Cobra AirWave Mini CWA BT300 Information Manual

Mini Speaker

Printed in China Part No. 480-919-P Version D

Information Guide

CWA BT300

Product

2 3

IMPORTANT

To get the full capability of your new Cobra Airwave® Mini,
please read this manual. It's more than just a Bluetooth®
Speaker!

CHARGING

The Cobra Airwave® Mini has a built-in Li-ion battery (3.7V,
1600 mAH), so it can be used without connecting to a
power supply. To charge the battery, follow these steps:

1. Connect the micro USB connector to the Cobra
Airwave® Mini micro-USB input.

2. Plug the USB full-size connector into the micro­USB input. A common USB type AC charger (DC
5V, 500mA) or any USB power source.

• When the device is charging the LED status
indicator will be RED. When fully charged the RED
status indicator LED will go off.

• A full charge will last for up to 12 hours of
normal use.

Volume Down

Volume Up

Micro-USB Charging Point (under ap) TIP: Use a

pen tip to lift
ap open.

Multi-Button

CARE AND MAINTENANCE

1. Never try to disassemble or service the product
by yourself.

2. Keep the Cobra Airwave® Mini and accessories out
of reach from children.

3. Do not expose the Cobra Airwave® Mini to
temperatures above +55 deg C (+131 deg F). If
the product is operated in extreme hot or cold
temperature, the battery capacity is reduced. Use it
at room temperature for maximum battery capacity.

Microphone

Wrist Strap
Insert

CWABT300_MANL_vD.indd 2-3 4/16/14 1:51 PM