Coaster 802781 Assembly Guide
802781
WRITING DESK
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 7
REVISION 0: 12/11/2018
ITEM :
www.coastercompany.com
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy
802781
assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 15 MINUTES
ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION
A
B
C
PART NAME
LEG FRAME
TOP
BOTTOM TRESTLE BAR
FIGURE
QTY
4PCS
1PC
4PCS
D
E
TOP TRESTLE BAR
SHELF
4PCS
4PCS
PAGE 2 OF 7
www.coastercompany.com
ITEM :
802781
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy
assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
HARDWARE NAME
1
2
3
4
5
BOLT
(Φ1/4" x 45mm - BLK)
WOOD DOWEL
(Φ10 x 40mm)
SHORT FLAT HEAD SCREW
(Φ4 x 30mm - BLK)
LONG FLAT HEAD SCREW
(Φ4 x 45mm - BLK)
ALLEN WRENCH
(4MM - BLK)
FIGURE
QTY
8PCS
8PCS
28PCS
16PCS
1PC
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 3 OF 7
Loading...