Cobra FRS121C Service Manual

FRS121C
2-WAY RADIO MODEL
Nothing Comes Close To A Cobra
English
Owner’s Manual
Printed in China Part No. 480-065-P
2
Making Life Easier & Safer
Introduction
Staying in touch with your family and friends is convenient and easy when using your microTALK
®
radio. Some of the many uses you will discover include:
Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
Secure your microTALK
®
radio while on the go.
Carrying your microTALK
®
radio with you is
easy when using the belt clip or wrist strap. The belt clip easily attaches to your belt, purse,
or backpack. Simply squeeze the clip and place it where you prefer.
For Assistance In Canada or the U.S.A.
In this user’s manual, you should find all the information you need to operate your microTALK
®
radio. If you require further assistance
after reading this manual, Cobra
®
Electronics offers the following
customer assistance services:
Automated Help Desk
English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators
English and Spanish. 8:00 a.m. to 6:00 p.m. CT, Monday through Friday (except holidays) 773-889-3087 (phone).
Questions
English and Spanish. Faxes can be received at 773-622-2269 (fax).
Technical Assistance
English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo
@cobra.com (e-mail).
For Assistance Outside Canada, the U.S.A. or in French
Contact Your Local Dealer
©2003 Cobra®Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 USA
www.cobra.com
Belt Clip
Wrist Strap
Customer Assistance
Battery
Compartment
Battery
Door Latch
BeltClip
3
Product Features
Introduction
On/Off Power Button
Backlit LCD Display
Channel Up/ Down Buttons
Speaker/Microphone
Call Button
Light/Max Range Button
Antenna
Volume Up/ Down Button(s)
Mode/Lock
Button
Talk
Button
Wrist Strap
Connector
Industry Canada Notice: Operation is subject to the following two (2) conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. «IC» before the equipment certification number signifies that the Industry
Canada technical specifications were met. It does not guarantee that the certified product will operate to the user’s satisfaction.
Important FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra
®
, may cause a violation of the technical regulations of part 95 of the FCC
Rules, or violation of Type Acceptance requirements of Part 2 of the Rules.
4
Product Features
Introduction
Features
• Two-Way Radio
With a range up to three (3) kilometers (2 miles).
• 14 Channels
• UHF FM Frequencies
• Backlit LCD Display
• Call Alert
• Key Lock Button
• “Roger Beep”
Selectable On/Off confirmation tone.
• Battery/Power Saver
• Auto Squelch
• Maximum Range Extender
• Belt Clip
• Wrist Strap
Caring for Your microTALK®Radio
Your microTALK®radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures.
Backlit LCD Display
Receive (RX)/ Transmit (TX) Icon
Lock
Icon
Roger Beep Icon
Battery Low Icon
Main Channel
Numbers
Batteries
To Install or Replace Batteries:
1. Remove belt clip by releasing belt clip latch and sliding clip up.
2. Pull up on the Battery Door Latch to remove the battery compartment cover.
3. Insert four (4) AAA batteries. (Always use high quality alkaline batteries.) Position batteries according to polarity markings.
4. Replace Battery Compartment cover and belt clip.
Contact your local Cobra
®
dealer or
Cobra
®
directly for optional battery pack
and desktop charger accessories.
Tur ning On Your microTALK®Radio
To Turn On Your Radio:
1. Press and hold the Power button until you hear a series of audible tones indicating the radio is On.
Your microTALK
®
radio is now in Standby Mode,
ready to receive transmissions. The radio is always in Standby Mode except when the Talk or Call buttons are pressed.
Battery Low
When battery power is low, the Battery Low icon will blink. Your batteries should be replaced or recharged, if using rechargeable batteries.
Battery/Power Saver
Your microTALK®radio has a unique circuit designed to extend battery life. If there are no transmissions within ten (10) seconds, the radio will automatically switch to Battery Save Mode. This will not affect the radio’s ability to receive incoming transmissions.
5
Using Your Radio
Operation
On/Off Power
Battery Low
Insert Batteries
Pull Up Lock Tab
Remove Belt Clip
6
Using Your Radio
Communicating with Another Person
To Talk To Another Person:
1. Press and hold the Talk button.
2. With the microphone about five (5) centimeters (2 inches) from your mouth, speak in a normal voice.
3. Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to the same channel to communicate.
Channels
To Select a Channel:
1. With the radio On, select any of the 14 channels by pressing the Channel Up or Channel Down button.
Both radios must be tuned to the same channel to communicate.
Listening for a Response
When You are Finished Talking:
1. Release the Talk button to receive incoming transmissions. Your microTALK
®
radio is always in
Standby Mode while the Talk or Call buttons are not pressed.
Volume
To Adjust the Volume:
1. Press the Volume Up or Volume Down button.
A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8).
Operation
Talk Button
5 cm (2 inches) From Mouth
Channel Select
Listening
Volume Select
Volume Level
7
Using Your Radio
Operation
Call Button
To Alert Another Person That You Are Calling:
1. Press and release the Call button.
The other person will hear a two (2) second ringing tone. You cannot send or receive transmissions during the two (2) second call tone.
“Roger Beep” Confirmation Tone
Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. This feature can be turned On or Off.
When turning On your microTALK
®
radio for the first
time, “Roger Beep” will be On.
To Turn “Roger Beep” On or Off:
1. Press and release the Mode/Lock button until the “Roger Beep” icon flashes. The current On or Off setting is displayed.
2. Press the Channel Up or Channel Down button to select “Roger Beep” On or Off.
3. a. Press the Mode/Lock button to enter the new
setting and return to Standby Mode.
b Do not press any buttons for 15 seconds to enter
the new setting and return to Standby Mode.
The setting you select will be saved when you turn your radio Off and On again. When the “Roger Beep” is On, the “Roger Beep” icon will be displayed.
Call Button
Roger Beep Icon
Roger Beep Off
Mode/Lock Button
Loading...
+ 15 hidden pages