Cobra MT 525, microTALK MT 525 User Manual

This equiment is intended for use in:

• Countries of use

PT •
SE •

CH •

SI •
SK •
TR •

LI •

LU •

MT •

NL •

NO •

PL •

HU •

IE •
IS •
IT •
LT •

LV •

EE •
ES •

FI •

FR •
GB •
GR •

AT •

BE •
CY •
CZ •
DE •
DK •

ENGLISH

POWER Button

VOLUME CONTROL
Buttons

MODE/LOCK Button

CHANNEL SELECT
Buttons

Speaker/Microphone

Belt Clip

CALL Button

External Speaker/
Microphone Jack

LIGHT/MAX
RANGE Button

Battery
Compartment

Lock Tab

TALK Button

Charge Jack

Antenna

Two-Way Radio Model MT 525

Wrist Strap
Connection Location

PRODUCT FEATURES

English

Features

• Two-Way Radio

with up to a 3 km (2 mile) range

•

8 Channels*

•

38 CTCSS Privacy Codes

• Backlit LCD Display

•

Battery Saver Circuitry

•

Maximum Range Extender

•

Call Alert

• Auto Squelch

• Selectable On/Off "Roger Beep" Confirmation Tone

•

Key Lock

• External Speaker/Microphone Jack

•

Belt Clip

• Wrist Strap

*You are not allowed to use channels 1 and 2 in France.

This situation can change; please contact the French radio licensing authority for
more information.

Main Channel Number

CTCSS Privacy
Code Numbers

Receive/Transmit Icon

Lock Icon

Power Saver Icon Battery Low Icon Roger Beep Icon

Product Information

This microTALK®radio has been manufactured to meet all
required standards for radio equipment using PMR 446
frequencies as authorized. The use of this two-way radio
product involves the public airways and its use may be
subject to local laws or regulations. Contact your radio
licensing authority for more information.

Caring for Your Radio

Your microTALK®radio will give you years of trouble-free
service if cared for properly. Here are a few suggestions:

• Handle the radio gently.

• Keep it away from dust.

• Never put the radio in water or in a damp place.

• Avoid exposure to extreme temperatures.

Battery Installation

To Install or Replace Batteries:

1. Remove belt clip by releasing belt clip latch and
sliding clip Up.

2. Pull down on the BATTERY DOOR LOCK TAB to
remove the battery compartment cover.

3. Insert four (4) AAA batteries. (Always use high-quality alkaline batteries.) Position batteries according to polarity
markings.

4. Replace Battery Compartment cover and belt clip.

NOTE: See “Optional Accessories” for accessory availability and ordering instructions.

Battery Charging

When the optional NiMH battery pack (part No. FA-BP) is used, the
batteries can be charged using the optional rapid wall mount charger
(part No. PA-CW). Simply place the battery pack in the battery
compartment, open the CHARGE TAB on the side of the unit and insert the
plug into the charge jack to start charging. The batteries should be fully charged in about three (3) hours.

WARNING: Only the NiMH battery pack FA-BP can be recharged.
NOTE: See “Optional Accessories” for accessory availability and ordering instructions.

Radio Power

To Turn Your Radio On:

1. Press and hold the POWER button until you hear a series of audible tones indicating
that the radio is On.

Your microTALK

®

radio is now in LISTENING MODE, ready to receive transmissions. The radio is

always in LISTENING MODE, except when the TALK, CALL or MODE/LOCK buttons are pressed.

To Turn Your Radio Off:

1. Press and hold the POWER button.

OPERATION

English

Lock Tab

Power Button

Remove Belt Clip Insert Batteries

Charging BatteriesCharge Tab