Cobra NavOne 2500, Intenna CP-2500 Operating Instructions Manual

OPERATING INSTRUCTIONS FOR YOUR
MODEL CP-2500
C O R D L E S S T E L E P H O N E
The antenna is in the phone,
not in your way...and the sound is incredible.
CHANNEL
1
Cordless Telephone Model CP-2500
Table of Contents
SUBJECT PAGE
Important Safety Instructions ..............................................................................2, 3
Introduction ................................................................................................................4
Installation Information ............................................................................................5
Quick Set-Up Guide ..................................................................................................6
Wall-Mounting Instructions ......................................................................................7
Using Your Phone ......................................................................................................8
Answering/Placing Calls at the Base ......................................................8
Answering/Placing Calls Away From The Base....................................8
Cordless Phone Operational Features ....................................................................9
Battery Saver Circuitry ..............................................................................9
Channel Selection ........................................................................................9
Compander Noise Reduction....................................................................9
Digital Security ..........................................................................................9
Flash ............................................................................................................10
Hearing Aid Compatibility......................................................................10
Illuminated Keypad ..................................................................................10
Intenna
System ..........................................................................................10
Last Number Redial..................................................................................10
Memory Dialing (Storage)........................................................................10
Memory Dialing (Recall) ..........................................................................11
Out-of-Range Signal ..................................................................................11
Power Failure Reset ..................................................................................11
Pulse/Tone Switch ....................................................................................11
Ringer Switch ............................................................................................11
Secur-Loc¨..................................................................................................11
Rechargeable Battery Information..........................................................................12
Battery Recharging ....................................................................................12
Replacing the Battery..........................................................................12, 13
Battery Disposal ........................................................................................13
Cleaning The Charging Contacts............................................................................13
About Cordless Phone Performance......................................................................14
Intenna
Cordless Telephone Troubleshooting Guide ..........................................15
If You Think You Need Service ..............................................................................16
Registered with the FCC..........................................................................................16
Limited One-Year Warranty....................................................................................17
Cordless Phone Accessories........................................................Inside Back Cover
2
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liq-
uid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not locate base unit near water, for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
5. Do not place this product on an unstable cart, stand or table. The product
may fall, causing serious damage to the product.
6. Slots and openings in the cabinet and the bottom or back are provided for
ventilation, to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in the bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indi-
cated on the marking label. If you are not sure of the type of power sup­ply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this prod-
uct where the cord will be abused by persons walking on it.
9. Do not overload outlets and extension cords as this can result in the risk
of fire or electric shock.
10. Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product, but
take it to qualified servicemen when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appli­ance is subsequently used.
12. Avoid using telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
Important Safety Instructions (continued)
14. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating in-
structions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni-
cian to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance.
The cordless handset operates on batteries, please read and follow instruc-
tions:
A. Use only the battery pack supplied with the unit or identical replace-
ment. B. Do not dispose of battery pack in a fire. The cells may explode. Check
with local codes for possible disposal instruction. C. Since released electrolyte is corrosive and may cause damage to eyes or
skin and may be toxic if swallowed:
C1. Do not open or mutilate battery pack.
C2. Always replace the entire battery pack rather than reusing one or
more cells.
C3. Do not expose batteries to heat or flame. D. Exercise care in handling the battery pack in order not to "short" the
battery contacts with conducting materials such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
15. Never install telephone wiring during a lightning storm.
16. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
17. Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
18. Use caution when installing or modifying telephone lines.
Save These Instructions
3
Introduction
Thank you for your purchase of a Cobra¨
Intenna®
Cordless Telephone Ñ
the world’s first and only full-range-power cordless telephone without any external antennas!
No more extending, bending, or breaking the antennas found on other cord­less phones Ñ your Cobra
Intenna
conceals its antenna systems inside the
handset and base, where they should be, out of your way.
Now you can install your new Cobra
Intenna
cordless phone virtually any­where. Without cumbersome external antennas to worry about, put your new phone anywhere a corded phone can go! Then enjoy the freedom of using your new cordless phone all over the house as well as outside in your yard.
Your new Cobra Model CP-2500 has 25 selectable channels (the maximum number available) for optimum interference-free use, and 10-number memo­ry dialing. The CP-2500 is also equipped with an extra-life battery which allows you to keep the phone away from the base for up to 14 days between recharges, and its Clear Call® PLUS Circuitry with compander noise-re- duction system ensures corded-phone sound quality.
Please take a moment to review this booklet and become familiar with all of the many user-friendly convenience features built into your new Cobra
Intenna
Cordless Phone.
If you need further assistance installing or using your new
Intenna
Cordless
Telephone, please call our toll-free consumer “hotline” at 312-889-3087 (773-889-3087 effective October 12, 1996), 8 a.m. to 8 p.m. CST, Monday through Friday (except holidays).
NOTE: Some cordless telephones operate at frequencies that may cause inter­ference to nearby TV's and VCR's. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of TV's or VCR's. If interference is experienced, moving the cordless telephone base fur­ther away from the TV or VCR will often reduce or eliminate the interference.
CAUTION: Any changes or modifications not expressly approved by Cobra could void the user's authority to operate the equipment.
4
How To Use Your
Cordless Telephone Model CP-2500
U.S. PATENT 4876709 U.S. PATENT 5351284
Note: The advanced channel scanning technique employed by the CP-2500Q ensures that a clear channel is chosen. The TALK button flashes during scanning. In the presence of radio interference (such as another cordless telephone or baby monitor in the area) there may be a slight delay in accessing the line when placing a call.
Installation Information
Maximum range is obtained by installing the base unit in the highest living
area of your home. The location you choose must be near an electrical outlet and a telephone wall jack.
AC ADAPTER
HANDSET
BASE UNIT
5
CHARGE INDICATOR
REDIAL BUT­TON
TALK BUTTON
FLASH BUTTON
CHANNEL BUTTON
TALK & BAT­TERY LOW INDI­CATOR
MEMORY BUTTON
POWER 9V DC JACK
PULSE/TONE SWITCH
RINGER ON/OFF SWITCH
INTERNAL ANTENNA
ILLUMINATED KEYPAD
Flash
Talk
I
S
1
G H
4
P
R
7
*
Channel
Talk
Bat Low
A B
C
2
D E F
3
J K L
M
5
N O
6
T U
W
V
8
X Y
9
O P R
O
#
Redial
Memory
Charge
CLEAR CALL PLUS
25 C H A N N E L
CLEAR CALL PLUS
25 C H A N N E L
Quick Set-Up Guide
The following basic steps enable quick and easy installation of your new Cobra
Intenna
Cordless Phone for use on a desk or countertop. You are en­couraged to review this complete instruction manual to become familiar with all of the operating instructions and features of your new phone.
NOTE: Before using, connect your new system to AC power (see instruc­tions below) to charge it overnight (at least 12 hours) for optimum condi­tioning of the rechargeable battery inside the cordless handset.
1 Insert round connector of power adapter into POWER jack (at rear of
cordless phoneÕs base; see diagram #1 below). Plug power adapter into a standard 120 VAC household electrical outlet. Then place handset in base so CHARGE indicator lights (see p. 12).
2 After charging, remove the twist-tie from the phone cord and plug the
modular telephone connector into the phone jack on your wall (see above).
3 Make sure that the RINGER switch is ON (located on base; see p. 11 for
details).
4 Set the PULSE/TONE switch (at the rear of the base) for proper opera-
tion (see page 11 for details).
Note: Make sure you have charged handset in base 12 hours before using.
Diagram #1 Connecting
power and
telephone
BASE UNIT— REAR VIEW
6
2
HANDSET
ON/OFF RINGER SWITCH
ELECTRICAL OUTLET
DC POWER JACK PULSE/TONE SWITCH
4
2
MODULAR PHONE JACK
PULSE/
RINGER
TONE
OFF ON P T
POWER
9V DC
Wall Mounting Instructions
The following steps enable installation on a new or existing telephone wall­mounting plate or directly onto a wall. (Your Cobra
Intenna
is designed to be used with any AT & T, GTE, local phone company or other wall-mounting plates that can be purchased from most local electronics stores.)
¥
Run telephone cord through cord wrap channel on bottom of base. (As shown). ¥ Plug modular phone connector into telephone wall jack. ¥ Align mounting studs on the plate to the holes on the bottom of the
Intenna
base; push base onto studs and slide down on the wall plate.
¥ Attach the power adapter to the POWER connection (on the base of the
phone) and plug into a household AC power outlet. ¥ To install directly on any wall, youÕll need to provide two screws and
wall anchors; follow these steps:
Ñ Drill two holes 3 1/4" apart and insert the wall anchors. Ñ Drive the screws into the anchors until the head of each screw is
protruding about 1/8" from the wall.
Ñ Align the holes in the cordless base over the screw heads; push base
in and slide down on screws (see diagram #3).
Ñ Plug modular phone connector into telephone wall jack; attach the
power adapter to the POWER connection (on the base of the phone) and plug into to a household AC power outlet.
7
Mounting Studs
Modular Phone Jack
Diagram #2: In-
stallation on a telephone wall­mounting plate
Diagram #3:
Installation
directly on a wall
Modular Phone Jack
Screw Heads
Using Your Phone
After charging the handset batteries overnight (at least 12 hours), your Cobra
Intenna
cordless phone will be ready for use.
ANSWERING/PLACING CALLS AT THE BASE
¥ To answer a call, just pick up handset from base when the phone rings.
The TALK button and TALK indicator will automatically light. When call is completed, return handset to base without pressing TALK button; your phone automatically disconnects.
¥ To place a call, pick-up handset from base and press and release the
TALK button (indicators will light). When you hear the dial tone, place your call.
ANSWERING/PLACING CALLS AWAY FROM THE BASE
¥ The TALK indicator must be off (not lit) when the handset is away from
the base. The phone is ready to ring if a call is received (RINGER Switch on the base must be in ON position).
¥ Press and release the TALK but-
ton (indicators will light) to answer or place a call.
¥ Press and release the TALK but-
ton when finished with a call. TALK indicators will go off and the call will be disconnected.
8
Note: The advanced channel scanning technique employed by the CP-2500 ensures that a clear channel is chosen. The TALK button flashes during scanning. In the presence of radio interference (such as another cordless telephone or baby monitor in the area) there may be a slight delay in accessing the line when placing a call.
Talk
I
S
A
1
B C
2
G H
4
P
R
7
F
J K L
5
N O
T U V
8
D E
3
M
6
W
CHANNEL SELECTION
25 selectable channels are built into your Cobra
Intenna
for optimum interference-free use.
If interference begins during a conversation:
¥ Press and release the CHANNEL button on
the handset. Your phone will automatically scan and advance to the next clear channel. A confirmation tone (two double beeps) will sound to indicate a successful channel change.
¥ If an alert tone (3 beeps) sounds, channel
change was unsuccessful. In that case, move closer to the phone base and press CHANNEL button again.
COMPANDER NOISE REDUCTION
Your Cobra
Intenna
has the Cobra Clear Call¨PLUS compander noise-reduction
system to minimize background noise for optimum audio performance.
The
sound of your phone will be comparable to the performance of a corded phone.
DIGITAL SECURITY
Your Cobra
Intenna
features 65,000 combinations of digital security coding (in accordance with FCC regulations) to reduce the chance of interference from your neighbors' cordless phones. These inaudible, electronic codes are transmit­ted automatically by your phone to establish a secure link between your cord­less handset and base.
Cordless Phone Operational Features
9
The following features offer state-of-the-art performance and the ultimate in user-friendly convenience with your new Cobra
Intenna
cordless telephone.
BATTERY SAVER CIRCUITRY
The handset of this phone may be kept away from the base (TALK indicator OFF) up to 14 days at a time. In this condition, it is ready for you to answer or place calls by pressing and re­leasing the TALK button.
Note: A warning beep tone will sound and the TALK/BAT indicator will flash when the handset battery needs recharging (see p. 12). The duration of the battery charge will depend on your actual use of the phone in its remote location.
Flash
Talk
H I
R S
Flash
G
P
*
Talk
I
S
A
1
B
C
2
D E
F
J K
L
T U
V
O P
R
Channel
Talk
Bat Low
Channel
Talk
Bat Low
3
M
5
N
O
6
W
8
X
Y
9
O
#
Redial
Memory
A B C
2
D E F
3
J K L
M
5
N O
6
T U
W
V
8
X Y
9
O P R
O
#
Redial
Memory
4
7
1
G H
4
P R
7
*
10
FLASH
This feature briefly interrupts the phone line so that you may access some of the advanced featuresÑ like ÒCall WaitingÓ and ÒThree-Way CallingÓÑ that may be offered at extra cost by your local telephone company. Press and release the FLASH button on the handset to answer a second phone call or place a confer­ence call if you subscribe to these services.
HEARING AID COMPATIBILITY
Your cordless telephone handset is compatible with inductively coupled hearing aids (HAC).
ILLUMINATED KEYPAD
When the phone rings or you touch any button, the keypad automatically lights up, making it easier to read and use, even in the darkest room or late at night.
SYSTEM
The revolutionary, patented
Intenna
hidden-antenna system is a Cobra exclusive.
Intenna
is the worldÕs first and only full-range-power cordless telephone that con­ceals the handset and base antennas inside the phone and out of the way. No more antennas to extend, bend or break. CobraÕs hidden antennas are perfectly matched to your phoneÕs microprocessor circuitry for optimum performance offering the ultimate in user-friendly convenience.
LAST NUMBER REDIAL
Each time you dial, the phone number youÕre calling is automatically saved in a special REDIAL memory. To call that number again at a busy signal, press FLASH (without hanging up) to get a new dial tone, then press and release the REDIAL button. If you wish to try the call in a few minutes, use TALK to access the dial tone, then press and release the REDIAL button. The number will automatically be redialed.
MEMORY DIALING (STORAGE)
Your Cobra
Intenna
cordless phone enables you to store up to ten frequently dialed phone numbers or emergency numbers. With the TALK button off, press and release the MEMORY button ; enter the digits of the phone number you wish to store, up to 16 digits; press and release the MEMORY button again. Now assign your memory number a position by entering any keypad number from 0 to 9. You will hear a confirmation beep. NOTE: for automated banking or alternate long distance service, you may need to program a num­ber which is longer than 16 digits. You will need to divide the number between two memory I.D. numbers. Follow the steps above.
MEMORY + TELEPHONE + MEMORY + I.D. # = CONFIRMATION
NUMBER (0Ð9) TONE
MEMORY DIALING (RECALL)
To call a number stored in memory, press TALK to get a dial tone; press MEM­ORY button. Press the keypad number you assigned to that number and your phone will automatically dial the number. NOTE: for longer numbers which you have stored in two different I.D. numbers, follow steps above, pressing MEMORY button again before entering the second number. Use the memory sticker card provided to write down the names of each memory position. Keep this in any covenient place.
PULSE/TONE SWITCH
Your Cobra
Intenna
cordless phone can be used with any phone system because it is switchable from pulse to tone dialing (see switch on back of the base) depending on which service you are using. Mixed PULSE and TONE dialing may be used (to access certain long-distance or computerized banking services, for example) by selecting PULSE with the base switch and then using the button on the handset to temporarily switch to TONE dialing. Hanging up resets to PULSE.
RINGER SWITCH
The OFF/ON switch (located on back of the base) con­trols your cordless handsetÕs electronic ringer; no ring will sound in the OFF position.
SECUR-LOC
®
This exclusive Cobra electronic circuitry is an added security measure to protect your phone line from being accidentally accessed by a neighbor's cordless phone. Secur-Loc activates automatically when your cordless hand­set is placed into its base.
OUT-OF-RANGE SIGNAL
If three beeps are heard immediately after the TALK button is pressed, the handset is too far away from the base. The handset and TALK indicator will automatically turn off. Move closer to the base and then try your call again.
POWER FAILURE RESET
After a power failure in your home (or any time you unplug your phone from AC power and then reconnect it), you must return the cordless handset to the base for about 15 seconds. This automatically matches the digital security codes.
PULSE TONE
OFF ON
RINGER
TALK + MEMORY + I.D.# = MEMORY DIAL
0-9
11
Rechargeable Battery Information
NOTE: Before using your new Cobra
Intenna
cordless telephone for the first time, you must charge the battery overnight (at least 12 hours) for optimum long-life conditioning of the nickel-cadmium rechargeable handset battery.
BATTERY RECHARGING
When your cordless handset battery needs recharging, the following alerts will remind you to immediately return the handset to the base for recharg­ing (this normally requires at least 12 hours of continuous charging):
NOTE: The CHARGE indicator will
remain on as long as the handset is in the base, even after the batteries are fully recharged. The batteries will not be
damaged if the handset remains in the base continuously; the charging system
is self-adjusting and will never over­charge the batteries.
REPLACING THE BATTERY
The rechargeable NiCad battery in your cordless phone may need to be re­placed if the handset will not function when the TALK button is pressed after recharging for 12 hours.
Replacement batteries are available direct from Cobra. See accessories order form at the end of this booklet or call 312-889-3087 (773-889-3087 effective October 12, 1996).
#
O
1. The TALK/BAT indicator on the
handset will flash.
3. When handset has been away
from the base and needs recharg­ing, it will beep at 30 second inter­vals for five minutes. After this time, the handset will seem "dead". It will not flash or beep, nor will you be able to get a dial tone. Return handset to base for recharging.
2. A warning (2 beeps every 30 sec-
onds) will sound while you are using the phone. This indicates you have only a few minutes of battery power remaining to com­plete your conversation before the phone disconnects.
12
BEEP
BEEP
Flash
Channel
Bat Low
Talk
I
R S
Charge
Talk
G
H
P
Redial
Memory
A
1
B C
2
D E
F
4
7
3
J K L
M
5
N
O
6
T U
W
V
8
X
Y
9
1. To remove the battery door, press
and slide downward.
2. Carefully disconnect the battery
pack and dispose of it properly. See BATTERY DISPOSAL below.
3. To replace, connect the new bat-
tery and replace the door. Return the handset to the base and charge the battery overnight (at least 12 hours).
REPLACING THE BATTERY (continued)
BATTERY DISPOSAL
The rechargeable nickel cadmium (NiCad) battery in this product must be recycled or disposed of properly in compliance with all applicable laws. Certain states or municipalities require recycling and have established collec­tion programs. Please contact your local waste removal authority for instruc­tions, or return to Cobra for recycling. Wrap batteries carefully and mail postage prepaid to:
Cobra Electronics Corporation
6500 W. Cortland Street
Chicago, IL 60707
Attn: Battery Recycling
DO NOT PUT BATTERIES INTO FIRE OR EXPOSE TO HIGH HEAT. THEY MAY EXPLODE.
"Contains Nickel-Cadmium Re-
chargeable Battery.Must be recy-
cled or disposed of properly."
CLEANING THE CHARGING CONTACTS
Clean the two metal charging contacts on the base and handset with a soft, dry cloth on a regular basis to ensure optimum performance of the battery­charging system. Rubbing alcohol may be used if more thorough cleaning is required.
13
-
RBRC
About Cordless Phone Performance
Your Cobra
Intenna
cordless phone uses radio transmission to communicate between the base and handset. It is thus subject to occasional interferenceÑ static or buzzing noises, for example. These conditions may be caused by electrical motors on household appliances, fluorescent lights, electrical storms and other sources.
These steps will enhance the maximum performance of your new phone:
Change channels by pressing the CHANNEL button on the handset if you experience interference.
Don't cover the upper section of the cordless handset with your hand (see diagram below). This may block the internal antenna locat-
ed at the top of the handset, possibly reducing the phone's range and audio clarity. Always hold the handset at the middle or close to the bottom.
Avoid resting the handset on your shoulder during conversations; this may also block the performance of the internal antenna.
Don't plug your phone's power cord into an active AC outlet that also provides power for a major appliance or for charging units for cordless appliances (vacuums, screwdrivers, etc.) or other electronic devices.
Hold the
cordless handset at the
middle or bottom area
of your phone for
best performance.
14
INCORRECT CORRECT
Cordless Telephone
Troubleshooting Guide
If your cordless phone does not seem to operate properly, please check the following and refer to the appropriate sections in this booklet for detailed in­formation:
¥ The phone is dead; no indicator lights are on: Are the power cord
and telephone cord connected?
¥ Handset beeps during conversations or when away from the base:
The batteries need recharging; return the handset to the base for overnight recharging.
¥ Hearing poor audio or added interference during calls: DonÕt
cover the top section of the handset with your hand or rest the phone on your shoulder. This blocks the special internal Cobra
Intenna
handset antenna.
¥ Handset disconnects, loses performance and/or beeps three times
when in use away from the base: You may be out of range or your batteries may need recharging. Move closer to the base and/or re­charge batteries.
¥ Unable to make a call due to interference: Select a new channel. ¥ Handset won’t work after a power outage or after disconnecting
phone from AC power and then reconnecting it: Return the hand­set to the base for about 15 seconds to automatically match the secu­rity coding.
¥ Handset seems "dead.": Battery power has run out; return handset
to base and charge for at least 12 hours. If handset still seems dead, unplug the handset battery for 15 seconds and plug back in and then place the handset back on the base for at least 5 minutes.
¥ Memory dialing does not work: Handset battery may have become
completely discharged; recharge handset in cradle (12 hours) then re-enter your memory dialing numbers (see p. 10).
15
If You Think You Need Service, Call 773-889-3087
16
Registered with the FCC
Please note: This cordless telephone operates under part 15 and part 68 of FCC rules. Operation is subject to two conditions: 1) It may not interfere with radio communications, and 2) It must accept any interference received, including that which may cause undesirable operation. See the Operational Features section of this booklet for ways to reduce interference.
Your telephone company is required by the Federal Communications Commission to allow you to connect FCC registered telephones to their lines.
The FCC requires you to provide information, if requested by the local telephone company, about the connection of an FCC registered telephone to their lines. They may ask you for the FCC registration number and the ringer equivalence number (REN), both of which are on the bottom of the base. They may also ask for the Uni­versal Service Order Code (USOC) number, which is RJ-11C. It is illegal to use this phone on a party line or to connect it to a coin-operated tele­phone.
For technical assistance, please call our Automated Help Desk which can assist you by
answering the most frequently asked questions about Cobra products.
(773) 889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through
this same number 8:00 am - 8:00 pm, Monday through Friday, CST.
Technical assistance is also available on-line in the Frequently Asked Question (FAQ)
section at www.cobraelec.com or by e-mail to productinfo@cobraelec.com
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the following, in order to have the product serviced and returned.
1. For Warranty Repair, include some form of proof-of-purchase, such as a me-
chanical reproduction or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product. Must include base, handset cords and power adapter
furnished with the product.
3. Enclose a description of what is happening with the unit. Include a typed or
clearly printed name and address of where the unit is to be returned.
4. Pack unit securely to prevent damage in transit. If possible, use the original
packing material.
5. Ship prepaid and insured by way of a traceable carrier ( to avoid loss in transit) such as United Parcel Service (UPS), Roadway Parcel Service (RPS)
or First Class Mail to Cobra Factory Service, Cobra Electronics Corpora­tion, 6500 W. Cortland St., Chicago, IL 60707.
6.
If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged depending on the model. Please allow approximately 3 to 4 weeks before contacting us for status. If the unit is out of warranty a letter will automat­ically be sent informing you of the repair or replacement charge. If you have any questions, please call 312-889-3087 (773-889-3087 effective October 12, 1996) for assistance.
Limited One-Year Warranty
COBRA ELECTRONICS CORPORATION warrants that its COBRA cordless telephone products, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first con­sumer purchase. This warranty may be enforced by the first consumer purchas­er, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective cordless telephone products or component parts upon delivery to the Cobra factory Service Department, accompanied by proof of the date of first consumer pur­chase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for war­ranty service. The return charges will be at CobraÕs expense if the product is repaired or replaced under warranty. For further details concerning procedures for obtaining service, see the ÒIf You Need ServiceÓ section of this OwnerÕs Manual.
Exclusions: This limited warranty does not apply 1) to any product damaged by accident, improper line voltage or weather related circumstances; 2) in the event of misuse or abuse of the product or as a result of unauthorized alter­ations or repairs; 3) to non-defective original equipment Nickel Cadmium re­chargeable batteries; 4) if the serial number has been altered, defaced or re­moved; or 5) if the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warran­ty.
Cobra shall not be liable for any incidental, consequential or other damages, including, without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
COBRA ELECTRONICS CORPORATION
6500 W. Cortland Street
Chicago, Illinois 60707
17
In addition to its exclusive series of
Intenna
cordless telephones and an­swering systems, Cobra is also one of AmericaÕs leading brands of CB radios and accessories, and TRAPSHOOTER¨STEALTHª radar/laser detectors.
Description Part No. Cost Ea. X Qty. = Amount
AC POWER ADAPTER
For use with model CP-2500 $10.00
768-026-N-001
NICKEL-CADMIUM BATTERY PACK ASSEMBLY WITH CONNECTOR
For use with model CP-2500
$15.00
213-013-9-001
Cobra Cordless Phone Accessories
Allow 4 to 6 weeks for delivery. Offer valid in Continental U.S. only.
★★
Illinois residents add 7%
★★
Cook Co. residents add .75% (7.75% total)
★★
Chicago residents add 1% (8.75% total)
★★
Indiana residents add 5%
★★
Michigan residents add 4 %
★★
Minnesota residents add 6%
★★
Ohio residents add 6%
★★
Wisconsin residents add 5%
Amount (Tax if applicable) Shipping//handling $3.75 Total
Make check or money order (no stamps) payable to:
Cobra Accessories Dept.
6500 W. Cortland St., Chicago, IL 60707
Call 1-773-889-3087 or FAX 1-773-622-2269 (for credit card orders)
Please print clearly:
Name Address (Not P.O. Box) City State Zip Credit Card No. Exp. Date Customer Signature
Circle One: Visa MasterCard Discover
PRINTED IN MALAYSIA © 1997 COBRA ELECTRONICS CORPORATION 480-142-P-001
Cobra Electronics Corporation
6500 W. Cortland Street
Chicago, IL 60707
Loading...