Page 1
TWIN/XL QUEEN BUNKBED
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
PAGE 1 OF 8
REVISION 0 : 10/29/2018
Page 2
ASSEMBLY INSTRUCTIONS
B1 (BOX 1)
PART NAME
A
B
C
D
B2 (BOX 2)
LEFT UPPER
RIGHT UPPER
LEFT LOWER
RIGHT LOWER
FRONT & BACK
E
FRONT & BACK
F
FRONT & BACK
G
H
I
J
GUARDRAIL
GUARDRAIL
SUPPORT
LEFT LADDER
RIGHT LADDER
PARTS IDENTIFICATION
FIGURE
BED END
BED END
BED END
BED END
UPPER
SIDE RAIL
LOWER
SIDE RAIL
STILE
STILE
PARTS IDENTIFICATION
B2 (BOX2)
QTY PART NAME
K
1PC
1PC
1PC
LADDER STEP
L
M
B3 (BOX3)
CENTER RAIL
LOWER BED
EXTENSION
UPPER BUNK
N
ROLL SLAT
(14PCS)
LOWER BUNK
ROLL SLAT
(14PCS)
1PC
O
HARDWARE IDENTIFICATION
Z - B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 461147 (B2)
HARDWARE NAME
LONG BOLT
2PCS
2PCS
4PCS
2PCS
1PC
1PC
1
(1/4 x 80mm Ø15 - BLK)
HAFT ROUND NUT
2
(1/4 x15mm - BLK)
SHORT BOLT
3
(1/4 x35mm Ø12 - BLK)
CYCLINDER NUT
4
(1/4 x 13mm Ø12 L14 - BLK)
HEX HEAD SCREW
5
(1/4 x 50mm Ø12 - BLK)
LONG FLAT HEAD SCREW
6
(4 x 35mm - BLK)
SHORT FLAT
HEAD SCREW
7
(4 x 15mm - BLK)
U BRACKET
8
(38 x 38 x 2mm -
WOOD DOWEL
9
(10 x 40mm - BLK)
METAL PIN
10
(12 x 125mm - BLK)
ALLEN WRENCH
11
(4 x 58mm - BLK)
BLK)
FIGURE
FIGURE
QTY
6PCS
2PCS
2PCS
1SET
1SET
QTY
24PCS
24PCS
16PCS
6PCS
12PCS
16PCS
20PCS
4PCS
16PCS
4PCS
1PC
PAGE 2 OF 8
www.coastercompany.com
Page 3
ASSEMBLY INSTRUCTIONS
UPPER BED END
STEP 1
H
G
A
G
E
E
H
B
4
9
1.1
11
1
2
1.2
11
LOWER BED END
STEP 2
8
F
7
3
D
2.2
L
7
2.1
F
C
PAGE 3 OF 8
2
1
11
9
www.coastercompany.com
Page 4
STEP 3
ASSEMBLY INSTRUCTIONS
M
STEP 4
4.1
3
4.2
10
10
PAGE 4 OF 8
www.coastercompany.com
Page 5
LADDER
STEP 5
ASSEMBLY INSTRUCTIONS
K
I
5
11
J
STEP 6
3
11
PAGE 5 OF 8
www.coastercompany.com
Page 6
STEP 7
ASSEMBLY INSTRUCTIONS
N
6
N
O
STEP 8
COMPLETE
PAGE 6 OF 8
www.coastercompany.com
Page 7
ITEM:
461147 (B1 - B3)
ASSEMBLY INSTRUCTIONS
SIZE OF MATTRESS
The length and width of the bunk mattress are as follow:
ThicknessWidthLength
Upper bunk 79" - 80" 37 1/2"
Lower bunk 79" - 80" 59 1/2" - 60 1/2" 6" Maximum
Ensure thickness of mattress does not exceed 6” and there must be at least 5” from mattress sleeping
surface to top edge of guardrail.
- 38 1/2" 6" Maximum
SAFETY WARNING
Follow the information on the warnings appearing1. on the upper bunk end structure and on the
carton. Do not remove the warning label from bed.
Always use the recommended size mattress or matt2. ress support or both to help prevent the
likelihood of entrapment or falls.
Surface of mattress must be at least 5 in. (1273. mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to us4. e the upper bunk.
Prohibit more than one person on upper bunk.5.
Periodically check and ensure that the guardrail6. , ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and p7. rohibit jumping on the bed.
Always use the ladder for entering and leaving t8. he upper bunk.
Do not use substitute parts. Contact the manufac9. turer or dealer for replacement parts.
Use of a night light may provide added safety p10. recaution for a child using upper bunk.
Always use guardrails on both long sides of the11. upper bunk. If the bunk bed will be placed next
to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
The use of water or sleep flotation mattress is12. prohibited.
Keep these instructions for future reference.13.
STRANGULATION HAZARD:
Never attach or hang items to any part of the b14. unk bed that are not designed for use with the bed
for example, but not limited to hooks, belts, and jump ropes.
REPLACEMENT PARTS:
Replacement parts, including additional guardrails may be obtained from any COASTER
Furniture Dealer.
PAGE 7 OF 8
www.coastercompany.com
Page 8
ITEM:
461147 (B1 - B3)
ASSEMBLY INSTRUCTIONS
PAGE 8 OF 8
www.coastercompany.com
Loading...