Cobra iRadar 900 Quick Start Guide

Model iRAD 900

Quick Start Guide

Printed in China Part No. 480-859-P Version B

Cobra iRadar® ATOM™ uses Bluetooth®
wireless technology to connect to your iOS or Android

™

device. Through this connection, the Cobra iRadar app
displays radar/laser alerts, lets you customize detector
settings, and provides access to the iRadar Community.

Cobra iRadar is made for:
iPod touch (5th Generation)
iPod touch (4th Generation)
iPhone 5
iPhone 4S
iPhone 4

®

Android

NOTE: This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference that may
cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may
violate FCC Rules and void authority to operate this equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes
: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.

smartphones running OS 2.1 or higher

Follow these simple steps to get your iRadar ATOM
up and running:

Mounting iRadar ATOM

iRadar ATOM should be mounted on the windshield or
dashboard of your vehicle. 3 mounting options are included:

Suction Cup Mount –
This is the best option for
portability and moving the detector
from car to car. Make sure to thor­oughly clean the suction cups and
windshield mounting area
to insure a tight seal.

Dual Lock

®

Mount –

This mount is discreet and very solid for
a permanent mounting location. Make
sure the adhesive side of the included
Dual Lock is securely fastened to the
windshield before adding the
weight of the detector to it.

Hook and Loop Fastener–
Included for dashboard mounting.

Dual Lock® is a registered trademark of 3M Corporation.

Suction Cup Mount

®

Dual Lock

Hook & Loop Fastener

Mount

Your detector should be
mounted so that it is oriented
parallel to the road.

The suction cup mount comes
standard bent at a 45° angle
and Dual Lock

®

at 30°. The
metal is designed to bend with­out breaking. Adjust the angle
so when mounted the detector is
level with the road.

Note: Do not attempt to bend
the mount while the detector
is attached.

Incorrect Positions

Windshield

Correct Position

Powering iRadar ATOM

Plug in your iRadar ATOM using the
included cigarette lighter adapter.

Note: the adapter includes a USB
port that can be used to charge your
smartphone or tablet using the manu­facturer’s charging cable.

For more discreet installation, a
hardwire kit is available at

www.cobra.com, part number
RA-PSC B. This can be easily wired

into your fuse box so that iRadar
automatically turns on when your
car is running and does not require
professional installation.

Turn iRadar ATOM on/off by pressing
and holding the Power/Volume
switch on the side of the unit. The
LED on the front of the unit will
shine red.

RA-PSC B

Pairing/Connecting with iRadar ATOM

In order to pair iRadar ATOM to your smartphone, go to the
Bluetooth Settings Menu on your phone/tablet. For most

devices this is found by pressing; Settings

Press Scan for Devices and/or wait for the Device list to
populate and then select iRadar.

Pairing can take up to 30 seconds. If you are prompted to
“Accept password to pair” press Confirm. When iRadar
is properly paired “Connected” will be shown on iOS
products and “Paired but not connected” will be shown
on Android products.

When iRadar is properly paired and connected to your
phone the LED on the front of the unit will shine blue.

For more information on pairing with Bluetooth devices
consult your phone’s owners manual.

If you are having trouble initializing or maintaining your
Bluetooth connection completely turn off your smart­phone and detector device, wait 30 seconds, and then
turn them back on.

Now that you are paired with iRadar you’re ready to start
using the Cobra iRadar app.

u

Bluetooth.

Downloading the App

To download the app you must enter the
iTunes Store or Google Play and search for
“Cobra iRadar”. Follow the onscreen
instructions to download and install the
Cobra iRadar app.

Cobra iRadar App

The iRadar app is what separates Cobra
from any other detectors out there.

Make sure to check out the Tutorial for a
full explanation of app features. The Tuto­rial automatically is displayed the first time
you launch the app and then subsequently
can be accessed from the Menu.

Information on specific settings and
explanations of radar bands can be
found by pressing the buttons in the
settings menus.

iRadar Community

When you, or any other iRadar user, detects a radar or laser
signal the alert information is anonymously sent to Cobra’s
cloud servers. Within seconds, that information is processed
and displayed on your map as part of a Threat Area.

As you approach a specific Threat Area
you will hear a short beep and then the
app will indicate the Cobra’s assess­ment of the reliability of the threat.

High-Threat Area means multiple
reports have confirmed a legitimate
threat in the area recently.

Medium or Low-Threat Area means
signals have been detected but have
either not been confirmed or have not
been reported lately.

Paying attention to threat areas will allow you to be warned
of potential threats before you enter radar detection range.
Community Radar/Laser alert sharing means that you have
an entire network of users working to keep you and your
wallet safe.

Customer Assistance

Should you encounter any problems with this product, or not understand its many
features, please refer to this owner’s manual. If you require further assistance after
reading this manual, Cobra Electronics offers the following customer assistance services:

For Assistance in the U.S.A.

Automated Help Desk:
English only. 24 hours a day, 7 days a week, phone [phone].

Customer Assistance Operators:
English and Spanish. 8:00 a.m. to 5:30 p.m. Central Time, Monday through Friday
(except holidays), phone [phone].

Questions:
English and Spanish. Faxes can be received at 773-622-2269.

Technical Assistance:
English only. www.cobra.com (on-line: Frequently Asked Questions). English and
Spanish. product [e-mail] (e-mail).

For Assistance Outside the USA:

Contact Your Local Dealer

Trademark Acknowledgement

Cobra®, DigiView®, EasySet®, Extra Sensory Detection®, IntelliShield®, LaserEye®, Nothing
Comes Close to a Cobra®, Safety Alert® Traffic Warning System, VG-2 Alert®, Xtreme Range
Superheterodyne® and the snake design are registered trademarks of Cobra Electronics
Corporation, USA.

Cobra Electronics Corporation™, Extreme Bright DataGrafix™, IntelliLink™, iRadar™,
Revolution™ Series, SmartPower™, Spectre Alert™, Super-Xtreme Range Superheterodyne™,
S-XRS™, UltraBright™, and Voice Alert™ are trademarks of Cobra Electronics Corporation, USA.

Instaclear® for Fo rd is a regis tered trademark of Ford Motor Company, Inc. Electriclear® for GM is a
registered trademark of General Motors Corporation. 20-20™ and Ultra-Lyte™ are trademarks of Laser
Technology, Inc. ProLaser™ and ProLaser III™ are trademarks of Kustom Signals, Inc. Bee III™ and
Pop™ are a trademarks of MPH Industries. Stalker™ LIDAR is a trademark of Applied Concepts, Inc.
SpeedLaser™ is a trademark of Laser Atlanta, LLC. Interceptor VG-2™ is a trademark of TechniSonic
Industries LTD.

iPhone® and iPod® touch are trademarks of Apple, Inc, registered with the U.S. and other countries.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such
marks by Cobra Electronics Corporation is under license. Other trademarks and trade names are those
of their respective owners.

Android™ is a trademark of Google, Inc. Use of this trademark is subject to Google permission.

Limited 1-Year Warranty

For Products Purchased in the U.S.A.

Cobra Electronics Corporation warrants that its Cobra iRadar Radar/Laser Detector, and the component
parts thereof, will be free of defects in workmanship and materials for a period of one year from the
date of first consumer purchase. This warranty may be enforced by the first consumer purchaser,
provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective iRadar Radar/Laser Detector,
products or component parts upon delivery to the Cobra Factory Service Department, accompanied by
proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service, but the
return charges will be at Cobra’s expense, if the product is repaired, this warranty gives you specific
rights, and you may also have other rights which vary from state to state.

Exclusions: This limited warranty does not apply:

1. To any product damaged by accident.

2. In the event of misuse or abuse of the product, or as a result of unauthorized alterations or repairs.

3. If the serial number has been altered, defaced or removed.

4. If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose are

limited in duration to the length of this warranty.
Cobra shall not be liable for any incidental, consequential or other damages; including, without

limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitations may not apply
to you.

Product Service

For any questions about operating or installing this new Cobra product, or if parts are missing…PLEASE
CALL COBRA FIRST…do not return this product to the store. See customer assistance on reverse side

of this sheet. If this product should require factory service, please call Cobra before sending the product.
This will ensure the fastest turn-around time on any repair. If Cobra asks that the product be sent to its
factory, the following must be furnished to have the product serviced and returned:

1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction or
carbon of a sales receipt. Make sure the date of purchase and product model number are clearly
readable. If the originals are sent, they cannot be returned;

2. Send the entire product;

3. Enclose a description of what is happening with the product. Include a typed or clearly printed name
and address of where the product is to be returned, with phone number (required for shipment);

4. Pack product securely to prevent damage in transit. If possible, use the original packing material;

5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or Priority
Mail with delivery confirmation to avoid loss in transit to: Cobra Factory Service, Cobra Electronics
Corporation, 6500 West Cortland Street, Chicago, Illinois 60707 U.S.A.;

6. If the product is in warranty, upon receipt of the product it will either be repaired or exchanged
depending on the model. Please allow approximately 3 – 4 weeks before contacting Cobra for status.
If the product is out of warranty, a letter will automatically be sent with information as to the
repair charge or replacement charge.

For any questions, please call 773-889-3087 for assistance.