Cobra GTT450 Owner's Manual
MODEL: GTT450
GARDEN TRACTOR TRAILER
OWNERS MANUAL
CAUTION:
Before using this product, please read this manual carefully to understand the proper use of your garden
cart. Please keep this manual for future reference.
Product colours may vary.
PLEASE NOTE: NEVER CARRY PASSENGERS IN THE GARDEN TRACTOR TRAILER
2
Important Safety Instructions
1. Read this entire instruction manual carefully before attempting to use or assemble this trailer.
2. Do not load the trailer with more than 660 lbs. (300 kg).
3. Do not allow children to play in or around the trailer.
4. Always distribute the load evenly over the surface of the trailer bed.
5. Do not load items on top of the side rails. Lower the side rails when loading large or heavy objects.
6. If any part becomes damaged, broken or misplaced, do not use the trailer until a replacement part has
been obtained.
7. Do not operate on or roll over objects that could cause damage to the pneumatic tires or tubes.
8. Do not inflate tires to more than 28 psi.
9. Save these instructions for future reference.
Care and Maintenance
Check tyre pressure regularly. Inflate if necessary. Do not over inflate.
Check bolts periodically to ensure they are secure. Do not over tighten bolts.
Cover or store indoors when not in use.
Preparation
Estimated Assembly Time: Approximately 45 minutes
Tools required for assembly:
• Adjustable Wrench or 7/16 SAE. Socket
• Flat Head Screwdriver
• Pliers
3
Parts & Hardware List
Part#
Description
Quantity
1
Bed
1 2 Left undercarriage support
1 3 Right undercarriage support
1 4 Screw M8x20
8 5 Small flat washer M8
14 6 Hex nut M8
14 7 Front leg
1 8 Axle
1 9 Tow bar
1
10
Wheel
2
11
Large flat washer
2
12
Hex nut M16
2
13
Side panel
2
14
Front /back panel
2
15
Left lock handle
2
16
Right lock handle
2
17
Quick release pin
12
18
Control lever
1
19
Spring
1
20
Yoke
1
21
Bolt
1
22
Screw M8x90
2
23
Quick release pin 4mm
1
STEP 1
Turn the trailer bed upside down. If necessary, use the cardboard from the carton to prevent scratching and damage to
the finish.
STEP 2 Undercarriage Support Assembly
Parts and Hardware Required:
4
5
6
9
10
11
12
18
21
22
21 23
Loading...