Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL60707
IfYou Think You Need Service
For te c h n i cal assistance,please call our Au to m a ted Help Desk which can assist
you by answering the most fre q u e n t ly asked questions about Co b ra prod u ct s.
A Consumer Service Representative can be reached through this same number
Technical assistance is also available on-line in the Frequently Asked Questions (FAQ)
8:00 am - 6:00 pm,Monday through Friday,CST.
section at www.cobra.com or by e-mail to productinfo@cobra.com
If you think you need service call 1.773.889.3087
“If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair.”
You may be asked to send your unit to the Co b ra facto ry.It will be nece s s a ry to furnish the fo l l ow i n g
in order to have the product serviced and returned.
1. For Warranty Repair include some form of proof-of-purchase,such as a mechanical reproduction
or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the unit.Include a typed or clearly print name
and address of where the unit is to be returned.
4. Pack unit securely to prevent damage in transit. If possible,use the original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First
Class Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,6500
W.Cortland St., Chicago,IL 60707.
6. If the unit is in warranty,upon receipt of your unit it will either be repaired or exchanged
depending on the model.Please allow approximately 3 to 4 weeks before contacting us for
status.If the unit is out of warranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions,please call 1.773.889.3087
for assistance.
PR 900 DX. Properly used,this Cobra product
will give you many years of reliable service.
Customer Support
Should you encounter any problems with the
product or not understand its many features,
please refer to this owner’s manual. If,after
referring to the manual, you still need help,
call Cobra Customer Service at 773.889.3087.
Important Safety Information For PR 900 DX
Your wireless handheld portable transceiver contains a radio
frequency transmitter.When the PTT Talk Button is pushed it sends
out RF signals.The device is authorized to operate at a duty factor
not to exceed 50% to comply with Federal Communications
Commissions (FCC) RF exposure safety level guidelines for handheld wireless devices.
To maintain compliance with the FCC’s RF exposure guidelines hold
the transmitter at least 2 inches (5 centimeters) from your face and
speak in a normal voice, with the antenna pointed up and away.If
you wear the transceiver on your body while using a headset or
external microphone accessory,use only the supplied belt clip for
this product and ensure that the antenna is at least 2 inches
(5 centimeters) from your body when transmitting. If the distance
between the antenna and the body is LESS THAN 2.0 INCHES (5 CM)
DO NOTTRANSMIT WITH THIS DEVICE IN THE BODY WORN
CO N F I G U R AT I O N .Un a u t h o ri zed ante n n a s,m od i f i cat i o n s,or at t a c h m e nt s
could damage the tra n s m i t ter and may violate FCC re g u l at i o n s.
Normal Operating Position:Hold the transmitter approximately 2 to
3”from your face and speak in a normal voice,with the antenna
pointed up and away.
CAUTION
Cobra Customer Service
Live operators are available
M-F 8:00 am - 6:00 pm CST at:
773.889.3087
Automated Technical Assistance
available 24 hours a day,seven
days a week.E-mail questions to:
p rod u ct i n fo @ co b ra . co m
Co b ra on the Wo rld Wide We b :
Fre q u e n t ly As ked Questions (FAQ )
can be found on-line at:
www.cobra.com
This device complies
with part 15 of the FCC
rules.Operation is
s u b j e ct to the co n d i t i o n
that this device does
not cause harmful
interference.
A23
A3
General Mobile Radio Service
Contents
Features .........................................................................................................1
FCC Licensing Information
The PR 900 DX radio operates on General Mobile
Radio Service (GMRS) frequencies which require a
Fe d e ral Co m m u n i cation Commission (FCC) lice n s e.
For licensing information and application forms,
please call the FCC Hotline at:
1-800-418-FORM
(You need form #159 and form #605)
If you have any questions regarding the license
application you can contact the FCC direct at
1-888-CALL-FCC.
FCCWarnings
Replacement or substitution of transistors,regular
diodes or other parts of a unique nature,with
parts other than those recommended by Cobra,
may cause a violation of the technical regulations
of part 95 of the FCC Rules,or violation of Type
Acceptance requirements of Part 2 of the Rules.
Included with your microTALK PR 900 DX
1
1 Belt Clip
General Mobile Radio Service.............................................................A1
Order Form...................................................................................................31
If You Think You Need Service............................................Back Cover
How to Use Your Cobra
2 - Way Radio
Features of This Product
• UHF FM Frequencies
• Up to 5 Mile Range
• 15 GMRS Channels
(7 shared FRS Channels)
• 38 CTCSS Privacy Codes
• LCD Function Display
• Auto Squelch
• Lock Key
• Call Fe a t u re
(5 tone settings)
• Belt Clip
• VOX
• SuperFlex™ Antenna
• Programmable/Priority
Scan
• Rechargeable Batteries
Included
• Charger Adapter Included
A1
1
Operation
Operation
Battery
Installation
Note
Rechargeable NiMH
batteries are included with
your PR 900 DX.When not
using your NIMH batteries,
always use high quality
alkaline batteries.
Incorrect positioning can
damage batteries and unit.
Install Batteries
Pull lock tab down
and lift door up
(towards you) to
remove battery
cover.
Insert4“AAA”
batteries.Position
batteries according
to po l a ri ty marki n g s.
Battery Low
When in normal use the () BATT LOW icon
may begin flashing. This is a warning that
batteries are getting low.
Antenna
The radio is equipped
with a SuperFlex™
antenna,which flexes
without breaking and
withstands the demands
of an active lifestyle.
Battery Low
Note
When battery capacity is at
the 1/3 level it is recommended
that you recharge your
rechargeable batteries or
replace your alkaline batteries.
Charge port is located on side
of unit.
Antenna
2
3
Operation
Operation
Turning On
Your microTA L K
PR 900 DX
Note
Wh e n ever the unit is on yo u
can re ce i ve co m m u n i ca t i o n s,
( except while pushing the
P TT Talk Bu t to n ,or while
in Mode Fu n ct i o n ) .
Illuminating
the Display
Turning On Your microTALK PR 900 DX
TURN KNOB
CLOCKWISE
Turnthe Volume Control clockwise to switch
power on.Set volume to desired level.Turn
the Volume Co nt rol co u nte r - c l oc kwise to turn
power off.
Illuminating the Display
PRESS AND
RELEASE
Press and releaseMonitor Button to illuminate
display for ten seconds.
Select Channels (1-15)
Main Channels 1-7 are shared with FRS radios.
PRESS
UP OR DOWN
Turn onyour microTALK PR 900 DX. An audible
“tone”will indicate the unit is on and the LCD
will self-test for 2 seconds and then go to
Operational Mode.
Select channel by pressing and releasing the
ChannelUp or Down Buttons.
Select CTCSS Privacy Code (00-38)
Selecting a CTCSS Privacy Code will enable you
to filter out unwanted conversations and allow
greater privacy.For example,when with a group
of friends,you select channel 7 and privacy
code 1,you will hear your friends and filter out
conversations on channel 7 with privacy codes
2 through 38.
Select
Channels
Note
Units must be on same Main
Channel and CTCSS Privacy
Code to communicate.
Note
Push and hold Channel Up
or Down Buttons for fast
channel/code advance.
Select CTCSS
Privacy Code
Note
If you push and hold the
Mode Button,the LCD
display will cycle through
the different functions.
4
5
Operation
Operation
Select CTCSS
Privacy Code
Note
Press and hold Channel Up or
Down Buttons for fast
channel/code advance.
Select CTCSS Privacy Code continued
PRESS AND
RELEASE
After selecting a Main Channel as instructed on
page 5,press and releaseMode Button.
Smaller numbers and the “CTCSS”icon will flash
next to Main Channel display on LCD.
PRESS
UP OR DOWN
Se l e ct C TCSS Pri va cy Code number by pre s s i n g
and re l e a s i n gt h eChannelUporDownButtons.
PRESS AND
RELEASE
When desired CTCSS Pri va cy Code is displaye d
p ress andrelease PTT Talk Bu t ton or the
Mode Bu t ton to co n f i rm your select i o n .
Your PR 900-2 DX can also display the CTCSS
Pri va cy Code as a fre q u e n cy number rather than
as a p ri va cy code numbe r.Tos e l e ct the fre q u e n cy
n u m be r d i s p l ay option,m a ke sure your PR 900-2
DX is off.While p re s s i n g t h eMode Bu t to n ,
turn on the unit.Use the Channel Up / Dow n
Bu t tons to tog g l e be tween T c Code (pri va cy cod e
n u m ber) and T c FrE9 (pri va cy code fre q u e n cy
n u m be r ) .Pu s h the P TT Talk Bu t ton to co n f i rm
your select i o n .C TCSS Pri va cy Code numbers and
the co rre s ponding fre q u e n cy numbers are liste d
on page 26.
6
7
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.