Cobra AirWave CWA BT310 Information Manual

TM

®

Waterproof Bluetooth

Speaker

Printed in China Part No. 480-933-P Version A

Information Guide

CWA BT310

Product

2 3

CHARGING

The Cobra Airwave™ Box has a built-in Li-ion battery, so it
can be used without connecting to a power supply.
To charge the battery, follow these steps:

1. Connect the micro USB connector of the supplied USB
cord to the Cobra Airwave

™

Box micro-USB input.

2. Plug the USB full-size connector into a computer USB
port, common USB type AC charger (DC 5V, 500mA) or
any USB power source.

• When the device is charging the LED status indicator will
be RED. When fully charged the RED status indicator
LED will go off.

• A full charge will last for up to 10 hours of normal use.

CARE AND MAINTENANCE

1. Never try to disassemble or service the product by yourself.

Opening the unit will damage the seals that make it waterproof!

2. Keep the Cobra Airwave™ Box and accessories out of

reach from children.

3. Do not expose the Cobra Airwave™ Box to temperatures

above +55° C (+131° F). If the product is operated in extreme
hot or cold temperature, the battery capacity is reduced.
Use it at room temperature for maximum battery capacity.

4.

The Cobra Airwave™ Box is waterproof and it can be
cleaned by rinsing off or with a soft cloth and mild detergent.

5. Although the product is IPX7 compliant, it is not designed

to be used for extended periods of time oating in water.
Please make sure the rubber cover over the jack is closed
tightly while around water. Retrieve and dry if the speaker is
dropped in water.

PRODUCT FEATURES

Microphone
(hidden)

LED Light

FRONT VIEW

REAR VIEW

TOP VIEW

SIDE VIEW

LoudspeakersSpeaker Mesh Rubber Sleeve

Volume Down Volume Up

Multi-Function Key

Audio In Jack

USB Jack

Water-Tight Cover
(Shown Open)

CWABT310_MANL.indd 2-3 2/6/14 11:10 AM