between driver and passenger.

• Ensure clear view of road ahead and sky above.

• Avoid windshield wipers and heavily tinted areas.

To mount the detector in your vehicle:

1 Remove backing from EZ Mag Mount.

2 Firmly press EZ Mag Mount onto windshield and ip locking clamp to secure.

3 Slide the detector onto the mounting bracket until it’s fully engaged. The magnet inside holds the

detector in place.

4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure.

5 To remove detector, simply pull the detector device o the mount bracket.

6 To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount.

EZ Mag Mount Care Instructions:

To clean your EZ Mag Mount, simply rinse under warm water, gently wipe o any debris and allow to air dry.

Attach EZ Mag Mount™ to DualPro 360

Flip Tab Down

DualPro 360

Lock Mount

Flip Tab Up to Lock

Windshield

Mount to Windshield

Connect and Power

To 12V Power Source

Connect detector to your smartphone via Bluetooth®

1 Power on Dual Pro 360.

2 Install and run the Cobra iRadar app on your

smartphone.

Windshield

Note: the rst time you run the app, you will be prompted to register a new account.

3 In the iRadar app. press the Settings button then select “Devices”.

4 Select “Dual Pro 360 ” from the list.

5 Dual Pro 360 will display “Connected” when it

has paired. Press the settins button then Home to return to the Map screen.

Controls & Features Congratulations Dual Pro 360 Features

Using Dual Pro 360 1 Plug small end of SmartCord into modular jack

on Dual Pro 360 and large end of SmartCord into your car’s lighter/accessory socket.

2 Dual Pro 360 should power on automatically. If not, press the device’s power button.

NOTE: You can easily access and customize all of your Settings and Preferences by pressing and holding the MRK and SEN buttons. See Settings and Preferences for details.

Mini USB Jack

Connects to your computer via USB A/mini B cable for downloading software updates

Modular Jack

Connects to SmartCord for powering your device

Earphone Jack

Connects to optional 3.5 mm stereo earphone.

Using SmartCord USB

• Mute Button:

- Press to mute the audio for a specic alert.

- Press three times to lock out a false alert.

- Press twice while receiving a locked-out alert to unlock.

- When connected to iRadar press and hold the mute button on unit or cord to manually report to other users a veried X or K-band alert, or a police ocer observing trac.

• Alert Light: Blinks red when receiving a laser alert.

• Power Light: Lights green when device is

powered on.

• USB Charging Port: Charge smartphones, tablets and other USB-chagred devices.

Modular Connector

Plugs into detector jack

Smartcord USB Adapter

Connects to lighter/accessory socket

Press and hold + or

Volume

– to adjust volume

BRT

Press to adjust display

brightness (Min, Med,

Max, Auto, Dark)

Display

Showing current speed

Display

OverSpeed alert setting that can be adjusted in Preferences. Speed limit data will show here when connected to iRadar

MRK

To mark a location for future alerts, press MRK twice, then VOL + or – to select the type of marker, then MRK again to

conrm. Press twice

while receiving marker

alert to unmark

SEN

Press to adjust detector sensitivity (Highway, AutoScan, Auto NoX)

Power

Press to turn Dual Pro 360 on or o

Mute

Press to mute an alert;

press three times to lock

out a false alert; press twice while receiving a

locked-out alert to unlock

OverSpeed Alert

Bluetooth

Speed Limit Data

HIGH DEFINITION 360° PROTECTION

Continued ➜

7432