How it Works
Cobra
Loading...
Intenna CP-2506

Cobra Intenna CP-2506 Operating Instructions Manual

Download
OPERATING INSTRUCTIONS FOR YOUR
C O R D L E S S T E L E P H O N E
The antenna is in the phone,
“
not in your way...and the sound is incredible.
MODEL CP-2506
”
25
CHANNEL
Model
CP-2506
Cordless Telephone
Table of Contents
SUBJECT PAGE
Important Safety Instructions ..............................................................................2, 3
Introduction ................................................................................................................4
Installation Information ............................................................................................5
Quick Set-Up Guide ..................................................................................................6
Wall-Mounting Instructions ......................................................................................7
Using Your Phone ......................................................................................................8
Answering/Placing Calls at the Base ......................................................8
Answering/Placing Calls Away From The Base....................................8
Cordless Phone Operational Features ....................................................................9
Battery Saver Circuitry ..............................................................................9
Channel Selection ........................................................................................9
Compander Noise Reduction....................................................................9
Digital Security ..........................................................................................9
Display Window..........................................................................................9
Flash ............................................................................................................10
Hearing Aid Compatibility......................................................................10
Intenna
Last Number Redial..................................................................................10
Memory Dialing ........................................................................................10
Out-of-Range Signal ..................................................................................11
Page/Find ..................................................................................................11
Power Failure Reset ..................................................................................11
Privacy Feature ..........................................................................................11
Pulse/Tone Switch ....................................................................................11
Ringer Switch ............................................................................................11
Secur-Loc¨..................................................................................................11
Rechargeable Battery Information..........................................................................12
Battery Recharging ....................................................................................12
Replacing the Battery..........................................................................12, 13
Battery Disposal ........................................................................................13
Cleaning The Charging Contacts............................................................................13
About Cordless Phone Performance......................................................................14
Intenna
If You Think You Need Service ..............................................................................16
Registered with the FCC..........................................................................................16
Limited One-Year Warranty....................................................................................17
Cordless Phone Accessories........................................................Inside Back Cover
Cordless Telephone Troubleshooting Guide ..........................................15
System ..........................................................................................10
1
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liq-
uid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not locate base unit near water, for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the bottom or back are provided for
ventilation, to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in the bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indi-
cated on the marking label. If you are not sure of the type of power sup­ply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this prod-
uct where the cord will be abused by persons walking on it.
9. Do not overload outlets and extension cords as this can result in the risk
of fire or electric shock.
10. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product, but
take it to qualified servicemen when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appli­ance is subsequently used.
12. Avoid using telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
2
Important Safety Instructions (continued)
14. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating in-
structions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni-
cian to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance.
The cordless handset operates on batteries, please read and follow instruc-
tions:
A. Use only the battery pack supplied with the unit or identical replace-
ment. B. Do not dispose of battery pack in a fire. The cells may explode. Check
with local codes for possible disposal instruction. C. Since released electrolyte is corrosive and may cause damage to eyes or
skin and may be toxic if swallowed:
C1. Do not open or mutilate battery pack.
C2. Always replace the entire battery pack rather than reusing one or
more cells.
C3. Do not expose batteries to heat or flame. D. Exercise care in handling the battery pack in order not to "short" the
battery contacts with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
15. Never install telephone wiring during a lightning storm.
16. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
17. Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
18. Use caution when installing or modifying telephone lines.
Save These Instructions
3
How To Use Your
Model
CP-2506
Cordless Telephone
U.S. PATENT 4876709 U.S. PATENT 5351284
Introduction
Thank you for your purchase of a Cobra¨
the world’s first and only full-range-power cordless telephone without any external antennas!
No more extending, bending, or breaking the antennas found on traditional cordless phones Ñ your Cobra
the handset and base, where they should be, out of your way.
Now you can install your new Cobra where. Without cumbersome external antennas to worry about, put your new phone anywhere a corded phone can go! Then enjoy the freedom of using your new cordless phone all over the house as well as outside in your yard.
Your new Cobra Model CP-2506 is equipped with Private Callª, which uses voice scrambling to ensure totally private telephone conversations. Your phone has twenty-five selectable channels (the maximum number available) for optimum interference-free use, and 10-number memory dialing. The CP-2506 is also equipped with Battery Saver Circuitry which extends battery life up to 14 days between charges, and its Clear Call® PLUS Circuitry with compander noise-reduction system ensures corded-phone sound quality.
Please take a moment to review this booklet and become familiar with all of the many user-friendly convenience features built into your new Cobra
Intenna
If you need further assistance installing or using your new Telephone, please call our consumer “hotline” at 1-773-889-3087, 8 a.m. to 8 p.m. CST, Monday through Friday (except holidays).
Cordless Phone.
Intenna
Intenna
conceals its antenna systems inside
Intenna
¨ Cordless Telephone Ñ
cordless phone virtually any-
Intenna
Cordless
Note: Some cordless telephones operate at frequencies that may cause inter­ference to nearby TV's and VCR's. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of TV's or VCR's. If interference is experienced, moving the cordless telephone base further away from the TV or VCR will often reduce or eliminate the interfer­ence.
4
*
Installation Information
Maximum range is obtained by installing the base unit in the highest living
area of your home. The location you choose must be near an electrical outlet and a telephone wall jack.
HANDSET
TALK BUTTON
BASE UNIT
CHARGE INDICATOR
CHANNEL BUTTON
ACCESSORIES
PHONE NUMBER DISPLAY WINDOW
AC ADAPTER (1)
TALK & BATTERY LOW INDICATOR
MEM/REDIAL BUTTON
FLASH BUTTON
POWER 9V DC
RINGER ON/OFF SWITCH
PULSE/TONE SWITCH
PHONE (IN USE) INDICATOR
PAGE/FIND BUTTON
5
ON OFF
PULSE TONE
POWER 9VDC
RINGER
Quick Set-Up Guide
The following basic steps enable quick and easy installation of your new Cobra
Intenna
couraged to review this complete instruction manual to become familiar with all of the operating instructions and features of your new phone.
NOTE: Before using, connect your new system to AC power (see instruc­tions below) to charge it overnight (at least 12 hours) for optimum condi­tioning of the rechargeable battery inside the cordless handset.
1 Insert round connector of power adapter into POWER jack (at rear of
cordless phoneÕs base; see diagram #1 below). Plug power adapter into a standard 120 VAC household electrical outlet. Then place handset in base so CHARGE indicator lights (see p. 12).
Cordless Phone for use on a desk or countertop. You are en-
HANDSET
BASE UNIT— REAR VIEW
➂
ON/OFF RINGER SWITCH
4
PULSE/TONE SWITCH
1
DC POWER JACK
Diagram #1
Connecting
power and
telephone
①
2
ELECTRICAL OUTLET
MODULAR PHONE JACK
2 After charging, remove the twist-tie from the phone cord and plug the
modular telephone connector into the phone jack on your wall (see
2
above).
3 Make sure that the RINGER switch is ON (located on base; see p. 11 for
details).
4 Set the PULSE/TONE switch (at the rear of the base) for proper opera-
tion (see page 11 for details).
Note: Make sure you have charged handset in base 12 hours before using.
6
Wall Mounting Instructions
The following steps enable installation on a new or existing telephone wall­mounting plate or directly onto a wall. (Your Cobra
be used with any AT&T, GTE, local phone company or other wall-mounting plates that can be purchased from most local electronics stores.)
¥ Press telephone cord into slots under the base and wrap around cord-
storage area (as shown in diagram #2, below).
¥ Plug modular phone connector into telephone wall jack; attach the pow-
er adapter to the POWER connection (on the base of the phone) and plug into to a household AC power outlet.
¥ Align mounting studs on the plate to the holes on the bottom of the
INTENNA base; push base onto studs and slide down on the wall plate.
Modular Phone Jack
Intenna
is designed to
Cord
Storage Area
Mounting Studs
To install directly on any wall, youÕll need to provide two screws and wall anchors; follow these steps:
¥ Drill two holes 3 1/4Ó apart and insert the wall anchors. ¥ Drive the screws into the anchors until the head of each screw is
protruding about 1/8Ó from the wall.
¥ Align the holes in the cordless base over the screw heads; push base
Diagram #2: In-
stallation on a telephone wall­mounting plate
in and slide down on screws (see diagram #3).
¥ Plug modular phone connector into telephone wall jack; attach the
power adapter to the POWER connection (on the base of the phone; see p. 4) and plug into to a household AC power outlet.
Note: Make sure you have charged the handset at least 12 hours before use.
Screw Heads
Diagram #3:
Installation
directly on a wall
Modular Phone Jack
7
Using Your Phone
After charging the handset batteries overnight (at least 12 hours), your Cobra
¥ To answer a call, just pick up handset from base when the phone rings.
¥ To place a call, pick-up handset from base and press and release the
¥ The TALK indicator must be off (not lit) when the handset is away from
¥ Press and release the TALK but-
¥ Press and release the TALK but-
Intenna
cordless phone will be ready for use.
ANSWERING/PLACING CALLS AT THE BASE
TALK indicator will automatically light. When call is completed, return handset to base without pressing TALK button; your phone automatical­ly disconnects.
TALK button (indicator will light). When you hear the dial tone, place your call.
ANSWERING/PLACING CALLS AWAY FROM THE BASE
the base. The phone is ready to ring if a call is received (RINGER switch must be in ON position).
ton (indicator will light) to answer or place a call.
ton when finished with a call. TALK indicator light will go off and the call will be disconnected.
8
CP-2506.qx 11/12/97 12:35 PM Page 10
Cordless Phone Operational Features
The following features offer state-of-the-art performance and the ultimate in user-friendly convenience with your new Cobra
BATTERY SAVER CIRCUITRY
The handset of this phone may be kept away from the base (TALK indicator OFF) up to 14 days at a time. In this condition, it is ready for you to answer or place calls by pressing and releasing the TALK but­ton. The duration of the battery charge will depend on your actual use of the phone in its remote location.
Note: A warning beep tone will sound and the TALK/BAT indicator will flash when the handset battery needs recharging (see p. 12).
CHANNEL SELECTION
Selectable channels are built into your Cobra
Intenna
If interference begins during a conversation:
¥ Press and release the CHAN button on the
¥ If an alert tone (3 beeps) sounds, channel
for optimum interference-free use.
handset. Your phone will automatically scan and advance to the next clear channel. A con­firmation tone (two double beeps) will sound to indicate a successful channel change.
change was unsuccessful. In that case, move closer to the phone base and press CHAN button again.
Intenna
cordless telephone.
*
COMPANDER NOISE REDUCTION
Your Cobra system to minimize background noise for optimum audio performance. The sound of your phone will be comparable to the performance of a corded phone.
Intenna
has the Cobra Clear Call¨PLUS compander noise-reduction
DIGITAL SECURITY
Your Cobra regulations) to reduce the chance of interference from your neighbors' cordless phones. These inaudible, electronic codes are transmitted automatically by your phone to establish a secure link between your cordless handset and base.
Intenna
features digital security coding (in accordance with FCC
DISPLAY WINDOW
Use the back of the white "25 CHANNEL" card at the top of the dialpad to write your phone number. Use the tip of a paper clip to pry off the protective plastic cover; replace card and cover to secure.
9
*
CP-2506.qx 11/12/97 12:35 PM Page 11
FLASH
This feature briefly interrupts the phone line so that you may access some of the advanced featuresÑ like ÒCall WaitingÓ and ÒThree-Way CallingÓÑ that may be offered at extra cost by your local telephone company. Press and release the FLASH button on the handset to answer a second phone call or place a conference call if you subscribe to these services.
HEARING AID COMPATIBILITY
Your cordless telephone handset is compatible with inductively coupled hearing aids (HAC).
SYSTEM
The revolutionary, patented
Intenna
ceals the handset and base antennas inside the phone and out of the way. No more traditional antennas to extend, bend or break. CobraÕs hidden antennas are perfectly matched to your phoneÕs microprocessor circuitry for optimum perfor­mance offering the ultimate in user-friendly convenience.
is the worldÕs first and only full-range-power cordless telephone that con-
Intenna
hidden-antenna system is a Cobra exclusive.
LAST NUMBER REDIAL
Each time you dial, the phone number youÕre calling is automatically saved in a special MEM/REDIAL memory. To call that number again at a busy signal, press FLASH (without hanging up) to get a new dial tone, then press and release the MEM/REDIAL button twice. If you wish to try the call in a few minutes, use TALK to access the dial tone, then press and release the MEM/REDIAL button twice. The number will automatically be redialed.
*
*
MEMORY DIALING (STORAGE)
Your Cobra dialed phone numbers or emergency numbers. With the TALK button off, press and release the MEM/REDIAL button once; enter the digits of the phone number you wish to store, up to 16 digits; press and release the MEM/REDI­AL button again. Now assign your memory number a position by entering any keypad number from 0 to 9. You will hear a confirmation beep. NOTE: for automated banking or alternate long distance service, you may need to pro­gram a number which is longer than 16 digits. You will need to divide the number between two memory locations. Follow the steps above.
Intenna
cordless phone enables you to store up to 10 frequently
MEMORY DIALING (RECALL)
To call a number stored in memory, press TALK to get a dial tone; press MEM/REDIAL button once. Press the keypad number you assigned to that number and your phone will automatically dial the number. NOTE: for longer numbers which you have stored in two different locations, follow steps above, pressing MEM/REDIAL button again before entering the second number. Use the memory sticker card provided to write down the names of each memory position. Keep this in any covenient place.
10
CP-2506.qx 11/12/97 12:35 PM Page 12
OUT-OF-RANGE SIGNAL
If three beeps are heard immediately after the TALK button is pressed, the handset is too far away from the base. The handset and TALK indicator will automatically turn off. Move closer to the base and then try your call again.
PAGE/FIND
The person using the handset away from the base, such as in the yard, can be signalled (paged) by someone at the base. To page someone at the handset location, press the PAGE/FIND button for one second and the handset will beep. To find a misplaced handset around your home, press PAGE/FIND for at least 5 sec­onds; the handset will then beep for 30 seconds, giving you time to locate the handset. When handset is found, press TALK to eliminate PAGE signal.
POWER FAILURE RESET
After a power failure in your home (or any time you unplug your phone from AC power and then reconnect it), you must return the cordless handset to the base for about thirty seconds. This automatically matches the digital security codes.
PRIVATE CALL™ SYSTEM
This feature is automatically activated whenever you use your phone. Built­in voice scrambling allows complete calling privacy by scrambling the signals between the handset and the base and between the base and the handset, mak­ing it unlikely that an outside source such as another cordless phone, scanner or baby monitor to pick up a conversation from your phone. This ensures that you will always have totally private telephone conversations.
PULSE/TONE SWITCH
Your Cobra phone system because it is switchable from pulse to tone dialing (see switch on back of the base) depending on which service you are using. Mixed PULSE and TONE dialing may be used (to access certain long-distance or computerized banking services, for example) by selecting PULSE with the base switch and then using the button on the handset to temporarily switch to TONE dialing. Hanging up resets to PULSE.
Intenna
cordless phone can be used with any
PULSE TONE
✱
RINGER SWITCH
The OFF/ON switch (located on back of the base) con­trols your cordless handsetÕs electronic ringer; no ring will sound in the OFF position.
SECUR-LOC
This exclusive Cobra electronic circuitry is an added security measure to protect your phone line from being accidentally accessed by a neighbor's cordless phone. Secur-Loc activates automatically every time your cordless handset is placed into its base.
®
11
OFF ON
RINGER
CP-2506.qx 11/12/97 12:35 PM Page 13
Rechargeable Battery Information
NOTE: Before using your new Cobra first time, you must charge the battery overnight (at least 12 hours) for optimum long-life conditioning of the nickel-cadmium rechargeable handset battery.
Intenna
cordless telephone for the
BATTERY RECHARGING
When your cordless handset battery needs recharging, the following alerts will remind you to immediately return the handset to the base for recharg­ing (this normally requires at least 12 hours of continuous charging):
1. The TALK/BAT indicator on the
handset will flash.
2. A warning (2 beeps) will sound
while you are using the phone. This indicates you have only a few minutes of battery power re­maining to complete your conver­sation before the phone discon­nects.
3. When handset has been away
from the base and needs recharg­ing, it will beep at 30 second inter­vals for five minutes. After this time, the handset will seem "dead". It will not flash or beep, nor will you be able to get a dial tone. Return handset to base for recharging.
NOTE: The CHARGE indicator will remain on as long as the handset is in the base, even after the batteries are fully recharged. The batteries will not be
damaged if the handset remains in the base continuously; the charging system
is self-adjusting and will never over­charge the batteries.
BBEEEEPP
BBEEEEPP
*
REPLACING THE BATTERY
The rechargeable NiCad battery in your cordless phone may need to be re­placed if the handset will not function when the TALK button is pressed after recharging for 12 hours.
Replacement batteries are available direct from Cobra (see accessories order form at the end of this booklet or call 1-773-889-3087).
12
CP-2506.qx 11/12/97 12:35 PM Page 14
REPLACING THE BATTERY (continued)
1. Remove phone number display
window and card. Remove screw in center of recessed area.
2. Use a coin in the slot at the top to
carefully pry open front from back of handset. Carefully take off back of handset.
3. Unplug the connector cord and
properly discard old batteries (See BATTERY DISPOSAL below). Position and connect new battery.
4. Put back and front together so that
hooks at bottom engage. Then apply pressure to both sections to reassemble. Replace screw in center of phone number section. Return card and window to area. Put hand­set in charging well and allow bat-
BATTERY DISPOSAL
teries to charge 12 hours.
The rechargeable nickel cadmium (NiCad) battery in this product must be recycled or disposed of properly in compliance with all applicable laws. Certain states or municipalities require recycling and have established collec­tion programs. Please contact your local waste removal authority for instruc­tions, or return to Cobra for recycling. Wrap batteries carefully and mail postage prepaid to:
Cobra Electronics Corporation
RBRC
6500 W. Cortland Street
Chicago, IL 60707
RBRC
Attn: Battery Recycling
DO NOT PUT BATTERIES INTO FIRE OR EXPOSE TO HIGH HEAT. THEY MAY EXPLODE.
"Contains Nickel-Cadmium
Must be recycled or dis-
Ni-Cd
Rechargeable Battery.
posed of properly."
CLEANING THE CHARGING CONTACTS
Clean the two metal charging contacts on the base and handset with a soft, dry cloth on a regular basis to ensure optimum performance of the battery­charging system.
13
CP-2506.qx 11/12/97 12:35 PM Page 15
About Cordless Phone Performance
Your Cobra between the base and handset. It is thus subject to occasional interferenceÑ static or buzzing noises, for example. These conditions may be caused by electrical motors on household appliances, fluorescent lights, electrical storms and other sources.
These steps will enhance the maximum performance of your new phone:
• Change channels by pressing the CHAN button on the handset if
• Don't cover the upper section of the cordless handset with your
• Avoid resting the handset on your shoulder during conversations;
• Don't plug your phone's power cord into an active AC outlet that
Intenna
you experience interference.
hand (see diagram below). This may block the internal antenna locat-
ed at the top of the handset, possibly reducing the phone's range and audio clarity. Always hold the handset at the middle or close to the bottom.
INCORRECT CORRECT
this may also block the performance of the internal antenna.
also provides power for a major appliance or for charging units for cordless appliances (vacuums, screwdrivers, etc.) or other electronic devices.
cordless phone uses radio transmission to communicate
Hold the
cordless handset at the
middle or bottom area
of your phone for
best performance.
14
CP-2506.qx 11/12/97 12:35 PM Page 16
Cordless Telephone
Troubleshooting Guide
If your cordless phone does not seem to operate properly, please check the following and refer to the appropriate sections in this booklet for detailed in­formation:
¥ The phone is dead; no indicator lights are on: Are the power cord
and telephone cord connected?
¥ Handset beeps during conversations or when away from the base:
The batteries need recharging; return the handset to the base for overnight recharging.
¥ Hearing poor audio or added interference during calls: DonÕt
cover the top section of the handset with your hand or rest the phone on your shoulder. This blocks the special internal Cobra
Intenna
¥ Handset disconnects, loses performance and/or beeps three times
when in use away from the base: You may be out of range or your
batteries may need recharging. Move closer to the base and/or re­charge batteries.
handset antenna.
¥ Unable to make a call due to interference: Select a new channel. ¥ Handset won’t work after a power outage or after disconnecting
phone from AC power and then reconnecting it: Return the hand­set to the base for about thirty seconds to automatically match the security coding.
¥ Handset seems "dead.": Battery power has run out; return handset
to base and charge for at least 12 hours. If handset still seems "dead", unplug the handset battery for 15 seconds and plug back in. Then place the handset back on the base for at least 5 minutes.
¥ Memory dialing does not work: AC power has been disconnected;
you must re-enter your memory dialing numbers (see p. 10)
15
CP-2506.qx 11/12/97 12:35 PM Page 17
For technical assistance, please call our Automated Help Desk which can assist you
by answering the most frequently asked questions about Cobra products.
(773) 889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through
this same number 8:00 am - 8:00 pm, Monday through Friday, CST.
Technical assistance is also available on-line in the Frequently Asked Question
(FAQ) section at www.cobraelec.com or by e-mail to productinfo@cobraelec.com
If You Think You Need Service, Call 1-773-889-3087
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following, in order to have the product serviced and returned.
1. For Warranty Repair, include some form of proof-of-purchase, such as a me-
chanical reproduction or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product. Must include base, handset cords and power adapter
furnished with the product.
3. Enclose a description of what is happening with the unit. Include a typed or
clearly printed name and address of where the unit is to be returned.
4. Pack unit securely to prevent damage in transit. If possible, use the original
packing material.
5. Ship prepaid and insured by way of a traceable carrier ( to avoid loss in transit) such as United Parcel Service (UPS), Roadway Parcel Service (RPS)
or First Class Mail to Cobra Factory Service, Cobra Electronics Corpora­tion, 6500 W. Cortland St., Chicago, IL 60707.
6. If the unit is in warranty, upon receipt of your unit it will either be repaired or
exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will auto­matically be sent informing you of the repair or replacement charge. If you have any questions, please call 1-773-889-3087 for assistance.
Registered with the FCC
Please note: This cordless telephone operates under part 15 and part 68 of FCC rules. Operation is subject to two conditions: 1) It may not interfere with radio communications, and 2) It must accept any interference received, including that which may cause undesirable operation. See the Operational Features section of this booklet for ways to reduce interference.
Your telephone company is required by the Federal Communications Commission to allow you to connect FCC registered telephones to their lines.
The FCC requires you to provide information, if requested by the local telephone company, about the connection of an FCC registered telephone to their lines. They may ask you for the FCC registration number and the ringer equivalence number (REN), both of which are on the bottom of the base. They may also ask for the Uni­versal Service Order Code (USOC) number, which is RJ-11C. It is illegal to use this phone on a party line or to connect it to a coin-operated tele­phone.
16
CP-2506.qx 11/12/97 12:35 PM Page 18
Limited One-Year Warranty
COBRA ELECTRONICS CORPORATION warrants that its COBRA cordless telephone products, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first con­sumer purchase. This warranty may be enforced by the first consumer purchas­er, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective cordless telephone products or component parts upon delivery to the Cobra factory Service Department, accompanied by proof of the date of first consumer pur­chase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for war­ranty service. The return charges will be at CobraÕs expense if the product is repaired or replaced under warranty. For further details concerning procedures for obtaining service, see the ÒIf You Need ServiceÓ section of this OwnerÕs Manual.
Exclusions: This limited warranty does not apply 1) to any product damaged by accident, improper line voltage or weather related circumstances; 2) in the event of misuse or abuse of the product or as a result of unauthorized alter­ations or repairs; 3) to non-defective original equipment Nickel Cadmium re­chargeable batteries; 4) if the serial number has been altered, defaced or re­moved; or 5) if the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.
Cobra shall not be liable for any incidental, consequential or other damages, including, without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
COBRA ELECTRONICS CORPORATION
6500 W. Cortland Street
Chicago, Illinois 60707
In addition to its exclusive series of swering systems, Cobra is also one of AmericaÕs leading brands of CB radios and accessories, and TRAPSHOOTER¨STEALTHª radar/laser detectors.
Intenna
cordless telephones and an-
17
CP-2506.qx 11/12/97 12:35 PM Page 19
Cobra Cordless Phone Accessories
Description Part No. Cost Ea. X Qty. = Amount
NICKEL-CADMIUM BATTERY PACK ASSEMBLY WITH CONNECTOR
For use with model CP-2506
213-013-9-001
$15.00
AC POWER ADAPTER
For use with model CP-2506 $10.00
(Prices subject to change without notice.)
★★
Illinois residents add 7%
★★
Cook Co. residents add .75% (7.75% total)
★★ ★★ ★★ ★★ ★★ ★★
Chicago residents add 1% (8.75% total) Indiana residents add 5% Michigan residents add 4 % Minnesota residents add 6% Ohio residents add 6% Wisconsin residents add 5%
786-004-N-001
Amount (Tax if applicable) Shipping//handling $3.75 Total
Make check or money order (no stamps) payable to:
Cobra Accessories Dept.
6500 W. Cortland St., Chicago, IL 60707
Call 1-773-889-3087 or FAX 1-773-622-2269 (for credit card orders)
Allow 4 to 6 weeks for delivery. Offer valid in Continental U.S. only.
Please print clearly:
Name Address (Not P.O. Box) City State Zip Credit Card No. Exp. Date Customer Signature
Circle One: Visa MasterCard Discover
CP-2506.qx 11/12/97 12:35 PM Page 20
Cobra Electronics Corporation
6500 W. Cortland Street
Chicago, IL 60707
PRINTED IN MALAYSIA © 1997 COBRA ELECTRONICS CORPORATION 480-141-P-001
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use