Staying in touch with your family and friends is
convenient and easy when using your microTALK
radio. Some of the many uses you will discover include:
Making Life Easier and Safer
®
Communicating with others while hiking, biking, and working;
keeping track of family and friends at a crowded public event;
checking with travel companions in another car; talking with
neighbors; arranging meeting spots with others while
shopping at the mall.
Belt Clip
Secure your microTALK
radio while on the go.
ying your microTALK
Carr
®
®
radio with
you is easy when using the belt clip.
The belt clip easily attaches to your belt,
purse or backpack. Simply squeeze the
clip and place it where you prefer.
Customer Assistance
For Assistance in the U.S.A.
In this user’s manual, you should find all the information you
need to operate your microTALK
®
radio. If you require further
assistance after reading this manual, Cobra Electronics offers
the following customer assistance services:
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. Central Time,
Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo
Seven shared with
FRS/GMRS, seven
FRS only, eight
GMRS only
10 Channels NOAA
•
ALL Hazards Radio
• 121 Privacy Codes
(38 CTCSS codes/
83 DCS codes)
Hands-Free
•
Operation (VOX)
®
• VibrAlert
Silent Paging
• 10 Channel
Memory
• Signal
Strength Meter
• Scan
Channel, privacy
codes, memory
•
Selectable
Hi•Med•Low Power
In GMRS
Backlit
•
LCD Display
• Button Lock
• Call Alert
10 selectable
tones
•
Speaker/
Microphone/
Charge Jack
• Roger Beep
Selectable on/off
Battery/
•
Power Saver
• Keystroke Tones
Selectable on/off
Auto Squelch
•
• Maximum Range
Extender
• Belt Clip
English
A3
Product Features
Backlit LCD Display
DCS Icon
Lock Icon
Call Alert and
VibrAlert®Icon
Signal Strength
Meter Icon
Channel
Numbers
Privacy
Powe r
Saver Icon
Code
Scan
Numbers
Icon
Maximum range may vary and is based on
ucted line-of-sight communication under
unobstr
ideal conditions.
tant FCC Licensing Inf
Impor
This radio operates on General Mobile Radio
Service (GMRS) frequencies which require a
Federal Communications Commission (FCC)
license. See page 27 for licensing and other
related inf
ormation.
Keystroke Tones Icon
Roger Beep Icon
Vox Icon
NOAA All
Hazards
Radio
Memory
Icon
Memory
Location
Number
CTCSS
Icon
Recieve/
Transmit
Icon
Battery Level
Indicator
Hi • Med • Low
Power Icons
ormation
Assistance
Warranty
Introduction
OperationCustomer Assistance Warranty
Caring for Your microTALK®Radio
Your microTALK®radio will give you years of trouble-free service
if cared for properly. Handle the radio gently. Keep the radio away
from dust. Never put the radio in water or in a damp place.
Avoid exposure to extreme temperatures.
Remove Belt Clip
Rechargeable Battery Pack and
Desktop Charger
To install or replace battery pack:
1. Remove belt clip by releasing belt clip
Pull Up Latch
latch and sliding clip up.
2. Pull up on the battery door latch to remove
the battery compartment cover.
3. Insert lithium ion battery pack. Position
Insert Battery Pack
battery pack as shown in radio.
4. Replace battery compartment cover
and belt clip.
Estimated operation time on full charge:
11 hours.
Rechargeable battery packs must be recycled
or disposed of properly in compliance with all
applicable laws. They may not be thrown in
the trash.
Certain states or municipalities require recycling
and have established collection programs. Please
contact your local waste removal authority for
instructions, or return to Cobra for recycling.
Wrap battery packs carefully and mail postage
prepaid to: Cobra Electronics Corporation, 6500
West Cortland Street, Chicago, IL 60707 USA,
Attn: Battery Recycling.
Do not put batter
expose to high heat. They may explode.
y packs into fire or
•
•
Nothing Comes Close to a Cobra
®
1
Assistance
Warranty
Assistance
Warranty
Introduction
Insert Radio(s)
Using Your Radio
For charging microTALK®radio(s) in desktop
charger:
1.
Insert radio(s) into desktop charger as shown.
2. Insert round connector of 120 volt adapter
into jack on back of charger.
3. Plug 120 volt adapter into electrical outlet.
If charging light is not on, check position of radio. Radio should be
upright. The charge indicator light will stay
on as long as the radio
is in the charging well and the battery pack is charging. After the
battery pack is fully charged, the charge indicator light will turn
It normally takes about 15 hours to fully recharge battery pack.
Battery pack will not be damaged if they stay in the charging well
longer than that.
Each port can charge one radio. Uses 120 V
Cobra recommends your radio is turned
olt adapter.
off while being charged.
The Basics to Get You Started
Your microTALK®radio is easy to use.
To get started, simply:
1. Press and hold the Power button to turn
on your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to
the same channel/privacy code
to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
off.
On/Off Power
Battery Low
Battery Save Mode
Talk Button
o Inches (five
w
T
om Mouth
cm) fr
Customer Assistance WarrantyIntroductionOperation
Turning on Your microTALK®Radio
To turn on your radio:
– Press and hold the Power button until you
hear a series of audible tones indicating the
on.
radio is
Your microTALK
mode, ready to receive transmissions. The radio
is always in
Talk, Call, Mode or Power buttons are pressed.
®
radio is now in Standby
Standby mode, except when the
Battery Low
When battery power is low, the Battery Low icon
will blink. Your batteries should be recharged.
Auto Battery Save
Your microTALK®radio has a unique circuit
designed to extend battery life. If there are
no transmissions for 10 seconds, the radio will
automatically switch to
Power Saver icon will flash in the display.
the
Battery Save mode and
This will not affect the radio’s ability to receive
incoming transmissions.
Communicating with Another Person
To talk to another person:
1. Press and hold the Talk button.
2. With the microphone about two inches
(five cm) from your mouth, speak in a
normal voice.
3. Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the Talk button.
Both radios must be tuned to
the same channel/privacy code
to communicate.
•
•
•
•
2
English
Nothing Comes Close to a Cobra
®
3
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Assistance
Warranty
Operation
Channel Buttons
Channel Number
Listening
Call Button
Using Your Radio
Channels
To select a channel:
– With the radio on, select any of the
22 channels by pressing the
or Channel Down button.
Both radios must be tuned to the
same channel to communicate.
Channels 1 through 7 are shared by FRS and
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.
See page 26 for FRS/GMRS frequency
allocations and compatibility charts.
Listening for a Response
When you are finished talking:
– Release the Talk button to receive incoming
transmissions. Your microTALK
Standby mode while the Talk or
always in
Call buttons are not pressed.
Call Button
To alert another person that you are calling:
– Press and release the Call button.
The other person will hear a two second
call tone. This tone is used only to establish
voice communications.
See page 24 on how to select from
10 available call tone settings.
Channel Up
®
radio is
Operation
•
Hi•Low Button
Hi Power Icon
Selectable High•Medium•Low
Power Output
When in close proximity to another party or during
favorable conditions, you can switch from
Medium to Low Power to extend battery life.
Customer Assistance WarrantyIntroduction
•
High to
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
Medium Power Icon
To switch from high to medium to low power:
– Press and release the Hi•Low button.
When in High Power and using Channels 1
through 7 and 15 through 22, the
•
Low Power Icon
visible in the LCD display.
When in Medium Power and using Channels 1
through 7 and 15 through 22, the
Hi icon will be
Med icon will
be visible in the LCD.
When in Low Power or while using channels 8
through 14, the
display.
•
Light/Max Range
Display Illumination
To illuminate your display:
– Press and release the Light/Max Range
button to illuminate the display for
Low icon will be visible in the
•
10 seconds.
4
English
Nothing Comes Close to a Cobra
®
5
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.