Fusion
User Manual
COBAN£Technologies Inc.
11375 W. Sam Houston Parkway S. # 800
Houston, TX 77031
Tel: 1-281-925-0488
Fax: 1-281-925-0535
http://www.cobantech.com
Fusion User Manual
Introduction
The Coban Fusion mobile recorder is the front line of the Digital Video Management System (DVMS). The mobil
recorder allows users to record two channels of audio and two channels of video streams simultaneously to the
in-car CPU. This information is stored in the Mobile Hard Disk Drive until it can be transferred to the BOClient.
This manual addresses the steps needed to properly use the Mobile recording system.
Log In to the Fusion Mobile Recorder
1. After the mobile recording system has been
powered up, the Mobile Start Recorder
Software will initiate and display the Officer
Log-In screen.
Note:The officer ID should be automatically entered
into the appropriate field from information input
during MHDD checkout. If not, enter the appropriate
Officer ID.
2. Tap the Password button to display the
Virtual Keypad.
3. Type your password using the Virtual
Keypad then tap OK.
4. Tap Login.
5. The System Time and Date screen will
appear. Change the system time and date if
it is incorrect using the appropriate arrow
keys.
6. Take note of the estimated remaining
recording time.Storage remaining for video
recording is displayed above the OK button.
Note:A warning prompt will be displayed if available
recording time is under 4 hours.
7. Tap OK.
Version Q4 2013 www.cobantech.com Page 2 of 27
Fusion User Manual
NOTE:A successful Login will show the Officer ID
number on the bottom right of the Camera View
screen.
Minimize/Maximize
the Application Window
1. Tap the application icon to minimize the
window.
2. Tap Hide Camera View to minimize the
application window and access the desktop.
Version Q4 2013 www.cobantech.com Page 3 of 27
Fusion User Manual
3. Tap the application icon to return to the
Camera View Screen.
Version Q4 2013 www.cobantech.com Page 4 of 27
Fusion User Manual
Camera View Screen
Thisscreen displays the camera input and providesoptions for the user to start recording, create bookmarks, take
snapshots of the video and other functions.It also provides iconsthatreflect the light bar status, radar gun reading,
GPS indicator (if installed), and the in-carmicrophone ON / OFF status.At the bottom of this screen, it shows the
Pre-EventBuffering time, which indicates the length of video that is being pre-recorded prior to User pressing
theRecord button.
Record
Buttons
Function
Buttons
Camera Preview
Snapshot Function Recording Indicators
Minimize/Enlarge
Button
Date and Time
Video Logs
Playback Function
Secondary Camera
View
Mic Icon
Buffer Setting
Version Q4 2013 www.cobantech.com Page 5 of 27
Light Bar
Indicator
Fusion User Manual
Camera Preview–The camera preview displays the image as seen through the camera lens. The defualt image is
set as the front facing camera in most cases. For TopCam user, tap the camear view to toggle between enlarged
and normal view (see page ??? for more information on this fuction.)
Video Log - The Video Log documents readings and status from various devices such as, light bar status,
microphone status, bookmark, etc.
Snapshot Function–Tapping the snapshot icon will take a JPG freeze frame image of the video at that point in
time. A preview of the snapshot will be displayed immediately beneath the snapshot icon for fifteen seconds (see
page for more information on snapshot function.)
Minimize/Enlarge Button – The minimize/enlarge button will minimize or enlarge the mobile recorder application
and allow users the ability to access other programs on the computer.
Recording Indicators–The recording indicators blink red to signify which camera is recording. If not cameras are
recording the recording indicators do not blink. When there is only onecamerainstalled on the vehicle, the user will
not see a C1 and C2 camera indicator. Users can tap on the recording indicators to make that cameras view active
on the Camera Preview.
Date and Time – The Data and Time display is set during the officer log in sequence and continuously displays the
current date and time.
Buffer Setting – The Pre-Event buffer is set by the System Administrator through Coban’sBOCllient application.
The Pre-Event Buffer display is a reminder to the user that all recordings are provided with a set pre-event
recording. This buffer can be adjusted through BOClient or in some cases through mobile recorder.
Mic Icon – The wireless microphone icon will blink when the wireless microphone is recording audio.
Light Bar Indicator – the light bar indicator will blink when the vehicles light bar is activated.
Function Buttons–The function buttons provide users the access to greater functionality, including:
The Menu button provides useraccess to Camera View, Playback,Switch User, or Exit. (Please referto Page 16 for
moredetails)
Bookmark Iocn – Tap the bookmark icon to set a mark in a video for ????
Auto Zoom - When pressed, will automatically zoom the camera, pause for 3 seconds and zoom back toUser’s
original zoom setting. There isno need to manually disengage.
Press CameraControl to access Zoom, Brightness& Focus Control.
The More button allows user to access additional enhancement options.(Please refer to
Page 9 for more detail)
Secondary Camera View - SIf installed, will be configured asC2 (camera 2) a second image will appear below the
primary camera image next to the C2 icon.
Playback Functions - Allows user to playback previously recorded video, enter / edit video event data, send
selected video wirelessly (if wireless option is purchased) and manually retain video. (Please referto Page 17 for
moredetails)
Record Buttons - User may initiate recording by pressing the wireless microphone, turning on thelight bar or siren
(if equipped as a system trigger), or pressing the“RecordButtons” on thescreen.
Radar SpeedReading:If installed, T=Target Speedand P=Pursuit Speed
GPS Reading: If installed,GPS readingwill be displayed.
Version Q4 2013 www.cobantech.com Page 6 of 27
usion U
er Man
al
eco
he core fea
i
itiates a re
nd to view
tart a Re
1. Tap
reco
vide
2. Tap
reco
the v
ote:If the v
sercanswitc
amera 3by
evideo ima
ote: Theth
hite square
cording a v
ot Recordin
din
ure of the m
ording. The
ideos as the
ording
he camera
ding using t
recorder.
he camera
ding using t
ideo record
hiclehasthr
h the displa
ouble tappi
edisplay.
camera 1 i
when the m
ideo.
g Re
obile record
Coban mobi
y are being
icon
e primary c
icon
e secondar
r.
e cameras,
betweenca
g on
on will be
bile record
ording
ng system i
le recording
ecorded.
to begin a
mera via t
to begin a
camera vi
the
mera 2and
beneath
hown as a
r is actively
its ability t
system inc
e
quickly and
rporates a
accurately
ultitude of
apture vide
ptions to st
s when the
rt a recordi
user
g,
3. The
signi
reco
4. Whil
scre
by p
5. Tap
reco
6. Tap
the r
ersion Q4 20
ecording in
y which ca
ding.
in recordin
n provides
essing the
he camera
ing using th
he camera
cording on
13
icators will
eras are ac
mode, the
he ability to
ookmark ic
icon
e primary c
icon
he seconda
link red to
ively
preview
set bookma
n.
to stop
mera.
to stop
ry camera.
ks
w
w.cobantech
.com
Page
of 27
usion U
er Man
al
vent
he Event T
VMS classi
obile recor
nce the vid
elect an
1. Tap
to st
2. The
Type
pe screen
y the video,
er system
o has been
vent Ty
he camera i
p recoding.
vent Type
ill pop up i
and allows
ill return tot
linked to an
e
on
creen will a
mediately a
eta-data a
e Camera
event type.
or
pear.
ter the user
d other det
iew Screen
stops a vide
ils about th
andWireles
o recording.
video to b
Microphon
The event
stored with
will also ret
ype helps t
the video. T
rn to stand
e
e
y
ote:
The Ev
pproximatel
efault to the
3. Tap
the v
Type
is se
4. Tap
ote:
Events
vent type li
OClient.
nt Type sc
45 second
Camera Vi
he appropri
ideo that wa
will be high
ected.
elect
to en
can be add
t by the syst
een will sta
, then the s
w screen.
te event ty
s recorded.
ighted in lig
er the even
d or remov
em adminis
up for
stem will
e to classify
he Event
t blue whe
type.
d from the
rator throug
it
ersion Q4 20
13
w
w.cobantech
.com
Page
of 27
Fusion User Manual
5. Tap any of the text fields to display the
Virtual Keypad.
6. Type information regarding the recording
using the Virtual Keypad then tapOK.
Version Q4 2013 www.cobantech.com Page 9 of 27